for the reaction, determine how many moles of chlorine cl2 would be needed to react with 3 moles of phosphorus p4 to entirely use up all the phosphorus

Electron drift speed is the speed at which an electron moves through a conductor when a voltage is applied across it. To calculate electron drift speed:

v = (I/nAq),

where v is the electron drift velocity, I is the current flowing in the conductor, n is the number of free electrons per unit volume of the conductor, A is the cross-sectional area of the conductor, and q is the charge of an electron.

For copper, the number of free electrons per unit volume (n) = 8.5 x 10^22 /cm^3,

cross-sectional area (A) = 1 cm^2.

The charge of an electron (q) = 1.6 x 10^-19 C.

Therefore, for electron drift speed:

v = (I/nAq)v

  = (I / (8.5 x 10^22 /cm^3 x 1 cm^2 x 1.6 x 10^-19 C))v

  = (I / 1.36 x 10^3 A/cm^2)

Assuming that the current flowing is 1 A,

v = (1 A / 1.36 x 10^3 A/cm^2)v

  = 7.35 x 10^-4 cm/s

Thus, the electron drift speed for copper can be calculated to be 7.35 x 10^-4 cm/s.

To know more about Electron drift speed:

https://brainly.com/question/15398174

#SPJ11

Answer:

choice number 3 (70° degrees)

Explanation:

here he is asking that how many degrees of water will boil when the surface of water in the liquid state is 30kPa. So when it is 30kPa becomes boiled at 70°degrees. Hope it helps you!

Answer: Hydrogen chloride is a diatomic molecule, consisting of a hydrogen atom H and a chlorine atom Cl connected by a polar covalent bond.

For standard 1, the volume of stock solution required is 2.00 mL, while for standard 2, it is 4.00 mL.

In order to calculate the volume of 0.0315 m Bromocresol green (HBCG) standard stock solution required to make 10.00 ml of the three standards, we need to use the formula:

M1V1 = M2V2

Where M1 is the concentration of the stock solution,

V1 is the volume of the stock solution required,

M2 is the concentration of the final solution, and

V2 is the final volume of the solution.

To calculate the volume of 0.0315 m Bromocresol green (HBCG) stock solution required to make 10.00 ml of 0.00630 m Bromocresol green (HBCG) standard 1, we can plug in the values into the formula as:

M1V1 = M2V2V1 = (M2V2)/M1= (0.00630 mol/L x 0.01000 L)/0.0315 mol/L= 0.00200 L = 2.00 mL

Therefore, the volume of 0.0315 m Bromocresol green (HBCG) stock solution required to make 10.00 ml of 0.00630 m Bromocresol green (HBCG) standard 1 is 2.00 mL.

To calculate the volume of 0.0315 m Bromocresol green (HBCG) stock solution required to make 10.00 ml of 0.0126 m Bromocresol green (HBCG) standard 2, we can use the same formula as above:

M1V1 = M2V2V1 = (M2V2)/M1= (0.0126 mol/L x 0.01000 L)/0.0315 mol/L= 0.00400 L = 4.00 mL

Therefore, the volume of 0.0315 m Bromocresol green (HBCG) stock solution required to make 10.00 ml of 0.0126 m Bromocresol green (HBCG) standard 2 is 4.00 mL.

In conclusion, we can use the formula M1V1 = M2V2 to calculate the volume of 0.0315 m Bromocresol green (HBCG) stock solution required to make different standards.

To know more about stock solution here

https://brainly.com/question/25256765

#SPJ11

3,5,6 electron states are not possible.

The first state is possible, as it has an n value of 1 and an l value of 0, which corresponds to the 1s orbital.

The second state is possible, as it has an n value of 1 and an l value of 1, which corresponds to the 2p orbital. The third state is possible, as it has an n value of 2 and an l value of 1, which corresponds to the 3p orbital.

The fourth state is possible, as it has an n value of 2, an l value of 1, and an m value of 1, which corresponds to the 3px orbital. The fifth state is possible, as it has an n value of 2, an l value of 2, and an m value of 0, which corresponds to the 3dxy orbital.

