Ap Dorji switched on the TV to watch the live coverage of the National Day Celebration. 10 kJ of light energy output 30 kJ of sound energy output 720 kJ of electrical energy input Calculate the efficiency of the TV​

The wavelength of microwaves with a frequency of 9.00x10^9 Hz is approximately 0.0333 meters or 33.3 millimeters.

Microwaves are a type of electromagnetic radiation with a frequency range of around 300 MHz to 300 GHz. They are used for various applications, including communication, cooking, and medical imaging.

The speed of microwaves is the same as the speed of light, which is approximately 3.00x10^8 m/s. This means that microwaves travel at a very high speed and can cover long distances in a short amount of time.

The wavelength of microwaves is inversely proportional to their frequency. This means that as the frequency of microwaves increases, their wavelength decreases.

In other words, higher frequency microwaves have shorter wavelengths, and vice versa. For example, the wavelength of microwaves with a frequency of 9.00x10^9 Hz is approximately 0.0333 meters or 33.3 millimeters.

To know more about wavelength ,visit:

https://brainly.com/question/31143857

#SPJ1

When light strikes a green opaque object, the green wavelength of light is absorbed, while all other wavelengths of visible light are reflected.

A green object appears green to our eyes because it selectively absorbs all wavelengths of visible light except for the green wavelength of light, which is reflected back to our eyes.

When light strikes a green opaque object, the green wavelength of light is absorbed by the object. This means that the green light is not reflected or transmitted, but rather it is absorbed by the object.

When light is absorbed by an opaque object, the energy of the absorbed light is converted into other forms of energy, such as thermal energy. This is because the absorbed light energy causes the atoms in the object to vibrate, which in turn generates heat energy.

To know more about wavelengths,visit:

https://brainly.com/question/31143857

#SPJ1

A standing wave formed on a rope that is 7.5 meters long. The fundamental harmonic forms at 14 Hz.

If the rope is being shaken to form a standing wave pattern displaying five "bumps", then the wave pattern would be called the fifth harmonic.

Complete the chart using the information from above:

( chart is attached below the answer )

To calculate the wavelength, we can use the formula: wavelength = speed / frequency.

For the fifth harmonic, the frequency is 70 Hz, and the speed is 7.5 m/s (given in the problem). Therefore, the wavelength is:

wavelength = speed / frequency = 7.5 / 70 = 0.107 meters.

We can also calculate the period using the formula: period = 1 / frequency. For the fifth harmonic, the period is:

period = 1 / frequency = 1 / 70 = 0.0143 seconds.

To know more about fifth harmonic, visit:

https://brainly.com/question/29022093

#SPJ1

ANSWER:  the mechanical advantage is 3.75.

Explanation:

Given,

Load = 300

Effort = 80

Load distance = 4 cm

Effort distance = 30 cm

To calculate Load distance and Effort distance, we can use the formula:

Load x Load distance = Effort x Effort distance

300 x 4 = 80 x 30

1200 = 2400

Load distance = 4cm

Effort distance = 30cm

Now, we can calculate the mechanical advantage using the formula:

MA = Load / Effort

MA = 300 / 80

MA = 3.75

To answer the first question, we need to determine the location of the center of gravity of the system. Assuming the person and ladder can be treated as a uniform object, the center of gravity will be located at the midpoint of the ladder.

Let's say the ladder is 10 feet long, so the midpoint would be 5 feet from either end. If we assume the ladder is resting at a 60 degree angle against a vertical wall, we can use trigonometry to determine the horizontal distance of the center of gravity from the point where the ladder touches the ground.
Using the sine function, we know that sin(60) = opposite/hypotenuse, so the opposite side (which is the vertical height of the ladder) is 10*sin(60) = 8.66 feet. Therefore, the horizontal distance from the center of gravity to the point where the ladder touches the ground is also 8.66 feet.
To answer the second question :

We need to calculate the torque about the axis of rotation (point B) by taking the total weight of the person + ladder acting at the center of gravity. The formula for torque is torque = force x distance.
The force is equal to the weight of the person + ladder, which we'll assume is 300 pounds. The distance is the horizontal distance we just calculated, which is 8.66 feet.

