Answer:
10.3 grams
Explanation:
The balanced equation shows that 1 mole of Cl2 reacts with 2 moles of NaBr. To find out how much Cl2 is required to react with 30 grams of NaBr, we need to convert grams to moles.
First, we need to find the molar mass of NaBr:
NaBr = 23 + 79.9 = 102.9 g/mol
Now we can calculate the number of moles of NaBr:
30 g NaBr ÷ 102.9 g/mol = 0.291 moles NaBr
From the balanced equation, we know that 1 mole of Cl2 reacts with 2 moles of NaBr. Therefore, we need half as many moles of Cl2 as we have moles of NaBr:
0.291 moles NaBr ÷ 2 = 0.1455 moles of Cl2
Finally, we can convert moles of Cl2 to grams using its molar mass:
Cl2 = 35.5 x 2 = 71 g/mol
0.1455 moles Cl2 x 71 g/mol = 10.3 grams of Cl2
Therefore, 10.3 grams of Cl2 are required to react completely with 30 grams of NaBr in this reaction.
the first ionization energy for gold is 890.1 kj/mole. is electromagnetic radiation with a wavelength of 600 nm capable of ionizing (removing an electron) a gold atom in the gas phase? explain your answer.
No, electromagnetic radiation with a wavelength of 600 nanometers (nm) is not capable of ionizing a gold atom in the gas phase. This is because the first ionization energy of gold is 890.1 kilojoules per mole (kj/mol), and ionization of any atom or molecule requires energy equal to or greater than its ionization energy.
Ionization energy is the minimum energy required to remove an electron from an atom or molecule in the gas phase. Each element has its own specific ionization energy, and for gold it is 890.1 kj/mol. This means that the amount of energy that needs to be applied to remove an electron from a gold atom in the gas phase is 890.1 kj/mol.
Electromagnetic radiation is composed of photons of light with different wavelengths, and the energy of each photon depends on its wavelength. The energy of a photon with a wavelength of 600 nm is only 5.96 x 10^-19 joules. This is far less than the energy required to ionize a gold atom, which is 890.1 kj/mol, or 8.90 x 10^-17 joules. Therefore, electromagnetic radiation with a wavelength of 600 nm is not capable of ionizing a gold atom in the gas phase.
Know more about electromagnetic radiation here:
https://brainly.com/question/10759891
#SPJ11
angela has an unknown quantity of gas held at a temperature of 2300 K in a container with a volume of 19 L and a pressure of 6.00 atm. How many moles of gas does angela have? a. what equation will you use? b. show all your work.
four samples of solution where analysed and the following were collected: anion added observation s2- nothing so42- precipitate oh- nothing co32- precipitate which one of the following group ii cations is found in the unknown solution?
Based on the observations provided, the unknown solution contains a Group II cation that forms a precipitate with SO₄²⁻ and CO₃²⁻, but not with S₂⁻ and OH⁻. This action is likely to be Barium (Ba²⁺) or strontium (Sr²⁺).
1. S₂⁻ doesn't form a precipitate, eliminating Hg²⁺ and Cd²⁺.
2. SO₄²⁻ forms a precipitate, indicating the presence of Ba²⁺, Sr₂+, or Pb²⁺.
3. OH⁻ doesn't form a precipitate, eliminating Sr²⁺ and Pb²⁺.
4. CO₃²⁻⁻ forms a precipitate, which confirms the presence of Ba²⁺, Sr²⁺
Group II cations include calcium (Ca²⁺), strontium (Sr²⁺), and barium (Ba²⁺). Among these, both strontium and barium form precipitates with sulfate and carbonate anions, while calcium only forms a precipitate with carbonate anions.
Therefore, based on the observations provided, the unknown solution most likely contains either strontium or barium cations. Without additional information or tests, it is not possible to determine which of these cations is present in the solution.
Learn more on Barium here.https://brainly.com/question/26873446
#SPJ11
cola has a ph of about 3.0. if a cola has a concentration of h2co3 of 0.005m, what is the concentration of hco- g
cola has a ph of about 3.0. if a cola has a concentration of h2co3 of 0.005m then the concentration of HCO- ions is 1.58 x 10-4 M.
The given information is that a cola has a pH of about 3.0 and its H2CO3 concentration is 0.005M.
We have to determine the concentration of HCO- ions.
