find the probability that a person rolling a die gets a) the first 2 on the third roll b) the first 2 on the fifth roll

The probability that at least 4 buyers would prefer green among the 16 selected is approximately 0.1031.

What is probability?

Probability is the study of the chances of occurrence of a result, which are obtained by the ratio between favorable cases and possible cases.

This problem can be modeled as a binomial distribution with n = 16 trials and p = 0.3 probability of success (preferring green).

Let X be the number of buyers who prefer green among the 16 selected. We need to find P(X ≥ 4).

Using a binomial probability table or calculator, we can find:

P(X ≥ 4) = 1 - P(X < 4)

= 1 - P(X ≤ 3)

= 1 - [P(X=0) + P(X=1) + P(X=2) + P(X=3)]

= 1 - [0.1233 + 0.2854 + 0.3028 + 0.1854]

= 0.1031 (rounded to 4 decimal places)

Therefore, the probability that at least 4 buyers would prefer green among the 16 selected is approximately 0.1031.

To know more about probability visit :

https://brainly.com/question/13604758

#SPJ1

According to the World Air Quality Report 2020, the annual average PM2.5 concentration in Singapore was 14.8 μg/m³ (micrograms per cubic meter which can be expressed in scientific notation as 1.48 x 10^-5 g/m³.

The PM2.5 concentration refers to fine particulate matter that can pose health risks when inhaled, and sources of such pollution in urban areas can include traffic, industrial activities, and power generation.

Despite its relatively low PM2.5 concentration compared to many other cities in the world, Singapore continues to work on improving air quality and reducing pollution through measures such as promoting the use of public transportation, implementing emission standards for vehicles, and encouraging the adoption of clean energy technologies.

Read more about City pollution

brainly.com/question/19621497

#SPJ1

Answer:

Step-by-step explanation:

Let's use algebra to solve this problem.

Let's start by assigning variables to the unknown quantities. Let G be the initial number of green beads and Y be the initial number of yellow beads.

We know that the number of green beads is 1/3 the number of yellow beads:

G = (1/3)Y

After giving away some beads, he had 42 green beads and 270 yellow beads left. So we can set up two equations using this information:

G - 2f = 42

Y - 3f = 270

where f is the number of friends he gave the beads to.

Now we can substitute G = (1/3)Y into the first equation:

(1/3)Y - 2f = 42

Multiplying both sides by 3, we get:

Y - 6f = 126

Now we have two equations that we can solve simultaneously:

Y - 3f = 270

Y - 6f = 126

Subtracting the first equation from the second, we get:

3f = 144

So f = 48. He gave the beads to 48 friends.

To find the total number of beads he had at first, we can use the equation G = (1/3)Y:

G + Y = (4/3)Y = (4/3)(270) = 360

So he had a total of 360 beads at first.

We can see here that the figures that have the same area are: A. Figures I and II.

Area is a measure of the size of a two-dimensional surface or shape. It refers to the amount of space inside the boundaries of a flat object, such as a rectangle, triangle, or circle. Area is typically measured in square units, such as square meters, square feet, or square centimeters.

The area of Figure I which is a rectangle is = l × b = 2cm × 5.8cm = 11.6cm².

The area of Figure II which is a parallelogram is = b × h = 4cm × 2.9cm = 11.6cm².

Thus, Figures I and II have the same area.

Learn more about area on https://brainly.com/question/25292087

#SPJ1

Answer:

(x+6)(x+6)

[tex]x^2+12x+36[/tex]

(x+8)(x-5)

[tex]x^{2}+3x-40\\[/tex]

(x-5)(x-2)

[tex]x^{2}-7x+10[/tex]

Step-by-step explanation:

Brainliest pls hope it helped^^

Answer:

a) x^(2)+12x+36

b) x^(2)+3x-40

c) x^(2)-7x+10

Step-by-step explanation:

The mean of the data set of the people at a birthday party would be 11. The mean absolute deviation would be 5.25

The mean absolute deviation might not be good to use for variation here because there is an outlier of 32.

To find the mean and the mean absolute deviation (MAD) for this data set, we first need to find the mean age.

