A vitamin supplement is a dietary supplement containing one or more essential vitamins, typically in the form of a pill, capsule, or tablet.
What are Vitamins?
Vitamins are a group of organic compounds that are essential for normal cellular functioning. They are required for a wide range of bodily functions, such as metabolism, growth, development, and immunity. They can be found naturally in food sources or taken as dietary supplements. There are 13 essential vitamins, including vitamins A, C, D, E, K, and the B vitamins.
The mass of fluorine that can be recovered from the vitamin is 455.9 mg (50.51% of 900 mg). The mass of iron that can be recovered from the vitamin is 444.1 mg (the remaining amount of 900 mg).
To calculate this, we need to use the percent composition formula:
Mass of Element = (Percent Composition/100) x Total Mass
Mass of Fluorine = (50.51/100) x 900 mg = 455.9 mg
Mass of Iron = (100 - 50.51)/100 x 900 mg = 444.1 mg.
To know more about vitamins,
https://brainly.com/question/9348916
#SPJ4
Which of the following is a characteristic of a strong acid?
O A. It does not conduct electricity in water.
B. It completely dissociates in water.
C. It reacts with water to form H2 gas.
O D. It increases the OH concentration.
The statement, that describes the characteristic of a strong acid is "it completely dissociates in water."
What is a strong acid?
In aqueous solution, strong acids and bases are completely ionised.
A strong acid is one that entirely ionises in solution. When dissolved in water, it emits the maximum number of hydrogen ions or protons, implying that it always loses a proton (H+).
As a result, it is possible to deduce that a strong acid (HA) entirely dissociates in solution.
Hence the correct option is B.
Learn more about here
https://brainly.in/question/5487028
#SPJ2
When 10g of hydrogen gas react with chlorine gas, how many liters hydrogen monochloride (HCl) will be produced at STP
The amount of hydrogen monochloride that is produced at STP is 152 mL.
The balanced chemical reaction can be depicted as follows:
H₂ + Cl₂ -----> 2 HCl
According to stoichiometry, When one mole of hydrogen reacts with one mole of chlorine, it yields two moles of hydrogen monochloride. Stoichiometry defines the relationship between the quantities of reactants and products before, during, and following chemical reactions
If, 2 g of Hydrogen reacts with 71 g of chlorine to form 73 g of Hydrogen Chloride.
Therefore, if 10 g reacts with 142 g of chlorine, the HCl produced will be 152 g or 152 ml of HCl.
To learn more about stoichiometry check the link below:
https://brainly.com/question/14935523
#SPJ4
16% of m is 28
16% x m = 28
0.16 x m = 28
m = ...
Answer:
m=175
Explanation:
100/16 = 6.25
6.25x28 = 175
Answer: To solve this equation for m, you can divide both sides of the equation by 0.16. This will give you:
m = 28 / 0.16
Simplifying the right side of the equation gives:
m = 175
Therefore, m = 175.
Explanation:
i need help asap now answer all blanks
Answer:
2
Explanation:
You want the coefficient of silver iodide in the equation ...
_AgI +_Na₂S ⇒ _Ag₂S +_NaI
Balanced equationThe equation is balanced when the numbers of each of the species is the same on each side of the equation.
We can write four equations in the four unknowns to find the coefficients, or we can use a little guesswork.
If we suppose the coefficient of silver sulfide (Ag₂S) is 1, that tells us the coefficient of silver iodide (AgI) will be 2. If that is the case, then there are two atoms of iodine that will make the coefficient of NaI be 2. This is consistent with the coefficient of Na₂S being 1, giving one Sulfur atom on each side of the equation.
The balanced equation is ...
2AgI +Na₂S ⇒ Ag₂S +2NaI
The coefficient of silver iodide is 2.
__
Additional comment
If the reaction is ...
a·AgI + b·Na₂S ⇒ c·Ag₂S + d·NaI
We can write the relationships between the coefficients as follows. This ultimately gives rise to 3 equations in 4 unknowns, so the choice of any given coefficient is arbitrary. We choose to use the smallest integers that satisfy the conditions.
The balance for Ag is ...
a = 2c
The balance for I is ...
a = d
The balance for Na is ...
2b = d
The balance for S is ...
b = c
Then, in terms of 'a' and 'b', we have ...
a = d = 2b = 2c
For b = c = 1, a = d = 2, as we determined above.