Given below is the balanced equation for the dissociation of carbonic acid
(H2CO3):H2CO3 → H+ + HCO-
pKa = 6.4 The dissociation constant, Ka can be calculated from the pKa as shown below:
Ka = 10(-pKa)Ka = 10(-6.4)Ka = 2.51 x 10-7
Now, we can write the equation for the ionization of H2CO3 as shown below:
H2CO3 + H2O → H3O+ + HCO3-
Here, the equilibrium constant, Ka can be defined as shown below:
Ka = [H3O+] [HCO3-] / [H2CO3]
Now, we can substitute the equilibrium concentrations in the above equation as shown below:
2.51 x 10-7 = [x] [x] / [0.005 - x]
On solving this equation, we get the value of x as 1.58 x 10-4 M.
Therefore, the concentration of HCO- ions is 1.58 x 10-4 M.
For more such questions on concentration , Visit:
https://brainly.com/question/28564792
#SPJ11
in a 55.0-g aqueous solution of methanol, ch4o, the mole fraction of methanol is 0.100. what is the mass of each component?
The mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g. when the mole fraction of methanol is 0.100.
The mass of each component in a 55.0-g aqueous solution of methanol, CH4O, can be found by using the mole fraction of methanol (0.100).
First, calculate the total number of moles of the solution:
55.0 g x (1 mol/32.04 g) = 1.72 moles
Then, calculate the number of moles of methanol:
1.72 moles x (0.100 mole fraction) = 0.172 moles
Finally, calculate the mass of each component:
Methanol mass: 0.172 moles x (32.04 g/mol) = 5.53 g
Water mass: 1.72 moles - 0.172 moles = 1.55 moles x (18.02 g/mol) = 27.91 g
Therefore, the mass of methanol in a 55.0-g aqueous solution of methanol, CH4O, is 5.53 g and the mass of water is 27.91 g.
For more such questions on mass , Visit:
https://brainly.com/question/1838164
#SPJ11
How many moles are in 6. 4 x 1024 molecules of HBr?
There are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.
The chemical formula of hydrogen bromide is HBr. A mole is a unit of measurement that expresses the amount of a chemical substance that includes a fixed number of units of that substance. One mole of a substance is equal to the Avogadro number or 6.022 x 10²³ of that substance.In this problem, we need to figure out how many moles are in 6.4 x 10²⁴ molecules of HBr. We'll start by using Avogadro's number to convert the number of molecules to moles.
According to Avogadro's number, 6.022 x 10²³ molecules are in one mole.
Therefore, to figure out how many moles there are in 6.4 x 10²⁴ molecules,
we will use the following formula:
moles = number of molecules ÷ Avogadro's numbermoles = 6.4 x 10²⁴ ÷ (6.022 x 10²³)moles = 1.06 moles
So, there are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.
For more such questions on hydrogen bromide, click on:
https://brainly.com/question/20460954
#SPJ11
the identity of an unknown monoprotic organic acid is determined by titration. a 0.173 g sample of the acid is titrated with 0.157 m naoh. what is the molar mass of the compound if 6.12 ml of the naoh solution is required to neutralize the sample?
The molar mass of the unknown monoprotic organic acid is 180.0 g/mol. by titration. If 6.12 ml of the naoH solution is required to neutralize the sample.
In order to determine the molar mass of the unknown monoprotic organic acid, follow the steps given below:
Step 1:
Calculate the number of moles of NaOH used in the titration by using the formula given below:
n(NaOH) = M(NaOH) × V(NaOH)
= 0.157 mol/L × 0.00612 L
= 9.62 × 10^-4 mol
Step 2:
Calculate the number of moles of the acid used in the titration by using the formula given below:
n(acid) = n(NaOH)
= 9.62 × 10^-4 mol
Step 3:
Calculate the mass of the acid used in the titration by using the formula given below:
mass(acid) = n(acid) × M(acid) = 0.173 gM(acid) = mass(acid) / n(acid)
= 0.173 g / 9.62 × 10^-4 mol
= 180.0 g/mol
Therefore, the molar mass of the unknown monoprotic organic acid is 180.0 g/mol.
For more such questions on molar mass , Visit:
https://brainly.com/question/21334167
#SPJ11
i need this quickly.
The completed table of the isotopes of the given elements is found in the attachment.
What are isotopes?Isotopes are variations of chemical elements that have a varying number of neutrons but the same number of protons and electrons. In other words, isotopes are different forms of the same element that have different amounts of nucleons (the sum of protons and neutrons) because of variations in the total number of neutrons in each of their individual nuclei.