The sixth state is not possible, as it violates the Pauli exclusion principle by having two electrons with the same set of quantum numbers. In particular, it has an n value of 3, an l value of 1, an m value of 1, and an ms value of -1/2, which is identical to the fourth state.

The Pauli exclusion principle states that no two electrons in an atom can have the same set of quantum numbers, and the fourth and sixth states have the same set of quantum numbers. Therefore, the sixth state is not possible.

To know more about Pauli exclusion principle click on below link:

https://brainly.com/question/30563805#

#SPJ11

Complete question

consider the six hypothetical electron states listed in the table. which, if any, of these states are not possible?

n l m m s

1 0 0 +1/2

1 1 0 +1/2

2 1 0 -1/2

2 1 1 +1/2

2 2 0 -1/2

3 1 1 -1/2

Answer: The pH of a 0.138 M solution of H3PO4 (assuming complete dissociation for the sake of the example) is 1.49.

The following steps can be used to determine the pH of the solution.

Phosphoric acid is a triprotic acid, which means that it can donate three hydrogen ions (H+) to a solution. Phosphoric acid's first dissociation reaction is as follows:

H3PO4(aq) → H+(aq) + H2PO4-(aq) This means that in water, H3PO4 will donate one hydrogen ion (H+) to the solution, leaving behind the negatively charged H2PO4- ion.

To determine the pH of the solution, we can use the formula:

pH = -log[H+]

First, we need to determine the concentration of H+ ions in the solution, which we can find from the dissociation of H3PO4. H3PO4(aq) → H+(aq) + H2PO4-(aq) Initially, the concentration of H3PO4 is 0.138 M. Since we're assuming complete dissociation for the sake of this example, we can say that 100% of the H3PO4 dissociates into H+ and H2PO4-.

This means that the concentration of H+ in the solution is equal to the initial concentration of H3PO4:0.138 MWe can now substitute this value into the pH formula:

pH = -log[H+]pH = -log[0.138]pH = 1.49

Therefore, the pH of the 0.138 M solution of H3PO4 (assuming complete dissociation for the sake of the example) is 1.49.

Learn more about ph level here:

https://brainly.com/question/1458045#

#SPJ11

Answer:

0.6096

Explanation:

*formula for moles= mass/molormass(RFM)

Molarmass= (28×1)+(19×4)= 104

63.4/104= 0.60961

There is no one method to evaluate machine learning (ML) models because everyone has their own way of calculating the accuracy percentage.

Machine learning is an ever-evolving field that requires a lot of data analysis and knowledge of mathematical and statistical principles. Evaluating machine learning models is a complex process, and there is no one-size-fits-all solution. There are various ways to evaluate the accuracy of ML models, and the best approach depends on the model's purpose, features, and size.

The following are some of the challenges of evaluating machine learning models:

Interpretability: One of the most significant challenges is interpretability. Many ML models are not explainable, making it difficult to interpret their performance metrics. This makes it challenging to identify any issues with the model and make appropriate adjustments.

Data quality: Machine learning models are only as good as the data they are trained on. It is essential to ensure that the data used to train and evaluate the model is of high quality and representative of the real-world environment.

Model selection: Choosing the right model for a particular task is another challenge. The model selection process depends on the data, available resources, and the goal of the project.

Hence, Several metrics can be used to evaluate the accuracy of ML models, including accuracy, precision, recall, F1 score, and AUC-ROC. Machine learning practitioners usually choose the best metric for a particular task or model depending on the data they have.

To know more about Machine Learning Models, refer here:

https://brainly.com/question/16042499#

#SPJ11

Octane can be represented in a variety of ways, depending on the type of chemistry equation being used. The most common representation of octane is C8H18.

This represents the fact that octane is a molecule composed of 8 carbon atoms and 18 hydrogen atoms.

It can also be represented as CH3(CH2)6CH3, which is the formula of octane's molecular structure - 3 carbon atoms in a row, with 6 carbon-hydrogen pairs in between.

Octane can also be represented as CH3CH2CH2CH2CH2CH2CH2CH3, which is a simplified way of writing the same molecular structure. All of these forms are correct representations of octane.

