When the outer wall moves at a speed of 3.0 m/s, and an 83-kg person feels a 545-N force pressing against his back then the radius of a chamber is 8.5 meters.
The radius of the chamber can be calculated using the equation
F = mv²/r, where F is the force felt by the person, m is the mass of the person, v is the velocity of the chamber and r is the radius of the chamber. In this case, F is 545 N, m is 83 kg, and v is 3.0 m/s.
Plugging in these values, we get
r= mv²/F
r= 83×3²/545
r = 8.5 m.
Therefore, the radius of the chamber is 8.5 m.
Learn more about force:
https://brainly.com/question/25239010
#SPJ4
If you wanted to soundproof your bedroom, the best material to line the walls would be
1. dense material such as plywood
2. soft material such as a foam cushion
3. a very hard material such as ceramic tile
Answer:
a soft foam material because soft materials absorb sound better
in some places, hot water from underground can shoot up into the air through a hole in the ground. when this happens, the ground surrounding the water increases in temperature. what happens to the molecules in the ground when the temperature of the ground increases?
The energy of the molecules in the ground increases in the given case when the temperature increases.
Convection and conduction are two ways that the Earth's heat is released.
Conduction takes place when the transferring of heat takes place from something hot to something cold.
On the other hand, convection takes place when the transferring of heat takes place by the movement of hot gases or liquids like water, air, or magma to a cooler region.
Near the surface of the ground, the convection of heat water results in the hot springs and geysers to shoot up into the air through a hole in the ground.
To know more about temperature:
https://brainly.com/question/18271013
#SPJ4
A quarterback throws a ball at 50.00 m/s,and reaches the receiver 0.56 seconds later.What is the distance from the quarter back to the receiver
Answer: 64 m is the maxium distance the ball can travel
A lever with an effort arm of 10 meters and a load arm of 2 meters is used to lift an object weighing 220 Newtons to a height of 4 meters. If 400Joules of work is done, how much force must have been applied?
A. 4000N
B.800N
C.100N
D.1600N
The force that was applied to the lever to raise the load of 220 Newtons toa distance of 4 m is 100 N.
The correct option is C.
What is a lever?A lever gives you the ability to move an object with a certain advantage, allowing you to do so with either less effort or more speed or displacement.
The use of forces and the exploitation of the torques they produce is how levers function. By changing the balance, we can carry large objects with little effort.
The law of the lever is given below as follows:
Fa / Fb = b / a
where;
Fa is the effort or force appliedFb is the load or force overcomea is the effort armb is the load or resistance armThe effort applied, Fa, is calculated below:
Fb = 220 N
a = 10 m
b = 2 m
Fa = Fb * b / a
Fa = 220 * 2 / 10
Fa = 44 N
Work done = Force * distance
distance = 4 m
400 J = Force * 4
Force = 400 / 4
Force = 100 N
Learn more about force and levers at: https://brainly.com/question/416386
#SPJ1
A voltage vL(t)=10cos(2000πt) is applied to a 100-mH inductance.
A)Find the complex impedance of the inductance.
The complex impedance of the 100 mH inductance when a voltage vL(t) = 10cos(2000πt) is applied to it is: j200Ω.
What is inductance?
Inductance is a property of an electrical component that describes the ability of the component to store energy in a magnetic field when electric current passes through it.
Inductance is measured in units of henrys (H). When current flows through a component with inductance, it creates a magnetic field around the component that resists changes to the current. This resistance to changes in current is called inductive reactance and is measured in units of ohms.
The complex impedance of an inductor is given by Z = jωL, where ω is the angular frequency and L is the inductance.
Therefore, the complex impedance of the 100 mH inductance when a voltage vL(t) = 10cos(2000πt) is applied to it is:
Z = j(2000π) (100 x 10-3) = j(2π) (100 x 10-3) = j200Ω
To learn about more inductance
https://brainly.com/question/7138348
#SPJ4
Help me please I have no clue what the answer is!!!!!!!!!!!!
the 3rd option is the correct answer
(. ^ ᴗ ^.)