Which of the following are advantages of a furnace over a flame in atomic absorption?
a. a smaller sample amount is required
b. memory effects from the previous run are not present in even the most basic version
c. the sample is atomized in only one heating step
d. less operator skill is required to determine the proper experimental conditions
e. higher sensitivity because the atomized sample is in the optical path longer
A furnace has an advantage over a flame in atomic absorption because it is more sensitive due to the lengthier time the atomized material remains in the optical path.
A process of absorption is what?Absorption in chemistry is the process by which a material that is already present in one state gets assimilated into another substance that is already present in another state (e.g., gases being absorbed by a liquid or liquids being absorbed by a solid).
What in chemistry are adsorption and absorption?Absorption and adsorption have quite different definitions. A liquid can be absorbed by a substance like a sponge, cloth, or filter paper. The absorbent substance absorbs all of the liquid. Adsorption describes the accumulation of single molecules, atoms, or ions on surfaces.
To know more about Absorption visit:
https://brainly.com/question/14286976
#SPJ4
a scientist oserves a chemical reaction as it takes place. how can the scientist so in order to tell if the reaction has acheived equilibrium
A chemical reaction reaches equilibrium when the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentrations of the reactants and products.
A scientist observing a chemical reaction can tell if the reaction has achieved equilibrium by monitoring the following: Concentration of reactants and products: The concentrations of reactants and products should no longer change over time if the reaction has reached equilibrium. Temperature: If the reaction has reached equilibrium, the temperature of the system should remain constant. Pressure: If the reaction is taking place in a closed container, the pressure of the system should also remain constant if the reaction has reached equilibrium. It's worth noting that the equilibrium is a dynamic process, meaning that the concentrations of reactants and products will remain constant over time, but the chemical reaction is still taking place.
Learn more about chemical reaction here:
https://brainly.com/question/29762834
#SPJ4
How many moles of mercury (II) oxide are needed to produce 65.00 g of mercury?
Answer:
the moles of mercury are nHg = 65/201
HgO --------> Hg + 1/2O2
65/201 65/201
=> the moles of HgO are 65/201 mol
what is the molar mass of c2h16?
use 4 significant figures in your answer.
Answer:
40.15 g/mol
Explanation:
The molar mass of c2h16 is
40.1484 g/mol ≈ 40.15 g/mol (rounded to 4 significant figures)
Organic compounds form the basis of?
Answer:
1. carbon
Explanation:
carbon atoms bound to one another and other atoms by covalent bonds and found in the cells of living organisms. Hydrogen, oxygen and nitrogen are typical elements which, in addition to carbon, make up organic compounds.
Who first identified the element radium? charles richard drew enrico fermi jonas salk marie curie
Marie Curie is credited with the discovery of radium. In 1898, she and her husband Pierre Curie discovered the element while experimenting with pitchblende, an ore containing uranium. They isolated a new substance, which they named radium, after the Latin word for ray.
What is uranium?Uranium is a naturally occurring element that is found in rocks and soil. It is a dense, silvery-white metal that has the highest atomic weight of all elements. Uranium is slightly radioactive and produces energy when it undergoes nuclear fission. It is an important source of energy generation and is used in nuclear reactors to produce electricity. Uranium also has a variety of other uses, such as in military applications, medical imaging, and industrial processes. It is a nonrenewable resource, and its supply is limited. Due to its radioactive nature, uranium must be handled with caution and special safety precautions must be taken to protect against the radiation it
To learn more about uranium
https://brainly.com/question/29234132
#SPJ4
Answer: its D- Marie Curie
Explanation: I got it right on the test! hope this helps :)
Select all that identify an ionic bond.
metal - metal
metal - metal
metal - nonmetal
metal - nonmetal
nonmetal - nonmetal
nonmetal - nonmetal
metal - polyatomic
metal - polyatomic
polyatomic - polyatomic
polyatomic - polyatomic
polyatomic - nonmetal
Answer:
metal - metal
metal - metal
metal - polyatomic
metal - polyatomic
metal - nonmetal
metal - nonmetal
Which aqueous solution is expected to have a pH less than 7 at 25∘C?
