An irrigation canal with trapezoidal cross-section has the following elements: Bottom width = 2.4 m, depth of water = 0.9 m, side slope = 1.5 horizontal to 1 vertical, slope of canal bed = 0.001. coefficient of roughness = 0.025. The canal will serve clay-loam rice land. 25. What is the hydraulic radius in meters? a. 0.487 c. 0.632 b. 0.748 d. 0.598

The main stakeholders that will be involved in consulting the Menara JLand project are the developer, architect, and construction team.

In the development phase of the project, the developer plays a crucial role as the primary stakeholder. They are responsible for initiating and funding the project, acquiring the necessary permits and approvals, and overseeing the overall progress. The developer also collaborates with the architect and construction team to ensure that the project aligns with their vision and requirements.

The architect is another key stakeholder involved in the project. They are responsible for designing the building's layout, facade, and overall aesthetic appeal. The architect works closely with the developer to understand their goals and preferences, while also considering factors such as functionality, safety, and sustainability. Their expertise helps in creating a visually striking and structurally sound high-rise building.

The construction team is an essential stakeholder that directly implements the design and brings the project to life. This team typically includes contractors, engineers, project managers, and various skilled workers. They are responsible for executing the construction plans, ensuring compliance with building codes and regulations, and managing the day-to-day operations on the construction site.

Overall, the developer, architect, and construction team are the main stakeholders involved in consulting the Menara JLand project. Their collaboration, expertise, and coordination are vital to the successful completion of the project.

Learn more about stakeholders

\brainly.com/question/30241824

#SPJ11

The value of K and r for the given heating system is 0.8222 and 0.2309h-1 respectively. The response equation of the output variable, y(t) is y(t) = K (1 – [tex]e ^{ -rt}[/tex]).

The brewery industries have been one of the most contributing industries in terms of environmental pollution. The waste water from the beer factory contains several dissolved solids and organic matter which are not environmentally safe.

The brewery industries have been focusing on reducing the environmental impact by recycling the waste water or reducing the pollutants.

One such technique used by the breweries is to heat the waste water using heat exchangers and reuse it in the beer making process.

Heat exchangers are an efficient and eco-friendly way of using waste heat for the heating of waste water.

In the present scenario, the temperature of heating water is 45°C with a flow rate of 25 m3/h and inlet temperature of waste water is 10°C with a flow rate of 30 m3/h.

The calculation of K and r values is done as follows.

The heat exchanged by the heating water is equal to the heat absorbed by the waste water. Hence, m (c) (T2-T1) = m (c) (T2-T1). Using the formula,

Q = m c ΔT, we get

Q = 25,000 x 4.2 x (45 - 10)

= 4,725,000 kJ/hour.

The waste water outlet temperature is calculated using the following equation Q = m c ΔT. We have, m = 30,000 kg/hour, c = 4.2 kJ/kg.K and ΔT = (T2 - T1).

Putting in values we get,

4,725,000 = 30,000 x 4.2 x (T2 - 10).

On solving we get T2 = 54.464°C.

The response equation of the output variable is y (t) = K (1 – [tex]e ^{ -rt}[/tex]).

The outlet temperature of the waste water at 5 minutes is calculated using this formula.

The K and r values are calculated using the formulae K = 1 - (10/56.465) = 0.8222 and

r = (1/ (5 ln [(1/0.8222)]))

= 0.2309h-1.

Hence, the outlet temperature of waste water at 5 minutes can be calculated.

Thus, the value of K and r for the given heating system is 0.8222 and 0.2309h-1 respectively. The response equation of the output variable, y(t) is y(t) = K (1 – [tex]e ^{ -rt}[/tex]). The outlet temperature of the waste water at 5 minutes is 52.643°C.

A food liquid with a specific temperature of 4 kJ / kg m, flows through an inner tube of a heat exchanger. If the liquid enters the heat exchanger at a temperature of 20 ° C and exits at 60 ° C, then the flow rate of the liquid is 0.5 kg / s.

The heat exchanger enters in the opposite direction, hot water at a temperature of 90 ° C and a flow rate of 1 kg. / a second.

Specific heat of water is 4.18 kJ/kg/m.

The following are the steps to calculate the different values.