So the torque about point B would be 300 pounds x 8.66 feet = 2,598 Newton-meters (Nm) or 2,598 pound-feet (lb-ft).

For more questions on: gravity

https://brainly.com/question/940770

#SPJ11  

Rounded to two digits, the equivalent R-factor for all layers is 0.36 m2·K/W. Rounded to two digits, the rate of energy loss is approximately 219 W.

A crucial factor is thermal conductivity because it determines temperature gradients both during material development and inside of devices.

(a) The formula for the R-factor is:

R = thickness / thermal conductivity

For the skin layer:

Rskin = 0.001 m / 0.020 W/m·K = 0.05 m2·K/W

For the fat layer:

Rfat = 0.050 m / 0.20 W/m·K = 0.25 m2·K/W

For the other tissues:

Rtissue = 0.032 m / 0.50 W/m·K = 0.064 m2·K/W

To find the equivalent R-factor for all layers taken together, we need to add the individual R-factors together:

R = Rskin + Rfat + Rtissue

R = 0.05 m2·K/W + 0.25 m2·K/W + 0.064 m2·K/W

R = 0.364 m2·K/W

Rounded to two digits, the equivalent R-factor for all layers is 0.36 m2·K/W.

(b) The formula for the rate of energy loss is:

P = A * (Tcore - Texterior) / R

Converting the temperatures to kelvins:

Tcore = 37 + 273.15 = 310.15 K

Texterior = 0 + 273.15 = 273.15 K

Substituting the given values:

P = 2.0 m2 * (310.15 K - 273.15 K) / 0.36 m2·K/W

P = 219.44 W

Rounded to two digits, the rate of energy loss is approximately 219 W.

To know more about thermal conductivity visit:-

https://brainly.com/question/15343932

#SPJ1

A subsurface is something that is below the layer that is on the surface, whereas a surface is the topside or upward side of a flat item like a table or a liquid.

Surface mining takes place on the Earth's surface and involves moving unused materials out of the way. Subsurface mining, on the other hand, does not involve moving unused sediments or rocks out of the way.

processes on the surface that convert rock to sediment. deposition. sediment settles on the surface away from the breeze or water that is carrying it. melting. happens as rock sinks towards the mantle of the Earth.

To know more about subsurface visit:-

https://brainly.com/question/30167827

#SPJ1

Answer:

A

Explanation:

because it is defined as the rate of change of velocity.

The object will continue to float in a stationary position until acted upon by a force, such as a push or pull.

What is Weight?

Weight is the force with which an object is attracted towards the Earth or any other celestial body due to gravity. The weight of an object can be calculated by multiplying its mass with the acceleration due to gravity. In the SI system of units, weight is measured in Newtons (N).

An object that has a mass of 50kg has a weight of nearly 500 newtons on Earth due to gravity. However, in space, where there is no significant gravity, the object will not experience any weight or force pushing it down. The object will float because there is no force acting upon it to cause it to move in a particular direction. This is due to the absence of gravity, which is the force responsible for the weight of an object.

Learn more about Weight from the given link

https://brainly.com/question/86444

#SPJ1

Answer:

option A

Explanation:similar pole repel each other and opposite pole attract each other.other options (exceptA) shows that similar pole is attracting ,it is not podsible.

Therefore, each hand must supply a minimum force of 12.86 N to turn the steering wheel.

Although you can use any amount of power, modern cars all have assistance, so you don't need to use much force. You can add up to 200 N (20 kg), but any more weight may damage your steering rod ends, which could lead to increased steering vibration or even failure.

The formulas below provide the torque needed to move the steering wheel.

τ = Fr

where r is the steering wheel's radius and F is the power being applied to it.

