The final pressure of the nitrogen gas sample is approximately 6.2 atm.
To find the final pressure, we can use the combined gas law, which states that the product of the initial pressure and initial volume divided by the initial temperature is equal to the product of the final pressure and final volume divided by the final temperature.
Let's denote the initial pressure as P1, the initial volume as V1, the initial temperature as T1, and the final pressure as P2. We are given that P1 = 4.6 atm, V1 decreases by 55%, T1 = -21.0 °C, and the final temperature is 25.0 °C.
First, we need to convert the temperatures to Kelvin by adding 273.15 to each temperature: T1 = 252.15 K and T2 = 298.15 K.
Next, we can substitute the given values into the combined gas law equation:
(P1 * V1) / T1 = (P2 * V2) / T2
Since V1 decreases by 55%, V2 = (1 - 0.55) * V1 = 0.45 * V1.
Now we can solve for P2:
(4.6 atm * V1) / 252.15 K = (P2 * 0.45 * V1) / 298.15 K
Cross-multiplying and simplifying:
4.6 * 298.15 = P2 * 0.45 * 252.15
1367.39 = 113.47 * P2
Dividing both sides by 113.47:
P2 ≈ 12.06 atm
However, we need to round the answer to the correct number of significant digits, which is determined by the given values. Since the initial pressure is given with two significant digits, we round the final pressure to two significant digits:
P2 ≈ 6.2 atm
Therefore, the final pressure of the nitrogen gas sample is approximately 6.2 atm.
Know more about combined gas law here:
https://brainly.com/question/30458409
#SPJ11
Let sets A, B, and C be defined as follows:
A = {x ∈ Z | x = 5a −12 for some integer a},
B = {y ∈ Z | y = 5b + 8 for some integer b}, and
C = {z ∈ Z | z =10c + 2 for some integer c}.
Prove or disprove each of the following statements:
I. A = B
II. B ⊆ C
III. C ⊆ A
For every element z in set C, we can find a corresponding element x = 5a - 12 in set A, where a = 2c + 2. This demonstrates that C is a subset of A.
To prove or disprove the statements, let's examine each one separately:
I. A = B
To prove this, we need to show that every element in set A is also an element in set B, and vice versa.
Let's start by considering an arbitrary element in set A: x = 5a - 12, where a is an integer. We want to find an integer b such that y = 5b + 8 is equal to x.
Setting y = 5b + 8 equal to x = 5a - 12, we can solve for b:
5b + 8 = 5a - 12
5b = 5a - 20
b = a - 4
Therefore, for every element x in set A, we can find a corresponding element y = 5b + 8 in set B, where b = a - 4. This demonstrates that A is a subset of B.
Now let's consider an arbitrary element in set B: y = 5b + 8, where b is an integer. We want to find an integer a such that x = 5a - 12 is equal to y.
Setting x = 5a - 12 equal to y = 5b + 8, we can solve for a:
5a - 12 = 5b + 8
5a = 5b + 20
a = b + 4
Therefore, for every element y in set B, we can find a corresponding element x = 5a - 12 in set A, where a = b + 4. This demonstrates that B is a subset of A.
Since we have shown that A is a subset of B and B is a subset of A, we can conclude that A = B. Thus, statement I is true.
II. B ⊆ C
To prove this, we need to show that every element in set B is also an element in set C.
Let's consider an arbitrary element in set B: y = 5b + 8, where b is an integer. We want to find an integer c such that z = 10c + 2 is equal to y.
Setting z = 10c + 2 equal to y = 5b + 8, we can solve for c:
10c + 2 = 5b + 8
10c = 5b + 6
c = (5b + 6) / 10
c = b/2 + 3/5
Since c is required to be an integer, b/2 must be an integer. This means that b must be an even number.
However, set B contains elements of the form 5b + 8, where b can be any integer. Therefore, there are elements in set B that cannot be expressed in the form 10c + 2, where c is an integer.
Hence, not every element in set B is an element in set C. Therefore, statement II is false.
III. C ⊆ A
To prove this, we need to show that every element in set C is also an element in set A.
Let's consider an arbitrary element in set C: z = 10c + 2, where c is an integer. We want to find an integer a such that x = 5a - 12 is equal to z.
Setting x = 5a - 12 equal to z = 10c + 2, we can solve for a:
5a - 12 = 10c + 2
5a = 10c + 14
a = 2c + 2
Therefore
, for every element z in set C, we can find a corresponding element x = 5a - 12 in set A, where a = 2c + 2. This demonstrates that C is a subset of A.
Since we have shown that C is a subset of A, we can conclude that C ⊆ A. Thus, statement III is true.
To summarize:
I. A = B (True)
II. B ⊆ C (False)
III. C ⊆ A (True)
To know more about number click-
http://brainly.com/question/24644930
#SPJ11
Instructions: Use the given interpretations to translate the following arguments written in predicate logic into natural, English sentences. Ax: "x is an athlete" Bx: " x is brawny" Cx: "x is a champion"
m: "Mary"
g: "Gail" n: "Ned" 1.a. (x)(Ax⊃Bx) b. Am ∙An. /Bm∙Bn 2.a(x)(Ax⊃Bx) b.(x)(Bx⊃Cx)/(x)(Ax⊃Cx)
1.a. For all x, if x is an athlete, then x is brawny.
b. Mary is an athlete and Ned is an athlete. Therefore, Mary is brawny and Ned is brawny.
2.a. For all x, if x is an athlete, then x is brawny.
b. For all x, if x is brawny, then x is a champion. Therefore, for all x, if x is an athlete, then x is a champion.
1.a. The first argument states that if something is an athlete, then it is brawny. This can be understood as a general statement about athletes and their physical attributes.
b. The second part of the argument introduces specific individuals, Mary and Ned, and states that both of them are athletes. Therefore, based on the premise from part a, it can be concluded that Mary is brawny and Ned is brawny.
2.a. The first argument is similar to the previous one, stating that if something is an athlete, then it is brawny.
b. The second part of the argument introduces a new premise, stating that if something is brawny, then it is a champion. Based on this premise, and using the transitive property of implication, it can be concluded that if something is an athlete, then it is a champion.
Learn more about:all x
brainly.com/question/32267629
#SPJ11
A culture medium that is contaminated with 10+ microbial spores per m will be heat sterilised at 121°C At this temperature, the specific death rate can be assumed to be 3.2 min of the contamination must be reduced to a chance of 1 in 1000, estimate the required sterilisation time. A t = 9.35 min
The estimated required sterilization time is approximately 2.1574 minutes.
