The pressure range of 100 to 125 Mpa is the most suitable to operate in to achieve the desired extent of disruption.
Candida utilis yeast cells breakage is important for the manufacture of animal feeds, enzymes, nucleotides, and human food. For the operating pressure range of 50 Mpa < P < 125 Mpa, the constants in Equation (3.3.2) are
k=5.91×[tex]10^-4[/tex]Mpa-a and a=1.77. A desired extent of disruption ≥ 0.9. When the pressure is 50 Mpa, the number of passes is high, and when the pressure is 125 Mpa, the number of passes is low.
You can probably want to operate in the pressure range of 100 to 125 Mpa to get an adequate extent of disruption.
: The pressure range of 100 to 125 Mpa is the most suitable to operate in to achieve the desired extent of disruption.
To know more about nucleotides visit":
brainly.com/question/16308848
#SPJ11
The indicated function y₁(x) is a solution of the given differential equation. Use reduction of order or formula (5) in Section 4.2, e-JP(x) dx 1/2 = 1₂(X)/= y} (x) Y2 = DETAILS ZILLDIFFEQMODAP11M 4.2.013. as instructed, to find a second solution y₂(x). x²y" - xy + 5y = 0;
Since the discriminant is negative, the roots are complex. n = (1 ± √(-19))/2
To find a second solution y₂(x) of the given differential equation using the reduction of order method, we can use the formula (5) from Section 4.2.
The given equation is: x²y" - xy + 5y = 0
Let's assume y₁(x) = xⁿ as the first solution. Then, we can find the derivative of y₁(x) as follows:
y₁'(x) = nxⁿ⁻¹
y₁''(x) = n(n-1)xⁿ⁻²
Substituting these derivatives into the differential equation, we have:
x²(n(n-1)xⁿ⁻²) - x(xⁿ) + 5(xⁿ) = 0
Simplifying this equation:
n(n-1)xⁿ + 5xⁿ = 0
Factoring out xⁿ:
xⁿ(n(n-1) + 5) = 0
For this equation to hold true for all x, we must have:
n(n-1) + 5 = 0
Solving this quadratic equation, we find:
n² - n + 5 = 0
Using the quadratic formula, we get:
n = (1 ± √(-19))/2
Since the discriminant is negative, the roots are complex.
Therefore, there are no real values of n that satisfy the equation. As a result, we cannot find a second solution using the reduction of order method for this particular differential equation.
To learn more about differential equation click here
brainly.com/question/1164377
#SPJ11
Determine the spontaneity of this reaction:
4HN3(g) + 3O2(g) --> 2N2(g) + 6H2O(g) Delta Hrxn= -1267 kJ
A. The reaction is spontaneous at high temperatures
B. The reaction is NOT spontaneous at any temperatures
C. The reaction is spontaneous at low temperatures
D. The reaction is spontaneous at all temperatures
E. It is impossible to determine the reaction spontaneity without additional information
We cannot definitively conclude the spontaneity of the reaction. The correct answer is E: It is impossible to determine the reaction spontaneity without additional information.
The spontaneity of a reaction can be determined by considering the sign of the change in enthalpy (ΔHrxn) and the change in entropy (ΔSrxn). In this case, the given reaction has a negative ΔHrxn (-1267 kJ), indicating that it is exothermic and releases energy.
To determine the spontaneity, we need to consider the relationship between ΔHrxn and ΔSrxn using the Gibbs free energy equation: ΔGrxn = ΔHrxn - TΔSrxn
where ΔGrxn is the change in Gibbs free energy, T is the temperature in Kelvin, and ΔSrxn is the change in entropy.
Since the question does not provide any information about the change in entropy, we cannot directly calculate ΔGrxn. However, we can use the sign of ΔHrxn to make an inference.
If a reaction has a negative ΔHrxn and ΔSrxn is positive, the reaction will be spontaneous at all temperatures because the negative term (-TΔSrxn) will eventually overcome the negative ΔHrxn term, resulting in a negative ΔGrxn. This means that the reaction is thermodynamically favorable.
On the other hand, if ΔHrxn is negative and ΔSrxn is negative, the reaction will only be spontaneous at low temperatures, as the negative term (-TΔSrxn) will become more dominant at higher temperatures, making the reaction non-spontaneous.
Since we do not have information about ΔSrxn, we cannot determine its sign. Therefore, we cannot definitively conclude the spontaneity of the reaction. The correct answer is E: It is impossible to determine the reaction spontaneity without additional information.
Learn more about spontaneity:
https://brainly.com/question/30127476
#SPJ11
Select the only correct statement from the list below Select one: a. On de-excitation in Atomic Emission Spectrometry, all metals emit radiation in the visible region of the electromagnetic spectrum
b. None of the statements listed here is correct c. Living things need metallic macronutrients such as Cobalt-containing compounds in their diet for proper growth and development d. The Flame Test for qualitative analysis is based on the principles of Atomic Absorption
The correct statement among the given options is "The Flame Test for qualitative analysis is based on the principles of Atomic Absorption."
The Flame Test is a method used for qualitative analysis of elements. It involves heating a metallic salt mixed with a hydrochloric acid and methanol solution in a flame. The resulting color of light emitted during this process is characteristic and can be used to identify the presence of specific elements.
This test is based on the principles of Atomic Absorption. In Atomic Absorption Spectroscopy, the elements are vaporized in a flame or graphite furnace and then excited by absorbing light at a specific wavelength. The atoms in the vapor absorb the energy of the incident light, leading to their excitation. Upon returning to the ground state, they emit light at specific wavelengths, which can be detected and analyzed.
On the other hand, Atomic Emission Spectrometry involves the emission of light of various wavelengths during the de-excitation process. It is important to note that not all metals emit radiation in the visible region of the electromagnetic spectrum.
Regarding the incorrect options, option (a) is incorrect because Atomic Emission Spectrometry does not involve absorption of light by the atoms. Option (c) is incorrect because cobalt is not considered an essential element for living organisms and is not classified as a metallic macronutrient. Option (b) is also incorrect as it contradicts the fact that one of the given statements is correct, which is the statement about the Flame Test and Atomic Absorption.
Learn more about analysis
https://brainly.com/question/33490941
#SPJ11
Use the definition of the derivative to find the derivative of the function. Show your work by completing the four-step process. (Simplify your answers completely for each step.) f(x) = Step 1: Step 2: Step 3: Step 4: f'(x) = lim h→0 Step 1: Step 2: X + 9 Step 3: Step 4: [-/0.2 Points] Use the definition of the derivative to find the derivative of the function. Show your work by completing the four-step process. (Simplify your answers completely for each step.) f(x)=√x + 8 f(x + h) = f(x +h)-f(x) = f(x +h)-f(x) h DETAILS f'(x) = lim h→0 f(x +h)-f(x) = h f(x + h) = f(x +h)-f(x) = f(x+h)-f(x) h (Express your answer as a single fraction.) f(x+h)-f(x) h (Rationalize the numerator.)
The derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
To find the derivative of the given function using the definition of the derivative, we follow the four-step process:
Step 1: Set up the difference quotient:
f'(x) = lim h→0 [f(x + h) - f(x)] / h
Step 2: Substitute the function into the expression:
f'(x) = lim h→0 [√(x + h) + 8 - (√x + 8)] / h
Step 3: Simplify the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h
Step 4: Rationalize the numerator by multiplying the numerator and denominator by the conjugate of the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h * [√(x + h) + √x] / [√(x + h) + √x]
Simplifying further:
f'(x) = lim h→0 [(x + h) - x] / [h(√(x + h) + √x)]
f'(x) = lim h→0 h / [h(√(x + h) + √x)]
f'(x) = lim h→0 1 / (√(x + h) + √x)
Taking the limit as h approaches 0, we find:
f'(x) = 1 / (√x + √x) = 1 / (2√x)
Therefore, the derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
Learn more about derivative: brainly.com/question/23819325
#SPJ11
The derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
To find the derivative of the given function using the definition of the derivative, we follow the four-step process:
Step 1: Set up the difference quotient:
f'(x) = lim h→0 [f(x + h) - f(x)] / h
Step 2: Substitute the function into the expression:
f'(x) = lim h→0 [√(x + h) + 8 - (√x + 8)] / h
Step 3: Simplify the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h
Step 4: Rationalize the numerator by multiplying the numerator and denominator by the conjugate of the numerator:
f'(x) = lim h→0 [√(x + h) - √x] / h * [√(x + h) + √x] / [√(x + h) + √x]
Simplifying further:
f'(x) = lim h→0 [(x + h) - x] / [h(√(x + h) + √x)]
f'(x) = lim h→0 h / [h(√(x + h) + √x)]
f'(x) = lim h→0 1 / (√(x + h) + √x)
Taking the limit as h approaches 0, we find:
f'(x) = 1 / (√x + √x) = 1 / (2√x)
Therefore, the derivative of the function f(x) = √x + 8 is f'(x) = 1 / (2√x).
Learn more about derivative: brainly.com/question/23819325
#SPJ11
A structure has 31 ft of soil on the left side with the water table at the ground surface. On the right side there is 10 ft of water above soil. The height of the structure is the same on the left and the right. The unit weight of soils is 133 pcf. Neglecting resistance along the bottom of the structure, what is the factor of safety against sliding assuming full passive resistance? Assume that movement of the structure is from left to right. The soil friction angel is 30 degrees.
The factor of safety against sliding, assuming full passive resistance, is 2.8.
To calculate the factor of safety against sliding, we need to determine the resisting force and the driving force acting on the structure. The resisting force is provided by the passive resistance of the soil, which depends on the soil friction angle and the vertical effective stress. The driving force is given by the weight of the water and the soil on the right side of the structure.
First, let's calculate the resisting force. The vertical effective stress at the bottom of the structure on the left side is the unit weight of soil multiplied by the height of soil. Therefore, the resisting force is given by the passive resistance coefficient times the vertical effective stress times the area of the base of the structure.
On the right side, the driving force is equal to the weight of the water plus the weight of the soil above the water. The weight of the water is the unit weight of water multiplied by the height of water. The weight of the soil is the unit weight of soil multiplied by the height of soil.
Finally, the factor of safety against sliding is calculated by dividing the resisting force by the driving force.
Learn more about factor of safety
brainly.com/question/13385350
#SPJ11
Select the statements that are TRUE: Select 3 chrtwet anvwer(s) This is an increasing function. Thouborimotal gevenntotonical - 1 Select 3 correct answer(s) This is an increasing function. The horizontal asymptote is y=1. The vertical asymptote is x=3. D={x∣x∈R} R={y∣y∈R}
The given function is: `f(x) = (x-3)/(x²-4x+3)`The given function is an increasing function, has a horizontal asymptote of `y = 1` and a vertical asymptote of `x = 3`.The true statements about the given function are as follows: This is an increasing function
The given function can be written as:
`f(x) = (x-3)/((x-1)(x-3))`
When we simplify the expression, we get `f(x) = 1/(x-1)`Since `f(x) = 1/(x-1)` is a decreasing function, therefore:
`f(x) = (x-3)/(x²-4x+3)` will be an
increasing function. This is because the reciprocal of a decreasing function is an increasing function. The horizontal asymptote is y=1 When x becomes very large positive and negative, then `(x-3)` will be the dominant term in the numerator and `x²` will be the dominant term in the denominator. Therefore, `f(x)` will be equivalent to `(x-3)/x²` and will approach zero as x tends to infinity. Also, when `x` is slightly greater or less than 3, `f(x)` is extremely large and negative. Therefore, the function has a horizontal asymptote at `y = 1`.The vertical asymptote is x=3The given function is undefined for `x=1` and `x=3`. Therefore, there are vertical asymptotes at `x=1` and `x=3`.
Thus, the three true statements about the given function `f(x) = (x-3)/(x²-4x+3)` are:This is an increasing function.The horizontal asymptote is y=1.The vertical asymptote is x=3.
To learn more about increasing function visit:
brainly.com/question/14330051
#SPJ11
Leaming Goal: To use the principle of work and energy to defermine charactertistics of a system of particles, including final velocities and positions. The two blocks shown have masses of mA=42 kg and mg=80 kg. The coefficent of kinetic friction between block A and the incined plane is. μk=0.11. The angle of the inclined plane is given by θ=45∘ Negiect the weight of the rope and pulley (Figure 1) Botermine the magnitude of the nomal force acting on block A. NA Express your answer to two significant figures in newtons View Avaliabie Hinto - Part B - Detemining the velocity of the blocks at a given position Part B - Determining the velocity of the blocks at a given position If both blocks are released from rest, determine the velocily of biock 8 when it has moved itroigh a distince of 3=200 mi Express your answer to two significant figures and include the appropriate units: Part C - Dctermining the position of the biocks at a given velocity Part C - Detertminang the position of the blocks at a given velocily Express your answer fo two significist figures and inciude the kpproghtate units
The velocity of block B is 10.92 m/s when it has moved through a distance of 3 m.
