cola has a ph of about 3.0. if a cola has a concentration of h2co3 of 0.005m, what is the concentration of hco- g

0.1503 grams is the approximate mass of the CCl4 sample.

We can use Avogadro's number to solve this problem:

1 mole of any substance contains 6.02 x 10^23 particles

Therefore, the number of moles of CCl4 in the sample is:

5.90 x 10^20 particles / 6.02 x 10^23 particles per mole = 0.000978 moles

The molar mass of CCl4 is approximately 153.82 g/mol. Therefore, the mass of the sample is:

0.000978 moles * 153.82 g/mol = 0.1503 g

Therefore, the mass of the sample of CCl4 with 5.90 x 10^20 particles is approximately 0.1503 grams.

Learn more on Avogadros number here: https://brainly.com/question/14876640

#SPJ1

To compare the 0.5 M sucrose solution and the 90.5 M glucose solution, we need to consider their concentrations, which are measured in moles per liter (M).

For the 0.5 M sucrose solution, we know that it contains 0.5 moles of sucrose per liter of solution. The molecular mass of sucrose is 342 g/mol, so we can calculate the mass of sucrose in one liter of solution as follows:

0.5 moles/L × 342 g/mol = 171 g/L

Therefore, the 0.5 M sucrose solution contains 171 g of sucrose per liter of solution.

For the 90.5 M glucose solution, we know that it contains 90.5 moles of glucose per liter of solution. The molecular mass of glucose is 180 g/mol, so we can calculate the mass of glucose in one liter of solution as follows:

90.5 moles/L × 180 g/mol = 16,290 g/L

Therefore, the 90.5 M glucose solution contains 16,290 g of glucose per liter of solution.

From these calculations, we can see that the 90.5 M glucose solution is much more concentrated than the 0.5 M sucrose solution. However, the two solutions cannot be directly compared in terms of their effects on biological systems or their properties, as the properties of a solution depend on many factors such as solubility, osmotic pressure, and chemical interactions with other molecules.

To know more about molecular mass here

https://brainly.com/question/3182776

#SPJ4

The volume of stomach acid containing 0.00025 g of HCl is 6.85 µL.

This is calculated by dividing 0.00025 g by the concentration of HCl (0.10 M).

The concentration of stomach acid, HCl = 0.10 M

The mass of HCl = 0.00025 g

To find: Volume of stomach acid contains 0.00025 g of HCl.

Solution: We know,

Molarity (M) = (moles of solute) / (volume of solution in liters)

The molar mass of HCl = (1 × atomic mass of H) + (1 × atomic mass of Cl)= (1 × 1.01) + (1 × 35.5)= 36.51 g/mol

Given, Molarity (M) = 0.10 M

From the Molarity formula, we can detect

Number of moles of HCl = Molarity (M) × volume (V)

moles of HCl = 0.00025 g / 36.51 g/mol = 0.10 M × V

0.10 V = (0.00025 / 36.51) g / mol

V = (0.00025 / 36.51) g / (0.10 mol/L)

V = 6.85 × 10^-6 L = 6.85 µL

Thus, the volume of stomach acid that contains 0.00025 g of HCl is 6.85 µL.

To know more about Molarity calculations, refer here:

https://brainly.com/question/11348490#

#SPJ11

0.81 moles of O2 would be produced if 1.62 moles of H2O2 were to undergo decomposition

The balanced chemical equation for the decomposition of hydrogen peroxide (H2O2) is:

2 H2O2 → 2 H2O + O2

This means that for every 2 moles of hydrogen peroxide, 1 mole of oxygen gas is produced. So to calculate the number of moles of O2 produced when 1.62 moles of H2O2 decompose, we need to use a proportion:

2 mol H2O2 : 1 mol O2 = 1.62 mol H2O2 : x mol O2

where "x" is the number of moles of O2 produced.

To solve for "x", we can cross-multiply and simplify:

2 mol H2O2 * x mol O2 = 1 mol O2 * 1.62 mol H2O2

2x = 1.62

x = 0.81

Therefore, 0.81 moles of O2 would be produced if 1.62 moles of H2O2 were to undergo decomposition.

To know more about moles click here:

brainly.com/question/26416088

#SPJ4

The metal hydride reducing agent used in this experiment is sodium borohydride (NaBH₄).