The most common way to represent octane is with the chemical formula C8H18. This chemical formula is an indication of the molecular structure of octane.

This chemical formula indicates that octane is composed of 8 carbon atoms and 18 hydrogen atoms.

These carbon and hydrogen atoms are connected together to form a molecule, with the bonds between the atoms being either single or double bonds.

Octane can also be represented as CH3(CH2)6CH3. This is a simplified version of the chemical formula C8H18, and it represents the molecular structure of octane.

The 8 carbon atoms and 18 hydrogen atoms are shown as 3 carbon atoms in a row, with 6 carbon-hydrogen pairs in between.

The hydrogen atoms are represented by the "CH2" part of the formula, while the carbon atoms are represented by the "CH3" part.

Octane can also be represented as CH3CH2CH2CH2CH2CH2CH2CH3.

This is another simplified version of the chemical formula C8H18, and it also represents the molecular structure of octane.

Each of the 8 carbon atoms is represented by the "CH3" part, while each of the 18 hydrogen atoms is represented by the "CH2" part.

This representation is often used to explain the structure of octane in a more visual way.

All of the above forms are valid representations of octane. Depending on the type of chemistry equation being used, any of the above forms can be used to represent octane.

to know more about octane refer here:

https://brainly.com/question/21268869#

#SPJ11

The species that should have the highest molar entropy at 298 K is CH4(g). The correct option is CH4.

Entropy is a measure of the amount of disorder or randomness in a system. In other words, it is a measure of the number of ways a system can be arranged while maintaining its energy state. It is represented by the symbol S.

The entropy of a pure crystalline substance is zero at absolute zero temperature because it has a well-defined, ordered, and rigid structure.

As temperature increases, the entropy of the substance increases because the molecules of the substance move more randomly and are distributed over a larger volume.

Entropy is highest for gases, followed by liquids and then solids. Molar entropy is a measure of the entropy of a substance per mole of the substance.

Molar entropy (S) is given by the equation:

S = ΔS/n

Where ΔS is the change in entropy and n is the number of moles of substance. At standard temperature and pressure, the molar entropy of a substance is represented by Sº.

The entropy of the given species at 298 K is as follows:

Thus, the species that should have the highest molar entropy at 298 K is CH4(g).

to know more about entropy refer here:

https://brainly.com/question/20166134#

#SPJ11

Yes, the response of temperature in the atmosphere to an increase in CO2 is generally consistent. As more CO2 is added to the atmosphere, it traps more heat from the sun, leading to a gradual increase in temperature. This phenomenon is known as the greenhouse effect.

The response of temperature in the atmosphere to an increase in CO2 does not always stay the same as the CO2 is progressively increased. It changes depending on various factors. This statement is backed up by scientific evidence.CO2 is known as a greenhouse gas that warms the Earth's atmosphere by absorbing and radiating energy within the infrared range.

When there is more CO2 in the atmosphere, there will be more radiation absorbed and radiated, resulting in a temperature increase.

Therefore, as the concentration of CO2 rises, the temperature of the Earth's atmosphere should also rise. However, the relationship between CO2 and temperature is not that simple.

Read more about temperature :

https://brainly.com/question/24746268

#SPJ11

Answer:

Relative Dating

Explanation:

Relative dating is used to arrange geological events, and the rocks they leave behind, in a sequence. The method of reading the order is called stratigraphy (layers of rock are called strata).

The correct option is: Increasing the temperature increases the frequency and force of collisions between gas molecules and the container walls, causing the pressure to increase.

When the temperature of a gas in a closed container is increased, the gas molecules gain kinetic energy and move faster, colliding with the container walls more frequently and with greater force.

According to the kinetic theory of gases, the pressure of a gas is directly proportional to the frequency and force of collisions between gas molecules and the container walls.

Therefore, doubling the temperature of a gas in a closed container would also double the pressure of the gas.

Learn more about gas laws at:

https://brainly.com/question/25290815

#SPJ1

Plants have cellulose-based cell walls, eukaryotic cells with large central vacuoles, and plastids such chloroplasts and chromoplasts. Therefore, the Graph is Represented by Cell Wall Structure Option D.