What is the sound level of rustling of leaves?
The sound level of rusting leaves is 20db.
Rustle is a quiet, muted cracking sound made when dry paper or leaves are moved. The movement of weak objects, like the leaves, produces a gentle sound. Ruffle would be the appropriate response because "leaves" is the noun in the sentence.
Over time, so many people have been mesmerized by the sounds of wind in the trees and the rustling of leaves, that they came up with the term "psithurism" to describe them. Psithurism has a silent first "p," like many other words that start with "ps," and is pronounced sith-err-iz-um.
We sometimes refer to a wind that is howling when it is strong and noisy: The trees shook as the wind howled.
To learn more about Sound level from given link
https://brainly.com/question/30160873
#SPJ4
Rank the following items that describe distances from longest distance (left) to shortest distance (right). (If two distances are equal, drag the second item on top of the first item. )a- the distance from the Milky Way Galaxy to the Andromeda Galaxyb- the distance from the Sun to the center of the Milky Way Galaxyc- the distance from Earth to Alpha Centaurid- one light-yeare- the distance across out solar system (to Neptune)f- the average distance from Earth to the Sun & one astronomical unit (AU)
Galaxy: The distance was calculated in 2004 using the Cepheid variable method to be 2.51 0.13 million light-years (770 40 kpc). In the Andromeda Galaxy, an eclipsing binary star was found in 2005.
Explanation for the above answer:The universe, Earth, the solar system, the Milky Way galaxy, the local group, and the local supercluster.
Astronomers discovered a truly enormous galaxy earlier this year. Alcyoneus is a massive radio galaxy that is around 3 billion light-years away and extends 5 megaparsecs into space. Its length, 16.3 million light-years, makes it the longest structure of known galactic origin.
Our Sun and the Earth are travelling at a speed of about 43,000 miles per hour (70,000 km/hr) roughly in the direction of the brilliant star Vega in the constellation Lyra relative to the local standard of rest.
To learn more about galaxy visit:
brainly.com/question/2905713
#SPJ4
Among the elementary subatomic particles of physics is the muon, which decays within a few microseconds after formation. The muon has a rest mass 206.8 times that of an electron. Calculate the de Broglie wavelength associated with a muon traveling at 8.85 * 105 cm>s
By using the formulae, λ = h/mv, The De Broglie wavelength of the muon is calculated to be 4.13 × 10^10 m, as according to the given data in the question.
Is the nanosecond the shortest?The shortest measured time is 100 attoseconds. A quadrillionth of a minute is a femtosecond. One quadrillionth of a minute is a picosecond. One quadrillionth of a second is a nanosecond.
What is more compact than nano?Particles are smaller than just a nanometer. Depending on the element, an atom is between 0.1 and 0.3 nm in size. Atoms on the a surface in a SEM image.
To know more about Particles visit:
brainly.com/question/1685421
#SPJ4
Which diagram best shows the perceived sound wave heard by a woman after a police car has passed her?
An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.
An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength longer closer to the siren and closer together the farther from the siren on both sides.
An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren that are concentric and evenly spaced.
An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength changing in all directions.
Answer:
A. An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.
The diagram best shows the perceived sound wave heard by a woman after a police car has passed her is
An illustration of a person listening to the siren of a passing police car. There are circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.
The correct option is first.
What is wavelength?The wavelength is the distance between the adjacent crest or trough of the sinusoidal wave. The wavelength is the reciprocal of the frequency of the wave.
The diagram representing circles spreading out from the siren with the wavelength close together in the front and farther apart in the back.
Thus, the correct option is first.