Given that the steering wheel's diameter in this instance is 35 centimeters, the radius is as follows:

r = 35 cm / 2 = 17.5 cm = 0.175 m

The torque required is given as 4.5 N⋅m.

Therefore:

4.5 N⋅m = F * 0.175 m

Solving for F, we get:

F = 4.5 N⋅m / 0.175 m

F = 25.71 N

The minimal force that each hand must exert is as follows because the driver exerts equal force on each side of the wheel:

F/2 = 25.71 N / 2 = 12.86 N.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

lass windowpane in a home is 0.62 cm thick and has dimensions of 1.5 m × 2.3 m. On a certain day, the indoor temperature is 26°C and the outdoor temperature is 0°C.the amount of energy lost through the window in one day is approximately 37.9 MJ.

We can use the formula for heat transfer through a material, which is:

Q = k * A * (T1 - T2) / d

where Q is the rate of heat transfer, k is the thermal conductivity of the material, A is the surface area of the material, d is the thickness of the material, T1 is the temperature on one side of the material, and T2 is the temperature on the other side of the material.

(a) We first need to find the thermal conductivity of glass. According to engineeringtoolbox.com, the thermal conductivity of glass is approximately 1.05 W/(m*K). We convert the temperatures to Kelvin:

T1 = 26°C + 273.15 = 299.15 K

T2 = 0°C + 273.15 = 273.15 K

Plugging in the values:

Q = (1.05 W/(m*K)) * (1.5 m * 2.3 m) * (299.15 K - 273.15 K) / (0.62 cm / 100 cm/m)

Q = 438.37 W

So the rate at which energy is transferred by heat through the glass is 438.37 W.

(b) We can convert the rate of heat transfer to energy over time by using the formula:

E = Q * t

where E is the energy, Q is the rate of heat transfer, and t is the time. Assuming 24 hours in a day:

E = 438.37 W * 24 h * 3600 s/h

E = 37,910,899.2 J

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

The wave's wavelength is 2 metres.

1/ denotes the number of waves in a wave train that can be found in a length of one metre when wavelength is stated in metres, or the number in wavelength is stated in centimetres, then the length is one centimetre. This value is referred to as the spectrum line's wavenumber. The frequency equation is written as f = /, where is the wave speed and is the wavelength of the wave.

If the total distance between four consecutive crests of a wave is 6 meters, then the wavelength of the wave is equal to that distance divided by the number of crests, which is three.

So the wavelength of the wave is:

6 meters / 3 = 2 meters

To know more about wavelength visit:-

https://brainly.com/question/7143261

#SPJ9

Answer:

The escape speed of a planet is the minimum speed that an object needs to attain to escape the gravitational pull of the planet and not fall back. Since the meteor's speed is less than the escape speed of Planet Zoroaster, it will not escape and will crash into the planet.

To find the final speed of the meteor when it hits the surface of the planet, we can use the principle of conservation of energy. At a great distance from the planet, the meteor has only kinetic energy. As it approaches the planet, its potential energy increases due to the planet's gravitational attraction, while its kinetic energy decreases due to the planet's gravitational deceleration.

At the moment of impact, all of the meteor's kinetic energy will be converted into other forms of energy (such as heat and sound) upon hitting the surface. Therefore, we can equate the initial kinetic energy of the meteor to the sum of its potential energy and its final kinetic energy just before impact.

Initial kinetic energy = 1/2 * m * v1^2

where m is the mass of the meteor and v1 is its initial speed.

Potential energy at the surface of the planet = -G * M * m / R

where G is the gravitational constant, M is the mass of the planet, m is the mass of the meteor, and R is the radius of the planet.

Final kinetic energy just before impact = 1/2 * m * v2^2

where v2 is the final speed of the meteor just before impact.