Calculation of the temperature of the water leaving the heat exchangerWe know that

Q(food liquid) = Q(water) [Heat transferred by liquid = Heat transferred by water]

Here, m(food liquid) = 0.5 kg/s

ΔT1 = T1,out − T1,in

= 60 − 20

= 40 °C [Temperature difference of food liquid]

Cp(food liquid) = 4 kJ/kg

m [Specific heat of food liquid]m(water) = 1 kg/s

ΔT2 = T2,in − T2,out

= 90 − T2,out [Temperature difference of water]

Cp(water) = 4.18 kJ/kg

mQ = m(food liquid) × Cp(food liquid) × ΔT1

= m(water) × Cp(water) × ΔT2

Q = m(food liquid) × Cp(food liquid) × (T1,out − T1,in)

= m(water) × Cp(water) × (T2,in − T2,out)

= 32.80 C

Calculation of the logarithmic mean of the temperature difference

ΔTlm = [(ΔT1 − ΔT2) / ln(ΔT1/ΔT2)]

ΔTlm = 27.81 C

Here, Ui = 2000 W/m²°C [Total average heat transfer coefficient]

D = 0.05 m [Inner diameter of the heat exchanger]

A = πDL [Area of the heat exchanger]

L = ΔTlm / (UiA) [Length of the heat exchanger]

A = π × 0.05 × L

= 314 × L

Length of the heat exchanger, L = 0.0888 m

Here, m(food liquid) = 0.5 kg/sCp(food liquid) = 4 kJ/kg m

ΔT1 = 40 °C

Qmax = m(food liquid) × Cp(food liquid) × ΔT1

Qmax = 0.5 × 4 × 40

= 80 kJ/s

Efficiency, ε = Q / Qmax

ε = 6 / 80

= 0.075 or 7.5 %

We know that U = 2000 W/m²°C [Total average heat transfer coefficient]

D = 0.05 m [Inner diameter of the heat exchanger]

A = πDL [Area of the heat exchanger]

m(water) = 68/60 kg/s

ΔT1 = 40 °C [Temperature difference of food liquid]

Cp(water) = 4.18 kJ/kg m

ΔT2 = T2,in − T2,out

= 40 °C [Temperature difference of water]

Q = m(water) × Cp(water) × ΔT2 = 68/60 × 4.18 × 40

= 150.51 kW

Here, Q = UA × ΔTlm

A = πDL

A = Q / (U × ΔTlm)

A = 2.13 m²

L = A / π

D= 2.13 / π × 0.05

= 13.52 m

The given problem is related to heat transfer in a heat exchanger. We use different parameters such as the temperature of the water leaving the heat exchanger, the logarithmic mean of the temperature difference, the length of the heat exchanger, the efficiency of the exchanger, and the length of the heat exchanger for the parallel type to solve the problem.

To know more about temperature visit:

brainly.com/question/7510619

#SPJ11

An increase in temperature leads to an increase in the molecular velocity of gases because higher temperature causes greater molecular motion and collision.

An increase in molecular velocity, in turn, leads to more frequent and harder collisions between gas molecules and the walls of the container, causing an increase in the force of collisions. In a closed system that cannot expand, an increase in pressure is observed due to the more frequent and harder collisions that are taking place between the gas molecules and the walls of the container.

The volume change in a system that can expand and contract, but whose pressure is constant, will increase upon an increase in temperature of the system. The increase in temperature results in an increase in molecular velocity and a corresponding increase in kinetic energy of the molecules. Due to this kinetic energy, the molecules move farther apart from one another, causing the volume of the system to increase.

To know more about visit:

https://brainly.com/question/29062095

#SPJ11

The question states that one number is twelve less than another number, and the average of the two numbers is 96. We need to find the smaller of the two numbers. Hence the smaller of the two numbers is 90.

Let's call the larger number "x" and the smaller number "y". According to the information given, we know that:

x = y + 12 (since one number is twelve less than the other)

The average of the two numbers is 96, so we can set up the equation:

(x + y) / 2 = 96

Now we can substitute the value of x from the first equation into the second equation:

((y + 12) + y) / 2 = 96

Simplifying the equation:

(2y + 12) / 2 = 96
2y + 12 = 192
2y = 192 - 12
2y = 180
y = 180 / 2
y = 90

Therefore, the smaller of the two numbers is 90.

To know more about "Average":

https://brainly.com/question/130657

#SPJ11

Answer: x > -1.5

I'm not sure if the variable you have is an x, but it will still be the same answer- just replace the variable with whatever one you have.

If you need the answer in a fraction, let me know.