For instance, the carbon atoms carbon-14, carbon-13, and carbon-12 all exist. A sum of 8 neutrons are present in carbon-14, 7 neutrons are present in carbon-13, and 6 neutrons are present in carbon-12.
Learn more about isotopes at: https://brainly.com/question/14220416
#SPJ1
barium has a density of and crystallizes with the body-centered cubic unit cell. calculate the radius of a barium atom.
The radius of a barium atom is 2.68 Å.
Barium is a chemical element that is silvery-white in color and can be found in the periodic table with the symbol Ba.
The density of barium is 3.51 g/cm3, and it has a body-centered cubic unit cell that crystallizes.
Determine the length of the edge of the unit cell. Since barium has a body-centered cubic unit cell, the length of the edge of the unit cell:
Edge length = 4r /√3
Where r is the radius of the atom.
The volume of the unit cell using the formula:
Volume of unit cell = Edge length³
The number of atoms present in the unit cell. Since barium has a body-centered cubic unit cell, the number of atoms present in the unit cell :
Number of atoms in the unit cell = 2
The mass of a single atom of barium using the formula:
Mass of a single atom = Density of barium / Avogadro’s number
Where Avogadro’s number is 6.02 × 10²³ atoms/mol.
The radius of a barium atom using the formula:
Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³
The radius of the barium atom :
Edge length = 2r√3
r = (Edge length) / 2√3
Volume of the unit cell = (Edge length)³
Number of atoms in the unit cell = 2
Mass of a single atom = Density of barium / Avogadro’s number
Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³
Therefore, the radius of a barium atom is 2.68 Å.
to know more about barium refer here:
https://brainly.com/question/30888146#
#SPJ11
a gas has a volume of 91 ml at a temperature of 91oc. what is the volume of the gas if the temperature is reduced to 0oc at constant pressure?
If the temperature of the gas is reduced from 91°C to 0°C at constant pressure, the volume of the gas will decrease from 91 ml to 68.5 ml.
A gas has a volume of 91 ml at a temperature of 91°C. Use the combined gas law, which is a variation of the ideal gas law that holds pressure constant while allowing for changes in volume and temperature.
V1/T1 = V2/T2P = constant
Where V1 is the initial volume of the gas, T1 is the initial temperature of the gas, V2 is the final volume of the gas, T2 is the final temperature of the gas, and P is the constant pressure that the gas is held at.
We'll begin by plugging in the values that we know. V1 = 91 ml, T1 = 91°C, P = constant, V2 = ?, T2 = 0°C.
We can simplify the temperature values by converting them to Kelvin, since Kelvin is the temperature scale that is used in the gas laws. To convert Celsius to Kelvin, we simply add 273 to the Celsius value.
T1 = 91°C + 273 = 364 KT2 = 0°C + 273 = 273 KNow we can plug in the values and solve for V2. V1/T1 = V2/T2(91 ml)/(364 K) = V2/(273 K)Simplifying this equation, we get:V2 = (91 ml)(273 K)/(364 K)V2 = 68.5 ml
to know more about temperature refer here:
https://brainly.com/question/15267055#
#SPJ11
a conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules
A conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules. This statement is true.
What Is A Conductor?The given statement "a conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules" is true because a conductor is distinguished from an insulator with the same number of atoms by the number of nearly free electrons. A conductor is a substance that easily transmits heat or electricity through it. The reason why conductors do that is that they have free electrons available in their outer shells, so when a voltage is applied to them, the free electrons become excited and start to flow. On the other hand, an insulator is a substance that does not allow electricity or heat to flow through it. Insulators have a high amount of resistance, which means that they do not allow electrical current to pass through them.
The question was incomplete, but most probably your question was:
A conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules (True/False)
Learn more about a conductor at https://brainly.com/question/24154868
#SPJ11
because they deliver nicotine in the form of vapor rather than smoke, e-cigarettes do not produce toxic chemicals like formaldehyde. group of answer choices true false
Because they deliver nicotine in the form of vapor rather than smoke, e-cigarettes do not produce toxic chemicals like formaldehyde. False. Nicotine is a harmful and addictive drug. The liquid nicotine solution used in e-cigarettes contains toxic chemicals that are harmful to human health
E-cigarettes are battery-powered devices that produce vapors by heating an e-liquid solution. Vaping is a popular method for consuming nicotine since it is smokeless and does not produce ash. Despite the fact that e-cigarettes are advertised as a safer alternative to traditional cigarettes, they are not. There are a number of ways in which e-cigarettes can cause harm. For starters, e-cigarettes are still harmful since they deliver nicotine to the body, which is a highly addictive drug that can have a number of health consequences.