We can set these equal and solve for v2:

1/2 * m * v1^2 = -G * M * m / R + 1/2 * m * v2^2

Simplifying and solving for v2, we get:

v2 = sqrt(2 * G * M / R + v1^2)

Plugging in the given values, we get:

v2 = sqrt(2 * 6.6743 × 10^-11 m^3 kg^-1 s^-2 * M / 5 × 10^6 m + (5.0 km/s)^2)

where M is the mass of Planet Zoroaster.

Without knowing the mass of Planet Zoroaster, we cannot determine the exact value of v2. However, we can use the given escape speed to find the mass of the planet:

escape speed = sqrt(2 * G * M / R)

=> M = R * escape speed^2 / (2 * G)

Plugging in the given values, we get:

M = 5 × 10^6 m * (12.0 km/s)^2 / (2 * 6.6743 × 10^-11 m^3 kg^-1 s^-2) = 3.599 × 10^25 kg

Now we can calculate the final speed of the meteor:

v2 = sqrt(2 * 6.6743 × 10^-11 m^3 kg^-1 s^-2 * 3.599 × 10^25 kg / 5 × 10^6 m + (5.0 km/s)^2) ≈ 12.032 km/s

Therefore, the meteor will be moving at a speed of approximately 12.032 km/s when it hits the surface of Planet Zoroaster.

Answer:

Assuming the block has uniform resistivity throughout, if all of the dimensions of the block double, then the resistance of electric current along each axis will increase by a factor of 8. This is because the resistance of a material is dependent on its dimensions, and specifically on its length, area, and resistivity. When the dimensions of the block double, its length, width, and height all double, which means that the overall length of the path the current must take through the material increases by a factor of 2+2+2=6. Since resistance is directly proportional to length, the overall resistance of the block increases by a factor of 6. Additionally, since the area of the block's cross-section increases by a factor of 4 (2 x 2), the overall resistance decreases by a factor of 4. Therefore, the overall effect is that the

the astronaut's weight in orbit will be 1/16th of her weight on the planet's surface.

(a) Yes, the astronaut will be weightless when she reaches the station and floats inside it. This is because the space station is in freefall around the planet, and the astronaut will be in the same state of freefall as the station.

(b) The ratio of the astronaut's weight in orbit to her weight on the planet's surface can be found using the equation:

w_orbit/w_surface = [tex](R_surface / R_orbit)^2[/tex]

where w_surface is the astronaut's weight on the planet's surface, w_orbit is her weight in orbit, R_surface is the planet's radius, and R_orbit is the radius of the station's orbit.

Substituting R_orbit = 4R_surface and simplifying, we get:

w_orbit/w_surface = (1/16)

Learn moew about astronaut's here:

https://brainly.com/question/11244838

#SPJ1

Answer:

The equation for the total mechanical energy of an object in SHM is:

E = 1/2 kA^2

where E is the total mechanical energy, k is the spring constant, and A is the amplitude.

To solve the problem, we need to find the spring constant of the oscillator:

f = 1/T

where f is the frequency and T is the period.

T = 1/f = 1/0.60 = 1.67 s

The angular frequency of the oscillator is:

ω = 2πf = 2π/T = 3.76 rad/s

The spring constant of the oscillator is:

k = mω^2 = 0.35 x (3.76)^2 = 4.97 N/m

i) The maximum kinetic energy of the object is equal to the maximum potential energy, which is:

Emax = 1/2 kA^2 = 1/2 x 4.97 x (0.14)^2 = 0.012 J

ii) The maximum potential energy of the object is the same as the maximum kinetic energy, which is:

Emax = 1/2 kA^2 = 1/2 x 4.97 x (0.14)^2 = 0.012 J

iii) At the mid-way point between the centre and the extremity of the motion, the displacement of the oscillator is half the amplitude, which is 70 mm or 0.07 m. At this point, the kinetic energy is zero, and the potential energy is:

E = 1/2 kx^2 = 1/2 x 4.97 x (0.07)^2 = 0.012 J

Therefore, the total mechanical energy at this point is also 0.012 J.