Taking the square root of the velocity, we obtain
[tex]v=−10.92m/sv=−10.92m/s[/tex]
Since the negative value of velocity indicates that block B is moving downwards.
Thus,
The principle of work and energy to determine characteristics of a system of particles, including final velocities and positions can be used as follows:
The two blocks shown have mA=42 kg and mg=80 kg. The coefficient of kinetic friction between block A and the inclined plane is μk=0.11. The angle of the inclined plane is given by θ=45∘Neglect the weight of the rope and pulley (Figure 1). The magnitude of the normal force acting on block A is to be determined. NAThe free body diagram of the two blocks is shown below.
The weight of block A is given by [tex]mAg=mAg=42×9.81≈412.62N.[/tex]
Using the kinematic equation of motion,[tex]v2=2as+v02=2(−2.235)(26.7)+0=−119.14v2=2as+v02=2(−2.235)(26.7)+0=−119.14[/tex]
To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ11
A rhombus has side lengths of 30 inches and the longest diagonal is 45 inches. Determine the measure of the larger congruent angles. Round to the nearest tenth of a degree.
The measure of the larger congruent angles in the rhombus is approximately 134.3 degrees.
In a rhombus, all four sides are equal in length, and the diagonals bisect each other at right angles. To determine the measure of the larger congruent angles, we can use the properties of a rhombus and apply the trigonometric concept of the Law of Cosines.
Let's denote the measure of the larger congruent angle as θ. In a rhombus, the diagonals are perpendicular bisectors of each other, forming four congruent right triangles. The sides of each right triangle are half the length of the diagonals.
Using the Law of Cosines, we can relate the side lengths and diagonal lengths:
[tex]c^{2} = a^{2} + b^{2} - 2ab * cos(θ)[/tex]
Given that the side length (a) is 30 inches and the longest diagonal (c) is 45 inches, we can substitute these values into the equation:
[tex]45^{2} = 30^{2} + 30^{2} - 2(30)(30) * cos(θ)[/tex]
2025 = 900 + 900 - 1800 * cos(θ)
225 = -1800 * cos(θ)
cos(θ) = -225/1800
θ = [tex]cos^{(-1)(-225/1800)}[/tex]
Using a calculator, we find θ ≈ 134.3 degrees (rounded to the nearest tenth of a degree).
Know more about Law of cosines here:
https://brainly.com/question/30766161
#SPJ8
Question 5 A hydrate of nickel(II) chloride (NiCl2-XH₂O) decomposes to produce 29.5% water & 70.5% AC. Calculate the water of crystallization for this hydrated compound. (The molar mass of anhydrous NiCl2 is 129.6 g/mol.) Type your work for partial credit. Answer choices: 3, 4, 7, or 8.
The water of crystallization for this hydrate is 3.
To calculate the water of crystallization for the hydrate of nickel(II) chloride (NiCl2-XH₂O), we need to analyze the given information.
The compound is described as a hydrate, which means it contains water molecules in its crystal structure. It decomposes to produce 29.5% water and 70.5% anhydrous compound (AC).
To find the water of crystallization, we need to determine the number of water molecules (X) in the formula NiCl2-XH₂O.
First, let's find the molar mass of the anhydrous compound, NiCl2. The molar mass of anhydrous NiCl2 is given as 129.6 g/mol.
Next, let's assume we have 100 grams of the compound. Since 29.5% of the compound is water, the mass of water present is 29.5 grams.
Now, we can find the mass of the anhydrous compound by subtracting the mass of water from the total mass of the compound:
100 g - 29.5 g = 70.5 g
Next, let's convert the mass of the anhydrous compound to moles. We can use the molar mass of NiCl2 to do this:
70.5 g / 129.6 g/mol = 0.544 moles of NiCl2
Now, let's calculate the moles of water by using the molar mass of water (18.015 g/mol):
29.5 g / 18.015 g/mol = 1.636 moles of water
To find the ratio of water to anhydrous compound, we divide the moles of water by the moles of NiCl2:
1.636 moles water / 0.544 moles NiCl2 = 3 moles water : 1 mole NiCl2
From the ratio, we can see that the formula of the hydrated compound is NiCl2-3H₂O. This means that the water of crystallization for this hydrate is 3.
Therefore, the correct answer is 3.
Learn more about hydrated compound:
https://brainly.com/question/16275027
#SPJ11
Problem 4: (18 Points) You are on a team developing a new satellite. It has four main components: 1) a power system, 2) altitude control, 3) antenna, and 4) data collection sensor. The manufacturing costs of the first satellite is expected to cost $3.6 million dollars, and each subsequent satellite is expected to decrease in manufacturing costs by 2% for the first 12 units. You assume manufacturing costs are applied at the completion of the satellite (aka end of the month). Your team will manufacture 1 unit a month for the first year. At the end of 6 months and at the end of the year your team will launch all of the completed satellites into orbit (6 units per launch). This will cost $1.2 million per launch. The satellites are expected to be in orbit for 10 years and have a salvage value of $12,000 each at the end of their 10-year orbit. a. Draw the cash flow diagram. (You may abbreviate your diagram between the end of year 1 and year 10). b. Use an effective monthly interest rate of 1.8% to evaluate the total present value cost to make, launch, and sell the satellites. c. Congratulations you applied for a grant from the Florida Space Consortium, and you have received $3.5 million dollars. You will need to apply for a business loan for the rest based on the total present value cost of the project found in part b, which you intend to pay off monthly during the 10-year orbit. You will take out the loan with an interest rate of 8% compounded monthly at the beginning of the project. What is monthly loan payment you will need to make during the 10-year orbit?
Total present value cost to make, launch, and sell the satellites at an effective monthly interest rate of 1.8% i.e. rate.
For the second satellite, manufacturing cost = $3.6 million x 0.98 = $3.528 million For the third satellite, manufacturing cost = $3.528 million x 0.98 = $3.456384 million.
For the sixth satellite, manufacturing cost = $3.3149924312 million x 0.98 = $3.246193582576 million.
For the next six months, manufacturing costs decrease by 2% for the first 12 units, so the manufacturing cost of the seventh satellite= $3.246193582576.
The total manufacturing cost for six satellites = $18.73153960704 million Launch cost for 6 units = $1.2 million So, total cost at the end of the year = $19.93153960704 million.
Now, the satellites are expected to be in orbit for 10 years and have a salvage value of $12,000 each at the end of their 10-year orbit. Salvage value for 72 satellites = $864,000
To know more about manufacturing visit:
https://brainly.com/question/29489393
#SPJ11
Jackson deposits 1150 at the end of each month in a savings account earning interest at a rate of 9%/year compounded monthly, how much will he have on deposit in his savings account at the end of years, assuming he makes no withdrawals during that period? (Round your answer to the nearest cent
Jackson will have approximately $2748.17 on deposit in his savings account at the end of 150 months.