Nicotine is a highly addictive drug that can cause a variety of health problems. Some of the risks of nicotine consumption include increased blood pressure, an increased heart rate, and an increased risk of heart attack and stroke. Nicotine may also impair brain development in teenagers and young adults, as well as causing harm to unborn children in pregnant women.There is also evidence to suggest that e-cigarettes can cause lung damage.
Formaldehyde and other toxic chemicals have been discovered in some e-cigarette vapor. The risks of e-cigarettes are much higher when compared to other nicotine replacement therapies like nicotine gum or patches.In conclusion, since e-cigarettes can contain toxic chemicals like formaldehyde, the statement "because they deliver nicotine in the form of vapor rather than smoke, e-cigarettes do not produce toxic chemicals like formaldehyde" is false.
Learn more about nicotine at:
https://brainly.com/question/15241838
#SPJ11
oxalic acid, h2c2o4, occurs as the potassium or calcium salt in many plants, including rhubarb and spinach. an aqueous solution of oxalic acid is 0.580 m h2c2o4. the density of the solution is 1.022 g/ml. what is the molar concentration?
The molarity (M) of the solution is then given as,M = n / V = 0.580 moles of H2C2O4/L
Oxalic acid occurs as the potassium or calcium salt in many plants, including rhubarb and spinach. Aqueous solution of oxalic acid is 0.580 M H2C2O4. The density of the solution is 1.022 g/ml. To find the molar concentration, we need to know the formula relating the number of moles of solute to the volume of the solution.Let us first convert the density of the solution to grams per liter.1.022 g/ml = 1022 g/LThe molarity (M) is defined as the number of moles of solute (n) dissolved per liter of solution (V).M = n / VThe number of moles of solute (n) is obtained by multiplying the volume of the solution (V) with the molar concentration (C).n = C x VSubstitute the known values and calculate the number of moles of H2C2O4.n = 0.580 M x 1 L = 0.580 moles of H2C2O4/L
The molarity (M) of the solution is then given as,M = n / V = 0.580 moles of H2C2O4/LNote: It is important to remember to include the units in your final answer.
Learn more about Molarity (M)
brainly.com/question/19279364
#SPJ11
in your procedure, you are directed to reheat your test tube if the ratio of k to o is close to 1:2. explain why you are directed to do this.
Reheating the test tube can help ensure that the reaction proceeds to completion and that the desired product is obtained.
If the reaction has not fully occurred, it may be because the temperature is not high enough to provide sufficient energy for the reaction to complete.
Reheating the test tube would increase the temperature of the reactants, and this increase in temperature would provide more kinetic energy to the metal and oxygen molecules, causing them to collide with greater frequency and higher energy.
This would increase the likelihood of successful collisions and promote the completion of the reaction.
Thus, it is been directed to reheat your test tube.
Learn more about the Heating of compounds here:
brainly.com/question/6038954
#SPJ11
the gas in a 225.0 ml piston experiences a change in pressure from 1.00 atm to 2.90 atm. what is the new volume (in ml) assuming the moles of gas and temperature are held constant? 7 7 . 5 9
Answer: The new volume of gas in the piston is 77.59 ml.
Given,Initial volume of gas in the piston = 225.0 ml Initial pressure of gas in the piston = 1.00 atmM Final pressure of gas in the piston = 2.90 atm. We have to find out the new volume of gas in the piston. Assuming that the moles of gas and temperature are held constant, we can use Boyle's Law to solve this problem.
Boyle's Law states that for a given amount of gas kept at a constant temperature, the volume of the gas is inversely proportional to its pressure. Mathematically, it can be represented as P1V1 = P2V2 where,P1 is the initial pressure of gasV1 is the initial volume of gas P2 is the final pressure of gas V2 is the final volume of gas
Let's substitute the given values in the above equation. P1V1 = P2V2225.0 × 1.00 = 2.90 × V2V2 = (225.0 × 1.00)/2.90V2 = 77.59 ml
Know more about Boyle's Law here:
https://brainly.com/question/30367067
#SPJ11
the half-life of carbon is 5730 years. if you start with 724.8g of carbon, what mass of carbon will remain after 5730 years? please answer in grams and report your answer to one place past the decimal.