And in case your number isn't a variable, any number MORE THAN, or GREATER THAN -1.5, will be correct.
Possible answers:
2 > -1.5
14 > -1.5
-1 > -1.5

Explanation: The open circle indicates that the sign is either less then (<) or greater than (>). If the circle was closed, it would then indicate less than or equal to, or greater than or equal to.
The open circle is at -1.5, and is going to the right. Meaning all the possible answers are higher or greater than -1.5.

Hope this helps! :)

The Harmonic waves shown that ψ(x, t) = A × sin(k(x - vt)) satisfies the wave equation.

To show that ψ(x, t) = A ×sin(k(x - vt)) is a solution of the wave equation, to demonstrate that it satisfies the wave equation:

∂²ψ/∂t² = v² ∂²ψ/∂x²

Let's calculate the derivatives and substitute them into the wave equation.

First, find the partial derivatives with respect to t:

∂ψ/∂t = -Akv × cos(k(x - vt)) (using the chain rule)

∂²ψ/∂t² = Ak²v² × sin(k(x - vt)) (taking the derivative of the above result)

Next find the partial derivatives with respect to x:

∂ψ/∂x = Ak × cos(k(x - vt))

∂²ψ/∂x² = -Ak² × sin(k(x - vt)) (taking the derivative of the above result)

Now, substitute these derivatives into the wave equation:

v² ∂²ψ/∂x² = v² × (-Ak² × sin(k(x - vt))) = -Akv²k² ×sin(k(x - vt))

∂²ψ/∂t² = Ak²v² × sin(k(x - vt))

Comparing the two expressions, that they are equal:

v² ∂²ψ/∂x² = ∂²ψ/∂t²

To know more about equation here

https://brainly.com/question/29538993

#SPJ4

Answer:

7c + 2

Step-by-step explanation:

4(c + 5) + 3(c - 6)

= 4c + 20 + 3c - 18

= (4c + 3c) + 20 - 18

= 7c + 2

Answer:7c - 2

Step-by-step explanation:

4(c+5) + 3(c-6)

4c + 20 + 3c - 18

4c+ 3c+ 20 - 18

7c + 2

The area of triangle EFG, to the nearest square inch, is approximately 1061 square inches.

To find the area of triangle EFG, we can use the formula:

[tex]Area = (1/2) \times base \times height[/tex]

In this case, the base of the triangle is FG, and the height is the perpendicular distance from vertex E to side FG.

First, let's find the length of FG. We can use the law of cosines:

FG² = EF² + EG² - 2 * EF * EG * cos(∠F)

EF = 72 inches

EG = 34 inches

∠F = 21°

Plugging these values into the equation:

FG² = 72² + 34² - 2 * 72 * 34 * cos(21°)

Solving for FG, we get:

FG ≈ 83.02 inches

Next, we need to find the height. We can use the formula:

height = [tex]EF \times sin( \angle F)[/tex]

Plugging in the values:

height = 72 * sin(21°)

height ≈ 25.52 inches

Now we can calculate the area:

[tex]Area = (1/2) \times FG \times height\\Area = (1/2)\times 83.02 \times 25.52[/tex]

Area ≈ 1060.78 square inches

For more such questions on triangle

https://brainly.com/question/1058720

#SPJ8

By following these steps, you should be able to calculate the concentrations of [H3PO4], [H2PO4-1], [HPO4-2], and [PO4-3], as well as the concentration and KSP of [Ca3(PO4)2], and solve for Ka1, Ka2, and Ka3.

To solve for the concentration of [H3PO4], [H2PO4-1], [HPO4-2], and [PO4-3], we need to consider the acid dissociation of phosphoric acid (H3PO4). Phosphoric acid has three dissociation constants (Ka1, Ka2, and Ka3) corresponding to the three hydrogen ions it can release.

1. We start by writing the dissociation reactions for each step:

H3PO4 ⇌ H+ + H2PO4-
H2PO4- ⇌ H+ + HPO4-2
HPO4-2 ⇌ H+ + PO4-3

2. We'll assume that initially, the concentration of [H3PO4] is 150 M (as stated in the question). Since we have a pH of 8, we can calculate the [H+] using the equation pH = -log[H+]. In this case, the [H+] concentration is 10^-8 M.

3. Now, we'll use the equilibrium expression for each dissociation reaction to calculate the concentrations of [H2PO4-1], [HPO4-2], and [PO4-3].