To calculate the amount that Jackson will have on deposit in his savings account at the end of 150 months, we can use the formula for compound interest:
[tex]A = P(1 + r/n)^(nt)[/tex]
Where:
A = the amount on deposit at the end of the time period
P = the principal amount (the initial deposit)
r = the annual interest rate (as a decimal)
n = the number of times the interest is compounded per year
t = the number of years
In this case, Jackson deposits $1150 at the end of each month, so the principal amount (P) is $1150. The annual interest rate (r) is 9% or 0.09 as a decimal.
The interest is compounded monthly, so the number of times compounded per year (n) is 12.
And the time period (t) is 150 months divided by 12 to convert it to years.
Plugging these values into the formula:
[tex]A = 1150(1 + 0.09/12)^(12*(150/12))[/tex]
Simplifying:
[tex]A = 1150(1 + 0.0075)^(12*12.5)[/tex]
[tex]A = 1150(1.0075)^(150)[/tex]
Using a calculator, we can find that [tex](1.0075)^(150)[/tex] is approximately 2.3861.
A ≈ 1150 * 2.3861
A ≈ 2748.165
Rounding the answer to the nearest cent, Jackson will have approximately $2748.17 on deposit in his savings account at the end of 150 months.
Learn more about savings account from this link:
https://brainly.com/question/30101466
#SPJ11
In impact of jet experiment, jet of water (1000kg/m°) 5cm in diameter strikes normal to a 90 degrees target. If the velocity of the impact is 6 m/s, what mass (kg) is required on the weighing platform to bring the pointer back to its original position?
To bring the pointer back to its original position, a mass of approximately 11.781 kg is required on the weighing platform.
To determine the mass required on the weighing platform to bring the pointer back to its original position in the impact of jet experiment, we need to consider the principle of conservation of momentum.
The momentum of the water jet before impact is equal to the momentum of the water and the platform after impact.
Given:
Density of water (ρ) = 1000 kg/m³
Diameter of the water jet (d) = 5 cm
= 0.05 m
Velocity of the impact (V) = 6 m/s
Step 1: Calculate the cross-sectional area of the water jet:
Area (A) = π × (d/2)²
A = π × (0.05/2)²
A ≈ 0.0019635 m²
Step 2: Calculate the initial momentum of the water jet:
Momentum (P) = Mass (m) × Velocity (V)
The mass of the water jet can be calculated as:
m = ρ × A × V
m = 1000 kg/m³ × 0.0019635 m² × 6 m/s
m ≈ 11.781 kg
Therefore, to bring the pointer back to its original position, a mass of approximately 11.781 kg is required on the weighing platform.
To know more about mass visit
https://brainly.com/question/20579920
#SPJ11
A particle travels across a at surface, moving due east for 3 m, then due north for 9 m, and then returns to the origin. A force field acts on the particle, given by F(x,y)=sin(x^2+y^2)i+ln(2+xy)j Find the work done on the particle by F.
The work done on the particle by the force field F is zero
To find the work done on the particle by the force field F, we can use the line integral of the force along the path traveled by the particle.
The work done can be calculated using the formula:
W = ∫ F · dr
where W represents the work done, F is the force field, and dr represents the differential displacement vector along the path.
Let's break down the path traveled by the particle into three segments:
1. The particle moves due east for 3 m, so the displacement vector for this segment is dr1 = 3i.
2. The particle then moves due north for 9 m, so the displacement vector for this segment is dr2 = 9j.
3. Finally, the particle returns to the origin, so the displacement vector for this segment is dr3 = -3i - 9j.
Now, let's calculate the work done on each segment separately and then add them up to find the total work done:
1. For the first segment:
W1 = ∫ F · dr1
= ∫ (sin(x^2 + y^2)i + ln(2 + xy)j) · 3i
= ∫ 3sin(x^2 + y^2) dx
= 3∫ sin(x^2 + y^2) dx
= 3g(x,y) + C1
Here, g(x,y) represents the antiderivative of sin(x^2 + y^2) with respect to x, and C1 is the constant of integration.
2. For the second segment:
W2 = ∫ F · dr2
= ∫ (sin(x^2 + y^2)i + ln(2 + xy)j) · 9j
= ∫ 9ln(2 + xy) dy
= 9h(x,y) + C2
Similarly, h(x,y) represents the antiderivative of ln(2 + xy) with respect to y, and C2 is the constant of integration.
3. For the third segment:
W3 = ∫ F · dr3
= ∫ (sin(x^2 + y^2)i + ln(2 + xy)j) · (-3i - 9j)
= ∫ (-3sin(x^2 + y^2) - 9ln(2 + xy)) dx
= -3∫ sin(x^2 + y^2) dx - 9∫ ln(2 + xy) dy
= -3g(x,y) - 9h(x,y) + C3
Here, C3 is the constant of integration.
Finally, we can find the total work done by adding the individual work done on each segment:
W = W1 + W2 + W3
= 3g(x,y) + C1 + 9h(x,y) + C2 - 3g(x,y) - 9h(x,y) + C3
= 3g(x,y) - 3g(x,y) + 9h(x,y) - 9h(x,y) + C1 + C2 + C3
= C1 + C2 + C3
Since the particle returns to the origin, the displacement is zero, which means the total work done is zero as well. Thus, the work done on the particle by the force field F is zero.
Please note that this is a simplified explanation of the process. In reality, you would need to evaluate the integrals and apply the Fundamental Theorem of Calculus to find the specific values of C1, C2, and C3.
Learn more about work done from the given link
https://brainly.com/question/25573309
#SPJ11
A truck move across a 25 - m simple span. The wheel loads are P. = 36 kN and P2 = 142 kN separated by 4.3 m, and P2 = 142 kN at 7.6 m from P. Determine (a) the maximum shear in kN, (b) the maximum moment under each load in kN.m, (c) the maximum moment of the group of moving loads in kN.m.
The maximum shear is -142 kN (upwards). The maximum moment under load P1 is 900 kN.m, and the maximum moment under load P2 is 2471.8 kN.m. The maximum moment of the group of moving loads is 3371.8 kN.m.
To determine the maximum shear, maximum moment under each load, and the maximum moment of the group of moving loads, we can use the principles of statics and structural analysis.
