Engineering High School


A company has the goal of developing technology to remove carbon dioxide
from the atmosphere. Its design team is making a model based on one
possible solution to the problem. Which step of the engineering design
process comes next?

Answers

Answer 1

Answer: The next step in the engineering design process would be to create a prototype of the model and test it to see how well it works.

Related Questions

Which of the following is recommended as part of the annual maintenance program for a gasoline-powered boat?

A) Change the spark plugs with automotive plugs and check spark distance
B.) Drain and check bilge along with topping off the anti-freeze level
C.) Calibration and re-installation of an automotive-type fuel pump
D.) Examination of thru-hull fittings for signs of leakage or corrosion

Answers

The most recommended choice as part of the annual maintenance program for a gasoline-powered boat would be option D) Examination of thru-hull fittings for signs of leakage or corrosion.

Thru-hull fittings are essential components of a boat's plumbing system.

They are responsible for allowing water to enter or exit the boat for various purposes such as cooling, bilge pumping, or livewell circulation.

Regular inspection of thru-hull fittings is crucial to ensure their integrity and functionality.

Examining thru-hull fittings for signs of leakage or corrosion is important for several reasons.

Firstly, leaks in thru-hull fittings can lead to water ingress, which can cause damage to the hull, electrical systems, or equipment onboard.

Detecting leaks early on can help prevent further damage and potential sinking of the boat.

Secondly, corrosion can weaken the fittings over time, compromising their structural integrity.

Corroded thru-hull fittings may fail, leading to water intrusion or even loss of the fitting itself.

By inspecting for signs of corrosion, such as rust or deterioration, necessary maintenance or replacement can be planned to ensure the fittings are in good condition.

Regular examination of thru-hull fittings should include checking for tightness, cracks, wear, or other visible damage.

It is also advisable to ensure the proper operation of any valves associated with the fittings.

While the other options may also be part of a maintenance program, examining thru-hull fittings for leakage or corrosion is particularly crucial for the safety and reliability of a gasoline-powered boat.

It helps mitigate potential risks associated with water ingress, hull integrity, and overall vessel performance.

