Answer:
Electricity is the flow of electrons, because electrons pass from atom to atom.
The steepest street in the world is Baldwin Street in Dunedin, NZ. It is inclined at an angle of 380 , with the horizontal. A child slides down the street with a constant velocity on a sled with high friction runners. What is the coefficient of friction between the sled runners and the street?
Newton's second law allows to find the result for the friction coefficient of the street is:
The friction coeficinwete is: μ = 0.78
Newton's second law establishes a relationship between the net force, the mass and the acceleration of the body.
∑ F = m a
Where bold indicates vectors, m is to mass and acceleration.
In the attached we see a free body diagram, it is a diagram of the forces without the details of the body, the x-axis is parallel to plane also shown with the positive in the direction of movement, going down the plane and the y-axis perpendicular to the plane.
Let's use trigonometry to break down the weight.
Sin θ = [tex]\frac{W_x}{W}[/tex]
cos θ = [tex]\frac{W_y}{W}[/tex] / W
Wₓ = W sin θ
[tex]W_y[/tex] = W cos θ
We write Newton's second law for each axis.
y-axis
N- [tex]W_y[/tex] = 0
N = mg cos θ
x-axis
Wₓ - fr = ma
Since they indicate that the body goes down at a constant speed, the acceleration is zero.
W sin θ = fr
The friction force is the macroscopic representation of the interactions between the two surfaces and the formula.
fr = μ N
we substitute.
fr = μ mg cos θ
mg sin θ = μ cos θ
μ = tan θ
Let's calculate.
μ = tan 38.0
μ = 0.78
In conclusion using Newton's second law we can find the results for the friction coefficient of the street is:
The frivtion coefficient is: μ = 0.78
Learn more about the coefficient of friction here: brainly.com/question/11808898
if a car travels 90km/h for 15 minutes it will travel a. bc x 10^d what are the values of a, b, c and d
Hope it helps.
Do comment if you have any query.
Look at the diagram shown below. The reading on ammeter 1 is 0.15 A. What will the reading on ammeter 2 be
There's no way to tell, without knowing the resistance of either X-1 or X-2, or the reading on A3.
Which of the following are equivalent to 1 Newton?
Answer:
1 kilogram meter per second squared?
. The gas in a piston (defined as the system) warms and absorbs 655 J of heat. The expansion performs 344 J of work on the surroundings. What is the change in internal energy for the system
The change in the internal energy for the system is 311 J
The change in internal energy for the system will be the difference between the heat absorbed and the work expansion from the surroundings.
i.e.
ΔU = Q + W
where;
internal energy = Uheat absorbed = Qworkdone on surroundings = -WΔU = ( 655 J + ( - 344 J) )
ΔU = 311 J
Learn more about change in internal energy for the system here:
https://brainly.com/question/20920764?referrer=searchResults
Rope A is tied to block 1, and rope B is attached to both block 1 and block 2 as shown in the diagram. Block 1 has a mass of 4.2 kg and block 2 has a mass of 2.6 kg. You lift both blocks straight up. Calculate the magnitude of tension in each of the ropes when the blocks
Move at constant velocity of 1.5 m/s [up]
Find the magnitude of tension in each rope when the blocks are accelerating at 1.2 m/s^2 [up].
The maximum tension the strings can withstand is 90. N. Knowing this, determine the maximum acceleration of the blocks that would not break the rope.
Hi there!
Part 1:
If the blocks are moving at a constant velocity:
∑F = 0
Begin by summing the forces acting on each block. Let the upward direction be positive.
∑F₁ = Ta - M₁g - Tb
∑F₂ = Tb - M₂g
Sum the forces:
∑F = Ta - M₁g - Tb + Tb - M₂g
∑F = Ta - M₁g - M₂g = 0
Solve for Tension A:
Ta = M₁g + M₂g (Let g = 9.8 m/s²)
Ta = 4.2(9.8) + 2.6(9.8) = 66.64 N
Now, solve for tension B using the summation of ∑F₁:
0 = Tb - M₂g
Tb = (2.6* 9.8) = 25.48 N
Part 2:
We can use the same method, but incorporate the acceleration:
∑F = Ta - M₁g - M₂g
(M₁ + M₂)a = Ta - M₁g - M₂g
(M₁ + M₂)a + M₁g + M₂g = Ta
(4.2 + 2.6)(1.2) + 4.2(9.8) + 2.6(9.8) = 74.8 N
∑F₂ = Tb - M₂g
M₂a + M₂g = Tb = 28.6 N
Part 3:
Since the top string experiences most of the tension, we can use its equation to calculate the maximum acceleration:
∑F = Ta - M₁g - M₂g
(M₁ + M₂)a = Ta - M₁g - M₂g
a = (90 - M₁g - M₂g)/(M₁ + M₂)
a = 3.435 m/s²
what is light ....