a) LiNO3 (aq)
b) NH4Br (aq)
c) RbC2H3O2 (aq)
d) MgCl2 (aq)
[tex]NH_{4} Br[/tex](aq ) is expected to have a Ph less than 7 as on dissociation the following constituents will separate
[tex]NH_{4} Br[/tex] + [tex]H_{2}O[/tex] → [tex]NH_{4} OH[/tex](weak base) + [tex]HBr[/tex] (strong acid)
A weak base is a strong acid hence B is correct
[tex]LiNO_{3}[/tex] It is a salt of a strong base and weak acid hence basic and a PH greater than 7
[tex]MgCl_{2}[/tex]it is a salt of a strong base and strong acid hence a neutral solution of PH 7
[tex]RbCH_{2} H_{3} O_{2}[/tex] It is a salt of a strong base and weak acid hence basic and a PH greater than 7
To learn more about PH
brainly.com/question/2288405
#SPJ4
plzz help mi chemists
Answer:
i) Iron metal is obtained
ii) Fe2O3 + 3CO → 2Fe + 3CO2
iii) CO is the reducing agent
Explanation:
i) When carbon monoxide is passed over iron III oxide, iron metal is obtained
ii) The equation of the reaction is;
Fe2O3 + 3CO → 2Fe + 3CO2
iii) The reaction is a redox reaction. CO acts as the reducing agent while Fe2O3 acts as the oxidizing agent. We know that CO is the reducing agent because its oxidation number increased from left to right. Recall that the oxidation number of the reducing agent increases from left to right in a redox reaction
What is 0.151 g in scientific notation
Answer: Scientific notation- [tex]1.51 x 10^{-1}[/tex]
Explanation: I got this by moving the decimal, so that there is one non-zero digit to the left of that decimal point. Tip- The number of decimal places you move will be the exponent on the 10.
Moved right- Negative
Moved left- Positive
Which argument supports the claim that dissolving calcium chloride (CaCl2) in water is a chemical change
The argument that supports the claim that dissolving solid calcium chloride (CaCl2) in water is a chemical change is A. The ionic bond among calcium and chloride ions has been broken..
When solid calcium chloride is added to water, the ionic bonds between the calcium ions (Ca2+) and chloride ions (Cl-) are broken apart by the polar water molecules. The calcium ions and chloride ions are then surrounded by the water molecules, forming a new chemical compound called calcium chloride hydrate (CaCl2*xH2O) which is different from the original solid calcium chloride. This process is a chemical change because it creates new substances and the original chemical bonds are broken and new bonds are formed.
Learn more about chemical compound here:
https://brainly.com/question/11527546
#SPJ4
the complete question is:
Which of the following arguments supports the claim that dissolving calcium chloride (CaCl2) in water results in a chemical change?
A. The ionic bond among calcium and chloride ions has been broken.
B. By evaporating the water, the solid calcium chloride can be recovered.
C. The ions found in the solid remain in the solution and have not changed.
D. Ions are attracted by the polar water molecules.
List the number of sigma bonds and pi bonds in a double bond. Group of answer choices 2 sigma, 0 pi 1 sigma, 2 pi 1 sigma, 1 pi 2 sigma, 3 pi
There is one sigma as well as one pi bond in a double bond.
Sigma bonds and pi bonds are the two types of covalent bonds. Sigma bonds are formed when there is an end-to-end overlapping of the atomic orbitals. A pi bond is formed when there is a lateral or a side-by-side overlapping of the atomic orbitals.
The sigma bonds are represented by a "σ" symbol and pi bonds are represented by "π" symbol. One sigma bond is there in a single bond. A double bond contains one sigma as well as one pi bond. A triple bond has one sigma as well as two pi bonds.
--The given question is incomplete, the complete question is
"List the number of sigma bonds and pi bonds in a double bond. Group of answer choices 2 sigma, 0 pi 1 sigma, 2 pi 1 sigma, 1 pi 2 sigma, 3pi, 1pi 1 sigma."--
To know more about sigma bonds here
https://brainly.com/question/13818226
#SPJ4
when a set amount of marble chips (caco3) is added to a small amount of dilute hydrochloric acid, a reaction occurs. what should be done to decrease the rate of reaction the next time the experiment is performed
A tiny amount of weak hydrochloric acid is mixed with a quantity of marble chips (CaCO3), to decrease the rate of reaction we do decreasing the surface area of the marble chips, decreasing conc. HCL and many more.
Several ways are:-
1. Decreasing the surface area of the marble chips: By breaking the marble chips into smaller pieces, the surface area that is available for the acid to react with is reduced, slowing down the reaction.