Learn more about wavelength.
https://brainly.com/question/13533093
#SPJ2
How many carbon atoms react in this equation: 2c^2H^10+130^2--> 8co^2+10h^2o
no keyboard spam or links please
Answer:
A chemical reaction expresses a chemical change. For example, one chemical property of hydrogen is that it will react with oxygen to make water. We can write that as follows:
hydrogen reacts with oxygen to make water
We can represent this chemical change more succinctly as
hydrogen + oxygen → water
two blocks are connected by a string of negligible mass that passes over massless pulleys
If two blocks are connected by a string of negligible mass that passes over massless pulleys, the system can be analyzed using the principles of Newton's second law and the conservation of energy.
In this scenario, the net force acting on each block is the tension in the string, which is equal in magnitude for both blocks.
Therefore, if the blocks have different masses, they will have different accelerations.
In this scenario, the mechanical energy of the system is the sum of the gravitational potential energy and the kinetic energy of the blocks. If the pulleys are massless and frictionless, then the mechanical energy of the system will be conserved.
In summary, the two blocks will move together with the same acceleration if the pulleys are massless and frictionless.
To know more about pulleys:
https://brainly.com/question/30189162
#SPJ4
if Jada has 25 dimes how many quarters dose she have
If Jada has 25 dimes, she has 10 quarters .
What are dime and quarter?Dime is a coin from the United States or Canada which has value of ten cents.
And. quarter is a coin from the United States or Canada which has value of twenty five cents.
Jada has 25 dimes .
Now, we know that 1 dime is equals to 10 cents.
Hence, Jada has = 25 × 10 cents = 250 cents.
Again we know that 1 quarter is worth 25 cents.
So, Jada has = (250 ÷ 25) quarters
= 10 quarters.
Hence, she has 10 quarters.
Learn more about dimes here:
https://brainly.com/question/14534255
#SPJ1
Describe the gestalt principles of proximity similarity continuity and closure
Gestalt principles refer to a set of laws in psychology that describe how people perceive visual information. The four principles you mentioned are:
Proximity: Objects that are close to each other are perceived as being related to each other.
Similarity: Objects that are similar in appearance are perceived as being related to each other.
Continuity: People tend to perceive lines and shapes as continuing in the same direction, even if they are interrupted.
Closure: People tend to perceive incomplete shapes as complete, such as seeing a full circle when presented with a set of dots arranged in a circular pattern.
Who is Gestalt?Gestalt theory reinforces the fact the whole of anything is greater than its parts. That is, the attributes of the whole are not deducible from analysis of the parts in isolation. The word Gestalt is utilized in modern German to imply the way a thing has been “placed,” or “put together.” There is no exact equivalent in English.
These principles help us understand how our brain organizes and interprets visual information, and are often used in design to create clear and effective visual layouts.
learn more about Gestalt: https://brainly.com/question/8166281
#SPJ1
Item 2 Sea stars, sea urchins, sand dollars, and brittle stars are all members of the same group. What is the common name of the group to which they all belong
Sea stars, brittle stars, as well as feather stars are a few examples of echinoderms. Despite their apparent differences, echinoderms share two key identifying traits that make them all identifiable.
What is the reputation of echinoderms?Echinoderms are effective scavengers of decomposing material on the seafloor and feed on a range of microscopic organisms, which helps control their population. Sea urchins can destroy tropical sea-grass beds when they are present in great numbers, harming the creatures that live there astrophysics
Why do they go by the name echinoderms?Because of their spiny skin, Echinodermata are so termed (from the Greek "echinos" for "spiny" and "dermo's" for "skin"). There are around 7,000 described extant species in this phylum. Only marine species can be classified as Echinodermata.
To know more about echinoderms visit:
https://brainly.com/question/10298388
#SPJ4
Rosalinda wants to calculate the mass of Earth using Kepler's laws or Newton's universal law of gravitation.Which
data would allow her to find the mass of Earth?
the mass of the Sun and the orbital period of the moon
the moon's orbital period and distance from Earth
Earth's distance from the Sun and the moon's orbital period
Earth's orbital perigd and distance from the Sun
Answer:
On Edg 2021, the answer was "B = The moon's orbital period and distance from Earth"
Explanation:
I hope this is correct for you, if it isn't I am very sorry. Good luck! :)
Newton's principles of motion and the universal law of gravitation can be used to derive Kepler's third law. Make the centripetal force equal to the force of gravity. The following expression, which may also be written as P2=42a3GM, can be obtained by inserting an expression for the planet's velocity: GMr=4r2P2. Thus, option B is correct.