To estimate the required sterilization time for a culture medium contaminated with 10+ microbial spores per m³, we can use the concept of the specific death rate. The specific death rate refers to the rate at which microorganisms are killed during sterilization.
Given that the specific death rate at 121°C is 3.2 minutes, and we want to reduce the contamination to a chance of 1 in 1000, we can calculate the required sterilization time.
First, let's define the variables:
N₀ = initial number of spores per m³ (10+ microbial spores per m³)
Nₜ = number of spores per m³ after time t
k = specific death rate (3.2 min⁻¹)
P = probability of survival after time t (1 in 1000)
Now, let's use the formula for the specific death rate:
Nₜ = N₀ * e^(-kt)
We want to find the time t required to achieve a probability of survival of 1 in 1000. In other words, we want P = 1/1000.
P = e^(-kt)
Taking the natural logarithm of both sides, we get:
ln(P) = -kt
Solving for t, we have:
t = -ln(P) / k
Substituting P = 1/1000 and k = 3.2 min⁻¹ into the equation, we can calculate the required sterilization time.
t = -ln(1/1000) / 3.2
Using a scientific calculator, we can find that ln(1/1000) is approximately -6.9078. Substituting this value into the equation, we have:
t = -(-6.9078) / 3.2
t = 6.9078 / 3.2
t ≈ 2.1574 minutes
Therefore, the estimated required sterilization time is approximately 2.1574 minutes.
It's important to note that this is an estimated time based on the specific death rate and probability of survival given. Actual sterilization times may vary depending on other factors such as the type of microorganisms present, the heat transfer rate, and the effectiveness of the sterilization equipment.
Know more about sterilization here:
https://brainly.com/question/33532853
#SPJ11
Suppose you scored 81,75,79, and 91 on your four exams in a mathematics course. Calculate the range and standard deviation of your exam scores. Round the mean to the nearest tenth to calculate the standard deviation. The range of the exam scores is (Simplify your answer.)
The range and standard deviation of your exam scores is 16 and 5.87, respectively.
The range is calculated by finding the difference between the highest and lowest values in a set of data. In this case, the highest score is 91 and the lowest score is 75. Subtracting 75 from 91, we get a range of 16.
The standard deviation measures the variability or spread of a set of data. To calculate the standard deviation, we first need to find the mean (average) of the exam scores.
To find the mean, add up all the scores and divide the sum by the total number of scores. In this case, the sum of the scores is 81 + 75 + 79 + 91 = 326. Since there are 4 scores, we divide 326 by 4 to get a mean of 81.5 (rounded to the nearest tenth).
Next, for each score, subtract the mean and square the result. Then, sum up all these squared differences.
For the score 81: (81 - 81.5)² = 0.25
For the score 75: (75 - 81.5)² = 42.25
For the score 79: (79 - 81.5)² = 6.25
For the score 91: (91 - 81.5)² = 89.25
Summing up these squared differences, we get 0.25 + 42.25 + 6.25 + 89.25 = 138.
To calculate the variance, divide this sum by the number of scores (4) to get 138/4 = 34.5.
Finally, to find the standard deviation, take the square root of the variance. The square root of 34.5 is approximately 5.87 (rounded to the nearest hundredth).
So, the range of the exam scores is 16 and the standard deviation is 5.87.
Learn more about standard deviation here: https://brainly.com/question/24298037
#SPJ11
Most engaged couples expect or at least hope that they will have high levels of marital satisfaction. However, because 54% of first marriages end in divorce, social scientists have begun investigating influences on marital satisfaction. (Data Source: These data were obtained from the National Center for Health Statistics. ) Suppose a counseling psychologist sets out to look at the role of having children in relationship longevity. A sample of 78 couples with children score an average of 51. 1 with a sample standard deviation of 4. 7 on the Marital Satisfaction Inventory. A sample of 94 childless couples score an average of 45. 2 with a sample standard deviation of 12. 1. Higher scores on the Marital Satisfaction Inventory indicate greater satisfaction.
Suppose you intend to conduct a hypothesis test on the difference in population means. In preparation, you identify the sample of couples with children as sample 1 and the sample of childless couples as sample 2. Organize the provided data by completing the following table:
To organize the provided data, we can create a table comparing the samples of couples with children (sample 1) and childless couples (sample 2) as follows:
Sample Sample Size Sample Mean Sample Standard Deviation
1 78 51.1 4.7
2 94 45.2 12.1
In this table, we have listed the sample number (1 and 2), the sample size (number of couples in each group), the sample mean (average Marital Satisfaction Inventory score), and the sample standard deviation (measure of variability in the scores) for each group. This organization allows us to compare the data and proceed with hypothesis testing on the difference in population means between the two groups.
Learn more about data from
https://brainly.com/question/30459199
#SPJ11
Calculate the pH of 100.00mL of 0.15 M HF solution after 110.00 mL of KOH 0.15 M have been added. Ka HF = 6.6x10^-4
the pH of the solution after adding 110.00 mL of KOH 0.15 M to 100.00 mL of 0.15 M HF solution is approximately 3.22.
To calculate the pH of the solution, we need to consider the reaction between HF and KOH. The balanced equation is:
HF + KOH → KF + H2O First, let's calculate the moles of HF and KOH: moles of HF = concentration of HF × volume of HF solution = 0.15 M × 0.100 L = 0.015 mol moles of KOH = concentration of KOH × volume of KOH solution = 0.15 M × 0.110 L = 0.0165 mol
Since HF and KOH react in a 1:1 ratio, the limiting reactant is HF (0.015 mol).
This means that all the HF will react, leaving some KOH unreacted. Now, let's find the concentration of HF after the reaction:
concentration of HF = moles of HF / total volume of solution = 0.015 mol / (0.100 L + 0.110 L) = 0.0698 M
Next, we can calculate the concentration of F- (the conjugate base of HF): concentration of F- = moles of F- / total volume of solution = moles of KOH / (volume of HF + volume of KOH) = 0.0165 mol / (0.100 L + 0.110 L) = 0.0762 M
Now, let's use the given Ka value to find the concentration of H+: Ka = [H+][F-] / [HF] [H+] = Ka × [HF] / [F-] = (6.6 × 10^-4)(0.0698 M) / (0.0762 M) = 6.0 × 10^-4 M
Finally, we can find the pH using the equation: pH = -log[H+] = -log(6.0 × 10^-4) ≈ 3.22
To know more about equation visit:
brainly.com/question/29538993
#SPJ11
Which of the following observations is consistent with a zero order reaction?a. A graph of reactant concenration vs time is linear b. The half life of the reaction gets longer as concentration decreases c. A graph of inverse reactant concentration vs time is linear d.The half life of the reaction is independent of concentration
a). A graph of reactant concenration vs time is linear. is the correct option. The observation that is consistent with a zero-order reaction is "A graph of reactant concentration vs time is linear."