2. Decreasing the concentration of the hydrochloric acid: By using a less concentrated solution of hydrochloric acid, the number of acid molecules available to react with the marble chips is reduced, slowing down the reaction.
3. Increasing the temperature: By performing the reaction at a lower temperature, the kinetic energy of the acid and marble chip molecules is reduced, slowing down the rate of collision between them, which slows down the reaction.
4. Using a catalyst: Addition of a catalyst to the reaction can change the reaction mechanism and decrease the activation energy needed for the reaction to occur, thus slowing down the reaction.
5. Using an inhibitor: An inhibitor is a substance that slows down the reaction by binding to the enzyme or catalytic site and preventing the substrate from binding.
It's important to note that these methods may also affect the overall yield of the reaction, so it's essential to use the appropriate method(s) for the specific experiment and goals.
To know more about hydrochloric acid please refer: https://brainly.com/question/14006357
#SPJ4
Electroplating is a way
to coat a complex metal object with a very thin (and hence inexpensive) layer of a precious metal, such as silver or gold. In essence the
metal object is made the cathode of an electrolytic cell in which the precious metal cations are dissolved in aqueous solution
Suppose a current of 0.490 A is passed through an electroplating cell with an aqueous solution of AgNO_3, In the cathode compartment for 90.0 seconds.
Calculate the mass of pure silver deposited on a metal object made into the cathode of the cell.
Be sure your answer has a unit symbol and the correct number of significant digits.
Answer:
0.049 g of Ag
Explanation:
From the question;
Ag^+ (aq) + e ----->Ag(s)
1 e = 96500 C
Note that Q= It
Where;
I = current and t= time taken
108 g of silver is deposited by 96500 C of electricity
x g is deposited by (0.49 * 90) C
x = 108 * (0.49 * 90) /96500
x= 0.049 g of Ag
A chemist reported that 100 gallons of a gas were available in a laboratory. Which property of the gas did the chemist report?
O Length
O Mass
O Temperature
O Volume
A chemist reported that 100 gallons of a gas were available in a laboratory, The property of the gas did the chemist report is volume option - D is correct answer.
Just what is volume?The space occupied by a three-dimensional object is measured using the scalar quantity known as volume. The volume of a liquid or gas is calculated using the container's capacity as the unit of measurement.
A state of matter known as gas lacks a consistent shape and a set volume. They are the least dense and have the most space between their moles.
A gallon is a unit of volume that is used in the American metric system. The volume of gas equals the sum of the moles of gas in the container, which contains 100 gallons of gas.
To know more about volume visit:
https://brainly.com/question/27025817
#SPJ4
The table shows the nature of the reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants Products
Ionic compound + Ionic compound Ionic compound + Ionic compound
Which of the following is true about this type of chemical reaction?
It is a single replacement reaction, and all four compounds are different.
It is a double replacement reaction, and all four compounds are different.
It is a single replacement reaction, and each compound has the same set of ions.
It is a double replacement reaction, and each compound has the same set of ions.
The reaction that has been shown in the table above is a double replacement reaction, and each compound has the same set of ions. Option D
What is a reaction?Another word that we can use for reaction is what we call a chemical change. We know that a chemical change is the kind of change that will lead to the formation of a new product. It is an irreversible process as we can not be able to get back the reactants again.
We should note that there are various types of reactions. In a single replacement reaction, you would notice that there is only one substance that reacts and causes a change while in the double replacement reaction, the anions that are in the compounds that underwent the reaction would just exchange anion partners and we would have two ionic products.
Learn more about reactions:https://brainly.com/question/28984750
#SPJ1
1. Assertion:Amobea is unicellular organism and has no organs for
breathing.
R: Respiration of amobea is by diffusion.
Answer:
Amoeba has no special respiratory organs and no respiratory pigments but there is a free exchange of gases by diffusion through the general body surface which is permeable to the gases dissolved in water
name an appropriate drying agent for hydrogen gas
Answer:
Sjjejwhsshw
Explanation:
Sssskeo1jshi1bdi kwn ieni, nei, nei nei nei neox3nixnec
When you squeeze the end of a toothpaste tube, toothpaste is pushed out the other end. This follows _________.
A. Boyle's Law
B. Charles' Law
C. Pascal's Principle
D. Bernoulli's Principle
Answer:
c. is the answer
Explanation:
c. Pascal principal
Consider the reaction.