If catalytic hydrogenation with H2 were used, the product would be an alkane with a double bond reduced to a single bond.

Sodium borohydride (NaBH₄) is a strong reducing agent capable of reducing aldehydes and ketones to their corresponding alcohols. It works by donating protons to the carbon-oxygen double bond, leading to the formation of an alkoxide intermediate.

The alkoxide is then reduced to the corresponding alcohol by hydrogen transfer from the hydride ion. Catalytic hydrogenation with H₂ will reduce the double bond to a single bond, producing an alkane product.

This process is used to produce a range of organic products in the laboratory, and is a very useful tool in organic synthesis.

To know more about reducing agent  click on below link:

https://brainly.com/question/2890416#

#SPJ11

The layers of the sun can be seen in the image attached.

The sun is composed of several layers, including:

Core: The innermost layer of the sun where nuclear fusion takes place. The temperature in the core is about 15 million degrees Celsius.

Radiative Zone: This layer is between the core and the convection zone. Energy produced in the core is transported through the radiative zone by photons.

Convection Zone: The outermost layer of the sun's interior where hot gas rises and cooler gas sinks. The energy produced in the core is carried to the surface by convection.

Photosphere: The visible surface of the sun where most of the sun's light is emitted. The temperature of the photosphere is around 5,500 degrees Celsius.

Chromosphere: A thin layer above the photosphere that emits a reddish glow during solar eclipses. The temperature of the chromosphere ranges from 4,000 to 10,000 degrees Celsius.

Corona: The outermost layer of the sun's atmosphere, extending millions of kilometers into space. The temperature of the corona is extremely high, around 1 to 3 million degrees Celsius.

Learn more about the sun:https://brainly.com/question/17376727

#SPJ1

The type of geometry that acetone (CH2O), in which three bonding pairs of electrons are arrayed around the central atom, have is trigonal planar.

The molecular geometry of acetone is a trigonal planar. In acetone, there are three bonding pairs of electrons that are arranged around the central atom, which gives the molecule a trigonal planar shape.

Bonding pairs of electrons in acetone. The central atom in acetone is carbon.

The carbon atom forms two double bonds with the two oxygen atoms, and there is a single bond between carbon and the hydrogen atom.

Trigonal planar is a molecular geometry model that indicates the shape of a molecule where the central atom is located at the center and has three atoms surrounding it at an angle of 120 degrees. The trigonal planar is a shape that is possible for molecules with a central atom that has three bonds and no lone pairs.

Learn more about Trigonal planar here:

https://brainly.com/question/17110157#

#SPJ11

The nucleotide sequence of an organism's genome, that of a virus, extrachromosomal DNA, or other genetic components can change permanently in a process known as mutation.

Any alteration to a cell's DNA sequence. Mistakes in cell division can result in mutations, as can exposure to environmental DNA-damaging substances.

Gene mutations can be divided into two categories: small-scale mutations and large-scale mutations.

Appearance Alteration is the capacity to modify another person's skin, hair, and vocal chords (also known as adaptive appearance manifestation).

The genes that encode our pigment's sensitivity to color can multiply themselves throughout time. The additional copies are susceptible to mutations that change the range of wavelengths they can absorb.

To know about function https://brainly.com/question/11624077

#SPJ4

Answer:

610 k because is the hollwsphere is the gasis and 1 kpa of helium

If a solid sample of copper is an excellent conductor of electric current, it is likely due to the presence of metallic bonds in the sample.

Good conductors are the materials which offer very low resistance to the flow of electric current.

Solid copper is a metal, and metals have metallic bonds. Metallic bonds are a type of chemical bond that occur between atoms of metallic elements. In a metallic bond, valence electrons of the metal atoms are delocalized and shared among all the atoms in metallic solid, creating "sea" of electrons that are free to move throughout the structure.

This gives metals their unique properties such as high electrical conductivity and ductility. So, if solid sample of copper is an excellent conductor of electric current, it is likely due to the presence of metallic bonds in sample.

To know more about conductor, refer

https://brainly.com/question/492289

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: A solid sample of copper is an excellent conductor of electric current . Which type of chemical bonds are in the sample?

The one low-tech method that is currently available to actively remove [tex]CO_2[/tex] from the air is afforestation.

Afforestation is the process of establishing a forest or stand of trees in an area where there was no forest. It is a type of forestation that involves planting trees in an area where there was no forest before. The process includes selecting an area, planting tree saplings, and nurturing them to maturity, allowing for effective CO2 removal over time.