For the reaction H3PO4 ⇌ H+ + H2PO4-, the equilibrium constant (Ka1) is given by [H+][H2PO4-] / [H3PO4]. Since we know [H3PO4] = 150 M and [H+] = 10^-8 M, we can rearrange the equation to solve for [H2PO4-]. Substitute the given values to find the concentration of [H2PO4-1].

Similarly, for the reactions H2PO4- ⇌ H+ + HPO4-2 and HPO4-2 ⇌ H+ + PO4-3, we can calculate the concentrations of [HPO4-2] and [PO4-3] using their respective equilibrium expressions.

4. Next, we can calculate the concentration and KSP of [Ca3(PO4)2] using the solubility product constant (KSP). The balanced equation for the dissolution of [Ca3(PO4)2] is:

3Ca3(PO4)2 ⇌ 9Ca2+ + 6PO4-3

Since [PO4-3] is calculated in the previous step, we can multiply it by 6 to get the concentration of [Ca2+] ions. The concentration of [Ca2+] is then used to calculate the KSP using the expression:

KSP = [Ca2+]^9 * [PO4-3]^6

5. Finally, we solve for Ka1, Ka2, and Ka3. The Ka values represent the equilibrium constants for each acid dissociation reaction.

Using the concentrations of [H+], [H2PO4-1], [HPO4-2], and [PO4-3] obtained earlier, we can calculate Ka1, Ka2, and Ka3 using the equilibrium expressions for the respective reactions.

Remember to substitute the correct concentrations into each equation to find the Ka values.

By following these steps, you should be able to calculate the concentrations of [H3PO4], [H2PO4-1], [HPO4-2], and [PO4-3], as well as the concentration and KSP of [Ca3(PO4)2], and solve for Ka1, Ka2, and Ka3.

learn more about concentrations on :

https://brainly.com/question/17206790

#SPJ11

The concentrations of [H₃PO₄], [H₂PO₄-1], [HPO₄-2], and [PO₄-3], as well as the concentration and KSP of [Ca₃(PO₄)₂], and solve for Ka1, Ka2, and Ka3.

By following these steps, you should be able to calculate the concentrations of [H₃PO₄], [H₂PO₄-1], [HPO₄-2], and [PO₄-3], as well as the concentration and KSP of [Ca₃(PO₄)₂], and solve for Ka1, Ka2, and Ka3.

To solve for the concentration of [H₃PO₄], [H₂PO₄-1], [HPO₄-2], and [PO₄-3], we need to consider the acid dissociation of phosphoric acid (H₃PO₄).

Phosphoric acid has three dissociation constants (Ka1, Ka2, and Ka3) corresponding to the three hydrogen ions it can release.

1. We start by writing the dissociation reactions for each step:

H₃PO₄ ⇌ H+ + H₂PO₄-

H₂PO₄- ⇌ H+ + HPO₄-2

HPO₄-2 ⇌ H+ + PO₄-3

2. We'll assume that initially, the concentration of [H₃PO₄] is 150 M (as stated in the question). Since we have a pH of 8, we can calculate the [H⁺] using the equation pH = -log[H⁺]. In this case, the [H⁺] concentration is 10⁻⁸ M.

3. Now, we'll use the equilibrium expression for each dissociation reaction to calculate the concentrations of [H₂PO₄-1], [HPO₄-2], and [PO₄-3].

For the reaction H₃PO₄ ⇌ H+ + H₂PO₄-, the equilibrium constant (Ka1) is given by [H⁺][H₂PO₄-] / [H₃PO₄]. Since we know [H₃PO₄] = 150 M and [H⁺] = 10⁻⁸ M, we can rearrange the equation to solve for [H₂PO₄-]. Substitute the given values to find the concentration of [H₂PO₄-1].

Similarly, for the reactions H₂PO₄- ⇌ H+ + HPO₄-2 and HPO₄-2 ⇌ H+ + PO4-3, we can calculate the concentrations of [HPO₄-2] and [PO₄-3] using their respective equilibrium expressions.

4. Next, we can calculate the concentration and KSP of [Ca₃(PO₄)₂] using the solubility product constant (KSP). The balanced equation for the dissolution of [Ca₃(PO₄)₂] is:

3Ca₃(PO₄)₂ ⇌ 9Ca₂+ + 6PO₄-3

Since [PO₄-3] is calculated in the previous step, we can multiply it by 6 to get the concentration of [Ca²⁺] ions. The concentration of [Ca²⁺] is then used to calculate the KSP using the expression:

KSP = [Ca²⁺]⁹ * [PO₄-3]⁶

5. Finally, we solve for Ka1, Ka2, and Ka3. The Ka values represent the equilibrium constants for each acid dissociation reaction.