Drop some thanks..
Answer:
Light is a form of a energy which a human eye makes the things visible
Explanation:
I hope it's help u
how many gallons of gasoline are consumed in the us daily?
The metal hammer has a mass of 1500 kg and it hits the baseplate
with a speed of 8.0 m/s.
0 Calculate the kinetic energy of the hammer as it hits the baseplate.
Answer:
2300.68
Explanation:
The metal hammer has a mass of 1500 kg and it hits the baseplate
with a speed of 8.0 m/s.
0 Calculate the kinetic energy of the hammer as it hits the baseplate. there for it will create the kinetic energy of 2300.68 as it hits the baseplate.
A student wants to show the transfer of heat energy without matter. Which investigation design would best help the student
Answer:
C
Explanation:
Answer:
C) an investigation of conduction through collisions between particles in space
Please help, and give an explanation on what you did. Thanks a lot :]
Answer:
3.0 m
Explanation:
The height of the wave is just 1.5 m + 1.5 m which equals 3.0 m
A box of mass 20 kg has a base of area 4 m2
. Calculate the pressure exerted by it on the ground. (Use 1
kg-f = 10 N)
[tex]\huge \bf༆ Answer ༄[/tex]
First, find the force exerted by the box.
[tex] \sf \: F = ma [/tex]
The required terms are :
m = mass = 20 kga = Acceleration due to gravity = 10 m/s²Calculate the force : -
[tex] \sf \: F = 20 \times 10 [/tex][tex] \sf \: F = 200 \: N[/tex]_____________________________________
Pressure can be calculated using this formula : -
[tex] \sf \: P = \dfrac {F }{A }[/tex]The stated terms are :
P = pressure F = force = 200 NA = Area = 4 m²Calculate the Pressure now : -
[tex] \sf \: P = \dfrac{200}{4} [/tex][tex] \sf \: P = 50 \: pascals[/tex][tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]
Path:p
How much zinc oxide 10% cream and zinc oxide 1% cream are needed to make 454 g of zinc oxide 3% cream?
Round your answer to the nearest tenth of a gram.
Paragraph
B
1
=
N
Answer:
.1 A1 = a1 A1 is amount at .1 %
.01 A2 = a2 A2 is the amount at .01%
a1 + a2 = 454 total of a1 and a2
A = 454 / .03 = 15133.33 tot amount needed
454 = .1 A1 + .01 A2
A2 = 15133.33 - A1
454 = .1 A1 + .01 (15133.33 - A1)
454 = .09 A1 + 151.33
A1 = 302.67 / .09 = 3363
A2 = 15133.3 - 3363 = 11770.3
Check:
.1 * A1 = 336.3
.01 * A2 = 117.7
total = 336.3 + 117.7 = 454
What mass M will cause this system accelerate e 0.75 m/s²?
Answer:
5.54 [kg].
Explanation:
1) if m₁=6; g=9.81; a=0.75 and m₂ - reqired mass, then
2) it is possible to write: m₁*a=m₁*g-m₂*g, and
3) [tex]m_2=\frac{m_1(g-a)}{g}; \ => \ m_2=\frac{6*(9.81-0.75)}{9.81}=5.54[kg].[/tex]
Question 2
You can make the puck travel in complex ways by placing a set of charges around on the field. So, here’s your game challenge:
Arrange sources charge around to propel the puck from its starting position into the goal. That’s pretty easy for a straight shot; you just put a negative charge behind the goal. But what if there are barriers along the way? This is a real test of your physical understanding, including Newton’s laws of motion and electrostatic forces. Game’s on!
Part A
On the control bar, check the Trace and Field boxes. The game has three Difficulty levels. Start with Difficulty level one and arrange source charges to get the puck into the goal. Once you’ve made a score at any level, increase the Difficulty level. Take a screen capture of two of your most difficult goals and paste them here. At least one of these should be at Difficulty level 2 or 3.
Answer:
A. The electric field lines point outward and the black puck moves backwards. From this I can see that I can't put the red charge in front of the black puck because it will go away from the goal.
B. The electric field lines point inward and the black puck moves forwards and backwards. The conclusion I made from this was the blue charge by itself will not be able to get into the goal.