The practice of afforestation has been used as a tool to combat climate change and mitigate the effects of global warming. The trees absorb [tex]CO_2[/tex] from the atmosphere and release oxygen through photosynthesis.

Therefore, afforestation is an effective way to remove [tex]CO_2[/tex] from the atmosphere.

To learn more about afforestation refer: https://brainly.com/question/6693804

#SPJ11

The normal ratio of bicarbonate to dissolved CO2 in arterial blood is: 20:1

This means that, for every molecule of dissolved CO2 in arterial blood, there are 20 molecules of bicarbonate. This ratio is important for the maintenance of proper blood acidity and helps ensure that the body's systems function properly.

Bicarbonate helps to regulate the pH balance in the blood and helps to keep it within the range that is necessary for the proper functioning of the body's systems. Bicarbonate is produced by the kidneys and helps to maintain the blood's acid-base balance by controlling the amount of CO2 in the blood.

As CO2 enters the blood, it combines with the bicarbonate, and this helps to maintain the proper balance of acidity in the blood. The body uses bicarbonate to neutralize acids that enter the blood through the digestive system, which helps to maintain the proper pH balance in the blood.

Bicarbonate also helps to reduce the amount of lactic acid in the blood, which can build up after exercise. The body also uses bicarbonate to help excrete excess carbon dioxide in the urine, which is produced when the body breaks down food. The normal ratio of bicarbonate to dissolved CO2 in arterial blood helps to ensure that the body is functioning properly.

The ratio helps to regulate the acid-base balance in the blood and helps to ensure that the body's systems are able to function optimally. Without the correct ratio of bicarbonate to dissolved CO2, the body's systems would not be able to function properly.

To know more about bicarbonate refer here:

https://brainly.com/question/8560563#

#SPJ11

In order to make a solution that is 1.5ppm in fluoride ion using sodium fluoride (NaF), 750L of water needs to be added to 0.22g of NaF.

Mass of NaF (g) = Concentration of F (ppm) x Volume of Water (L) / 1,000,000.

NaF mass = 1.5ppm x 750L / 1,000,000.

Since the atomic weight of NaF is 41.99, 0.22g is equivalent to 0.00518mol NaF.

The molarity (M) of the solution,

Molarity (M) = Moles of Solute (mol) / Volume of Solution (L)

Molarity 0.00518mol / 750L = 0.000068M.

Therefore, 0.22g of NaF should be added to 750L of water to make a solution that is 1.5ppm in fluoride ion.

to know more about sodium fluoride refer here:

https://brainly.com/question/2807538#

#SPJ11

The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:

Let's understand this step-by-step:

1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:

HCl + NaOH → NaCl + H2O

This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.

Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol

moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol

The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:

mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol

The total volume of the solution is the sum of the volumes of the acid and the base:

Vtotal = Vacid + Vbase

Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L

The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:

[HCl] = mol of HCl remaining / Vtotal

[HCl] = 0.004375 mol / 0.07000 L

[HCl] = 0.0625 M

The pH of the solution can be calculated using the equation:

pH = -log[H+]

The concentration of H+ in the solution is equal to the concentration of HCl, so:

[H+] = [HCl] = 0.0625 M

Substituting this value into the pH equation:

pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.

Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076

#SPJ11

The Diels-Alder mechanism between a diene and a dienophile is concerted. Option (a) is correct.

The Diels-Alder reaction is a cycloaddition reaction in which a diene reacts with a dienophile to form a new cyclic structure.The reaction proceeds through a concerted mechanism, which means breaking of a sigma bond and the formation of a new pi bond between the diene and dienophile takes place simultaneously.

The six-membered ring formed as a result is called a cyclohexene, and the reaction is referred to as a cycloaddition reaction. The diene usually contains two alkene groups which are separated by one or more carbon-carbon double bonds.

On the other hand, the dienophile is usually an electron-deficient alkene or alkyne, it may contain electron-withdrawing groups that make it more reactive towards nucleophilic attack, or it may have pi-electrons in a non-bonding orbital which make it more susceptible to nucleophilic attack. The reaction is considered to be highly exothermic and the stereochemistry of the product formed is determined by the stereochemistry of the reactants.