Using the concentrations of [H⁺], [H₂PO₄-1], [HPO₄-2], and [PO₄-3] obtained earlier, we can calculate Ka1, Ka2, and Ka3 using the equilibrium expressions for the respective reactions.

Remember to substitute the correct concentrations into each equation to find the Ka values.

By following these steps, you should be able to calculate the concentrations of [H₃PO₄], [H₂PO₄-1], [HPO₄-2], and [PO₄-3], as well as the concentration and KSP of [Ca₃(PO₄)₂], and solve for Ka1, Ka2, and Ka3.

learn more about concentrations on :

brainly.com/question/17206790

#SPJ11

(1) The relative humidity is 60%.

(2) The temperature of the air parcel is Tdp ≈ 51.0 °F.

(3) LCL ≈ 1.82 km or 1820 meters

(4) The temperature at 6000 meters is 52.63 °F.

(5) SH at 6000 meters is 3.58 g/kg.

(6) Parcel temperature at 1000 meters is 35.13 °F.

Given data at sea level (ground):

(1) Calculate the Relative Humidity (RH) on the ground.

To calculate RH, we need to know the saturation-specific humidity at the given temperature.

The saturation-specific humidity (5Hs) at 59.0 °F can be found using a particular table of humidity or formula. However, since I don't have access to the internet for real-time calculations, let's assume the specific humidity at saturation is 9 g/kg at 59.0 °F.

Now we can calculate the RH on the ground:

RH = (SH / SHs) x 100

RH = (5.4 g/kg / 9 g/kg) x 100

RH ≈ 60%

(2) Calculate the Dew Point Temperature (Tdp) on the ground.

To calculate the dew point temperature, we can use the following approximation formula:

[tex]Tdp = T - (\dfrac{(100 - RH)} { 5}[/tex]

Where Tdp is in °F, T is the temperature in °F, and RH is the relative humidity in percentage.

[tex]Tdp = 59.0 - \dfrac{(100 - 60) }{5}\\Tdp = 59.0 - \dfrac{40} { 5}\\Tdp = 59.0 - 8\\Tdp = 51.0 ^oF[/tex]

(3) Calculate the Lifted Condensation Level (LCL) on the ground.

The LCL is where the air parcel would start to condense if lifted.

[tex]LCL = \dfrac{(T - Tdp)} { 4.4}\\LCL = \dfrac{(59.0 - 51.0)} { 4.4}\\LCL = \dfrac{8.0} { 4.4}\\LCL = 1.82 km or 1820 meters[/tex]

(4) Lift the air parcel to 6000 meters (approximately 19685 feet).

The temperature decreases with height at a rate of around 3.5 °F per 1000 feet (or 6.4 °C per 1000 meters) in the troposphere. Let's calculate the temperature at 6000 meters.

Temperature at 6000 meters ≈ T on the ground - (LCL height / 1000) x temperature lapse rate

[tex]T= 59.0 - \dfrac{1820} { 1000} \times 3.5\\T= 59.0 - 6.37\\T= 52.63 ^oF[/tex]

(5) Calculate the specific humidity (5H) at 6000 meters.

Assuming specific humidity decreases linearly with height, we can calculate it using the formula:

SH at 6000 meters ≈ SH on the ground - (LCL height / 1000) * specific humidity lapse rate

Let's assume a specific humidity lapse rate of 1 g/kg per 1000 meters.

[tex]SH = 5.4 - \dfrac{1820} { 1000} \times 1\\SH = 5.4 - 1.82\\SH = 3.58 \dfrac{g}{kg}[/tex]

(6) The parcel descends from 6000 meters to 1000 meters.

We will assume the dry adiabatic lapse rate, which is 3.5 °F per 1000 feet (or 6.4 °C per 1000 meters).

Temperature change during descent ≈ (6000 - 1000) * temperature lapse rate

[tex]\Delta T= 5000 \times \dfrac{3.5} { 1000}\\\Delta T= 17.5 ^oF[/tex]

Parcel temperature at 1000 meters ≈ Temperature at 6000 meters - Temperature change during descent

Parcel temperature at 1000 meters ≈ 52.63 - 17.5

Parcel temperature at 1000 meters ≈ 35.13 °F

To know more about the properties of air follow

https://brainly.com/question/14298203

#SPJ4

Minerals and rocks are essential natural resources that are of great significance to civil engineers.