About 1.98 x 10²⁰ Newtons of gravitational force are exerted by the moon on the Earth.

The angle subtended if observed from two diametrically opposed places on the Earth. The moon is 3.84 10⁸ metres away from the Earth. The angle subtended at the moon, when seen from two diametrically opposed places on Earth, is 1° 54′.

where F is the gravitational force, G is the gravitational constant (6.6743 x 10⁻¹¹ N*m²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between their centers.

In this case, we are calculating the force that the moon produces on the Earth, so we can set m1 to the mass of the Earth (5.97 x 10²⁴ kg).

F = 6.6743 x 10⁻¹¹ * (5.97 x 10²⁴ kg) * (7.43 x 10²² kg) / (3.88 x 10⁸ m)²

Simplifying the calculation, we get:

F = 1.98 x 10²⁰ N

To know more about gravitational force visit:-

https://brainly.com/question/12528243

#SPJ9

it would take the planet approximately 9.14 years to go all the way around our sky once.

The time it takes for a planet to go all the way around our sky once is called its sidereal period. This is the time it takes for the planet to return to the same position in the sky relative to the fixed stars.

The sidereal period of a planet is related to its orbital period around the Sun, by the following formula:

Sidereal period = Orbital period / (1 - Earth's orbital period / Planet's orbital period)

The Earth's orbital period around the Sun is approximately 1 year. Substituting the given values, we get:

Sidereal period = 8 years / (1 - 1/8)

Sidereal period = 8 years / (7/8)

Sidereal period = 9.14 years (approx)

Learn more about sidereal here:

https://brainly.com/question/29217518

#SPJ1

From 1998 to 2005, the percentage of mothers with infants in the workforce grew considerably. In 1998, 59.5% of mothers with infants were in the labor force and by 2005, that number grew to 68.8%, an increase of 9.3%, according to data from the Bureau of Labor Statistics.

The United States Department of Labor has a division called the Bureau of Labor Statistics (BLS). It functions as a key agency of the U.S. Federal Statistics System and is the primary fact-finding body for the federal government of the United States in the broad field of labour economics and statistics. The American public, the U.S. Congress, other Federal agencies, State and local governments, industry and labour representatives, and the general public are all served by the BLS's collection, processing, analysis, and dissemination of crucial statistical data. The BLS also conducts research on the income levels families require to sustain an acceptable standard of living and acts as a statistical resource for the US Department of Labor.

The largest overall increase was in mothers with infants aged 6 to 11 months. In 1998, 57.7% of this group was in the labor force, but by 2005, that increased to 68.3%.

There was also an increase among mothers with infants aged 0 to 5 months, though it was much smaller. In 1998, 55.4% worked, with that number increasing to 60.2% in 2005. Working mothers with infants aged 12 to 17 months experienced the smallest increase from 1998 to 2005, with the labor force participation rate reaching 71.7%, a 4.4 percentage point increase from 1998.

The fact that more and more mothers are opting to enter the workforce may indicate that the social expectation of mothers’ roles is slowly evolving. The increased availability of daycare, more flexible job positions, and changes in child-rearing practices may have contributed to the increase in mothers entering the workforce.

To know more about labor force, visit:

https://brainly.com/question/13962639

#SPJ1

W=Fd

F=Eq

W=Eqd

E = 2.4 N/C

q = 1.6×10⁻¹⁹ C

d = 20 cm = 0.2 m

W = 2.4(1.6×10⁻¹⁹)(0.2)

W = 7.68×10⁻²⁰ J

Explanation:

I  wavelength

J amplitude

K trough

L crest

M equal

A runner is sprinting at 3 m/s. But 40 seconds later they are sprinting at 3.8 m/s. What is the runner’s acceleration?

We can use the following formula to calculate the acceleration:

a = (vf - vi) / t

where:

a = acceleration

vf = final velocity

vi = initial velocity

t = time

In this case, the initial velocity (vi) is 3 m/s, the final velocity (vf) is 3.8 m/s, and the time (t) is 40 seconds.