What Kepler's laws or Newton's universal law of gravitation?Newton demonstrated that the force that causes something to fall toward the ground, like an apple, is the same force that causes the moon to orbit the Earth. The Sun, as well as any other star and its satellites, are affected by this universal force.
Newtonian physics and Kepler's laws serve as the foundation for planetary motion and orbital laws. Because these fundamental rules govern everything in the cosmos, they also govern how planets and artificial satellites move.
Therefore, If two things experience the same acceleration when the same force is applied to them, then they have the same inertial mass. Newton's second law makes use of the same mass.
Learn more about Kepler's laws here:
https://brainly.com/question/1608361
#SPJ2
Energy can't be made or destroyed. It is only ever transferred, stored or dissipated. This means that energy is... what?
How many pennies fit in 40cm diameter circle and how many nickels fit in a 20cm diameter circle?
And I can carry my nickels far more easily than you can your bucket of pen-nies. I would prefer to keep every pen-ny. A 40 inch circle would contain about 2507 pen-nies. About 493 nickels would be in a 20 inch circle.
A circle is a shape made up of all points in a plane that are at a specific distance from the center point.The diameter is the distance along the circle's center that must travel in order to touch two points on its periphery.The size of a circle essentially divides it in two.In can also be said that in order to go around a curve while maintaining a distance from another point then there is a moving point in a plane must follow a specific path.While the radius encircles the circle from edge to edge, the diameter of a circle cuts through the center.To know more about Diameter here
https://brainly.com/question/23220731
#SPJ4
The perception of high or low sounds is called ____________. 2. The _______________ is a measurement unit for intensity of sound. a) meter b) decibel c) degree 3. Complete the chart showing decibels and amplitude. Decibel Amplitude 0 1 20 100 60 10000 120 1,000,000 4. On the decibel scale, a "quiet whisper 1 meter away" is about ____________ decibels, where a "jackhammer 3 meters away" is _____________ decibels. a) 20, 100 b) 10, 100 c) 10-15, 90 5. ________________ is the science and technology of sound. 6. The speed of sound is ________________ miles/hr, which is slower than the speed of light at ________________ miles/sec. 7. What does it mean when we say something is "supersonic?" 8. What is a sonic boom? 9. How fast does sound travel through different materials? 10. The Doppler effect is a shift in the _______________ of an oscillation caused by the motion of the source of the oscillation, and occurs at speeds below the speed of sound. a) amplitude b) frequency c) speed 11. Describe how observers "A" and "C" hear the moving sound in the picture in the middle of page 581. 12. Draw a "flow chart" that shows how the process of recording sound occurs.
1. pitch
2. decibel
3. sorry, i dont know
4. c
5. acoustics
Severity and determinants of stunting in children under age 2 years in Odisha (India): A tribal v/s non-tribal analysis
In the past eight years, there has been a 3% annual drop in the prevalence of stunting among Indian tribal children under the age of five.
To determine the predictors of stunting and severe stunting among tribal children, as well as to suggest potential policy and program implications, cross-sectional data from 1000 children (287 tribal and 713 non-tribal) aged 0-23 months from Odisha's Rapid Survey of Children (RSOC, 2014) were analyzed. The findings indicate that birth order and maternal illiteracy are significant predictors of childhood stunting, and that maternal age at marriage and at birth was less than 18 years old and less than 20 years old, respectively, for severe stunting. Basic factors such as poverty and maternal ages of 20 years at the time of the first birth and 18 years at marriage were found to predict severe stunting in tribal children.
Learn more about cross-sectional here-
https://brainly.com/question/14077757
#SPJ4
The wheel in the simplified engine of Figure 1 has radius of 0. 250 m and rotates so that the piston oscillates at angular frequency of 12. 0 rad/s. At = 0, the piston is located at =. Calculate the piston’s position, velocity and acceleration at = 1. 15 s.