Parenchymal, collenchymal, and sclerenchymal cells are three different types of plant cells. The structure and function of the three categories vary.

Understanding the structure of the fungi's hard cell wall, which is necessary for their survival, may help researchers create novel antifungal medications. This wall encourages and presses the fungus to flourish without changing its properties.

The function of the cell walls of many protists, bacteria, and plants is similar to that of the fungal cell walls. In hypotonic situations, they stop cells from bursting, but in hypertonic ones, they can't stop cells from dying. A degree of physical environmental protection is also offered by these cell walls, which differ from plant cell walls in that they are made of cellulose in plants, as opposed to chitin in fungal cell walls.

Learn more about cell wall here

https://brainly.com/question/13600154

#SPJ1

The value of the constant, k, for this data is 51.5.

option D.

To determine the constant k, we can use the formula:

PV = k

where;

We can rearrange the formula to solve for k:

k = PV

Now, we can multiply the pressure and volume values for each data point to get the corresponding value of k:

For the first data point: k = 1.15 kg/cm² x 44.8 mL = 51.52

For the second data point: k = 1.24 kg/cm² x 41.5 mL = 51.40

For the third data point: k = 1.47 kg/cm² x 35.0 mL = 51.45

We can take the average of these values to get an overall value for k:

k = (51.52 + 51.40 + 51.45) / 3 = 51.46 ≈ 51.5

Learn more about constant here: https://brainly.com/question/27983400

#SPJ1

A  series of solutions with a range of precisely known analyte concentrations. Option D

A calibration curve is a graphical representation of the relationship between the concentration or amount of a substance, and a signal or measurement obtained from an analytical instrument or assay. The calibration curve is constructed by measuring the signal or response of the instrument or assay at different known concentrations or amounts of the substance, and plotting these values on a graph.

The resulting curve is then used to determine the concentration or amount of the substance in an unknown sample by measuring its signal or response and comparing it to the calibration curve.

Learn more about calibration curve:https://brainly.com/question/29729322

#SPJ1

These are all examples of chemical hazardous waste. Chemical hazardous waste is waste that is flammable, reactive, corrosive, or toxic. It can include things like unused pesticides, paint, cleaning products, or batteries.

Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of Household hazardous waste.What is hazardous waste?Hazardous waste is a waste material that is harmful to human health or the environment. Every year, households and businesses generate hazardous waste in various forms. Because hazardous waste may be flammable, poisonous, reactive, or corrosive, it requires special disposal procedures. Hazardous wastes must be properly disposed of to safeguard human health and the environment.Household hazardous waste (HHW) is the type of waste that can be found in a typical home. This waste is produced by households when they use products that contain harmful chemicals. Old ammunition or fireworks, lithium-sulfur batteries, wastes containing cyanides or sulfides, and chlorine bleach and ammonia are examples of household hazardous waste.

For more such questions on hazardous waste

https://brainly.com/question/4055432

#SPJ11

The molecular formula of the organic acid is C₂H₄O₄.

Assuming we have a 100 gram sample of the organic acid, we can calculate the masses of carbon, hydrogen, and oxygen present in the sample as follows:

Mass of C = 39.9 g

Mass of H = 6.7 g

Mass of O = 53.4 g

Next, we can convert these masses to moles using the atomic masses of each element,

Moles of C = 39.9 g / 12.01 g/mol = 3.32 mol

Moles of H = 6.7 g / 1.01 g/mol = 6.63 mol

Moles of O = 53.4 g / 16.00 g/mol = 3.34 mol

We then divide each mole value by the smallest mole value to get the simplest whole-number ratio of atoms,

Moles of C / Moles of O = 3.32 mol / 3.34 mol = 0.993

Moles of H / Moles of O = 6.63 mol / 3.34 mol = 1.98

Rounding these ratios to the nearest whole number gives us the empirical formula of the organic acid, which is C₁H₂O₂.

To find the molecular formula, we need to know the molar mass of the compound. We are given that the molar mass of the composition is 60.0 g/mol. The empirical formula C₁H₂O₂ has a molar mass of approximately 45.0 g/mol (1 × 12.01 g/mol for C, 2 × 1.01 g/mol for H, and 2 × 16.00 g/mol for O). To determine the molecular formula, we divide the molar mass of the compound by the molar mass of the empirical formula and round to the nearest whole number.