So, we can plug these values into the formula and solve for the acceleration:

a = (3.8 m/s - 3 m/s) / 40 s

a = 0.8 m/s^2

Therefore, the runner's acceleration is 0.8 m/s__2__.

Hey, Misha! I see you're working on a physics problem for college. I'd be happy to help you out!

(a) To solve for the temperature increase of the copper block, we can use the equation:

ΔE = mcΔT

Where ΔE is the change in internal energy of the block, m is the mass of the block, c is the specific heat capacity of copper, and ΔT is the change in temperature.

First, we need to find the initial kinetic energy of the block:

KE = 1/2mv^2 = 1/2(1.6 kg)(6.6 m/s)^2 = 35.1 J

Next, we need to find the internal energy absorbed by the block:

ΔE = 0.85(KE) = 0.85(35.1 J) = 29.8 J

Finally, we can solve for ΔT:

ΔT = ΔE/(mc) = (29.8 J)/(1.6 kg)(0.385 J/kg°C) ≈ 47°C

Therefore, the temperature increase of the copper block is approximately 47°C.

(b) The remaining energy is converted into thermal energy and dissipated into the surroundings as heat. It does not vanish from the universe, but rather it is dispersed into the environment.

Kinetic energy is the dependent variable for both Parts, while mass is the independent variable for Part I and speed is the independent variable for Part II.

The variable in an experiment that is not altered by the experimental process is known as the independent variable. In contrast, the variable we must quantify and which is altered by the experimental circumstances is the dependent variable.

An experiment's manipulated variable, also referred to as an independent variable, is a component that you can alter to observe how other factors react. The three categories of factors in an experiment are as follows: Variable that has been altered and controlled based on the trial.

To know more about Kinetic energy visit:-

https://brainly.com/question/26472013

#SPJ1

Question:

In Part I, the independent variable, the one that is intentionally manipulated, is

In Part II, the independent variable changes to

The dependent variable, the one you measure the response in, is the same for Parts I and II. For both parts of the

lab, the dependent variable is

The final temperature is 390 K and the final pressure is 6.46 x [tex]10^{6}[/tex] Pa. The work done by the petrol during compression is 7.20 x 10² J. The air's internal energy changed by -7.20 x 10² J.

The final pressure and temperature can be calculated using the adiabatic compression equation:

To start, here is the last volume:

Vf = Vi / 20.0 = 1.00 × [tex]10^{-3}[/tex] / 20.0 = 5.00 × [tex]10^{-5}[/tex] m³

We may then determine the final pressure by:

1.01 105 Pa * Pf = Pi * (V i / V f) (1.00 × [tex]10^{-3}[/tex] m³ / 5.00 × [tex]10^{-5}[/tex] m³)1.4 = 6.46 × [tex]10^{6}[/tex] Pa

Final temperature = (1 mol × 8.31 J/mol K) / (6.46 106 Pa × 5.00 × [tex]10^{-5}[/tex] m³) = 390 K

The final pressure is therefore 6.46 106 Pa, and the final temperature is 390 K.

The equation: can be used to determine the work performed by the gas during compression.

W = (γ / (γ - 1)) × P i × V i × (1 - (1 / r(γ - 1)))

where P i and V i are the initial pressure and volume, r is the compression ratio (20.0), and is the adiabatic index (1.4 for air).

Inputting the values provided yields:

W = (1.4 / (1.4 - 1)) × 1.01 × [tex]10^{5}[/tex] Pa × 1.00 × [tex]10^{-3}[/tex] m³ × (1 - (1 / 20.0(1.4 - 1))) = 7.20 × 10² J

The first law of thermodynamics can be used to compute the change in internal energy:

ΔU = Q - W

where W is the work performed by the petrol and Q is the heat contributed to the system, which in this instance is adiabatic.

To learn more about adiabatic process visit:

brainly.com/question/14930930

#SPJ1