These resources provide necessary information about the earth's geological history, composition, and formation. Civil engineers rely on rocks and minerals for a variety of purposes, including exploration, site development, and construction.

In conclusion, the importance of minerals and rocks to the civil engineer cannot be overemphasized. These resources provide valuable data that is essential in exploration, site development, and construction.

They are critical to the development of infrastructure and public works. Civil engineers should always take into account the geological information of an area to ensure that their projects are structurally sound, safe, and long-lasting.

To know more about Minerals visit :

https://brainly.com/question/30903981

#SPJ11

The Complete Question :  

Question 1: Why The Geology Is Important For The Civil Engineering? Question 2: What is the important of minerals and rocks to the civil engineer ?

Question 3: What is the role of Geology in selection on Dam site ?

Question 4: What Geological features the engineer should consider before the tunnel design ?

Question 5: what are the main steps of ground investigation ?

Minerals and rocks are of great importance to civil engineers in terms of providing construction materials, ensuring stability and durability of structures, conducting geotechnical investigations, managing mineral resources, and promoting environmental sustainability.

The importance of minerals and rocks to civil engineers is significant. Here are some key points:

1. Construction materials: Minerals and rocks are essential for constructing buildings, roads, bridges, and other infrastructure. For example, limestone and granite are commonly used as aggregates in concrete production, while sandstone and basalt can be used for building facades. Understanding the properties and characteristics of different rocks and minerals helps civil engineers select the most suitable materials for specific projects.

2. Stability and durability: Civil engineers need to ensure that structures are stable and durable over time. Minerals and rocks play a crucial role in achieving this. For instance, rocks such as granite and basalt are known for their strength and can provide a stable foundation for buildings and bridges. Additionally, minerals like gypsum and limestone can enhance the durability of concrete structures by reducing the risk of cracking and corrosion.

3. Geotechnical investigations: Before construction begins, civil engineers conduct geotechnical investigations to assess the soil and rock conditions at a site. This involves studying the composition, strength, and stability of the ground. Understanding the mineralogy and geological characteristics of rocks helps engineers determine the appropriate foundation design, excavation techniques, and slope stability measures.

4. Mineral resources: Civil engineers often work in areas rich in mineral resources. Understanding the geological formations and mineral deposits is crucial for planning and implementing mining and extraction activities. Civil engineers may need to consider the impact of mining operations on the surrounding environment and ensure the proper management of waste materials.

5. Environmental considerations: Civil engineers have a responsibility to minimize the environmental impact of their projects. This includes considering the sourcing of construction materials. By understanding the availability and suitability of local rocks and minerals, engineers can reduce transportation distances, lower carbon emissions, and promote sustainable construction practices.

Learn more about Minerals

https://brainly.com/question/29970865

#SPJ11

Lipid synthesis and storage primarily occur in the adipose tissue, liver, and muscle.

Lipids are synthesized and stored in the adipose tissue, liver, and muscle. Adipose tissue is specialized connective tissue that serves as a primary storage site for excess energy in the form of lipids. The liver, on the other hand, produces triglycerides that are either stored or released into the bloodstream as lipoproteins.

Skeletal muscles can also synthesize and store lipids, although to a lesser extent than adipose tissue or the liver. The kidneys, unlike the other organs, do not play a significant role in lipid synthesis or storage. Overall, the adipose tissue, liver, and muscle are the primary organs responsible for lipid synthesis and storage in the human body.

Learn more about lipids here:

https://brainly.com/question/1704581

#SPJ11

(a) The interval of convergence is [-4, 6].

(b) The series converges absolutely for all values within the interval [-4, 6].

(c) The series does not converge conditionally as it converges absolutely for all values within the interval.

To find the series' radius and interval of convergence for the given series [tex]$\sum_{n=0}^\infty \frac{(x-1)^n}{5}$[/tex]:

(a) We can use the ratio test to determine the radius of convergence. Let's apply the ratio test:

[tex]$\lim_{n\to\infty} \left|\frac{(x-1)^{n+1}/5}{(x-1)^n/5}\right|$[/tex]

Taking the absolute value and simplifying, we have:

[tex]$\lim_{n\to\infty} \left|\frac{x-1}{5}\right|$[/tex]

For the series to converge, the limit must be less than 1. Therefore, we have:

[tex]$\left|\frac{x-1}{5}\right| < 1$[/tex]

Simplifying, we get:

[tex]$|x-1| < 5$[/tex]

This inequality indicates that the distance between x and 1 should be less than 5. Therefore, the radius of convergence is 5.