The mass of carbon that will remain after 5730 years is 362.4 grams.
The decay of carbon-14 follows first-order kinetics. The half-life of carbon-14 is 5730 years, which means that in 5730 years, half of the initial amount of carbon-14 will decay.
This can be expressed as:
[tex]N = N_0/2^{(t/T)}[/tex]
where:
[tex]N_0[/tex] is the initial amount of carbon
N is the final amount of carbon after t years
T is the half-life of carbon
In this case, we want to find the amount of carbon-14 remaining after one half-life, which is 5730 years. Therefore, we can substitute N0 = 724.8 g, t = 5730 years, and T = 5730 years into the equation:
We can substitute the given values into the formula:
[tex]N = 724.8/2^{(5730/5730)}[/tex]
= 362.4 g
Therefore, after one half-life, 362.4 g of carbon will remain.
To learn more about Half-Life refer: https://brainly.com/question/14220374
#SPJ11
a piece of tin foil has a volume of 0.645 mm3. if the foil measures 10.0 mm by 12.5mm, what is the thickness of the foil? group of answer choices 0.000 516 mm 80.6 mm 0.005 16 mm 0.0516 mm 194 mm
Answer: The thickness of the foil is 0.0516 mm.
To find this, we can use the formula for finding the volume of a rectangular prism, which is V = l x w x h. We are given the volume (V = 0.645 mm3) and the length (l = 10.0 mm) and width (w = 12.5 mm). Rearranging the formula gives us h = 0.645 mm3 / (10.0 mm x 12.5 mm) = 0.0516 mm.
Therefore, the thickness of the foil is 0.0516 mm. This answer was selected from the group of answer choices provided in the question (0.000 516 mm, 80.6 mm, 0.005 16 mm, 0.0516 mm, and 194 mm).
Learn more about thickness of the foil here:
https://brainly.com/question/13586529#
#SPJ11
the addition of low ionic strength solution (liss) to the testing environment when performing an indirect antiglobulin test is designed to do what?
The addition of low ionic strength solution (LISS) to the testing environment when performing an indirect antiglobulin test is designed to enhance the speed and sensitivity of the test.
The LISS solution reduces the time required for the agglutination reaction to occur between the patient's red blood cells (RBCs) and antiglobulin reagent (Coombs reagent).This reagent is an anti-human globulin (AHG) that attaches itself to the antibodies present on the RBCs' surface. The test is an indirect antiglobulin test, which involves incubating the patient's RBCs with a known anti-human globulin. The LISS solution's addition to the testing environment increases the speed and sensitivity of the test. It also helps in reducing the reaction time and helps detect antibodies that are present in low concentrations.
The LISS solution enhances the sensitivity of the antiglobulin test by reducing the ionic strength of the testing environment. This solution neutralizes the ionic charges on the surface of the RBCs, allowing the AHG to attach itself to the RBCs' antigens more efficiently. This, in turn, promotes more efficient agglutination and quicker antibody detection during the indirect antiglobulin test.
Learn more about antiglobulin test at:
https://brainly.com/question/30707881
#SPJ11
Question at position 1
What is the pressure of gas if 2.89-g of CO2 sublimates in a 9.60-L container at 255.22K
1.63atm is the required pressure of the given gas.
The concept of ideal gas lawTo calculate the pressure of gas using the ideal gas law, we need to use the formula:
PV = nRT
where:
P = pressure of gasV = volume of gasn = number of moles of gasR = gas constant (0.08206 L·atm/mol·K)T = temperature of gas in KelvinFirst, we need to calculate the number of moles of CO2 using the given mass and molar mass:
n = m/M
where:
m = mass of CO2 = 2.89 g
M = molar mass of CO2 = 44.01 g/mol
n = 2.89 g / 44.01 g/mol = 0.0657 mol
Next, we can plug in the values into the ideal gas law and solve for pressure (P):
PV = nRT
P = nRT / V
P = (0.0657 mol) (0.08206 L·atm/mol·K) (255.22 K) / 9.60 L
P = 1.63 atm
Therefore, the pressure of the gas is 1.63 atm.