For more questions on corrosion

https://brainly.com/question/489228

#SPJ8

Other Questions
Magnetic flux is to be produced in the magnetic system shown in the following figure using a coil of 500 turns. The cast iron with relative permeability r = 400 is to be operated at a flux density of 0.9 T and the cast steel has the relative permeability = 900. a) Determine the reluctances of the different materials and the overall reluctance b) Determine the flux density inside the cast steel c) Determine the magnetic flux and the required coil current to maintain the flux in the magnetic circuit d) Draw an equivalent magnetic circuit of the system 100 25 Cast iron 30 Cast steel N = 500 Dimensions in mm B BO 12.5 -A 25Previous question In the PFD diagram, What information should be given?Please explain the meaning of the following labels in the PFD diagram: V0108, T0206, R0508, P0105A/B, and E0707. Through an illustrative diagram, show all steps common to conducting audits as stipulated by ISO 19011:2018. Problem specification: Programming Exercises Chapter 3 #5 Three employees in a company are up for a special pay increase. You are given a file, say EmpData.txt, with the following data: Miller Andrew 65789.87 9.3 Green Sheila 75892.56 7.8 Sethi Amit 74900.50 15.5 Each input line consists of an employee's last name, first name, current salary, and percent pay increase. For example, in the first input line, the last name of the employee is Miller, the first name is Andrew, the current salary is 65789.87, and the pay increase is 9.3%. Write a program that reads data from the specified file and stores the output in the file UpdatedEmp.txt. For each employee, the data must be output in the following form: Employee name: Miller, Andrew Current salary: $65789.87 %pay rise: 58 ==== New salary amount: ******* Employee name: Green, Sheila Current salary: $75892.56 %pay rise: 6 ===== New salary amount: ******** Note: Use the appropriate output manipulators to format the output of decimal numbers to two decimal places. Which of the following is not a stage in the information processing model of memory? a) Sensory memory b) Short-term memory c) Long-term memory d) Episodic memory i need help please!! Python Code Please!Suppose that I pick three random integers between 1 and 100. What is the probability that the two smallest of the three have a sum that is greater than the largest of the three? Write a program that estimates the answer to this problem, using a simulation running 50,000 trials. (Don't try to provide a numerical answer to the question!) 1.1. A 440 V, 74.6 kW, 50 Hz, 0.8 pf leading, 3-phase, A-connected synchronous motor has an armature resistance of 0.22 2 and a synchronous reactance of 3.0 22. Its efficiency at rated conditions is 85%. Evaluate the performance of the motor at rated conditions by determining the following: 1.1.1 Motor input power. [2] [3] 1.1.2 Motor line current I, and phase current IA. 1.1.3 The internal generated voltage EA. Sketch the phasor diagram. [5] If the motor's flux is increased by 20%, calculate the new values of EA and IA, and the motor power factor. Sketch the new phasor diagram on the same diagram as in 1.1.3 (use dotted lines). [10] Question 2 2.1. A 3-phase, 10 MVA, Salient Pole, Synchronous Motor is run off an 11 kV supply at 50Hz. The machine has X = 0.8 pu and X, = 0.4 pu (using the Machine Rating as the base). Neglect the rotational losses and Armature resistance. Calculate 2.1.1. The maximum input power with no field excitation. [5] 2.1.2. The armature current (in per unit) and power factor for this condition. [10] Question 3 3.1. A 3-phase star connected induction motor has a 4-pole, stator winding. The motor runs on 50 Hz supply with 230 V between lines. The motor resistance and standstill reactance per phase are 0.250 and 0.8 Q respectively. Calculate 3.1.1. The total torque at 5 %. [8] 3.1.2. The maximum torque. [5] 3.1.3. The speed of the maximum torque if the ratio of the rotor to stator turns is 0.67 whilst neglecting stator impedance. [2] Simplify the following the boolean functions, using four-variable K-maps: F(A,B,C,D) = (2,3,12,13,14,15) OA. F= A'B'C+AB+ABC B. F= A'B'C+AB OC. F= A'B'C+AB'C D. F= AB Star Jewelry sells 700 units resulting in $90,000 of sales revenue, $31,000 of variable costs, and $26,000 of fixed costs. The number of units that must be sold to achieve $43,000 of operating income is511 units, 819 units, 755 units An annulus with inner radius a=1.6 m and outer radius b=3.8 m lies in the xy plane. There is a constant electric field with magnitude 9.9 mV, that makes an angle =65.9 with the horizontal. What is the electric flux through the annulus? Vm 1 point possible (graded) An annulus with inner radius a=1.6 m and outer radius b=3.8 m lies in the xy plane. There is a constant electric field with magnitude 9.9 mV, that makes an angle =65.9 with the horizontal. What is the electric flux through the annulus? Vm name at least two actions that you might take if you were to see a large animal on the right shoulder of the road in front of you 5. A polymorphic function is one that is capable of taking arguments of multiple types, so long as those arguments support all the operations that the function may try to perform on them. Explain the importance of polymorphism. [4 marks] 6. What is the type of function apply? fun apply (f,1)= if 1 nil then nil else f(hd (1))::apply(f, tl(1))) [3 marks] 7. Why do many languages permit operations on strings (concatenation, dynamic re-sizing, etc.) that they do not in general permit on arrays? [4 marks] 8. List two main problems associated with aliases in computer programs. [4 marks] 9. What are the pros and cons of reference counting over mark-and-sweep for garbage collection? [4 marks] 1 This assignment is somewhat open-ended, but creativity is encouraged. Basically, you are to create a custom operator that takes in multiple inputs (like the sample program we did in class). The program that you are to design calculates the time it takes somebody to fall the entire distance from the top of the world's tallest skyscrapers to the ground (no parachute). You are to consider, -terminal velocity -acceleration -dimensions of the person (width & height) -mass -building height or which building -etc. You are to research and use the proper equations/formulas to accurately estimate the duration of the fall time. Lastly, please make your program presentable or user-friendly. Bonus points will be awarded to students who go above and beyond. Imagine that you took a road trip. Based on the information in the table, what was the average speed of your car? Express your answer to three significant figures and include the appropriate units. Use mi as an abbreviation for miles, and h for hours, or mph can be used to indicate miles per hour. X Incorrect; Try Again; 5 attempts remaining What is the average rate of formation of Br_2? Express your answer to three decimal places and include the appropriate units. 3. Explain why Fe- and Al oxides are more reactive than Si- andTi-oxides. Eve has intercepted the ciphertext below. Show how she can use astatistical attack to break the cipher? a) Explain the terms molar flux (N) and molar diffusion flux (J)b) State the models used to describe mass transfer in fluids with a fluid-fluid interfacec) Define molecular diffusion and eddy diffusiond) Define Ficks Laws of diffusion. I was able to simplify to the final form of x+4/2x-6 but am unsure what the limits are. For example x cannot equal . What are the different types of High Voltage and NonDestructive Tests for different power systems equipment (TreeDiagram).