The zero-order reaction is a reaction where the rate of reaction is independent of the concentration of reactants, i.e., the reaction rate is constant. A zero-order reaction is characterized by a linear graph of concentration vs time. Here are the observations for each option: b.The half-life of the reaction gets longer as concentration decreases. This observation is consistent with the first-order reaction. c. A graph of inverse reactant concentration vs time is linear.
This observation is consistent with the second-order reaction. d.The half-life of the reaction is independent of concentration. This observation is consistent with the zero-order reaction, however, it is not the observation that is specifically related to a zero-order reaction.
To know more about zero-order reaction visit:
brainly.com/question/13490912
#SPJ11
Given information about the train routes of Keretapi Anda Express in Table 1. Statements A,B,C,D and E give information about the train routes: Statement A : Suppose R is a relation that represents digraph of the train routes. Therefore, R={(1,2),(2,1),(3,4),(4,3),(4,5),(3,2)} Statement B : The relation R is not reflexive since (7,7)∈/R Statement C: The relation R is symmetric. Statement D : The relation R is not transitive since (1,1)∈R. Statement E : The relation R is not equivalence since it is symmetric, but not reflexive and not transitive. Statements A,B,C,D and E have been written incorrectly. Rewrite all statements, completely and correctly. [10 marks]
The relation R is not an 9 because it is symmetric, but not reflexive and not transitive. Statement E is correct because an equivalence relation must be reflexive, symmetric, and transitive.
Table 1 presents the train routes for Keretapi Anda Express. Statements A, B, C, D, and E give additional information about the train routes: Statement A: Let R be a relation that represents a digraph of the train routes.
Thus, R = {(1, 2), (2, 1), (3, 4), (4, 3), (4, 5), (3, 2)}.
Statement A is true because it correctly represents a digraph of the train routes.
Statement B: The relation R is not reflexive because (7, 7) ∉ R.
Statement B is incorrect because it says (7, 7), which is not part of R. The correct statement would be: The relation R is not reflexive because for every a in R, (a, a) ∉ R.
To know more about digraph visit:
https://brainly.com/question/30688991
#SPJ11
It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. find the discharge (m^3 /s) by using Kutter Gand Ganguillet's equation. n=0.020
It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. Using Kutter Gand Ganguillet's equation the discharge is 4.719 m³/s.
Given: Diameter of the pipe (D) = 3 m
Depth of flow (y) = 0.75 m
Loss of head (h) = 3 m per km length = 3/1000 m per m length= 0.003 m/m length
N = 0.020
Discharge (Q) = ?
Formula used: Kutter's formula is given by;
Where f = (1/n) {1.811 + (6.14 / R)} ... [1]
Here, R = hy^(1/2)/A
where A = πD²/4
For circular pipes, hydraulic mean depth is given by; Where A = πD²/4 and P = πD.= πD^3/2
Therefore, the discharge is given by the following formula;
Where V = Q/A and A = πD²/4= Q / πD²/4 = 4Q/πD²
Substituting equation [1] and the above values in the discharge formula, we have
On simplifying, we get; Therefore, the discharge is 4.719 m³/s (approx).
Hence, the discharge is 4.719 m³/s.
Learn more about Kutter Gand Ganguillet's
https://brainly.com/question/33139670
#SPJ11
It is known that for a certain stretch of a pipe, the head loss is 3 m per km length. For a 3.0 m diameter pipe, if the depth of flow is 0.75 m. The discharge is approximately 1.25 m^3/s.
To calculate the discharge using the Kutter-Ganguillet equation, we need to use the formula:
Q = (1.49/n) * A * R^(2/3) * S^(1/2)
Where:
Q is the discharge,
n is the Manning's roughness coefficient (given as 0.020),
A is the cross-sectional area of the flow,
R is the hydraulic radius, and
S is the slope of the energy grade line.
First, we need to find the cross-sectional area (A) and hydraulic radius (R) of the flow. The cross-sectional area can be calculated using the formula:
A = π * (D/2)^2
Where D is the diameter of the pipe, given as 3.0 m. Plugging in the values:
A = π * (3.0/2)^2
A = 7.07 m^2
Next, we need to calculate the hydraulic radius (R), which is defined as:
R = A / P
Where P is the wetted perimeter of the flow. For a circular pipe, the wetted perimeter can be calculated as:
P = π * D
Plugging in the values:
P = π * 3.0
P = 9.42 m
Now we can find the hydraulic radius:
R = A / P
R = 7.07 / 9.42
R = 0.75 m
Finally, we can calculate the discharge (Q) using the Kutter-Ganguillet equation:
Q = (1.49/0.020) * 7.07 * (0.75)^(2/3) * (3)^(1/2)
Q ≈ 1.25 m^3/s
Therefore, the discharge is approximately 1.25 m^3/s.
Learn more about discharge
https://brainly.com/question/31710428
#SPJ11
The hydration of this molecule above would lead to two molecules. Which would be the major species? pentane pentan-1-ol pentan-2-ol pentan-1,2-diol propanoic acid and ethanol with heat and an acid catalyst will yield a ether ester amide amine
Hydration is the addition of water to an alkene or alkyne in the presence of a catalyst such as a mineral acid like sulfuric acid. This reaction is a reversible reaction, and in this case, it is an addition reaction. The hydration of pent-1-ene would produce two products pentan-1-ol and pentan-2-ol. Pentan-1-ol would be the major species.
Below is an explanation:The molecule pent-1-ene is an unsaturated hydrocarbon that has a double bond between the first and second carbon atom, as shown in the figure below.When pent-1-ene is hydrated in the presence of an acid catalyst and water, it would produce two molecules, pentan-1-ol, and pentan-2-ol. The reaction would proceed as shown below:The reaction is reversible; hence it can go forward or backward.
However, the forward reaction is more favored than the backward reaction. The major species that would be produced in this reaction is pentan-1-ol.The reaction between propanoic acid and ethanol in the presence of heat and an acid catalyst would lead to the formation of an ester.