Learn more on ideal gas law here:https://brainly.com/question/25290815
#SPJ1
what is the mass percent of carbon in decane c {10}h {22}? use two decimal places in atomic masses. only give the numeric value of your answer.
The mass percent of carbon in decane, C{10}H{22}, is 12.11%.
This can be determined by using the atomic mass of each element. Carbon has an atomic mass of 12.01 and Hydrogen has an atomic mass of 1.008.
When calculating the mass percent, you must first determine the total molar mass of the compound.
The total molar mass of decane is calculated by multiplying the atomic mass of each element by the number of atoms of that element in the molecule.
For example, the total molar mass of decane is calculated by multiplying 12.01 (atomic mass of carbon) by 10 (the number of carbon atoms) and 1.008 (atomic mass of hydrogen) by 22 (the number of hydrogen atoms).
This yields a total molar mass of 142.256.
The mass percent of carbon can be determined by dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.
This is calculated by dividing 12.01 (atomic mass of carbon) by 142.256 (total molar mass of decane) and then multiplying by 100, which yields a mass percent of 12.11%.
The mass percent of carbon in decane, C{10}H{22}, is 12.11%.
This was determined by calculating the total molar mass of decane, which is 142.256, and then dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.
to know more about decane refer here:
https://brainly.com/question/28585062#
#SPJ11
calcium oxalate, cac2o4, is very insoluble in water. what mass of sodium oxalate, na2c2o4, is required to precipitate the calcium ion from 37.5 ml of 0.104 m cacl2 solution?
The mass of sodium oxalate, na2c2o4, is required to precipitate the calcium ion from 37.5 ml of 0.104 m cacl2 solution is 0.5226g.
Calcium oxalate is defined as an insoluble salt that remains as a residue containing calcium cations and oxalate anions. Calcium oxalate precipitation is generally used for quantitative calcium analysis in solutions of soluble calcium salts.
The Volume of calcium chloride solution is 37.5 mL
The Concentration of calcium chloride solution is 0.104 M.
he moles of calcium chloride in 37.5 mL of the solution are calculated as follows:
n CaCl2 = 0.104M×(37.5×10−3)L
=0.0039 mole
Calcium oxalate can be precipitated from calcium chloride using the balanced equation:
CaCl2(aq.) + Na2C2O4(aq. )→ 2NaCl(aq.) + CaC2O4(s)
So we get that one mole of sodium oxalate is required to precipitate calcium from one mole of calcium chloride solution that is 1 mole sodium oxalate: 1 mole calcium chloride.
The moles of sodium oxalate required to precipitate calcium from 0.0039 moles of calcium chloride can be calculated as,
n Na2C2O4 = 1 mole of Na2C2O4 / 1moleCaCl2 ×0.0039molCaCl2
=0.0039mole
So the mass of sodium oxalate having molar mass of 134 g/mole is calculated as,
m Na2C2O4 =0.0039mol × 134g/mole
=0.5226g
To learn more about mass
https://brainly.com/question/1838164
#SPJ4
what is the percent by volume of 50.00ml of a 50% nacl solution added to more solvent to make 120.oo ml of solution
The percent by volume of 50.00ml of a 50% NaCl solution added to more solvent to make 120.oo ml of solution is 20.83%.
Given,Initial volume of NaCl solution = 50.00mlInitial % of NaCl solution
= 50%Final volume of NaCl solution
= 120.00ml
Formula to calculate final % volume of NaCl solution = [(Initial volume of NaCl solution/ Final volume of NaCl solution) x Initial % of NaCl solution]
Accordingly, [(50.00ml/120.00ml) x 50%]
Final % of NaCl solution = 20.83%
Therefore, the percent by volume of 50.00ml of a 50% NaCl solution added to more solvent to make 120.oo ml of solution is 20.83%.
To know more about percent by volume click on below link:
https://brainly.com/question/28800281#
#SPJ11
what technique is used in this investigation? group of answer choices colorimetry calorimetry gas pressure measurements titration combustion analysis
The technique used in this investigation is titration.
Titration is a laboratory method used to determine the amount or concentration of a substance in a sample. A reagent, known as the titrant, is added to a solution to react with the substance being studied, known as the analyte. The titration endpoint is determined by observing an indicator's colour change or by performing a calculation.
Titration is a common method used in analytical chemistry for quantifying analytes' concentrations. Acid-base titrations, redox titrations, and complexometric titrations are some of the most common types of titrations used in chemistry labs. Titration is used to calculate the amount of acid, base, salt, or other substance in a sample.