Given:
P1 = 36 kN (load 1)
P2 = 142 kN (load 2)
Distance between P1 and P2 = 4.3 m
Distance between P2 and support = 7.6 m
(a) Maximum Shear:
The maximum shear occurs when the truck is positioned to create the largest shear force on the span. Since the loads are concentrated at specific points, the maximum shear will occur directly below each load.
Shear at P1 = -P1 = -36 kN (upwards)
Shear at P2 = -P2 = -142 kN (upwards)
Therefore, the maximum shear is -142 kN (upwards).
(b) Maximum Moment under Each Load:
The maximum moment occurs when the load is positioned to create the largest bending moment at the span's cross-section. The moment at each load can be calculated using the following formula:
Moment at P1 = P1 * a
Moment at P2 = P2 * b
Where:
a = distance from P1 to the support (25 m)
b = distance from P2 to the support (25 - 7.6 = 17.4 m)
Moment at P1 = 36 kN * 25 m = 900 kN.m
Moment at P2 = 142 kN * 17.4 m = 2471.8 kN.m
Therefore, the maximum moment under load P1 is 900 kN.m, and the maximum moment under load P2 is 2471.8 kN.m.
(c) Maximum Moment of the Group of Moving Loads:
To determine the maximum moment of the group of moving loads, we need to consider the combination of moments created by the loads.
Maximum Moment = Moment at P1 + Moment at P2
Maximum Moment = 900 kN.m + 2471.8 kN.m = 3371.8 kN.m
Therefore, the maximum moment of the group of moving loads is 3371.8 kN.m.
To know more about maximum shear visit :
https://brainly.com/question/32765327
#SPJ11
Arrange the following compounds from strongest acid to weakest acid based on the provided Ka values.
(Drag and drop into the appropriate area)
4.30 × 10–14
7.40 × 10–6
3.10 × 10–2
3.50 × 10–6
In order to arrange the given compounds based on their Ka values, we need to compare their acidic strengths. The higher the Ka value, the stronger the acid.
Let us arrange the given compounds from strongest acid to weakest acid based on the provided Ka values:
3.10 × 10–2 > 7.40 × 10–6 > 3.50 × 10–6 > 4.30 × 10–14
Now, let us discuss why the given compounds are arranged in this order: The Ka values for the given compounds are as follows:
Compound Ka Value Hydrochloric acid (HCl) 1.3 × 106 Hydrobromic acid (HBr) 8.6 × 109
Hydroiodic acid (HI) 1.0 × 1010
Perchloric acid (HClO4) > 1 × 1015
Sulfuric acid (H2SO4) 1.0 × 101–2
Hydronium ion (H3O+) 1.0
Water (H2O) 1.0 × 10–14
Acetic acid (CH3COOH) 1.8 × 10–5
Formic acid (HCOOH) 1.8 × 10–4
Ammonium ion (NH4+) 5.6 × 10–10
Methanol (CH3OH) 1.8 × 10–16.
We can see that the Ka value for hydrochloric acid is much higher than all the given compounds. So, we can conclude that hydrochloric acid is the strongest acid. The Ka value for hydrobromic acid is higher than all the given compounds except for hydroiodic acid and perchloric acid. However, we can arrange them in order as 3.10 × 10–2 > 7.40 × 10–6 > 3.50 × 10–6 based on their Ka values. The given compound 4.30 × 10–14 has a very low Ka value. So, we can conclude that it is the weakest acid among the given compounds.
To know more about values visit:
https://brainly.com/question/30145972
#SPJ11
The arrangement of the from strongest acid to weakest acid, based on the provided Ka values, is: 3.10 × 10–2, 7.40 × 10–6, 3.50 × 10–6, and 4.30 × 10–14.
To arrange the compounds from strongest acid to weakest acid based on the provided Ka values, we need to compare the values of Ka.
First, let's list the compounds in ascending order of their Ka values:
4.30 × 10–14
3.50 × 10–6
7.40 × 10–6
3.10 × 10–2
The Ka values represent the acid dissociation constant, which is a measure of the extent to which an acid donates protons in a solution. A larger Ka value indicates a stronger acid.
Comparing the Ka values, we can see that 3.10 × 10–2 has the highest value, followed by 7.40 × 10–6, 3.50 × 10–6, and finally 4.30 × 10–14 with the lowest value.
Therefore, the correct arrangement from strongest acid to weakest acid is:
3.10 × 10–2
7.40 × 10–6
3.50 × 10–6
4.30 × 10–14
Learn more about compounds
https://brainly.com/question/14117795
#SPJ11
The treatment for iron-deficiency anemia can require an adult female to take a daily supplement of ferrous gluconate, C₁2H₂FeO14, when her diet is not providing enough iron. What is the molar mass of ferrous gluconate (C₁₂H₂FeO)? molar mass of C₁2H₂2FeO₁4 = How many moles are in a supplement containing 37.0 mg C₁,H₂, FeO,? 37.0 mg C₁2H₂2FeO 14 = g/mol mol
The molar mass of ferrous gluconate (C₁₂H₂FeO) is approximately 295.91 g/mol. and there are approximately 0.000125 moles of C₁₂H₂FeO in a supplement containing 37.0 mg.
The molar mass of ferrous gluconate (C₁₂H₂FeO) can be calculated by adding up the atomic masses of each element in its chemical formula. The atomic masses of carbon (C), hydrogen (H), iron (Fe), and oxygen (O) are approximately 12.01 g/mol, 1.008 g/mol, 55.85 g/mol, and 16.00 g/mol, respectively.
To calculate the molar mass of ferrous gluconate, we multiply the number of atoms of each element in the formula by their respective atomic masses and then sum them up:
(12.01 g/mol × 12) + (1.008 g/mol × 22) + (55.85 g/mol × 1) + (16.00 g/mol × 7) = 295.91 g/mol
Therefore, the molar mass of ferrous gluconate (C₁₂H₂FeO) is approximately 295.91 g/mol.
Now, let's calculate the number of moles in a supplement containing 37.0 mg of C₁₂H₂FeO.
First, we need to convert the mass from milligrams to grams by dividing it by 1000:
37.0 mg ÷ 1000 = 0.037 g
Next, we use the molar mass of ferrous gluconate to calculate the number of moles:
0.037 g ÷ 295.91 g/mol = 0.000125 mol
Therefore, there are approximately 0.000125 moles of C₁₂H₂FeO in a supplement containing 37.0 mg.
You can learn more about molar mass at: brainly.com/question/12127540
#SPJ11
Design a circular sewage sedimentation tank for a town having population 40,000. The average water demand is 140 lped. Assume that 70% water reached at the treatment unit and the maximum demand is 2.7 times the average demand.
The circular sedimentation tank for the town should have a volume of approximately 490,000 liters to meet the settlement requirements.