The reaction between the two compounds is shown below:Thus, the major product of the reaction between propanoic acid and ethanol in the presence of heat and an acid catalyst is an ester.
For more information on Hydration visit:
brainly.com/question/30373695
#SPJ11
Project X has an initial investment cost of $20.0 million. After 10 years it will have a salvage value of $2.0 million. This project will generate annual revenues of $5.5 million per year and will have an annual operating cost of $1.8 million. What is the internal rate of return of this investment, assuming a 10-year life of the project?
A. 8.5% .
B. 10.3 %. C 13.8%. D. 15.1%
Answer: The internal rate of return of this investment is 15.1%. The correct option is D.
Explanation:
Internal rate of return (IRR) is the discount rate that makes the net present value (NPV) of an investment zero. In other words, it is the rate at which the sum of all future cash flows (positive and negative) from an investment equals its initial cost. The IRR is also referred to as the discounted cash flow rate of return.
The formula for calculating IRR is:
Where: NPV = net present value
CFt = the cash flow in period t
r = the discount rate Project X has an initial investment cost of $20.0 million, an annual operating cost of $1.8 million, an annual revenue of $5.5 million, and a salvage value of $2.0 million after ten years.
Therefore, the total revenue over ten years will be:
Revenue = $5.5 million x 10 years = $55 million.
The total cost over ten years will be:
Cost = ($1.8 million + $20 million) x 10 years = $198 million.
The net cash flow (NCF) over ten years is:
NCF = Revenue – Cost + Salvage Value
= $55 million – $198 million + $2 million = -$141 million.
To calculate the IRR, we need to find the discount rate that makes the NPV of the investment equal to zero.
We can do this using a financial calculator or spreadsheet software. However, we can also use trial and error by trying different discount rates until we get an NPV close to zero.
Using this method, we find that the IRR of Project X is approximately 15.1%, which is closest to option D.
Therefore, the correct option is D. 15.1%.
To know more about investment, visit:
https://brainly.com/question/14921083
#SPJ11
Tertiary alcohols cannot be oxidized because A) there are no oxygen atoms to remove from the alcohol carbon B) there are no hydrogen atoms attached to the alcohol carbon C) the alcohol carbon is bonded to four groups so no oxygen can be added to it D) the alcohol carbon is bonded to four groups so no hydrogen can be added to it E) the alcohol carbon is too electronegative to have hydrogen removed from it A
The correct answer is C) the alcohol carbon is bonded to four groups so no oxygen can be added to it.
Tertiary alcohols have the alcohol carbon atom bonded to three alkyl (or aryl) groups, making it unable to undergo oxidation reactions. Oxidation of alcohols typically involves the removal of hydrogen atoms or addition of oxygen atoms to the alcohol carbon. In the case of tertiary alcohols, the alcohol carbon is already fully saturated with three alkyl groups, leaving no available hydrogen atoms for removal or space for the addition of an oxygen atom.
Therefore, tertiary alcohols cannot be oxidized.In the case of tertiary alcohols, the alcohol carbon is bonded to three alkyl (or aryl) groups. This means that all four valence electrons of the carbon atom are already occupied, forming stable carbon-carbon (C-C) bonds with the alkyl groups. As a result, there are no available hydrogen atoms bonded to the alcohol carbon that can be removed during oxidation.
Additionally, since the alcohol carbon is already bonded to four groups (the three alkyl groups and the hydroxyl group), there is no room for the addition of an oxygen atom. Oxidation reactions typically involve the addition of an oxygen atom to the alcohol carbon to convert it into a carbonyl group (such as a ketone or aldehyde).
However, in the case of tertiary alcohols, the alcohol carbon is already fully saturated, making it incapable of accepting an additional oxygen atom.Therefore, due to the absence of available hydrogen atoms and the inability to accommodate additional oxygen atoms, tertiary alcohols cannot be oxidized.
Learn more about alcohal here:
https://brainly.com/question/31091508
#SPJ8
Required information NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part A sliding door with weight F= 300 lb is mounted on a horizontal rail as shown in the figure. The coefficients of static friction between the rail and the door at A and Bare 0.15 and 0.25, respectively -5fB N 6 ft Determine the horizontal force that must be applied to the handle in order to move the door to the right. The horizontal force that must be applied to the handle is Ib(Click to select)
The horizontal force that must be applied to the handle in order to move the door to the right is 120 lb.
To determine the horizontal force that must be applied to the handle in order to move the door to the right, we need to consider the forces acting on the door and the coefficients of static friction at points A and B.
Given:
Weight of the door (F) = 300 lb
Coefficient of static friction at point A (μA) = 0.15
Coefficient of static friction at point B (μB) = 0.25
Distance from point A to the handle (d) = 6 ft
Since the door is in equilibrium, the sum of the horizontal forces acting on the door must be zero. This means the applied force at the handle must overcome the frictional forces at points A and B.
The maximum frictional force at point A is given by:
F_frictionA = μA * F
Substituting the given values:
F_frictionA = 0.15 * 300 lb
F_frictionA = 45 lb
Similarly, the maximum frictional force at point B is given by:
F_frictionB = μB * F
Substituting the given values:
F_frictionB = 0.25 * 300 lb
F_frictionB = 75 lb
To move the door to the right, the applied force at the handle must overcome the frictional force at point A and the frictional force at point B. Therefore, the total horizontal force required is the sum of these two frictional forces:
Total horizontal force = F_frictionA + F_frictionB
Total horizontal force = 45 lb + 75 lb
Total horizontal force = 120 lb
Hence, the horizontal force that must be applied to the handle in order to move the door to the right is 120 lb.
To know more about horizontal visit
https://brainly.com/question/29019854
#SPJ11
Which of the following statements best describes an ionic bond? a)It's an acid b)It's also called a molecule c)It's a bond between a metal and a nonmetal d)It's a bond between a nonmetal and a nonmetal e)Shares electrons in a bond
The correct statement that best describes an ionic bond is c) It's a bond between a metal and a nonmetal.
Ionic bonds occur when there is a complete transfer of electrons from a metal atom to a nonmetal atom, resulting in the formation of ions. The metal atom loses electrons to become a positively charged cation, while the nonmetal atom gains electrons to become a negatively charged anion.
The resulting attraction between these oppositely charged ions forms an ionic bond. Ionic compounds, such as sodium chloride (NaCl) or calcium carbonate (CaCO3), are examples of substances held together by ionic bonds. In these compounds, the positive and negative ions are arranged in a repeating pattern called a crystal lattice.