Learn more about titration at:
https://brainly.com/question/13307013
#SPJ11
Need help I’ll give points
The purpose of the experiment is to observe the effects of natural selection on the populations of different types of organisms in simulated environments.
What are responses to other questions?2. The independent variable is the type of organism or trait being observed, and the dependent variable is the number or frequency of organisms with that trait after a certain time. The control variables include the initial number of organisms and the duration of the tests.
3. A hypothesis based on observations and scientific principles should be written. For example, if observing the effect of camouflage on moth populations, a hypothesis could be: "Moths with better camouflage will survive and reproduce at a higher rate, leading to an increase in the frequency of the camouflaged trait in the population over time."
4. Experimental Methods: Describe the tools used to collect data. For example, a counting sheet and a calculator.
5. Describe the procedure followed to conduct the experiment, including setting up the simulated environment, releasing the organisms, and recording the number or frequency of organisms with a certain trait over time.
6. Data and Observations: Record observations of the initial number of organisms and the number or frequency of organisms with a certain trait after each test.
7. Create a table to organize the data collected. The table should include the type of organism or trait being observed, the initial number of organisms, and the number or frequency of organisms with that trait after each test.
Conclusions:
Draw conclusions about how natural selection leads to increases and decreases of specific traits in populations over time. Provide an evidence-based claim that is supported by the data collected.
For example, "Organisms with advantageous traits have a better chance of surviving and reproducing, leading to an increase in the frequency of those traits in the population over time."
Make a prediction about what would happen if one of the variables in the experiment was changed. Explain the prediction using a cause-and-effect relationship based on the observations and scientific principles.
For example, "If the simulated environment was changed to have a different type of predator, the frequency of the camouflaged trait may change, as the predator may have different visual sensitivities that make different colors or patterns more or less visible."
learn more about natural selection: https://brainly.com/question/23929271
#SPJ1
The complete part of the question in the picture
Adaptations and Population Changes
It’s time to complete your Lab Report. Save the lab to your computer with the correct unit number, lab name, and your name at the end of the file name (e.g., U2_ Lab_AdaptationsAndPopulationChanges_Alice_Jones.doc).
Introduction
1. What was the purpose of the experiment?
Type your answer here:
2. What were the independent, dependent, and control variables in your investigation? Describe the variables for the simulation with the moths and birch trees.
Type your answer here:
3. Write a hypothesis based on observations and scientific principles.
Experimental Methods
1. What tools did you use to collect your data?
2. Describe the procedure that you followed to conduct your experiment.
Type your answer here:
Data and Observations
1. Record your observations.
Type your answer here:
Table 1. Number of Moths in Birch Tree Simulation
Type of moth (color) Initial number of moths Number of moths after test 1 Number of moths after test 2 Number of moths after test 3
Pink and yellow 5
Blue and white 5
White with black spots 5
Black with white spots 5
Table 2. Number of Moths in Flower Simulation.
Type of moth (color) Initial number of moths Number of moths after test 1 Number of moths after test 2 Number of moths after test 3
Pink and yellow 5
Blue and white 5
White with black spots 5
Black with white spots 5
Conclusions
1. What conclusions can you draw about how natural selection leads to increases and decreases of specific traits in populations over time? Write an evidence-based claim.
Type your answer here:
2. Predict what would happen to the number of each type of moth if the pink flowers were replaced with blue ones. Explain your prediction using a cause-and-effect relationship.
g which of the following has the highest boiling point? a. propanal b. ethanal c. butanal d. methanal
The compound with the highest boiling point is Propanal (a). The boiling point of Propanal is -22.8 °C, Ethanal (b) is -13.4 °C, Butanal (c) is -11.7 °C and Methanal (d) is -11.3 °C.
Assuming that the boiling points of the compounds are actually positive values, we can determine which compound has the highest boiling point based on the given data. Boiling point is influenced by various factors, including molecular weight, molecular structure, and intermolecular forces.
In general, compounds with higher molecular weights tend to have higher boiling points, as they have more massive molecules that require more energy to overcome the intermolecular forces holding them together.
Additionally, compounds with stronger intermolecular forces, such as hydrogen bonding or van der Waals forces, also tend to have higher boiling points.