The piston's position, velocity, and acceleration at t = 1.15 s are :
Position: 3.45 m
Velocity: 3 m/s
Acceleration: 0 m/s^2
To calculate the piston's position, velocity, and acceleration at t = 1.15 s, we need to know the angular position, velocity, and acceleration of the wheel.
The angular position of the wheel at t = 1.15 s is given by
θ = ωt + [tex]A_{0}[/tex]
where ω is the angular frequency, t is the time, and [tex]A_{0}[/tex] is the initial angular position.
Since the angular frequency is given as 12 rad/s and the initial angular position is 0, the angular position of the wheel at t = 1.15 s is
θ = 12 x 1.15 = 13.8 radians
The piston's position is given by
r = Rθ
where R is the radius of the wheel.
Substituting the value of R and θ,
r = 0.25 x 13.8 = 3.45 m
The velocity of the piston is given by
v = r' = Rθ' = Rω
Substituting the values
v = Rω = 0.25 x 12 = 3 m/s
Acceleration of the piston is given by
a = v' = Rθ'' = Rω' = R(ω^2)θ
As the angular frequency is constant, the angular acceleration is 0 so the linear acceleration is also 0.
Note: Linear acceleration is not equal to the derivative of linear velocity, it is equal to the derivative of velocity with respect to time, which is zero in this case.
Read more about linear and angular kinematics :
https://brainly.com/question/12977552
#SPJ4
Mechanical energy starts the Ferris wheel, charging the lights along the seats, showing Choose energy. The full Ferris wheel begins to move going from Choose to Choose energy.
Mechanical energy is used to start the Ferris wheel, providing the initial rotation and motion to the wheel.
The motion of the wheel then causes the lights along the seats to be powered, allowing them to light up as the wheel turns. The wheel is then able to generate kinetic energy as it moves, which it then uses to continue turning.
As the wheel turns, it transfers its energy from mechanical to kinetic, and this energy is used to keep the wheel moving from start to finish. Kinetic energy is also used to power the centrifugal force which keeps the riders in their seats as the wheel turns, allowing them to enjoy the ride.
Learn more about energy:
https://brainly.com/question/25959744
#SPJ4
10) An ice cube of mass 0.046 kg and temperature -14 C is heated until it is now fully melted and at a temperature of 11C now. What percentage of the total energy was used to melt the ice
90.23 % percentage of the total energy was used to melt the ice.
Define Energy?Energy is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat and light. Energy is a conserved quantity—the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
Calculation -:Total energy used from -[tex]14^{o}[/tex]C to [tex]11^{o}[/tex]C
= [tex]m_{i}c_{i} T_{i}[/tex] + [tex]m_{i} L_{f}[/tex] +[tex]m_{w} c_{w}[/tex]Δ[tex]T_{2}[/tex]
= (0.013×2200×8) + (0.031×334000) + (0.013×486×11)
= 400.4 + 4342 + 69.498
= 4811.898 J
% energy used to melt = 4342/4811.898 × 100
= 90.23 %
To know more about energy visit :
brainly.com/question/1932868
#SPJ4
Let be the function graphed below. If three subintervals of equal length are used, draw rectangles whose area represents a midpoint Riemann sum approximation of f(x) dx. Width of each subinterval: 90 35 30 15 10 5 3 4 5
If three subintervals of equal length are used to do midpoint Riemann sum approximation of ∫f(x)dx from 3 to 6, then width of each subinterval is 1.
To find the midpoint Riemann sum, you first need to divide the interval of integration (from 3 to 6) into three subintervals of equal length. You can choose subintervals of equal length manually by dividing the interval of integration into smaller parts. If we let the width of each subinterval be x, then the length of the interval is 6-3 = 3 and the length of each subinterval, x is 3/3 = 1.
Then, you need to find the midpoint of each subinterval by adding the left and right endpoint of each subinterval and dividing by 2.