Molecular formula = (Molar mass of composition) / (Molar mass of empirical formula)

Molecular formula = 60.0 g/mol / 45.0 g/mol

Molecular formula = 1.33

Rounding this value to the nearest whole number, we get a molecular formula of C₂H₄O₄.

To know more about molecular formula, here

brainly.com/question/30630766

#SPJ4

Therefore, the correct answer is (E) The reaction would shift toward products and the solubility would increase.

Both hydrogen ions (H +) and chloride ions (Cl -) would be added to the equilibrium mixture if hydrochloric acid were to be added. When hydrogen ions are on the right side of the equilibrium, it will shift to the left to make up for this, increasing the concentration of reactants.

When HCl is added to the system, what will happen to the chemical equilibrium There will be a leftward change in the chemical equilibrium.

To know more about solubility  visit:-

https://brainly.com/question/28170449

#SPJ1

Magnetite has a higher iron content than hematite, with a percentage of approximately 70% iron content per kilogram, compared to hematite which has approximately 50% iron content per kilogram.

Therefore, Magnetite provides the greater percent of iron per kilogram.

Hematite (Fe2O3) and Magnetite (Fe3O4) are two important ores of iron.

The greater iron content of Magnetite is due to its higher iron to oxygen ratio compared to hematite.

Specifically, the formula of Magnetite is Fe3O4, with three iron (Fe) atoms and four oxygen (O) atoms, while the formula of Hematite is Fe2O3, with two iron (Fe) atoms and three oxygen (O) atoms.

This difference in the ratio of iron to oxygen gives Magnetite a higher iron content.

The higher iron content of Magnetite makes it more desirable for use in various applications, such as in steel production.

Steel production requires a high amount of iron and therefore Magnetite is the more attractive option. Additionally, the high iron content also makes Magnetite more valuable than Hematite as it can be sold for a higher price.

Magnetite has a higher iron content than Hematite and thus provides the greater percent of iron per kilogram.

This makes Magnetite the preferred choice for various applications, including steel production and sale.

 to know more about Magnetite refer here:

https://brainly.com/question/29724230#

#SPJ11

Answer: The defense mechanism in which self-justifying explanations replace the real, unconscious reasons for actions is Rationalization.

Rationalization is a type of defense mechanism where individuals create a logical explanation for their own behavior, even if the behavior is actually driven by emotions or unconscious thoughts.

This type of defense is used to protect the ego from the anxiety of a certain situation, usually one that is perceived to be too uncomfortable or overwhelming.

By rationalizing a behavior, the individual is able to tell themselves that they did the right thing, even if the choice was not made consciously or with the best intentions. Rationalization is a way to protect one’s ego by creating a logical justification for an action.

Learn more about rational behavior here:

https://brainly.com/question/24229313#

#SPJ11

Answer:

[-]observed experimental results

[-]theoretical calculations

Explanation:

The kinetic energy change of a diffuser operating at a steady state is 10 kJ/kg.

The kinetic energy change of the fluid is equal to the work done by the fluid on the surroundings, as it is assumed that there are no changes in potential energy in a steady-state diffuser. Thus, the work done by the fluid on the surroundings is equal to the kinetic energy change.

It can be assumed that the diffuser is an adiabatic system, meaning there is no heat transfer to or from the system. This means that the change in enthalpy is equal to the change in the internal energy of the system. Since the diffuser is operating at a steady state, the change in kinetic energy is zero.

Learn more about enthalpy:

https://brainly.com/question/30431725

#SPJ11

A container with a volume of 23.5L can hold approximately 5.122 x 10^23 molecules of CCI4.

What are molecule?

A molecule is a group of two or more atoms that are chemically bonded together. These atoms can be of the same element, such as two oxygen atoms bonded together to form an oxygen molecule (O2), or they can be different elements, such as a water molecule (H2O) which contains two hydrogen atoms and one oxygen atom. Molecules are the building blocks of many materials and substances, including gases, liquids, and solids. They can have different properties, such as size, shape, and chemical reactivity, depending on the specific arrangement and types of atoms they contain. Molecules play a fundamental role in many scientific fields, including chemistry, biology, and physics, and are studied extensively to understand the properties and behavior of matter at the molecular level.