To design a circular sewage sedimentation tank for a town with a population of 40,000 and an average water demand of 140 liters per capita per day (lped), we need to consider the water flow and sedimentation requirements.
First, let's calculate the total water demand for the town:
Total water demand = Population * Average water demand
Total water demand = 40,000 * 140 lped = 5,600,000 liters per day (lpd)
Given that 70% of the water reaches the treatment unit, we can calculate the inflow to the sedimentation tank:
Inflow to sedimentation tank = Total water demand * 70%
Inflow to sedimentation tank = 5,600,000 lpd * 70% = 3,920,000 lpd
Considering the maximum demand is 2.7 times the average demand, we can calculate the peak inflow to the sedimentation tank:
Peak inflow to sedimentation tank = Average water demand * Maximum demand factor
Peak inflow to sedimentation tank = 140 lped * 2.7 = 378 lped
To design the sedimentation tank, we need to ensure sufficient retention time for settling of solids. The detention time for the sedimentation tank can be calculated using the following formula:
Detention time = Volume of tank / Inflow to sedimentation tank
Let's assume a retention time of 3 hours (0.125 days) for sedimentation. Rearranging the formula, we can calculate the required volume of the tank:
Volume of tank = Inflow to sedimentation tank * Detention time
Volume of tank = 3,920,000 lpd * 0.125 days = 490,000 liters
Therefore, the circular sedimentation tank for the town should have a volume of approximately 490,000 liters to meet the settlement requirements.
Learn more about volume
https://brainly.com/question/14197390
#SPJ11
Please help i need before june 8th
Answer: x=1
Step-by-step explanation:
Perimeter = 2L + 2W
Perimeter = 2(4) + 2(4x)
Perimeter = 8+8x
Area = LW
Area = 4 (4x)
Area = 16x
Problem says values re equal
Perimeter = Area
8 + 8x = 16x
8 = 8x
x=1
Solve the equation g(x)=1 for x if g(x)=-0.3 x^{2}+3 x+6 . x= (Use a comma to separate solutions. Round to four decimal places.)
The solution to the equation g(x) = 1 for x is [tex]x = 11.4586, -1.4586[/tex] Given equation g(x) = -0.3 x² + 3x + 6. We need to solve the equation g(x) = 1 for x.
So, we get,
-0.3 [tex]x² + 3x + 6 = 1[/tex]
Adding -1 on both sides of the equation, we get,-0.[tex]3 x² + 3x + 5 = 0.[/tex] Multiplying the entire equation by -10, we get,
3x² - 30x - 50 = 0
Dividing the entire equation by 3, we get,
[tex]x² - 10x - 16.66667 = 0[/tex]
Now, we can solve this quadratic equation using the quadratic formula, which is given by,
[tex]x = (-b ± √(b² - 4ac)) / (2a).[/tex]
Here, a = 1, b = -10, and c = -16.66667.Substituting these values in the formula, we get,
x = [10 ± √(100 - 4×1×(-16.66667))] / (2×1)x
= [10 ± √(100 + 66.66668)] / 2x
= [10 ± √(166.66668)] / 2x
= [10 ± 12.91728] / 2x
= 11.45864, -1.45864
Rounded off to four decimal places, the solutions are 11.4586 and -1.4586.
To know more about sides visit:
https://brainly.com/question/31139338
#SPJ11
Suppose $8,000 is deposited into an account which earns continuously compounded interest. Under these conditions, the balance in the account grows at a rate proportional to the current balance. Suppose that after 5 years the account is worth $15,000. (a) How much is the account worth after 6 years?
(b) How many years does it take for the balance to $20,000 ?
The account balance after 6 years is approximately $14,085.
Given that $8,000 is deposited into an account which earns continuously compounded interest. Under these conditions, the balance in the account grows at a rate proportional to the current balance. After 5 years the account is worth $15,000.
Using the formula for continuously compounded interest: [tex]\[A=P{{e}^{rt}}\][/tex]
Where,
A = balance after t years
P = principal amount
= 8000r
= rate of interest
= kP
= 8000,
A = 15,000,
t = 5
Using these values, we can solve for k as:
[tex]\[A=P{{e}^{rt}}\] \[15000=8000{{e}^{5k}}\]\[{{e}^{5k}}=\frac{15}{8}\][/tex]
Taking natural logarithms of both sides, we get,
[tex]\[5k=\ln \frac{15}{8}\]\[k=\frac{1}{5}\ln \frac{15}{8}\][/tex]
The balance after 6 years is:
[tex]\[A=8000{{e}^{6k}}\] \[A=8000{{e}^{6\left( \frac{1}{5}\ln \frac{15}{8} \right)}}\]\[A=8000{{\left( \frac{15}{8} \right)}^{6/5}}\][/tex]
Approximately, [tex]\[A=14085\][/tex]
To know more about the account, visit:
https://brainly.com/question/17210497
#SPJ11
Question 20 Force of impact of jet a) Decreases with increase in diameter of the jet b) Increases with decrease in vertical distance between nozzle and target c) Decreases with increase in flow rate of jet d)Decreases with increase in velocity of impact
The statement that is true for the force of impact of jet is: d) Decreases with increase in velocity of impact.
Explanation:
The force of impact of a jet on a stationary flat plate will depend upon the density, velocity, and the area of the jet.
The magnitude of the force on the plate is found to be proportional to the mass per second, density, and the velocity head of the jet.
The force of impact of a jet decreases with the increase in velocity of impact.
Because, if the velocity of the fluid striking an object is increased, the force that results will be greater.
The force is increased because the momentum of the fluid striking the object is increased, which then increases the force on the object.
So, it is clear that the answer to the given question is option (d) Decreases with increase in velocity of impact.
To know more about force of impact visit:
https://brainly.com/question/12350159
#SPJ11
A 150 L tank contains 100 L of water. A solution with a salt concentration of 0.1 kg/L is added to the tank at a rate of 5 L/min. The solution is kept mixed and is drained from the tank at a rate of 3 L/min. Determine the concentration of the mixture at the time the tank fills to maximum capacity.
The volume of the mixture in the tank will increase at a rate of 2 L/min because the inflow rate is 5 L/min and the outflow rate is 3 L/min. The tank's capacity is 150 L, and it currently contains 100 L of water.
When the tank is completely filled, the amount of salt in the tank can be calculated. Since 0.1 kg of salt is present in 1 L of the solution,
0.1 kg/L × 5 L/min × 60 min/hour = 30 kg/hour of salt is added to the tank.
When 3 L/min of the mixture is drained, the concentration of salt decreases.