Based on their molecular formulas, propanal (a), ethanal (b), butanal (c), and methanal (d) are aldehydes with different chain lengths. Propanal has three carbon atoms, ethanal has two carbon atoms, butanal has four carbon atoms, and methanal has one carbon atom.
Assuming that the boiling points provided are corrected to positive values, we can conclude that propanal (a) with a boiling point of -22.8 °C would have the highest boiling point among the compounds listed, as it has the longest carbon chain and would likely exhibit stronger intermolecular forces compared to the other aldehydes with shorter chain lengths.
Ethanal (b) would have the next highest boiling point, followed by butanal (c), and finally methanal (d) with the lowest boiling point among the compounds mentioned.
To know more about boiling point, refer here:
https://brainly.com/question/3441929#
#SPJ11
If 1 litre of 2.2m sulphuric acid is poured into a bucket containing 10 litres of water and the resulting solution is mixed thoroughly the resulting sulfuric acid concentration will be
the electronic configuration of O2−is2s22p6.
Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.
What is meant by electronic configuration?Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.
When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.
To know more about electronic configuration, refer
https://brainly.com/question/26084288
#SPJ1
in a solution of dichloromethane (ch2cl2) in 2-pentanone (ch3coc3h7), the mole fraction of dichloromethane is 0.350. if the solution contains only these two components, what is the molality of dichloromethane in this solution?
The molality of dichloromethane in this solution is 6.25 m.
The molality of dichloromethane in a solution of dichloromethane and 2-pentanone is calculated using the formula:
molality (m) = moles of solute (mol) / kilograms of solvent (kg)
In this case, the solute is dichloromethane (CH₂Cl₂) and the solvent is 2-pentanone (CH₃COC₃H₇). The mole fraction of dichloromethane is 0.350, so there are 0.350 moles of dichloromethane in one mole of the solution.
To get the mass of solvent, we need to convert the number of its moles to mass by multiplying it with its molar mass. The molar mass of 2-pentanone (CH₃COC₃H₇), is the sum of the atomic weights of each element, which is 86.13 g/mol. One mole of the solution contains 0.350 moles of dichloromethane and 0.650 moles 2-pentanone. Therefore, the mass of 2-pentanone is:
mass = moles x molar mass = 0.650 moles x 86.13 g/mol = 55.9845 g
Solving for the molality, we get:
m = 0.350 moles / (5.9845 g)(1 kg/1000g)
m = 6.25 mol/kg = 6.25 m
Learn more about molality here: https://brainly.com/question/24065939.
#SPJ11
how would the rf value of eugenol change if the mobile phase was changed to 40%ethyl acetate in hexanes? briefly explain your reasoning.
The RF value of eugenol will increase if the mobile phase is changed to 40% ethyl acetate in hexanes.
This is because the polarity of ethyl acetate is higher than that of hexanes, making it a better solvent for the eugenol to dissolve in. Therefore, the RF value will increase as the compound is able to move further up the TLC plate.
To illustrate, when the eugenol is placed on a TLC plate with a mobile phase consisting of 40% ethyl acetate in hexanes, the eugenol will dissolve in the ethyl acetate and migrate towards the top of the plate.
The RF value is the distance that the solvent front has traveled, in relation to the distance traveled by the compound, so it will be higher when the compound has been able to move further up the plate.
In conclusion, the RF value of eugenol will increase when the mobile phase is changed to 40% ethyl acetate in hexanes due to the higher polarity of the ethyl acetate, allowing the compound to move further up the TLC plate.
To know more about RF value refer here:
https://brainly.com/question/31117352#
#SPJ11
A sample of glucose reacts in anaerobic respiration. The right-hand box below shows a particle diagram of the moles of substances present after the reaction is complete.
On a piece of paper draw the "Before" box as shown and draw a particle diagram of the reactant molecules that produced the mixture shown on the right.
The balanced equation for anaerobic respiration that would obviously fit the model is; C6H12O6 ---->2C2H5OH + 2CO2
What is the equation of anaerobic respiration?The equation for anaerobic respiration (in the absence of oxygen) in humans and animals is:
Glucose → Lactic Acid + Energy (ATP)
The equation for anaerobic respiration (in the absence of oxygen) in plants and some microorganisms is:
Glucose → Ethanol + Carbon Dioxide + Energy (ATP).
Hence, we can see that this is way that anaerobic respiration occurs.
Learn more about anaerobic respiration:https://brainly.com/question/12605249
#SPJ1