C.The puck moves faster when the mass increases and moves slower when the mass decreases. The more mass, the more force that is applied to the puck.
D. The relationship between the speed of the black puck and its distance from the blue charge is when the puck is further away from the blue charge, the slower the puck moves away from it.
Explanation:
Brainlest if this helped!
waht is pascal law?
Answer:
P=\frac{F}{A}
P = pressure
{F} = force
{A} = area
Explanation:
what will be the effect on gravitational pull between two objects of medium between them is changed
Answer:
force of gravitational attraction between them also decreases.
Explanation:
force of gravitational attraction between them also decreases.
What do scientists call a substance that contains atoms from two or more different elements that are chemically bonded?
Atom
Compound
Element
Molecule
With an average velocity of 8.3 m/s, what is the displacement (including its sign) of a sled during a straight run of 12 s?
Answer:
this question makes no sense with out a reference point or direction.
Suppose measure the mass of an orange. Then you peel the orange and separate out the slices. If you measure the orange peel and all the slices, will that mass equal the mass of the whole orange?
Answer:
Yes
Explanation:
It's still the same orange with the same amount of stuff.
what animal that does not eat meat
Answer:
An animal that doesn’t eat meat is called a herbivore. An few examples would be cows, rabbits, horses, and goats.
:)
A car approaches you at 50 km/h. A fly inside the car is flying toward the back of the car at 7 km/h. From your point of view by the side of the road, the fly is moving at ______________km/h. Group of answer choices 57
Answer:
43 km/h
Explanation:
If the car is going past you at 50 km/h, then all the objects inside appear to be going 50 km/h. The fly is flying 7km/h in the opposite direction, and would appear to be going 7 km/h slower. Therefore, as 50 - 7 is 43, the fly would appear to be going 43 km/h. Hope this helps :D
To measure the current through and the voltage across a resistor in a circuit, you should place the ammeter in _____ with the resistor and the voltmeter in _____ with the resistor.
Answer:
ammeter: seriesvoltmeter: parallelExplanation:
The current is the same through components connected in series. If you want to measure the current in a component, the ammeter must be placed in series.
__
The voltage is the same at the terminals of components connected in parallel. If you want to measure the voltage across a component, the voltmeter must be connected across the component, that is, in parallel with it.
[tex]\huge \mathbb \pink{ANSWER:}[/tex]
To measure the current through and the voltage across a resistor in a circuit, you should place the ammeter in series with the resistor and the voltmeter in parallel with the resistor.
#CarryOnLearning
Explain the relationship between the frequency, energy, and wavelength of a wave.
Answer:
Explanation:
The energy equation is E=hv
1 point
What is the potential energy of a 12543 kg tank this on the ground? (only
put the number, no units or commas) *
Answer:
PE=0
Explanation:
If the tank is on the ground, there is 0 height which means the equation of PE=mh will be PE=12543(0)=0, hope this helps!
The trachea splits into two branches called larynx true or false
pls answer somebodyyyyyyy
Answer:
False
Explanation:
The trachea divides into left and right air tubes called bronchi, which connect to the lungs. Within the lungs, the bronchi branch into smaller bronchi and even smaller tubes called bronchioles.
Hope this helps :)
When positive charges build up in an object, the net charge of that object becomes...
a. it stays the same
b. negative
c. positive
d. neutral
Answer:
c. postive
Explanation:
All physical objects are made up of atoms. Inside an atom are protons, electrons and neutrons. The protons are positively charged, the electrons are negatively charged, and the neutrons are neutral.
Therefore, all things are made up of charges. Opposite charges attract each other (negative to positive). Like charges repel each other (positive to positive or negative to negative). Most of the time positive and negative charges are balanced in an object, which makes that object neutral.
Static electricity is the result of an imbalance between negative and positive charges in an object. These charges can build up on the surface of an object until they find a way to be released or discharged. One way to discharge them is through a circuit.
Hope this helps, have a nice day/night! :D
Answer:
C
Explanation:
C because if you build anything up it remains the same.
During cellular respiration, cells absorb what ?and use it to release energy from food
Answer:
Cellular respiration is the process in which cells break down glucose, release the stored energy, and use the energy to make ATP.
Explanation:
what is the purpose of delivering medical aid through drones
Determine the kinetic energy of a 1500 kg roller coaster car that is moving with a speed of 35.0 m/s.
Answer:
kinetic energy equation is 85,714.2857 kg.
Explanation: