Answer:
Some clouds form as air warms up near the Earth's surface and Rises heated by Sunshine the ground heats the air just above it that warm air starts to rise because when warm it is lighter and less dense than the air around it as it rises its pressure and temperature drop causing water vapor to condense.
When airborne water vapor condenses into observable water droplets or ice crystals, clouds are created.
Condensation is most likely the cause of cloud formation. The transformation of airborne water vapor into a liquid or solid state is known as condensation. When the air is cooled or the pressure of the water vapor is raised, this occurs.
Water vapor from the Earth's surface is constantly evaporating into the atmosphere. When this water vapor rises, it cools in the atmosphere. The pressure of water vapor rises as the air cools. Water vapor will condense on minute airborne particles like dust, pollen, or salt crystals when the water vapor pressure reaches a particular level.
Learn more about clouds, here:
https://brainly.com/question/1558130
#SPJ6
Which of the living things in the pond system uses the energy from sunlight
to make its own food?
A:water lily
B:insect
C:frog
D:small fish
A. water lily
It is a plant. Plants are autotrophs. They make their own food.
Answer:
i am not sure with the answer.
but i think it will be water lily Or insects
Which of the following is an electrolyte?
CH4OH
O Ca(NO3)2
O C12H22011
O CH3CH2OH
Answer:
B. Ca(NO3)2
Explanation:
edg 2022
Answer:
b
Explanation:
What is the molarity of a solution containing 2 moles of sodium hydroxide (NaOH) dissolved in 4.0 L of solution?
Answer:
0.5M
Explanation:
Molarity = Mols/ Liters
so 2/4
0.5 M
g h g jg jh gj h g jhg u iga ff f. f. f f f
why is heat or thermal energy considered a form of kinetic energy
What mass of ocean water in grams contains 50.8 g of NaCl?
Answer:
1451.42 g
Explanation:
Let assume that the mass of ocean water comprises 3.5%
NaCl = 3.5%
[tex]3.5 = \dfrac{50.8}{mass \ of \ ocean \ water } \times 100[/tex]
[tex]mass \ of \ ocean \ water = \dfrac{50.8}{3.5 } \times 100[/tex]
mass of the ocean water = 1451.42 g
What is the best way to avoid bacterial contaminantion?
Answer:
Wash hands and surfaces often. Harmful bacteria can spread throughout the kitchen and get onto cutting boards, utensils, and counter tops. To prevent this: Wash hands with soap and hot water before and after handling food, and after using the bathroom, changing diapers; or handling pets.
PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5
Answer:
hope it helps you
The ionization energies of Calcium are (in KJ/mol): 1st: 589.8 2nd: 1145.4 3rd: 4912.4
Explain why there is such a large jump from 2nd to 3rd ionization energy.
pleaseeee i need help, my brain is just not getting it
Answer:
See whole explanation to understand
Explanation:
the reason why there is such a large jump from 2nd to 3rd ionization energy for calcium is because to remove the third electron, a larger amount of energy is required, since the shell is closer to the nucleus, and higher attraction exists between them. This is why the second ionization energy is 1125.4 and then the third IE is 4912.4 which is a very big difference. It's all about the elections and energy!!
Atoms of different element can not have same atomic number because only same type of atoms combine to form element. Atoms belonging to different element can have different atomic number. Therefore, higher attraction between shell and nucleus, there is such a large jump from 2nd to 3rd ionization energy.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. Two or more than two atoms with different physical or chemical properties can not combine together to form an element.
The reason why there is such a large jump from 2nd to 3rd ionization energy for calcium is because to remove the third electron, a larger amount of energy is needed, since the shell is closer to the nucleus, and higher attraction exists between them.
Therefore, higher attraction between shell and nucleus, there is such a large jump from 2nd to 3rd ionization energy.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ2
Matthew added a sample of sodium chloride to water and
found the poH to be 2,55. What is the pH of the salt solution?
pH
Answer:
11.45
Explanation:
The ph is just 14-pOH so
14-2.55=ph=11.45
If hydrogen diffuses at the rate of 10 cm³ per second from a given apparatus under given conditions of temperature and pressure, calculate under same conditions: a) the volume of oxygen (O₂) which diffuses in 20 seconds
Answer:
Volume of O₂ = 200cm³
Explanation:
Rate of diffusion of gas is directly and inversely proportional to the volume and time taken for the gas to diffuse completely.
Volume
R = -----------
time
let R₁ represent the rate at which the given volume of hydrogen gases diffuses and R₂ represent the rate at which the the volume of the oxygen gas diffused.
V₁, V₂, T₁ and T₂ follows the same process
If the two gases diffuses at the same rate, then;-
R₁ = R₂
V₁ V₂
---------- = ------------
T₁ T₂
V₂
10 = ----------------
20
V₂ = 20•10
V₂ = 200cm³
Therefore, the volume of oxygen that could diffuse in 20 seconds is 200cm³
An experiment requires 65.00 g of sodium chloride. Sodium chloride is available at a price of $179.0 per 5.000 kg sodium chloride. What is the cost of the sodium chloride in the experiment (reported to the hundredths place because we're working with dollars)?
Answer: on
Explanation:5
The price of sodium chloride per 5 kg is 179 dollars. The experiment requires 65 g of NaCl. The price of65 g or 0.065 kg is 2.3 dollars.
What is sodium chloride?Sodium chloride is an ionic compound formed by the combination of sodium metal and chlorine atom. Sodium metal has extra one electron in its valance shell and chlorine needs one more electron into its valence shell. Hence sodium donates its valence electron to chlorine forming NaCl.
NaCl is used as the table salt in food. It is a very important compound in our daily diet. Similarly NaCl is industrially important for many reaction especially in electrochemical processes.
It is given that, the price of 5 kg of NaCl = $179
required mass of NaCl = 65 g = 0.065 Kg
then , price of 0.065 kg = (0.065 × 179 /5) = $2.31
Therefore, the cost of NaCl in the experiment is 2.31 dollars.
Find more on NaCl:
https://brainly.com/question/4487559
#SPJ2
CHEMISTRY - DOES ANYONE KNOW HOW TO DO THIS QUESTION???
Cathode: 2 Ag+ (aq) + 2 e- → 2 Ag (s). Anode: 2 H+ (aq) → H2 (g) + 2 e-.
What is cathode ?
A cathode is an electrode in an electrical circuit from which electrons flow out. It is usually made of metal and is negatively charged. Cathodes are commonly used in electronic devices such as batteries, lamps, and vacuum tubes. In a battery,
the cathode is the terminal which provides a negative charge and is usually connected to the negative terminal of the battery. In a vacuum tube, the cathode is the source of electrons which flow through the tube to the anode, which is the positive terminal.
To learn about more cathode .
https://brainly.com/question/4052514
#SPJ1
How many grams of KCl, are soluble in 100 g of water at 60 ºC?
a)15g
b)35g
c)45g
d)90g
45 g
the solubility of KCl in water at 60 degree c is 45.5g per 100g of water
PLZ HELP ASAP
Approximately how many grams of potassium chloride(KCI) are required to prepare 600. mL of a 2.50 M solution ?
A) 103 g
B) 112 g
D) 125 g
(B)
Explanation:
2.50 M KCl = (2.50 mol KCl/L)(0.600 L) = 1.50 mol KCl
molar mass of KCl = 74.5513 g KCl/mol
1.50 mol KCl × (74.5513 g KCl/mol) = 112 g KCl
If the temperature of 85.0 g of copper changes from 28.0°C to 99.0°C, how much
heat was absorbed? The specific heat capacity of copper is 0.385 J/K:g. Write your
answer to 3 sig figs.
Answer:
2320 J
Explanation:
We'll begin by calculating the change in temperature of the copper. This can be obtained as follow:
Initial temperature (T₁) = 28.0 °C
Final temperature (T₂) = 99.0 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 99 – 28
ΔT = 71 °C
Finally, we shall determine the heat absorbed by the copper. This can be obtained as follow:
Mass of copper (M) = 85 g
Change in temperature (ΔT) = 71 °C
Specific heat capacity (C) = 0.385 J/K.g
Heat (Q) absorbed =?
Q = MCΔT
Q = 85 × 0.385 × 71
Q = 2320 J
Thus, the heat absorbed is 2320 J
please no links and round two decimal places
Answer:
https://vm.tiktok.com/ZMet3FuC2/
why is carbon IV oxide and water removed before liquefication of air?
Answer:
Because when they unfreeze and are cooled they would block pipes of the air liquefaction plant and make the air colder, hope this helps!!
Which molecules do your cells get from food?
(Select two answers)
A) Amino Acid
B) Glucose
C) Oxygen
D) Carbon Dioxide
Answer:
b
Explanation:
mark me brainliest pls
Answer:
b
Explanation:
bc
__PbSO4 → __ PbSO3 +__O2
Balance the equation and indicate the type of reaction
A 0.982-g sample of an unknown gas exerts a pressure of 700 mm Hg in a 450-cm3 container at 23oC. Calculate the molar mass of this gas. [1cm3 = 1mL; 1000mL = 1L]
Answer:
57.4 g/mol
Explanation:
Step 1: Convert 450 cm³ to L
We will use the conversion factors 1 cm³ = 1 mL and 1000 mL = 1 L.
450 cm³ × 1 mL/1 cm³ × 1 L/1 mL = 0.450 L
Step 2: Convert 23 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 23 + 273.15 = 296 K
Step 3: Calculate the number of moles of the gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V / R × T
n = 700 mmHg × 0.450 L / (62.4 mmHg.L/mol.K) × 296 K = 0.0171 mol
Step 4: Calculate the molar mass of the gas
0.982 g of the gas correspond to 0.0171 moles.
M = 0.982 g/0.0171 mol = 57.4 g/mol
What contributes to water's properties?
Polar molecule
Shape of the molecule
All of the other options are correct
Oxygen is more electronegative than hydrogen
What is the molarity of a solution composed
of 4.27 g of potassium iodide (KI) dissolved in
enough water to make 0.304 L of solution?
Answer in units of M.