Mean = (Sum of ages) / (Number of people)

Mean = (7 + 7 + 7 + 8 + 8 + 9 + 10 + 32) / 8

Mean = 88 / 8 = 11

The MAD is the average of the absolute differences between each data point and the mean.

Find the sum of the absolute differences:

4 + 4 + 4 + 3 + 3 + 2 + 1 + 21 = 42

Divide the sum of the absolute differences by the number of data points (8) to get the MAD:

MAD = 42 / 8 = 5.25

The MAD might not be a good measure of the variation in this data set because there is an outlier (32) in the data. The presence of an outlier can significantly impact the MAD, making it seem like there is more variation in the data than there actually is.

Find out more on mean absolute difference at https://brainly.com/question/447169

#SPJ1

Answer: b

Step-by-step explanation:

u just add them together

Answer:

They're not promise

Step-by-step explanation:

I did it on the calculator

I hope this helps youuu

Have a good day <3

Answer:

[tex]x\leq -2[/tex]

Step-by-step explanation:

Solve for x:

[tex]-4x+20\geq 28[/tex]

Subtract 20 on both sides

[tex]-4x\geq 8[/tex]

Flip the sign and multiply both sides by -4

[tex]16x\leq -32[/tex]

Divide by 16

[tex]x\leq -2[/tex]

The probability that exactly 7 employees out of 23 sent complete the program is 0.217 or 21.7%.

In this case, the number of trials is 23, and the probability of success is 0.4 (since, on average, 40% of those sent complete the program). We want to find the probability of exactly 7 successes.

The binomial probability formula is:

P(X=k) = [tex](^n_k) \times p^k \times (1-p)^{(n-k)}[/tex]

Where P(X=k) is the probability of k successes, n is the total number of trials, p is the probability of success, and (n choose k) is the binomial coefficient, which represents the number of ways to choose k successes from n trials.

Using this formula, we can calculate the probability of exactly 7 employees completing the program as follows:

P(X=7) = [tex](^{23} _7) \times 0.4^7 \times (1-0.4)^{(23-7)}[/tex]

= 0.217 or 21.7%

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

Answer:

Step-by-step explanation:

250

Based on the market research, Dina can determine which ice cream flavor she should put on sale this week by comparing the number of people who would purchase each flavor if it was on sale.

For example, if 70 people said they would purchase chocolate ice cream if it was on sale and only 30 people said they would purchase vanilla ice cream if it was on sale, then Dina should put chocolate ice cream on sale this week.

On the other hand, if 60 people said they would purchase vanilla ice cream if it was on sale and only 40 people said they would purchase chocolate ice cream if it was on sale, then Dina should put vanilla ice cream on sale this week.

It's important to note that Dina's market research only represents a sample of people who walk by her ice cream shop and stop in. It may not be representative of the entire population of potential customers. Therefore, Dina should take this into account when making her decision.

Read more about market research here:

https://brainly.com/question/24906199

#SPJ1

Answer:

Proofs attached to answer

Step-by-step explanation:

Proofs attached to answer... I think

answer for number 14 is 1115

you mutliply 27 into 1 ×45 into 100

it is 100 because we are dealing with percentage

so you say (write in fraction form)

27÷1×45÷100

=1215÷100

you get the answer of 1115

so there were 1115 female butterflies

we can subtract the answer from the original number to get the number of male butterflies

1215-1115 =100 male butterflies

As per the combination method, there are 495 groups of 4 people that can answer the 4 different phone lines when there are 12 people in the office.

To start, we need to determine how many ways we can choose 4 people from a group of 12. We use the formula for combinations, which is:

ⁿCₓ = n! / x!(n-x)!

Where n is the total number of people (in this case, 12) and x is the number of people we want to choose (in this case, 4). The exclamation point symbol (!) denotes the factorial operation, which means we multiply the number by every positive integer less than it down to 1.

So, for this problem, we have:

¹²C₄ = 12! / 4!(12-4)!

= (12 x 11 x 10 x 9) / (4 x 3 x 2 x 1)

= 495

To know more about combination here

https://brainly.com/question/28998705

#SPJ4

Answer:

Step-by-step explanation:

First, we need to make sure that we are comparing the units in the same system, either yards or feet. Let's convert 32 feet to yards:

32 feet * 1 yard/3 feet = 10.67 yards

Now we have:

Lighthouse height / Lighthouse shadow = Billboard height / Billboard shadow

Let x be the height of the lighthouse in yards.

x / 72 yards = 10.67 yards / 19 feet

We can simplify the equation by converting everything to yards:

x / 72 = 10.67 / 3.28

x / 72 = 3.25

To solve for x, we can cross-multiply:

x = 72 * 3.25

x = 234

Therefore, the height of the lighthouse is 234 yards.

Answer: A) 121.3 yd.

Answer:

3a + 2b

Step-by-step explanation:

The perimeter of the rectangle is calculated by following formula:

2×(w+l)

Let x represent the missing side length, width,

2(x + 5a - b) = 16a + 2b

2x + 10a - 2b = 16a + 2b

2x = 16a + 2b - 10a + 2b

2x = 6a + 4b

x = 3a + 2b

The correct option is the second one, your supervisor did not divide by the total number of bags.

Here we can see a table with the size of each bag (in grams) and the number of sold bags.

Now, remember that for a set of N numbers {x₁, ..., xₙ} the mean is:

M = (x₁ + x₂ + ...)/N

So the denominator is the amount of elements in the set.

Then here in the denominator we should see the total number of bags sold, which is:

25 + 32 + 40 + 18 = 115

That number should be in the denominator instead of the sum of the masses.

Then the correct option is the second one.

Learn more about means at:

https://brainly.com/question/20118982

#SPJ1

An expression for the length of one rectangle is the product of the ratio of the similar rectangle to the length of the original rectangle. The length of a similar rectangle is expressed as the same ratio.

The ratio of the length of the similar rectangle to the length of the original rectangle and the length of the original rectangle are used to calculate the length of a similar rectangle. For instance, if the original rectangle's length is 10 and the similar rectangle's length is 20, the length of the similar rectangle may be expressed as (20/10) × 10 = 20.

The comparable lengths of identical forms have the same ratio. It is possible to compute lengths using this fact. For instance, the corresponding sides of two rectangles are proportionate if they are identical.

The ratio of the lengths is 11/l2 if one rectangle has length 11 and the second rectangle has length 12. The ratio of the widths is the same if one rectangle has width w1 and the other has width w2, which is w1/w2.

To know more about similar rectangles, refer:

https://brainly.com/question/27156036

#SPJ4

Correct question is:

An expression for the length of one rectangle is _____. The length of a similar rectangle is expressed as _____.

In 1970, an industrial waste site contained an estimated 350 tons of contaminated soil. special cleaning crews were contracted to clean up the site. the crews can remove 20% of the contaminated soil each year. describes an exponential function because it follows a fixed rate of decay over time, which can be expressed as a mathematical formula.

The given data describes an exponential function because it describes a quantity that decreases at a fixed rate over time.

The 350 tons of contaminated soil represents the initial quantity, and the special cleaning crews removing 20% of the contaminated soil each year represents the rate of decay. This decay rate can be expressed as a percentage decrease, which describes an exponential function.
To be more specific, an exponential function is a mathematical model that describes the decay of a quantity over a period of time. The decay rate can be expressed as a constant, which is multiplied by the initial quantity. The resulting value represents the quantity of the item at the end of each time period.
For example, in the given situation, the initial quantity of contaminated soil is 350 tons.

After one year, the quantity decreases by 20%, or 0.2, to represent the amount of contaminated soil removed.

This can be expressed as a mathematical formula as follows:

Q1 = 350 x 0.2

where Q1 is the quantity after the first year.

For similar question on exponential function

https://brainly.com/question/2456547

#SPJ11

The perimeter of the given regular octagon is 8 units.

What is the perimeter of a regular polygon?

The perimeter of a regular polygon is the total length of its sides, and for a regular octagon, it is given by the formula [tex]P = 8s[/tex] , where s is the value of each side. To find the length of each side, we can use the coordinates of two adjacent vertices of the octagon.

Calculating the value of the perimeter :

In this question, we are given that the octagon is regular and that segment LS is located at L (0,0) and S (0,1).

To find the perimeter of the octagon, we can use the formula [tex]P = 8s,[/tex], where s is the value of each side.

We can find the length of each side by using the coordinates of two adjacent vertices of the octagon. Let us consider the coordinates of vertices L and M. The distance between L and M can be calculated using the distance formula as follows:

[tex]d =\sqrt{((x_2 - x_1)^2 + (y_2 - y_1)^2)}[/tex]

where [tex](x_1, y_1) = (0, 0)[/tex]and [tex](x_2, y_2) = (1, 0)[/tex]

[tex]d = \sqrt{((1 - 0)^2 + (0 - 0)^2)}= 1[/tex]

Therefore, the length of each side of the octagon is 1 unit.

Substituting s = 1 unit in the formula for the perimeter of the octagon, we get:

[tex]P = 8s = 8(1) = 8[/tex] units

Hence, the perimeter of the given regular octagon is 8 units.

To know more about octagon visit :

brainly.com/question/16543440

#SPJ1

Therefore, sin(A) is approximately 0.6708 (rounded to four decimal places).

Trigonometry is a branch of mathematics that deals with the relationships between the sides and angles of triangles. It is used to solve problems related to geometry, physics, engineering, and many other fields. Trigonometry is based on the study of the six trigonometric functions: sine (sin), cosine (cos), tangent (tan), cosecant (csc), secant (sec), and cotangent (cot). These functions describe the ratios of the lengths of the sides of a right triangle, and can be used to calculate the unknown side lengths or angles of a triangle. Trigonometry is also useful for working with periodic functions, such as waves and oscillations. The trigonometric functions can be used to model and analyze these periodic phenomena, and to predict future behavior based on past observations. Applications of trigonometry can be found in many areas of science, engineering, and technology, including astronomy, navigation, architecture, surveying, and electronics.

Here,

To find sin(A), we need to use the trigonometric ratios of the sides of the right triangle ABC, where angle A is opposite to side a, angle B is opposite to side b and angle C is opposite to side c. We have sides of the triangle as follows:

a = 72

b = 65

c = 97

To find sin(A), we can use the following formula:

sin(A) = opposite/hypotenuse

In this case, the opposite side of angle A is b and the hypotenuse is c, so we have:

sin(A) = b/c

sin(A) = 65/97

To know more about trigonometry,

https://brainly.com/question/29002217

#SPJ1

Complete question:

Find sin(A) when we have sides of the triangle as follows:

a = 72

b = 65

c = 97

MLE of the mean  = -71.29.

To find the maximum likelihood estimator (MLE) for the mean of the given samples assuming a what if you assume that the scale is 500? does this seem reasonable? with scale 1, you need to calculate the sample mean, which is the average of all the samples.

This can be calculated by taking the sum of all the values divided by the number of samples. In this case,

the sum of all the samples is -499 and the number of samples is 7, so the sample mean is -499/7 = -71.29.

If you assume the scale is 500, the MLE of the mean will remain the same. However, it does not necessarily make sense to assume a Laplacian distribution with scale 500 since Laplacian distributions usually have a scale parameter between 0 and 1.

Learn more about maximum likelihood estimator

brainly.com/question/30331594

#SPJ11

The standard deviation of the number of claims filed, in this case, is equal to 1.732. This is an important metric for the actuary, as it provides an indication of how much variation there is in the number of claims filed.

The standard deviation of the number of claims filed is equal to the square root of the mean. In this case, the mean is equal to three. Thus, the standard deviation of the number of claims filed is equal to the square root of three, which is equal to 1.732.

To explain further, the Poisson distribution is a discrete probability distribution that is used to calculate the probability of a certain number of events occurring within a given time interval. It is based on the assumption that these events occur independently and at a constant rate. In this case, the rate is equal to the mean, which is equal to three. Thus, the standard deviation is equal to the square root of the mean.