For example, the first subinterval is from 3 to 4, so the midpoint is (3+4)/2 = 3.5
the second subinterval is from 4 to 5, so the midpoint is (4+5)/2 = 4.5
and the third subinterval is from 5 to 6, so the midpoint is (5+6)/2 = 5.5
To approximate the area under the curve of f(x) for each subinterval, you can use the value of f(x) at the midpoint of each subinterval and multiply it by the width of the subinterval.
--The question is incomplete, answering to the question below--
"Let f be the function graphed below. If three subintervals of equal length are used, draw rectangles whose area represents a midpoint Riemann sum approximation of ∫f(x)dx from 3 to 6. Width of each subinterval is ____."
To know more on midpoint Riemann sum approximation
https://brainly.com/question/15313559
#SPJ4
The crest of one wave of amplitude 1 meter intersects the crest of another wave of amplitude 3 meter. What is the resultant amplitude
A wave crest is the tallest point in the wave with the greatest displacement value. The junction of the 3-meter and 2-meter waves produces a 1 metre amplitude.
What exactly is amplitude ?
The amplitude of a wave is the measurement of the wave from its still position to its crest or trough. It is measured in metres.
When the wave is crossed, the elevation is 3 metres and the depression is 2 metres, resulting in an amplitude that causes destructive interference. Because 3 m is above the baseline and 2 m is below it, the resultant amplitude is 3 - 2 = 1 m.
As a consequence, the resultant amplitude is one metre.
To learn more about amplitude follow the given link: brainly.com/question/13814350
#SPJ4
NH3 → N2 + H2 Balance and classify it
Answer:
2NH3 --> N2 + 3H2 decomposition
Newton's First Law of Motion means that it will take a force to start and stop an object in motion. a) True b) False
To start and stop an item in motion, according to Newton's First Law of Motion, requires a force.
Newton's First Law: What Is It? Why does it mean that?Newton's first law encapsulates the idea that an object's velocity only changes in response to a force. Unless acted upon by a net external force, Newton's first law states that an object at rest will remain at rest and an object in motion will continue to move at a constant speed.
What does Newton's formula's first law state?Unless acted upon by a net external force, Newton's first law states that an object at rest will remain at rest and an object in motion will continue to move at a constant speed.
To know more about Newton's Law of motion visit:-
https://brainly.com/question/29775827
#SPJ4
Plants need to....................synthesize
protein other than carbon oxygen and hydrogen.
option
1. Phosphorus
2. Calcium
3. Nitrogen
4. None of this
Answer:
nitrogen
Explanation:
because I also had this in exam and I was correct
A tuning fork is used to produce sound waves with a frequency of 514 hertz. The waves travel through the air at 343 m/s. What is the wavelength of the sound waves?
Answer:
0.667 m
Explanation:
Applying,
v = λf................ Equation 1
Where v = velocity of sound, λ = wave length, f = frequency
make λ the subject of the equation
λ = v/f.............. Equation 2
From the question,
Given: v = 343 m/s, f = 514 hertz
Substitute these values into equation 2
λ = 343/514
λ = 0.667 m
Hence the wavelength of the sound wave is 0.667 m
A negative charge of -0. 0005 C exerts an attractive force of 9. 0 N on w second charge that is 10 m away. What is the magnitude of the second charge?
The second charge is 0.0002c in size. For a negative charge of -0. 0005 C, a second charge that is 10 metres away experiences an attracting force of 9.0 N.
In science, the issue of magnitude is undoubtedly of utmost significance. Magnitude typically refers to a size or a distance. We can relate magnitude to the movement by comparing the size and motion speed of the thing. A force in physics is an effect that has the power to alter an object's motion. A force can cause an object with mass to change its velocity, or accelerate (for example, moving from a condition of rest).
q2 = 9*(10)^2/(9*10^9*0.0005)
q2 = 0.0002C
Learn more about force here
https://brainly.com/question/13191643
#SPJ4