If the diene and dienophile are both cis or trans, the product will be cis or trans, respectively. But, if one is cis and the other is trans, the product will be a mixture of both cis and trans.

Thus, option (a) is correct.

To know more about Diels-alder mechanism here

https://brainly.com/question/31237913

#SPJ4

Industrial production of potassium chromate uses potassium: K2Cr2O7 + K2CO3 2 K2CrO4 + CO. Chromic hydrazine (chromium trioxide, CrO3) is transformed into red crystals after being treated with cold sulfuric acid.

It is an orange-colored substance with a potent oxidising ability. Heat will therefore cause potassium dichromate to break down into potassium chromate and release oxygen gas.

When elements interact chemically with potassium dichromate, the oxidation state of its atoms increases and they become more electronegative. Potassium dichromate is indeed a strong oxidising agent in an acidic medium.

To know more about hydrazine visit:

https://brainly.com/question/17045336

#SPJ1

To determine the volume of NaOH used to reach the equivalence point of the titration using the titration data, we need to find the point where the acid and base are neutralized.

At this point, the moles of acid and base are equal, and this is called the equivalence point.To find the volume of NaOH used at the equivalence point, we can use the following

Steps:1. Plot the titration data on a graph of pH versus volume of NaOH added.

Steps:2. Identify the point where the pH changes abruptly. This is the equivalence point.

Steps:3. Determine the volume of NaOH added at the equivalence point by reading the volume from the graph.

Steps:4. Compare the volume of NaOH used at the equivalence point of the titration with the predicted volume calculated above.The extent of agreement with the predicted volume can be assessed by calculating the percent error.

The percent error is calculated using the formula:

                                      Percent error = [(experimental value - theoretical value) / theoretical value] x 100

If the percent error is small, then the agreement is good. If the percent error is large, then there is a significant difference between the predicted and experimental values.

Learn more about equivalence point of the titration here, https://brainly.com/question/31181892

#SPJ11

Therefore, a reaction would be exothermic if the sum of a enthalpies of a reactants is higher than the enthalpies of a products. A reaction is endothermic if the enthalpy on the products side is higher.

Correct option is, A.

Hence, a reaction is exothermic as well as its enthalpy will indeed be negative if it releases less energy than it takes in. See this as a certain quantity of heat evaporating from (or being removed from) the reaction. Endothermic reactions have positive enthalpies because they absorb or use more energy than they produce.

Laundry detergent powder can be quickly exothermically reacted by being dissolved in a small amount of water in your hand. Dissolving potassium chloride (offered as a salt replacement) in water in your hand is one simple endothermic reaction.

To know more about enthalpy visit:

https://brainly.com/question/13996238

#SPJ1

Lactate and pyruvate are byproducts of anaerobic glycolysis. Anaerobic glycolysis is the metabolic process of breaking down glucose into energy when oxygen is not available.  

During anaerobic glycolysis, glucose is broken down into pyruvate in the absence of oxygen, which is then converted into lactate as a means of regenerating NAD⁺ so that glycolysis can continue. This process is commonly used by muscle cells during intense exercise when oxygen delivery cannot keep up with the energy demand. In contrast, during aerobic glycolysis, glucose is broken down into pyruvate in the presence of oxygen, which then enters the mitochondria to be further metabolized in the citric acid cycle.

Learn more about anaerobic glycolysis: https://brainly.com/question/28173469

#SPJ11

The Arrhenius equation shows that the activation energy is directly proportional to the logarithm of the rate constant and inversely proportional to the temperature.

The Arrhenius equation is

[tex]k = A e^{-\frac{E_a}{RT}}[/tex]

where:

k is the rate constant is the pre-exponential factor

Ea is the activation energy

R is the gas constant

T is the temperature in Kelvin

According to the Arrhenius equation, as temperature increases, the rate constant, and thus the reaction rate increases exponentially. This is because as temperature increases, the average kinetic energy of the molecules in the reaction mixture increases, leading to a greater proportion of molecules with sufficient energy to react.

The activation energy of a reaction, Ea, is the minimum energy required for reactant molecules to react and form products. The Arrhenius equation shows that the activation energy is inversely proportional to the rate constant, and thus the reaction rate. As temperature increases, the proportion of reactant molecules with sufficient energy to overcome the activation energy barrier increases, reducing the activation energy and increasing the reaction rate.

Overall, the Arrhenius equation demonstrates that increasing temperature increases the reaction rate and decreases the activation energy.

To learn more about activation energy refer - brainly.com/question/14776335

#SPJ11

The theoretical yield of water formed from the reaction of 34.3 g of hydrochloric acid and 72.6 g of sodium hydroxide is 16.9 g.

The balanced chemical equation of the reaction can be written as follows:

HCl + NaOH → NaCl + H₂O

The reactants, hydrochloric acid (HCl) and sodium hydroxide (NaOH), are combined in a 1:1 mole ratio. This means that for every mole of HCl, one mole of NaOH is necessary to produce one mole of water and one mole of sodium chloride.

The molar mass of HCl and NaOH is 36.5 g/mol and 40.0 g/mol, respectively. Dividing their mass with their respective molar mass, we will have the number of moles of each reactant.

moles HCl = 34.3 g / 36.5 g/mol = 0.94 mol

moles NaOH = 72.6 g / 40.0 g/mol = 1.815 mol

Therefore, 34.3 g of HCl is equivalent to 0.94 moles, and 72.6 g of NaOH is equivalent to 1.82 moles.

Since these are in a 1:1 mole ratio, this reaction should produce 0.94 moles of water. The molar mass of water is 18.0 g/mol, and thus the theoretical yield of water produced is:

mass = moles x molar mass = 0.94 mol x 18 g/mol = 16.9 g.

Learn more about theoretical yield here: https://brainly.com/question/25996347.

#SPJ11

The limiting reactant is Sulphur,  according to the chemical reaction given in the question.

Let's take the balanced chemical reaction in the question

2S + 3O₂ + 4NaOH → 2Na₂SO₄ + 2H₂O

Here,

We have to identify the limiting reactant when 2.0 g of sulfur reacts with 3.0 g of oxygen and 4.0 g of sodium hydroxide.

First, we need to calculate the moles of each substance, and then we can find out the limiting reactant.

Let's do it one by one.

Mole of sulphur (S) = 2 g/32 g/mol = 0.0625 moles

Moles of Oxygen (O2) = 3 g/32 g/mol = 0.09375 moles

Moles of Sodium Hydroxide(NaOH) = 4g/40g/mol = 0.1 moles

Now, we have to compare the number of moles of each substance to find out the limiting reactant.

Here we can see that the number of moles of sulphur (S) is the least among all the reactants, i.e., 0.0625 moles.

Hence, the limiting reactant is sulfur (S).

Therefore, the correct answer is "sulphur."

To know more about the limiting reactant https://brainly.com/question/14225536

#SPJ11

Answer:

See Below.

Explanation:

Europe and North America are drifting apart at a rate of about 3 cm per year due to continental drift. To find out how many years are required for them to drift 1 meter apart, we can use a simple formula:

Years = Distance / Rate

Plugging in the values, we get:

Years = 100 cm / 3 cm per year

Years = 33.33

Therefore, it would take about 33.33 years for Europe and North America to drift 1 meter apart at the current rate.

I hope this helps!

To find the number of years needed for Europe and North America to drift apart by 1.00 meter, given a drift rate of 0.438 cm per year, we convert the meter into centimeters, and then divide by the rate. The calculation gives approximately 228 years.

To determine the number of years required for the continents to drift apart by 1.00 meter, we use the concept of rate, distance and time often used in mathematics.

Given the rate of drifting is 0.438 cm per year, we first convert the 1.00 meter into centimeters as calculations should be in the same units. 1 meter equals 100 cm.

We then divide the total distance by the rate of drift to find the time. So, 100 cm/0.438 cm per year gives approximately 228 years.

Therefore, it would take approximately 228 years for Europe and North America to drift 1.00 meter apart at the current rate.

https://brainly.com/question/16549128

#SPJ2

If 254 ml of a 2.10 m sucrose solution is diluted to 850.0 ml ,  the molarity of the diluted solution is 0.63 M.

Given:

Initial volume of sucrose solution, V1 = 254 mL

Initial molarity of sucrose solution, M1 = 2.10 M

Initial volume of diluted solution, V2 = 850 mL

To calculate Molarity of the diluted solution, M2

We can use the formula of Molarity, given as:

Molarity = (Number of moles of solute) / (Volume of solution in liters)

or

M1V1 = M2V2

Let's apply this formula in the given data:

M1V1 = M2V2(2.10 M) x (254 mL) = M2 x (850 mL)

Now, convert mL to L:

M1V1 = M2V2(2.10 M) x (0.254 L)

= M2 x (0.850 L)M2

= (2.10 M x 0.254 L) / 0.850 LM2

= 0.63 M

Therefore, the molarity of the diluted solution is 0.63 M.

For more such questions on molarity , Visit:

https://brainly.com/question/30404105

#SPJ11

Answer:

1. Ans: B

Explanation: Pinakbet, which contains vegetables such as eggplants and kalabasa, are physically combined. Therefore, the pinakbet is an example of a mixture

2. Ans: A

Explanation: Heterogenous are different building blocks that are mixed UNEVENLY.

At STP, one mole (6.02 × [tex]10^{23}[/tex] representative particles) of any gas occupies a volume of 22.4 L . A mole of any gas occupies 22.4 L at standard temperature and pressure (0°C and 1 atm).

Answer : The molar mass of magnesium is 24.305 g/mol

To calculate the mass of magnesium that participated in the chemical reaction, you need to know the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol. Multiply the number of moles of magnesium by the molar mass of magnesium to calculate the mass of magnesium that participated in the chemical reaction.  

For example, if you were given that the number of moles of magnesium is 0.25 moles, then you can calculate the mass of magnesium by multiplying 0.25 moles by 24.305 g/mol. This gives a result of 6.076 g of magnesium that participated in the chemical reaction.

To sum up, calculating the mass of magnesium that participated in the chemical reaction requires knowing the number of moles of magnesium and the molar mass of magnesium. The molar mass of magnesium is 24.305 g/mol, and you can calculate the mass of magnesium that participated in the chemical reaction by multiplying the number of moles of magnesium by the molar mass of magnesium.

Know more about magnesium here:

https://brainly.com/question/1533548

#SPJ11

The number of particles of water that exist in a closed test tube after the water vaporizes and turns into a gas will be the same as the number of particles before the phase change.

This is because during the phase change, the molecules of water simply change their state from liquid to gas.the phase change from liquid to gas does not involve any change in the number of molecules, only a change in the physical state of the molecules.  The molecules do not disappear or gain additional molecules from outside the test tube. As such, the number of particles of water in the test tube after the phase change is the same as before the phase change.

learn more about phase change Refer:brainly.com/question/30270780

#SPJ1

The number of mole present in 87 grams of potassium bromide, KBr is 0.731 mole

We'll begin our calculation by obtaining the molar mass of potassium bromide, KBr. Details below:

Molar mass of potassium bromide, KBr = K + Br

Molar mass of potassium bromide, KBr = 39 + 80

Molar mass of potassium bromide, KBr = 119 g/ mol

Finally, we shall determine the number of mole present. Details below:

Mole = mass / molar mass

Mole of potassium bromide, KBr = 87/ 119

Mole of potassium bromide, KBr = 0.731 mole

Learn more about mole:

https://brainly.com/question/13314627

#SPJ1

Complete question:

How many moles are in 87g of potassium bromide?

The student obtained an optically active product after exposing r-1-bromo-2-propanol to sodium hydroxide. The proton NMR of the product is also provided.

The structure of the compound that the student isolated is:CH3 – CH (OH) – CH2 – Br

In the given compound r-1-bromo-2-propanol, the bromine atom is attached to the first carbon atom. When this compound is treated with sodium hydroxide, the hydroxide ion attacks the carbon atom attached to the bromine atom and forms a negatively charged oxygen atom.This negatively charged oxygen atom further attracts the proton of the adjacent carbon atom (second carbon atom). After the transfer of a proton, the negatively charged oxygen atom gets neutralized and an alkoxide ion is formed. This alkoxide ion further attacks the third carbon atom and the compound is formed.In the compound obtained, there is no plane of symmetry or center of symmetry. This makes the compound optically active.

Further, the proton NMR shows the presence of a singlet at chemical shift 1.1 ppm due to the presence of three equivalent methyl groups. The presence of a broad singlet at chemical shift 3.7 ppm is due to the presence of –OH group. The singlet at chemical shift 4.2 ppm is due to the presence of –CH2 group.The structure of the compound that the student isolated is CH3 – CH (OH) – CH2 – Br.

Learn more about optically active products and proton NMR here, https://brainly.com/question/24215073

#SPJ11