It's important to note that in an ionic bond, there is no sharing of electrons between the atoms involved. Instead, there is a complete transfer of electrons from one atom to another, leading to the formation of charged ions that are attracted to each other. The correct answer is C.
Know more about ionic bonds here: brainly.com/question/11527546
#SPJ11
Sonia has a big test tomorrow and she hasn't started studying. It is 5pm now and she drinks a
deluxe sized coffee with 200 mg of caffeine. The average half life of caffeine is 6 hours, meaning
that every 6 hours the amount of caffeine in her systems reduces by 50%. How many milligrams
of caffeine will be in her system by 4am? Round your answer to the nearest tenth of a mg.
Answer:
Not sure but i think 183.333333333
3. Design a square column footing for a 400-mm square tied interior column that supports a dead load Pn = 890 kN and a live load P₁ = 710 kN. The column is reinforced with eight 25 mm bars, the base of the footing is 1500 mm below grade, the soil weight is 1600 kg/m³, fy = 413.7 MPa, f = 20.7 MPa (p = 2400 kg/m³), and qa = 240 kPa.
The designed square column footing for the given conditions will have a side length of 450 mm and will satisfy the reinforcement requirement.
To design a square column footing, we need to consider the applied loads, the column reinforcement, and the properties of the soil. Here's the step-by-step process:
Step 1: Determine the total applied load
The total applied load on the column footing is the combination of the dead load (Pn) and the live load (P₁):
Total Load (P) = Pn + P₁
Total Load (P) = 890 kN + 710 kN
Total Load (P) = 1600 kN
Step 2: Calculate the area of the footing
Since the column is square with a side length of 400 mm, the area of the footing is calculated as:
Footing Area (A) = (Column Side Length)²
Footing Area (A) = (400 mm)²
Footing Area (A) = 160,000 mm²
Step 3: Determine the bearing capacity of the soil
The bearing capacity of the soil (q) is given by the formula:
q = qa + (γ × B × Nc)
Where:
qa = Allowable soil pressure
= 240 kPa
γ = Unit weight of soil
= 1600 kg/m³
B = Width of the footing
= Column Side Length
= 400 mm
Nc = Bearing capacity factor for a square footing
= 5.14 (from bearing capacity tables)
Substituting the values:
q = 240 kPa + (1600 kg/m³ × 400 mm × 5.14)
q = 240 kPa + 4,115,200 kg/m²
q = 240 kPa + 4.1152 MPa
q ≈ 4.3552 MPa
Step 4: Check the allowable bearing pressure
The allowable bearing pressure is calculated as:
Allowable Bearing Pressure (p) = 0.45 × f
p = 0.45 × 20.7 MPa
p ≈ 9.315 MPa
Step 5: Calculate the required footing area
The required footing area can be calculated by dividing the total load by the allowable bearing pressure:
Required Footing Area (A_req) = Total Load (P) / Allowable Bearing Pressure (p)
A_req = 1600 kN / 9.315 MPa
A_req ≈ 171.683 m²
Step 6: Determine the required side length of the footing
Since the footing is square, we can calculate the side length by taking the square root of the required footing area:
Footing Side Length (L) = √(Required Footing Area)
L = √(171.683 m²)
L ≈ 13.105 m
Since the column is 400 mm square, we need to round up the footing side length to the nearest larger multiple of the column side length. Therefore, the footing side length will be 450 mm (0.45 m).
Step 7: Verify the reinforcement requirement
The reinforcement requirement is determined based on the applied loads and the column size. In this case, since the column is reinforced with eight 25 mm bars, the reinforcement area (As) is calculated as:
Reinforcement Area (As) = Number of Bars × Cross-sectional Area of One Bar
As = 8 × (π/4) × (25 mm)²
As ≈ 1570.796 mm²
The minimum reinforcement requirement is typically 0.4% to 0.8% of the footing area. Let's calculate the minimum reinforcement:
Minimum Reinforcement (As_min) = 0.004 × Footing Area
As_min = 0.004 × 171.683 m²
As_min ≈ 0.686732 m²
Convert As_min to mm² for easier comparison:
As_min ≈ 686,732 mm²
Since As is greater than As_min, the reinforcement requirement is satisfied.
In summary, the designed square column footing for the given conditions will have a side length of 450 mm and will satisfy the reinforcement requirement.
To know more about square visit
https://brainly.com/question/22827180
#SPJ11
4-The steel tube is bonded to the aluminum rod. If a torque of T="see above" kN.m is applied to end A. Find maximum and minimum shear stress in each material. Sketch shear stress distribution. (Gtt=80GPa,Gal=25GPa).
The torque is shared between these two materials.
The shear stress in the aluminum rod is obtained asτ_al [tex]= [(T x 10⁶) / (2.654 x 10⁷)] x [(D_t + D_al)/4]τ_al = (T/663.5) x (60/4)τ_al = (T/44.23) MPa[/tex]
The torque is resisted by both the steel tube and the aluminum rod.
Maximum shear stress in each material,τ_max = (T/J) x (D/2) ,
where D is the diameter of the steel tube or the aluminum rodSteel tube:
The torque is resisted by the steel tube only.
Therefore,τ_max(tube)[tex]= (T/J) x (D_t/2)τ_max(tube) = [(T x 10⁶) / (2.654 x 10⁷)] x (40/2)τ_max(tube) = (T/663.5) MPa Aluminum rod:[/tex]
Maximum and minimum shear stress in each material are:
Maximum shear stress in steel tube, τ_max(tube) = (T/663.5) MPa
Minimum shear stress in steel tube, τ_min(tube) = -τ_max(tube)
Minimum shear stress in aluminum rod, τ_min(al) = -τ_al
Maximum shear stress in aluminum rod, τ_max(al) = τ_al
The maximum and minimum shear stress in each material can be represented graphically as shown below:
Graphical representation of maximum and minimum shear stress in each material
To know more about resisted visit:
https://brainly.com/question/33728800
#SPJ11
Members of which class of biomolecules are the building blocks of proteins? a)núcleic acids b)glycerols amino acids c)fatty acids d)monosaccharides
The class of biomolecules which pertains to the building blocks of proteins are b) amino acids.
Amino acids are the building blocks of proteins. Proteins are large, complex molecules made up of chains of amino acids linked together by peptide bonds. There are 20 different types of amino acids that can be found in proteins, each with its own unique side chain. These side chains give each amino acid its specific properties and functions.