NH4HS(s)⇌NH3(g)+H2S(g)
At a certain temperature, Kc=8.5×10−3. In a reaction mixture at this temperature containing solid NH4HS, [NH3]=0.166 M and [H2S]=0.166 M. Will more of the solid form or will some of the existing solid decompose as equilibrium is reached?
In the reaction, NH4HS(s)⇌NH3(g)+H2S(g), more of the solid will form.
What is equilibrium?In a chemical reaction, equilibrium is the state where both the reactants and products are present in concentrations which have no further tendency to change with time, so there is also no observable change in the properties of the system. This state results when forward reaction proceeds at the same rate as reverse reaction.
If Q= K then equilibrium
Q>k, then reversed direction shift
Q<k, then forward direction shift
Given, Kc=8.5×10−3
Given [NH3]=0.166 and M [H2S]=0.166 M
Here Q= 0.166 M (given)
It shows Q> k that is 0.166 > 8.5×10−3
Therefore, more of the solid will form.
To know more about chemical equilibrium, refer
https://brainly.com/question/8869462
#SPJ4
When you boil a pot of liquid water, the water turns to steam and rises in the air. This is an example of what.
A: condensation
B: precipitation
C: evaporation
D: absorption
Answer:
Hello There!!
Explanation:
The answer is C: evaporation because evaporation is the process in which a liquid boils then evaporates and lastly becomes a gas.
hope this helps,have a great day!!
~Pinky~
According to the forces of attraction, when you boil a pot of liquid water, the water turns to steam and rises in the air. This is an example of evaporation.
What are forces of attraction?
Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/23841038
#SPJ6
True or False: invasive species are native species that do no cause economic or environmental harm to the ecosystem.
Answer:
False
Explanation:
They do cause harm.
In an atom that has lost an electron, the place vacated by the free electron is referred to as a(n)
The space left by the free electron in an atom after it has lost one electron is known as a hole.
The term "free electron" refers to an electron that has broken loose from its "parent" atom and is now free to move about the material at random. A vacancy, also known as a hole, is created in the atom when a bonded electron in a lattice atom breaks free. The number of electrons in an atom's valence shell, or n shell in this example, has a significant impact on the electrical properties of the element that the atom represents. The least force of attraction is felt by the electrons in the valence shell since they are the furthest from their nucleus.
To learn more about atom click here https://brainly.com/question/1566330
#SPJ4
What happens when ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty)?
please make it sound like i wrote it :(
When ocean water that is more dense (colder or saltier) is mixed with water that is less dense (warmer or less salty), the denser water will sink to the bottom and the less dense water will rise to the top. This is known as stratification, and it helps to create distinct layers in the ocean.
This stratification can create an environment that is more conducive to life, as it allows different types of organisms to inhabit different layers of the ocean.
The different layers of the ocean created by stratification play a significant role in the global climate system. Colder, denser waters are usually found at the bottom of the ocean, while warmer, less dense waters are found near the surface.
This temperature difference creates a natural convection system that drives currents throughout the ocean, which helps to regulate temperatures on a global scale. Additionally, stratification can also affect the amount of oxygen in the ocean.
Learn more about density of the ocean:
https://brainly.com/question/28819040
#SPJ4
What is the difference between a solution and a suspension.
Answer:
In a solution, the solute particles that are in the solvent are evenly mixed and so small that you can't see them. In a suspension, the pieces of solute are large and can be seen floating throughout the solvent. For example, dust floating through the air is a suspension.
As an ionic solid dissolves in water, the temperature of the solution increases. What best describes the enthalpy and entropy of the solution
The water solution gets hotter when an ionic solid dissolves in it. Entropy increases and there is a decrease in enthalpy change.
The spread of the solute molecules (and the thermal energy they carry) through the larger volume of the solvent during the dissolution of a solute typically results in a rise in entropy. When a liquid or solid dissolves in a solvent, entropy typically rises. Less negative entropy change is occurring (or perhaps even at this stage, positive). The chemicals will likely become more soluble as a result. The total result is a delicate balancing act between how the solution's enthalpy changes and how its entropy changes. When a substance is divided into several pieces, entropy rises. Entropy is raised via the disintegration process.
To learn more about entropy click here https://brainly.com/question/24278877
#SPJ4