To answer this question, we need to know the density of CCI4, which is a measure of how much mass is present in a given volume of the substance. The density of CCI4 is 1.594 g/mL.

We can use the following conversion factor to convert the density to a number of molecules per liter:

1.594 g/mL x (1 mole CCI4 / 153.82 g) x (6.022 x 10^23 molecules / 1 mole) = 2.176 x 10^22 molecules/L

This tells us that there are 2.176 x 10^22 molecules of CCI4 per liter of volume.

To find the number of molecules that can be held in a container with a volume of 23.5L, we simply need to multiply the number of molecules per liter by the total volume of the container:

2.176 x 10^22 molecules/L x 23.5 L = 5.122 x 10^23 molecules

Therefore, a container with a volume of 23.5L can hold approximately 5.122 x 10^23 molecules of CCI4.

To know more about chemical compound visit :-

https://brainly.com/question/26487468

#SPJ1

Answer: Not possible

Explanation:

It's not possible to determine how many moles of H2O2 you would end up with based on the information given.

The reason for this is that we don't know what is happening to the N2OOH in this scenario. Depending on the conditions and reaction occurring, the N2OOH could potentially break down into one or more different compounds, or it could react with another substance to form a new compound. Without this information, we cannot determine the amount of H2O2 that would result.

Explanation:

The chemical equation for the decomposition of N2OOH (dinitrogen trioxide) is:

N2OOH → 2 H2O2

This equation shows that one mole of N2OOH decomposes to produce two moles of H2O2.

If you start with 50 moles of N2OOH, you can calculate the number of moles of H2O2 produced by multiplying the number of moles of N2OOH by the stoichiometric coefficient of H2O2 in the balanced equation.

So,

Number of moles of H2O2 = 2 x 50 moles of N2OOH

= 100 moles of H2O2

Therefore, starting with 50 moles of N2OOH will produce 100 moles of H2O2 after complete decomposition

Oxygen can be liquefied at a temperature of -182.96°C (-297.33°F) at standard atmospheric pressure (1 atm or 101.3 kPa).

This is the boiling point of oxygen, which is the temperature at which oxygen changes from a gas to a liquid at constant pressure. To liquefy oxygen, it must be cooled to a temperature below its boiling point while maintaining a pressure of at least 1 atm. At lower pressures, the boiling point of oxygen decreases, so it can be liquefied at lower temperatures. Ammonia has a critical temperature of 405.5 K, which is greater than the ambient temperature. Since oxygen's critical temperature is lower than that of air, it cannot liquefy at room temperature.

Learn more about liquefied ,

https://brainly.com/question/6695948

#SPJ4

In this experiment, if the carboxylic acid is benzoic acid, there would be 1 mole of benzoic acid present, and 1 ml of saturated aqueous sodium bicarbonate would contain 1 mole of sodium bicarbonate.

The amount of sodium bicarbonate is therefore sufficient to react with all the benzoic acid. The reaction between benzoic acid and sodium bicarbonate produces a salt, benzoate, and water.

In this experiment, if the carboxylic acid is benzoic acid, there would be 1 mole of benzoic acid present. Since the reaction involves an equal amount of each component, there would also be 1 mole of sodium bicarbonate.

1 ml of saturated aqueous sodium bicarbonate would contain 1 mole of sodium bicarbonate. Therefore, the amount of sodium bicarbonate is sufficient to react with all the benzoic acid.

Carboxylic acids, such as benzoic acid, are compounds with a carboxyl group attached to an alkyl or aryl group. Benzoic acid is an example of a carboxylic acid and is composed of C7H6O2.

Sodium bicarbonate is a salt composed of sodium and bicarbonate ions (NaHCO3).

In an acid-base reaction between a carboxylic acid and a bicarbonate salt, the carboxylic acid donates a proton to the bicarbonate ion, forming a water molecule and a carbonate ion.