30 kg/hour ÷ (5 L/min - 3 L/min)
= 15 kg/L
When the tank is completely filled, the amount of salt in the mixture is 15 kg/L.
Answer:
Concentration of mixture when the tank fills to maximum capacity is 15 kg/L.
To know more about increase visit:
https://brainly.com/question/33491846
#SPJ11
For the function h(x)=2^(6x+1), find two functions f(x) and g(x) such that h(x)=f(g(x))
The functions that form the composite function h(x) in this problem are given as follows:
[tex]f(x) = 2^x[/tex]g(x) = 6x + 1.How to obtain the functions?The composite function for this problem is given as follows:
[tex]h(x) = 2^{(6x + 1)}[/tex]
For a composite function, the inner function is applied as the input to the outer function.
Considering the exponential, the inner function is given as follows:
[tex]f(x) = 2^x[/tex]
The exponential is of 6x + 1, hence the outer function is given as follows:
g(x) = 6x + 1.
More can be learned about composite functions at https://brainly.com/question/10687170
#SPJ4
1) Solve the following
a) The reaction of 3A ⟶B + 2C is found to have a 72.2% yield. How many moles of A are needed in order to create 1.167 mol of C?
Report your answer to three decimal places.
b) For the decomposition reaction:
X(s) ⟶Y(g) + Z(s)
A student runs the reaction with a given amount of reactant X, and she calculates the theoretical yield to be 47.3 g of product Z. If there are 0.5 mol of Z present after the reaction is complete, what is the % yield of this reaction? Assume Z has a molar mass of 82 g/mol. Report your answer to two decimal places.
c)
A student is performing a multistep reaction to synthesize an organic compound, shown below in a simplified form:
2A ⟶5B
B ⟶2C
3C ⟶ D
The reactant A has a molar mass of 147.1 g/mol and the final product D has a molar mass of 135 g/mol. Assuming that each step has 100% yield, what final mass of D should be created if the student reacts 72 g of reactant A? Report your answer with one decimal place.
The number of moles of A required to form 1.167 mol of C is 1.751 mol. The % yield of the reaction is 86.60%. The final mass of D formed by reacting 72 g of reactant A is 33.0 g.
For the given chemical reaction 3A ⟶ B + 2C, 72.2% yield is given.
We need to find out the number of moles of A required to form 1.167 mol of C.
Yield = 72.2% = 0.722
Moles of C formed = 1.167 mol
The balanced chemical reaction is,3A ⟶ B + 2C
Total moles of product formed = moles of B + moles of C
= (1/1)mol + (2/1) mol
= 3 mol
Moles of A required to form 1 mol of C = 3/2 mol
Moles of A required to form 1.167 mol of C = (3/2) × 1.167 mol
= 1.7505 mol
≈ 1.751 mol
Therefore, the number of moles of A required to form 1.167 mol of C is 1.751 mol.
Reported answer = 1.751 (to three decimal places).
For the given reaction X(s) ⟶ Y(g) + Z(s), theoretical yield of Z = 47.3 g
Molar mass of Z = 82 g/mol
Moles of Z present after the reaction is complete = 0.5 mol
Let the actual yield be y.
The balanced chemical reaction is,X(s) ⟶ Y(g) + Z(s)
The number of moles of Z produced per mole of X reacted = 1
Therefore, moles of Z produced when moles of X reacted = 0.5 mol
Molar mass of Z = 82 g/mol
Mass of Z produced when moles of X reacted = 0.5 × 82 g
= 41 g
% Yield = (Actual yield ÷ Theoretical yield) × 100
%Actual yield, y = 41 g
% Yield = (41 ÷ 47.3) × 100%
= 86.59%
≈ 86.60%
Therefore, the % yield of the reaction is 86.60%.
Given the reaction:2A ⟶5B
(Step 1)B ⟶2C
(Step 2)3C ⟶D
(Step 3)Molar mass of A = 147.1 g/mol
Molar mass of D = 135 g/mol
Mass of A = 72 g
Number of moles of A = (72 g) ÷ (147.1 g/mol)
= 0.489 mol
According to the chemical reaction,2 mol of A produces 1 mol of D
∴ 1 mol of A produces 1/2 mol of D
Therefore, 0.489 mol of A produces = (1/2) × 0.489 mol of D
= 0.2445 mol of D
Molar mass of D = 135 g/mol
Mass of D produced = 0.2445 mol × 135 g/mol
= 33.023 g
≈ 33.0 g
Therefore, the final mass of D that is created when 72 g of reactant A is reacted is 33.0 g (reported with one decimal place).
In the first part, we have to determine the number of moles of A required to form 1.167 mol of C. This can be calculated by determining the number of moles of B and C formed and then using the stoichiometry of the reaction to determine the number of moles of A used. In the second part, we have to determine the % yield of the reaction using the actual and theoretical yield of the reaction. In the third part, we have to determine the final mass of D formed by reacting 72 g of reactant A using the stoichiometry of the reaction. The three given problems are solved with the help of balanced chemical reactions, stoichiometry, and percentage yield of the reaction.
The number of moles of A required to form 1.167 mol of C is 1.751 mol. The % yield of the reaction is 86.60%. The final mass of D formed by reacting 72 g of reactant A is 33.0 g.
To know more about number visit:
brainly.com/question/3589540
#SPJ11
An acute triangle has sides measuring 10 cm and 16 cm. The length of the third side is unknown.
Which best describes the range of possible values for the third side of the triangle?
x < 12.5, x > 18.9
12.5 < x < 18.9
x < 6, x > 26
6 < x < 26
Answer:
6 < x < 26
Step-by-step explanation:
given 2 sides of a triangle then the third side x is in the range
difference of 2 sides < x < sum of 2 sides , then
16 - 10 < x < 16 + 10 , that is
6 < x < 26
The integers 297,595 , and 2912 are pairwise relatively prime. True False
The integers 297, 595, and 2912 are NOT pairwise relatively prime. The answer is False.
Let's first define what pairwise relatively prime is. Two or more numbers are considered pairwise relatively prime if there is no common factor (other than 1) between them. For instance, 2 and 3 are pairwise relatively prime.
However, 4 and 6 are not, because they share a common factor of 2.
Thus, to determine if the integers 297, 595, and 2912 are pairwise relatively prime or not, we need to compute the greatest common divisor (GCD) for all possible pairs of numbers.
If the GCD is 1 for all pairs, then the integers are pairwise relatively prime.
So we can do it as follows:
For 297 and 595, GCD(297, 595) = 33
For 297 and 2912, GCD(297, 2912) = 33
For 595 and 2912, GCD(595, 2912) = 17
Therefore, since not all pairs have a GCD of 1, the integers 297, 595, and 2912 are NOT pairwise relatively prime.
The answer is False.
Learn more about prime
https://brainly.com/question/4184435
#SPJ11
"The integers 297,595, and 2912 are pairwise relatively prime" is false.
Two integers are considered pairwise relatively prime if their greatest common divisor (GCD) is equal to 1. In this case, we need to check the GCD between each pair of the given integers.
To find the GCD between two numbers, we can use the Euclidean algorithm.
The GCD of 297 and 595 is 1, which means they are relatively prime.
However, the GCD of 595 and 2912 is not equal to 1. By applying the Euclidean algorithm, we find that the GCD is 17. Therefore, 595 and 2912 are not relatively prime.
Since 595 and 2912 are not relatively prime, the statement is false.
Learn more about prime
https://brainly.com/question/34250415
#SPJ11
State the null (H0) and alternative (H1) hypothesis for this ANOVA test and indicate the degrees of freedom for errors (v1 and v2), that should be used to conduct the test (using the F-Distribution) if testing at the 5% level of significance.
The null hypothesis (H0) for this ANOVA test is that there is no significant difference among the means of the groups being compared. The alternative hypothesis (H1) is that there is a significant difference among the means of the groups.
The degrees of freedom for errors (v1 and v2) in this ANOVA test should be (k - 1) and (N - k), respectively, where k is the number of groups being compared and N is the total number of observations.In an ANOVA (Analysis of Variance) test, the null hypothesis (H0) states that there is no significant difference among the means of the groups being compared. This means that any observed differences in means are due to random variation or chance.
The alternative hypothesis (H1), on the other hand, asserts that there is a significant difference among the means of the groups. It suggests that the observed differences are not due to chance and that there are actual differences between the groups.
To conduct the ANOVA test, we need to determine the degrees of freedom for errors (v1 and v2). The degrees of freedom for errors represent the variability within the data and are used to calculate the critical value from the F-distribution. The formula for calculating the degrees of freedom for errors in an ANOVA test is (k - 1) and (N - k), where k is the number of groups being compared and N is the total number of observations.
For example, if we are comparing the means of three groups and we have a total of 30 observations, the degrees of freedom for errors would be (3 - 1) and (30 - 3), which are 2 and 27, respectively.
To conduct the test at the 5% level of significance, we would compare the calculated F-value to the critical F-value obtained from the F-distribution with the appropriate degrees of freedom.
Learn more about Hypothesis
brainly.com/question/32562440
#SPJ11
Solve the given initial value problem.
y''+5y'=0; y(0)=3, y'(0)=-25
The solution is y(t)= ?
The solution to the given initial value problem (y'' + 5y' = 0), with (y(0) = 3) and (y'(0) = -25), is: (y(t) = -2 + 5e^{-5t}).
An initial value problem (IVP) is a type of mathematical problem that involves finding a solution to a differential equation or a difference equation along with an initial condition.
To solve the given initial value problem (y'' + 5y' = 0), with the initial conditions (y(0) = 3) and (y'(0) = -25), we can use the method of solving linear second-order homogeneous differential equations.
Step 1: Find the characteristic equation by assuming (y(t) = e^{rt}), where (r) is a constant.
The characteristic equation is (r^2 + 5r = 0).
Step 2: Solve the characteristic equation to find the values of (r).
Factoring out (r), we get (r(r + 5) = 0).
So, the values of (r) are (r = 0) and (r = -5).
Step 3: Write down the general solution.
Since we have two distinct real roots, the general solution is given by:
[y(t) = c_1e^{0t} + c_2e^{-5t}], where (c_1) and (c_2) are arbitrary constants.
Simplifying this expression, we get:
[y(t) = c_1 + c_2e^{-5t}].
Step 4: Use the initial conditions to find the values of the constants (c_1) and (c_2).
Given (y(0) = 3), we substitute (t = 0) into the general solution:
[3 = c_1 + c_2e^{0} = c_1 + c_2].
Given (y'(0) = -25), we take the derivative of the general solution and substitute (t = 0):
[y'(t) = -5c_2e^{-5t}].
[-25 = -5c_2e^{0} = -5c_2].
Simplifying these equations, we find (c_1 = 3 - c_2) and (c_2 = 5).
Step 5: Substitute the values of (c_1) and (c_2) into the general solution.
Using (c_1 = 3 - c_2 = 3 - 5 = -2), we have:
[y(t) = -2 + 5e^{-5t}].
Therefore, the solution to the given initial value problem (y'' + 5y' = 0), with (y(0) = 3) and (y'(0) = -25), is: (y(t) = -2 + 5e^{-5t}).
Learn more about initial value problem:
https://brainly.com/question/31041139
#SPJ11
The viscosity of the synthesized polymer sample was measured by a falling steel ball viscometer. If the time taken for the steel ball (diameter (D) = 0.03 m and distance (L) = 0.5 m) to fall along L is 25 seconds, then the viscosity of the polymer is... Pa.s. (p = 7500 kg/m and = 800 kg/m) a. 656.6 b. 3324.1 c. 2954.7 d. 164.2
The viscosity of the synthesized polymer sample was found to be 2954.7 Pa.s by measuring it using a falling steel ball viscometer.
The given parameters are:
Diameter (D) = 0.03 m
Distance (L) = 0.5 m
Time (t) = 25 sec
Density of the steel ball (p) = 7500 kg/m³
Density of the polymer sample (μ) = 800 kg/m³
Viscosity of the polymer is given by the formula:η = 2pD²Lg/9t(μ - p)
The viscosity of the polymer can be calculated as follows:
η = 2(7500) (0.03)² (0.5) (9.81)/9(25) (800 - 7500)
η = 2954.7 Pa.s
Thus, the viscosity of the synthesized polymer sample was found to be 2954.7 Pa.s by measuring it using a falling steel ball viscometer.
To know more about viscosity, click here
https://brainly.com/question/30759211
#SPJ11
please help:
given WXYZ is similar to RSTV. find ST
The calculated value of the length of the segment ST is 13.5
How to determine the length of the segment STFrom the question, we have the following parameters that can be used in our computation:
The trapezoids
The length of the segment ST is then calculated as
XY/XW = ST/SR
substitute the known values in the above equation, so, we have the following representation
9/12 = ST/18
So, we have
ST = 18 * 9/12
Evaluate
ST = 13.5
Hence, the length of the segment ST is 13.5
Read more about similar shapes at
https://brainly.com/question/32122930
#SPJ1