Answer:
0.0845 M
Explanation:
First we convert 4.27 grams of potassium iodide into moles, using its molar mass:
Molar Mass of KI = 166 g/mol4.27 g ÷ 166 g/mol = 0.0257 molNow we calculate the molarity of the solution, using the number of moles and the given volume:
Molarity = moles / litersMolarity = 0.0257 mol / 0.304 L = 0.0845 MIn "The Philosophy of the Manufacturers" by Andrew Ure, the author compares a factory worker to a handmade
worker. The author leads the reader to the idea that the factory worker is better off. Choose evidence (a quote
from the text) to support this idea.
a. Certainly no muscular fatigue to sustain, while it procures for him good, unfailing wages, besides a
healthy workshop gratis.
b. The lot of mankind, have been too little dwelt upon; while, on the other har, it has been accused of
lending itself to the rich capitalists as an instrument for harassing the poor.
c. The principle of the factory system then is, to substitute mechanical science for hand skill, and the
partition of a process into its essential constituents.
"Certainly no muscular fatigue to sustain, while it procures for him good, unfailing wages, besides a healthy workshop gratis."
What idea does the quote supports?The concept that factory workers have it better than handcrafted workers is supported by this textual quotation since it implies that factory work is less physically taxing and offers better pay and working conditions.The author is suggesting that factory worker is in better position than hand worker.This is beneficial for the worker, as it means they can work for longer periods of time without experiencing the same level of exhaustion.Finally, the quote states that a factory provides a "healthy workshop gratis" which means that the factory provides a healthy and clean working environment for the worker without any additional costs. This is beneficial for the worker, as it means they can work in a safe and healthy environment, which is not always the case for hand workers.To know more about healthy workshop conditions quote, check out :
brainly.com/question/10588742
#SPJ1
Find the molarity of a solution in which 0.99 mol of NaCl are dissolved in 2.5 L of solution.
Answer:
0.369M
Explanation:
[tex]\boxed{Molarity = mole \div volume}[/tex]
☆ Volume has to be in litres
Molarity of solution
= 0.99 ÷2.5
= 0.369 M
A chemist morning commute is 40.2 kilometers. Given an average speed pf 60.5 mph, how many minutes will it take him to arrive at work?
A chemist morning commute is 40.2 kilometers. Given an average speed pf 60.5 mph, 0.66 minutes will it take him to arrive at work.
What is average speed ?The overall distance the object covers in a given amount of time is its average speed. A scalar value represents the average speed. It has no direction and is indicated by the magnitude.
If you know how far something has travelled and how long it took to get there, you can calculate its average speed. Speed is calculated as follows: speed = distance * time.
Distance = speed × time
40.2 = 60.5 × time
time = 40.2 / 60.5
= 0.66 minutes
Thus, A chemist morning commute is 40.2 kilometers. Given an average speed pf 60.5 mph, 0.66 minutes will it take him to arrive at work.
To learn more about an average speed, follow the link;
https://brainly.com/question/12322912
#SPJ1
Hello!
please help me!
The nerve gas phosgene decomposes according to COC12(g) - CO(g) + Cl2(g), K = 0.32 at 1000 K. If
the initial concentration of phosgene is 0.015 M. what are the equilibrium concentrations of all gases?
Answer:
[tex][CO]=[Cl_2]=0.01436M[/tex]
[tex][COCl_2]=0.00064M[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction at equilibrium, we can set up the equilibrium expression as follows:
[tex]K=\frac{[CO][Cl_2]}{[COCl_2]}[/tex]
Which can be written in terms of x, according to the ICE table:
[tex]0.32=\frac{x^2}{0.015M-x}[/tex]
Thus, we solve for x to obtain that it has a value of 0.01436 M and therefore, the concentrations at equilibrium turn out to be:
[tex][CO]=[Cl_2]=0.01436M[/tex]
[tex][COCl_2]=0.015M-0.01436M=0.00064M[/tex]
Regards!
What is the importance of a chemical symbol?
Answer:
Chemical symbols are used to standardize the 'language of chemistry' and to identify elements and atoms in a chemical formula easily. Chemical symbols consist of one or two letters, most often derived from the name of the element.
Explanation:
Answer:
Explanation:
A chemical symbol is a notation of one or two letters representing a chemical element. Its used to identify elements and atoms in a chemical formula easily. Chemical symbols consist of one or two letters, most often derived from the name of the element.
You have three solutions of nickel complex ions, one is blue, one is violet, and one is green. Match the complex ion with the correct solution color.
A. [Ni(en)3]2+
B. [Ni(H2O)6]2+
C. [Ni(NH3)5]2+
Answer:
Explanation:
A. [Ni(en)₃]²⁺ --------- Violet
B. [Ni(H₂O)₆]⁺² -------Green
C. [Ni(NH₃)₅]⁺² ---------Blue .
20. A compound's empirical formula is C,H,O. If the molecular mass of the compound is
162.2g, what is the molecular formula?
NO LINKS PLEASE THIRD TIME IM POSTING THIS ITS DUE IN 8min
Answer:
Just use a text book.. So that you get the concept