When amino acids are linked together in a specific sequence, they form polypeptides, which then fold into complex three-dimensional structures to become functional proteins. The sequence of amino acids in a protein is determined by the genetic code, which is encoded in DNA.
In summary, amino acids are the building blocks of proteins. They are linked together in a specific sequence to form polypeptides, which then fold into functional proteins. The sequence of amino acids is determined by the genetic code. Hence, the correct answer is Option B.
Learn more about Amino acids here: https://brainly.com/question/28362783
#SPJ11
What kind of IMF exist amongs?
1) NH3 molecules
2) HCL(g) molecules
3) CO2(g)
4)N2(g) molecules .
Among the given molecules:
1) NH3 molecules: NH3 (ammonia) exhibits hydrogen bonding due to the presence of a hydrogen atom bonded to a highly electronegative nitrogen atom. This results in strong dipole-dipole interactions between NH3 molecules.
2) HCl(g) molecules: HCl (hydrochloric acid) also exhibits dipole-dipole interactions due to the polar nature of the H-Cl bond. However, the strength of these interactions is generally weaker compared to hydrogen bonding in NH3.
3) CO2(g): CO2 (carbon dioxide) molecules do not exhibit permanent dipole moments and therefore do not have dipole-dipole interactions. The dominant intermolecular force in CO2 is London dispersion forces, which arise from temporary fluctuations in electron distribution and induce temporary dipoles.
4) N2(g) molecules: N2 (nitrogen gas) is a nonpolar molecule with no permanent dipole moment. The main intermolecular force in N2 is also London dispersion forces.
In summary, NH3 exhibits hydrogen bonding, HCl exhibits dipole-dipole interactions, CO2 primarily experiences London dispersion forces, and N2 is also subject to London dispersion forces.
Learn more about intermolecular force from the given link:
https://brainly.com/question/17111432
#SPJ11
The positive square root of 0. 1445 by division method
The positive square root of 0.1445 by division method is approximately 0.38 (correct to two decimal places).
To find the positive square root of 0.1445 by division method, we can follow these steps:
Step 1: Add a decimal point after the first digit to make it 0.14. Step 2: Pair the digits from the decimal point in pairs starting from the decimal point and moving left. If there is an odd number of digits, pair the leftmost digit with a zero. So, we have: 0. 14 45 Step 3: Find the largest number whose square is less than or equal to 14. Write this number on top of the paired digits and subtract its square from 14. The largest number whose square is less than or equal to 14 is 3. 3 | 0.14 45 9
5 14 4 89
255
Step 4: Bring down the next pair of digits (45) and double the quotient (3) to get the dividend for the next step. So, we have: 3 | 0.14 45 9
5 14 4 89
255
249
---
66
Step 5: Find the largest digit d such that 6d multiplied by d is less than or equal to 66. Write this digit on top of the remainder (66) to get the next digit of the square root.
The largest digit d such that 6d multiplied by d is less than or equal to 66 is 7.
So, we have:
3 | 0.14 45
9 4
5 14 66 4 89
255
249
---
66
63
--
3
Step 6: Repeat steps 4 and 5 until you have found the desired number of decimal places. In this case, we stop here since we only need to find the square root correct to two decimal places.
Therefore, the positive square root of 0.1445 by division method is approximately 0.38 (correct to two decimal places).
Learn more about square root from
https://brainly.com/question/428672
#SPJ11
I need help with this question
Answer:
(8,0)
Step-by-step explanation:
Our given expression is [tex]f(x) = x^{2} - 16x + 64[/tex]
The x-intercept is x when y = 0, so simply rewrite the expression as [tex]0 = x^{2} - 16x + 64[/tex] and solve for x.
x = 8, which means that your x-intercept is (8,0).
1.35 mol sample of methane gas at a temperature of 25.0°C is found to occupy a volume of 29.7 liters. The pressure of this gas sample is ________mmHg.
The pressure of the methane gas sample at a temperature of 25.0°C and a volume of 29.7 liters is approximately 1410.4 mmHg.
To calculate the pressure of a methane gas sample, we can use the ideal gas law equation PV = nRT, where P is the pressure in atmospheres, V is the volume in liters, n is the number of moles, R is the universal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.
Given:
Number of moles (n) = 1.35 mol
Volume (V) = 29.7 L
Temperature (T) = 25.0°C = 25.0 + 273.15 = 298.15 K
We can rearrange the ideal gas law equation to solve for pressure:
P = (nRT) / V
Substituting the given values:
P = (1.35 mol x 0.08206 L atm/mol K x 298.15 K) / 29.7 L
Calculating this expression gives:
P ≈ 1410.4 mmHg (rounded to one decimal place)
Learn more about temperature
https://brainly.com/question/7510619
#SPJ11
Add. −12+(−20) Enter your answer in the box.
Answer: -31
Step-by-step explanation:
-12+(-21) is equal to -12-21 which is -31
The correct answer is:
-32Work and explanation:
Remember the integer rule:
[tex]\sf{a+(-b)=a-b}[/tex]
Similarly
[tex]\sf{-12+(-20)=-12-20}[/tex]
Simplify
[tex]\sf{-32}[/tex]
Therefore, the answer is -32.What is the final volume V₂ in milliliters when 0.824 L of a 43.8 % (m/v) solution is diluted to 22.2 % (m/v)?
To find the final volume V₂ in milliliters, use the dilution equation with initial concentrations 43.8% and 22.2%, and solve for V₂ by dividing both sides by 0.222.
To find the final volume V₂ in milliliters when a solution is diluted, we can use the equation for dilution:
C₁V₁ = C₂V₂
Where C₁ is the initial concentration, V₁ is the initial volume, C₂ is the final concentration, and V₂ is the final volume.
Given:
C₁ = 43.8% (m/v)
V₁ = 0.824 L
C₂ = 22.2% (m/v)
We need to find V₂.
First, let's convert the initial and final concentrations to decimal form:
C₁ = 43.8% = 0.438
C₂ = 22.2% = 0.222
Now we can substitute the values into the dilution equation:
0.438 * 0.824 = 0.222 * V₂
Solving for V₂:
0.360312 = 0.222 * V₂
Dividing both sides by 0.222:
V₂ = 0.360312 / 0.222
V₂ ≈ 1.625 L
Since the question asks for the volume in milliliters, we need to convert liters to milliliters:
1 L = 1000 mL
So, V₂ ≈ 1.625 * 1000 = 1625 mL
Therefore, the final volume V₂ is approximately 1625 milliliters.
To know more about dilution equation Visit:
https://brainly.com/question/29361339
#SPJ11
!!!!HELP ASAP!!!! 100 Points!!!
Ben went to the ice-cream shop and purchased one scoop of rocky road ice-cream (shaped like a cylinder) on a sugar cone (shaped like a cone). The diameter of the scoop was 2.5 in. and the height was 4.25 in. What is the exact volume of the composite figure (the scoop of ice-cream atop a sugar cone) rounded to the nearest hundreth?
Answer:
Step-by-step explanation:
To find the volume of the composite figure, we need to find the volumes of the half-sphere and the cylinder separately, and then add them together.
The volume of the half-sphere is given by the formula:
V_half_sphere = (2/3)πr^3
where r is the radius of the half-sphere. In this case, the radius is 3 cm, so we have:
V_half_sphere = (2/3)π(3)^3
V_half_sphere = (2/3)π(27)
V_half_sphere = 18π
The volume of the cylinder is given by the formula:
V_cylinder = πr^2h
where r is the radius of the base of the cylinder, h is the height of the cylinder. In this case, the radius is 3 cm and the height is 10 cm, so we have:
V_cylinder = π(3)^2(10)
V_cylinder = 90π
To find the volume of the composite figure, we add the volumes of the half-sphere and the cylinder:
V_composite = V_half_sphere + V_cylinder
V_composite = 18π + 90π
V_composite = 108π
Therefore, the exact volume of the composite figure is 108π cubic centimeters.
1 ) Inflation causes things to cost more, and for our money to buy less (hence your grandparents saying "In my day, you could buy a cup of coffee for a nickel"). Suppose inflation decreases the value of money by 4% each year. In other words, if you have $1 this year, next year it will only buy you $0.96 worth of stuff. How much will $100 buy you in 10 years? $_____ 2) Assume there is a certain population of fish in a pond whose growth is described by the logistic equation. It is estimated that the carrying capacity for the pond is 1200 fish. Absent constraints, the population would grow by 130% per year.
If the starting population is given by p0=600, then after one breeding season the population of the pond is given by p1= After two breeding seasons the population of the pond is given by p2 =
Inflation decreases the value of money by 4% each year. For $1, the next year it will only buy [tex]$0.96[/tex] worth of stuff. The actual value of money decreases by [tex](100-96)/100=4/100=0.04.[/tex]
To find v_n, we multiply the initial value [tex]$100[/tex] with the decreased value of each year [tex](1-0.04) over n=10[/tex] years. [tex]v_n= $100(1-0.04)^10v_n= $100(0.96)^10v_n= $100(0.634) = $63.40[/tex]
The actual value of[tex]$100[/tex] after 10 years will be [tex]$63.40.2[/tex]) Given, Starting population of the fish pond is p0=600 and the carrying capacity for the pond is 1200 fish.
To calculate the population after the first breeding season, we need to find the constant of proportionality.
Given, The population of the fish pond grows by 130% per year.\
So,
[tex]a = 1.3p1 = p0 / (1+ a*(p0))[/tex]
[tex]p1= 600 / (1 + 1.3*(600))p1 = 600 / (1 + 780)p1 = 600/781[/tex]
After the first breeding season, the population of the fish pond is 600/781.
Two breeding seasons: To calculate the population after the second breeding season, we need to use the p1 calculated in the previous step.
[tex]p2= p1 / (1+ a*(p1))p2= (600/781) \\(1+ 1.3*(600/781))p2= (600/781) \\(1+ 780/781)p2 = 467400 / 609961[/tex]
The population of the fish pond after two breeding seasons is 467400/609961.
To know more about decreases visit:
https://brainly.com/question/32610704
#SPJ11
Please help with the question,
will give a good rating for the correct answer.
Derive the Velocity equation of the piston from its position equation. In order to derive position use/learn product-rule, power rule, and chain-rule of calculus. This is a straight forward derivation
To derive the velocity equation of the piston from its position equation, differentiate the position equation with respect to time using the product rule, power rule, and chain rule of calculus.
Let's start with the position equation of the piston, denoted as x(t), where t represents time:
x(t) = f(t * g(t)
Here, f(t) and g(t) are differentiable functions of time.
The velocity equation is the derivative of the position equation with respect to time:
v(t) = d/dt [x(t)]
Using the product rule of differentiation, the derivative of the product of two functions is:
d/dt [f(t) * g(t)] = f'(t) * g(t) + f(t) * g'(t)
Now, let's apply the product rule to differentiate the position equation:
v(t) = d/dt [f(t) * g(t)]
= f'(t) * g(t) + f(t) * g'(t)
The derivative of f(t) with respect to time, denoted as f'(t), represents the rate of change of the first function. Similarly, g'(t) represents the rate of change of the second function.
The power rule states that if a function h(t) is of the form h(t) = t^n, where n is a constant, then its derivative is:
d/dt [t^n] = n * t^(n-1)
We can use the power rule to find the derivatives of f(t) and g(t) if they are in a simple form like t^n.
Finally, by substituting the derivatives of f(t) and g(t) into the velocity equation, we obtain the velocity equation of the piston in terms of f'(t) and g'(t):
v(t) = f'(t) * g(t) + f(t) * g'(t)
for such more question on velocity equation
https://brainly.com/question/80295
#SPJ8
A cantilever beam 300 mm×450 mm with a span of 3 m, reinforced by 3−20 mm diameter rebar for tension, 2-20mm diameter rebar for compression is to carry a uniform dead load of 20kN/m and uniform live load of 10kN/m. Assuming fc′=21Mpa,fy=276Mpa, cc=40m, and stirups =10 mm,d′=58 mm, calculate the following: 1. Cracking Moment 2. Moment of Inertia Effective 3. Instantaneous deflection
The cracking moment of the cantilever beam is 109,319.79 Nm. The effective moment of inertia of the cantilever beam is 16,783,570.08 mm^4. The instantaneous deflection of the cantilever beam is 4.53 mm.
1. Cracking Moment:
The cracking moment is the moment at which the tensile stress in the bottom fibers of the beam reaches the allowable tensile strength of the concrete. To calculate the cracking moment, we need to determine the moment of inertia of the beam and the distance from the neutral axis to the extreme fiber in tension.
The moment of inertia (I) can be calculated using the formula:
I = (b × h^3) / 12
where b is the width of the beam (300 mm) and h is the height of the beam (450 mm).
I = (300 × 450^3) / 12 = 14,062,500 mm^4
The distance from the neutral axis to the extreme fiber in tension (c) can be calculated using the formula:
c = h / 2 = 450 / 2 = 225 mm
Now, we can calculate the cracking moment (Mc):
Mc = (0.5 × fctm × I) / c
where fctm is the mean tensile strength of the concrete.
Given that fc′ = 21 MPa, we can convert it to fctm using the formula:
fctm = 0.3 × fc′^(2/3)
fctm = 0.3 × 21^(2/3) = 3.13 MPa
Substituting the values into the cracking moment formula:
Mc = (0.5 × 3.13 × 14,062,500) / 225 = 109,319.79 Nm
Therefore, the cracking moment of the cantilever beam is 109,319.79 Nm.
2. Moment of Inertia Effective:
The effective moment of inertia (Ie) takes into account the presence of reinforcement in the beam. To calculate the effective moment of inertia, we need to consider the contribution of the reinforcement to the overall stiffness of the beam.
The effective moment of inertia can be calculated using the formula:
Ie = I + As × (d - d')^2
where As is the area of reinforcement, d is the distance from the extreme fiber to the centroid of the reinforcement, and d' is the distance from the extreme fiber to the centroid of the compressive reinforcement.
Given that we have 3-20 mm diameter rebar for tension, we can calculate the area of reinforcement (As) using the formula:
As = (π/4) × (20)^2 × 3 = 942.48 mm^2
The distance from the extreme fiber to the centroid of the reinforcement (d) can be calculated as half the height of the beam minus the cover to the reinforcement (cc) minus the diameter of the reinforcement (20 mm):
d = (h/2) - cc - (20/2)
d = (450/2) - 40 - 10 = 180 mm
The distance from the extreme fiber to the centroid of the compressive reinforcement (d') is given as 58 mm.
Now, we can substitute the values into the effective moment of inertia formula:
Ie = 14,062,500 + 942.48 × (180 - 58)^2 = 16,783,570.08 mm^4
Therefore, the effective moment of inertia of the cantilever beam is 16,783,570.08 mm^4.
3. Instantaneous Deflection:
To calculate the instantaneous deflection of the cantilever beam, we need to determine the bending stress caused by the combined effect of the dead load and live load.
The bending stress (σ) can be calculated using the formula:
σ = (M × c) / Ie
where M is the moment at a particular section, c is the distance from the neutral axis to the extreme fiber in tension, and Ie is the effective moment of inertia.
At the support, the moment (M) can be calculated as the sum of the dead load moment (Mdl) and the live load moment (Mll):
M = Mdl + Mll
Mdl = (dead load per unit length × span^2) / 8 = (20 × 3^2) / 8 = 22.5 kNm
Mll = (live load per unit length × span^2) / 8 = (10 × 3^2) / 8 = 11.25 kNm
M = 22.5 + 11.25 = 33.75 kNm
Substituting the values into the bending stress formula:
σ = (33.75 × 225) / 16,783,570.08 = 0.453 MPa
The instantaneous deflection (δ) can be calculated using the formula:
δ = (5 × σ × L^4) / (384 × E × Ie)
where L is the span of the beam and E is the modulus of elasticity of concrete.
Given that the modulus of elasticity of concrete (E) is approximately 21,000 MPa, we can substitute the values into the deflection formula:
δ = (5 × 0.453 × 3000^4) / (384 × 21,000 × 16,783,570.08) = 4.53 mm
Therefore, the instantaneous deflection of the cantilever beam is 4.53 mm.
Learn more about cracking moment :
https://brainly.com/question/33791894
#SPJ11
In a Cement Mortar mix or a Cement concrete mix, what type of admixtures can be used so that workability of mix increases and at the same time the strength properties are not decreased due to excessive water? Discuss how those admixtures work?
In a cement mortar mix or a cement concrete mix, plasticizers, water reducers, and superplasticizers can be used so that workability of the mix increases and at the same time the strength properties are not decreased due to excessive water.
These admixtures work in the following ways:
Plasticizers: These admixtures are organic substances that are used to reduce the water content in the mix without affecting the workability of the mix. Plasticizers are used in small quantities and reduce the surface tension of the water film, thus increasing the fluidity of the mix. Plasticizers also improve the cohesiveness of the mix and are ideal for use in mixes that require pumping. These admixtures improve the workability of the mix by reducing the friction between the particles of the mix.
Water reducers: These admixtures are inorganic substances that are used to reduce the amount of water required for a mix while maintaining the same workability. Water reducers work by reducing the surface tension of the water film, thus increasing the fluidity of the mix. Water reducers are used in larger quantities than plasticizers. These admixtures reduce the amount of water required for a mix, resulting in increased strength, improved durability, and decreased permeability.
Superplasticizers: These admixtures are organic substances that are used to improve the workability of a mix without increasing the water content. Superplasticizers are used in small quantities and are effective in increasing the fluidity of the mix. These admixtures are particularly useful in concrete mixes that require high strength and workability. Superplasticizers improve the workability of the mix by reducing the friction between the particles of the mix, resulting in a highly fluid mix with excellent finishing characteristics.
To know more about admixtures visit:
https://brainly.com/question/31715572
#SPJ11
Solve y′++36y=δ(t−3),y(0)=y′(0)=0 y(t)= for t<3 for t≥3
The solution to the differential equation is y(t) = 0, for t < 3
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex], for t ≥ 3
How to solve differential equationSolve the differential equation using Laplace transform.
Taking the Laplace transform of both sides of the equation
[tex]s^2 Y(s) + 36 Y(s) = e^{-3s}[/tex]
[tex]Y(s) = e^{-3s} / (s^2 + 36)[/tex]
Partial fraction decomposition of Y(s)
[tex]Y(s) = e^{-3s} / (s^2 + 36) = (1/6) * (1/(s+6)) - (1/6) * (1/(s-6)) * e^{-3s}[/tex]
Take the inverse Laplace transform
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}) * u(t-3)[/tex]
where u(t) is the unit step function.
For t < 3, the unit step function is 0
y(t) = 0.
For t ≥ 3, the unit step function is 1
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)})[/tex]
Therefore, the solution to the differential equation is
y(t) = 0, for t < 3
[tex]y(t) = (1/6) * (e^{-6(t-3)} - e^{6(t-3)}),[/tex] for t ≥ 3
Learn more on differential equation on https://brainly.com/question/28099315
#SPJ4