The standard deviation of the number of claims filed is an important metric for the actuary, as it provides an indication of how much variation there is in the number of claims filed. The larger the standard deviation, the greater the amount of variation, and vice versa. In this case, the standard deviation is relatively low, which suggests that the number of claims filed is relatively consistent.

In conclusion, the standard deviation of the number of claims filed, in this case, is equal to 1.732. This is an important metric for the actuary, as it provides an indication of how much variation there is in the number of claims filed.

See more about Poisson distribution at: https://brainly.com/question/4484439

#SPJ11

4% of a number is therefore 10, or 10 by Divide both sides of the equation by 0.16 and to determine the fourth percent of the number.

Typically, an equation consists of one or more variables, which might have varying values and are typically represented by letters. Equations are frequently used to explain relationships between distinct values or to address issues in a variety of fields. An example of an equation with one variable is x + 2 = 5. It denotes that x plus 2 add up to 5 in total.

given

With the provided data, we can first determine the complete number:

If 40 is 16% of a number, then the following equation may be written:

0.16x = 40

where x is the complete number that we are looking for.

Divide both sides of the equation by 0.16 to find the value of x:

x = 40/0.16

x = 250

Hence, the total is 250.

We can now utilise this knowledge to determine the fourth percent of the number:

4% of 250 is:

0.04 × 250 = 10

4% of a number is therefore 10, or 10 by Divide both sides of the equation by 0.16 and to determine the fourth percent of the number.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

If Rachana randomly selects two mugs from the set, the probability that she gets two different mugs is 0.1556 or 15.56%.

To solve this problem, we can use the concept of combinations. Since there are 10 mugs in the set, there are 10 choose 2 = 45 ways to select two mugs without considering order.

Out of these 45 ways, we need to count the number of ways Rachana can select two different mugs. Since there are 3 different types of mugs, Rachana can choose any one of the three types for the first mug. There are 10 mugs in the set, out of which 3 belong to the chosen type. Therefore, the probability of choosing a mug of the chosen type is 3/10.

For the second mug, Rachana can choose from the remaining 9 mugs. Since she needs to choose a different type of mug, she can choose any one of the 2 remaining types. There are 7 mugs left from the other 2 types. Therefore, the probability of choosing a mug of a different type is (7/9) * 2/3 = 14/27.

Therefore, the probability of selecting two different mugs is the product of the probabilities of selecting a mug of the chosen type and a mug of a different type. This is given by (3/10) * (14/27) = 7/45, which is approximately 0.1556 or 15.56%.

To learn more about probability click on,

https://brainly.com/question/25905476

#SPJ4

Complete question is:

Rachana has a set of ten mugs the set up is made of 3 different mugs. If Rachana randomly selects two mugs from the set, what is the probability that she gets two different mugs?

Answer:

measure of angle MPQ is 125

Step-by-step explanation:

1) Corresponding angles are congruent

5x=3x+50

2x=50

x=25

2) Substitute back into the equation

3(25)+50 = 125

I have no idea, good luck though pal

Step-by-step explanation:

You

Got

This

<3

The point that partitions segment AB in a 1:4 ratio is (-1, -0.4).

In this scenario, line ratio would be used to determine the coordinates of the point Q on the directed line segment AB that partitions the segment into a ratio of 1 to 4.

In Mathematics, line ratio can be used to determine the coordinates of Q and this is modeled by the following mathematical expression:

Q(x, y) = [(mx₂ + nx₁)/(m + n)],  [(my₂ + ny₁)/(m + n)]

Substituting the given parameters into the line ratio formula, we have;

Q(x, y) = [(1(7) + 4(-3))/(1 + 4)],  [(1(-10) + 4(2))/(1 + 4)]

Q(x, y) = [(7 - 12)/(5)],  [(-10 + 8)/5]

Q(x, y) = [-5/5],  [(-2)/(5)]

Q(x, y) = [-1, -2/5]

Q(x, y) = [-1, -0.4]

Read more on line ratio here: brainly.com/question/14457392

#SPJ1