The reaction between benzoic acid and sodium bicarbonate is: C7H6O2 + NaHCO3 → C7H5O3- + H2O + Na+.

When 1 mole of benzoic acid reacts with 1 mole of sodium bicarbonate, all of the benzoic acid is consumed and the sodium bicarbonate is also completely consumed.

The reaction results in the formation of a salt, benzoate, and water.

The reaction between an acid and a bicarbonate salt is a type of neutralization reaction, since the proton from the acid is neutralized by the bicarbonate ion.

To know more about carboxylic acid refer here:

https://brainly.com/question/29035899#

#SPJ11

The molarity of the NH3 solution is 0.0576 M.

We can use the following steps to calculate the molarity of the NH3 solution:

Determine the mass of 1 mL of the NH3 solution using the given density:

mass of 1 mL of NH3 solution = density x volume of 1 mL

mass of 1 mL of NH3 solution = 0.982 g/mL x 1 mL = 0.982 g

Determine the number of moles of NH3 in 1 mL of the solution using the molar mass of NH3 (17.03 g/mol):

moles of NH3 in 1 mL of solution = mass of NH3 / molar mass of NH3

moles of NH3 in 1 mL of solution = 0.982 g / 17.03 g/mol = 0.0576 mol

Calculate the molarity of the NH3 solution using the number of moles of NH3 in 1 liter of the solution (1000 mL):

molarity of NH3 solution = moles of NH3 / volume of solution in liters

molarity of NH3 solution = 0.0576 mol / 1 L = 0.0576 M

Learn more about molarity at:

https://brainly.com/question/14469428

#SPJ1

The molecular equation for the gas evolution reaction between aqueous hydrobromic acid (HBr) and aqueous lithium sulfite (Li2SO3) is as follows:  2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} So_{3}[/tex] (aq)

In this reaction, hydrobromic acid (HBr) reacts with lithium sulfite ([tex]Li_{2} So_{3}[/tex]) to form lithium bromide (LiBr) and sulfurous acid ([tex]H_{2} So_{3}[/tex]). The sulfurous acid is unstable and decomposes into water( [tex]H_{2o[/tex]) and sulfur dioxide gas ([tex]So_{2}[/tex]):

[tex]H_{2} So_{3}[/tex] (aq) → [tex]H_{2} 0[/tex]l) + [tex]So_{2}[/tex] (g)

The overall reaction is:

2 HBr (aq) + [tex]Li_{2} So_{3}[/tex] (aq) → 2 LiBr (aq) + [tex]H_{2} o[/tex] (l) + [tex]So_{2}[/tex] (g)

In this gas evolution reaction, the mixing of the two aqueous solutions results in the formation of a new compound, lithium bromide, which remains dissolved in the solution. The other product, sulfurous acid, decomposes into water and sulfur dioxide gas, which is released as bubbles in the solution. This release of gas is the characteristic feature of gas evolution reactions.

Know more about sulfurous acid      here:

https://brainly.com/question/1084323

#SPJ11

Option (A) is correct. The phase of the water if the water in a tank is at the pressure of 5.5 mph and temperature of 260oc. the saturation pressure at the same temperature is 4.69 mph is compressed liquid.

A compressed liquid is defined as a fluid under mechanical or thermodynamic conditions that force it to be a liquid. A fluid is a compressed fluid if it is at a temperature lower than the saturation temperature at a given pressure. For example, water in a tank is at the pressure of 5.5 atmospheric pressure and temperature of 260oc. Compressed fluid is a substance that it is not about to vaporize. In the water tank fluid is not about to vaporize. At 1 atm. and 20°C, water exists in the liquid phase and is called compressed liquid. And if water is at 1 atm. pressure and 100°C, water exists as a liquid that is ready to vaporize and called as saturated liquid.

To learn more about compressed liquid

https://brainly.com/question/30890403

#SPJ4

The complete question is,

water in a tank is at the pressure of 5.5 mph. and temperature of 260oc. the saturation pressure at the same temperature is 4.69 mph. what is the phase of water? multiple choice question.

A. compressed liquid

B. superheated vapor

C. saturated mixture

D. saturated vapor

E. saturated liquid