To determine the interval of convergence, we need to consider the endpoints of the interval.

When x-1 = 5, we have x = 6, which is the right endpoint of the interval.

When x-1 = -5, we have x = -4, which is the left endpoint of the interval.

Therefore, the interval of convergence is [-4, 6], including -4 and 6.

(a) The interval of convergence is [-4, 6].

(b) For what values of x does the series converge absolutely?

The series converges absolutely within the interval of convergence, which is [-4, 6].

(c) For what values of x does the series converge conditionally?

Since the series converges absolutely for all values within the interval of convergence [-4, 6], there are no values for which the series converges conditionally.

Learn more about interval of convergence

https://brainly.com/question/32443084

#SPJ11

The description of points A, B, and C in Figure Q2(c) can be determined based on the provided information. Point A represents the point of intersection on the two-lane road in mountainous terrain. Point B refers to the end of the tangent length, while Point C represents the station along the road. The design speed of the vehicle to travel at this curve can be calculated using the given data. The distance of point A can be determined using the intersection angle and tangent length. Finally, the station of point C can be found based on the provided information.

Point A represents the point of intersection, point B is the end of the tangent length, and point C represents the station along the road. The design speed of the vehicle can be calculated using the provided data, and the distance of point A can be determined using the intersection angle and tangent length. The station of point C can be found based on the given information.

Learn more about Curve Design :

https://brainly.com/question/30760797

#SPJ11

The length of one side of a square face of the cube is 5 inches.

A cube has six square faces, and the total surface area of a cube is the sum of the areas of all its faces.

Given that the net of the cube has a total surface area of 150 in², we can divide this by 6 to find the area of each square face.

150 in² / 6 = 25 in²

Since all the faces of a cube are congruent squares, the area of each face is equal to the side length squared. Therefore, we can set up the equation:

side length² = 25 in²

To find the length of one side of a square face, we take the square root of both sides:

√(side length²) = √(25 in²)

side length = 5 in

Consequently, the cube's square face's length on one side is 5 inches.

for such more question on length

https://brainly.com/question/20339811

#SPJ8

(a)way(s): The program can be arranged in 120 different ways.

(b)way(s): The program can be arranged in 40 different ways if a sonata must come first.

In order to calculate the number of ways the program can be arranged, we need to consider the total number of works (6) and their respective categories (3 overtures, 2 sonatas, and 1 piano concerto).

(a) To find the total number of ways the program can be arranged without any specific conditions, we multiply the number of options for each category. In this case, we have 3 choices for the overtures, 2 choices for the sonatas, and 1 choice for the piano concerto. Therefore, the total number of arrangements is 3 * 2 * 1 = 6.

(b) If a sonata must come first, we have one fixed position for the sonata. Therefore, we only need to consider the remaining 5 works. The overtures can be arranged in 3! = 3 * 2 * 1 = 6 ways, and the piano concerto can be placed in the last position. Thus, the total number of arrangements is 6 * 1 = 6.

Learn more about sonata

brainly.com/question/32699741

#SPJ11

The equation for the height of water in the tank is: h = (3g + (1/2)v^2)/(2g)

To find the equation for the height of water in the tank, we need to use the principles of fluid mechanics and Bernoulli's equation.

Step 1: Determine the velocity of water coming out of the orifice.
The velocity (v) can be calculated using Torricelli's law, which states that the velocity of fluid flowing out of an orifice is given by the equation:
v = √(2gh)
where g is the acceleration due to gravity (approximately 9.8 m/s^2) and h is the height of the water in the tank.

Step 2: Calculate the cross-sectional area of the orifice.
The cross-sectional area (A) can be calculated using the formula for the area of a circle:
A = πr^2, where r is the radius of the orifice. Since the diameter (d) is unknown, we can express the radius in terms of the diameter:
r = d/2.

Step 3: Apply Bernoulli's equation.
Bernoulli's equation states that the sum of the pressure energy, kinetic energy, and potential energy per unit volume of a fluid remains constant along a streamline. In this case, the streamline is the water flowing out of the orifice.
Applying Bernoulli's equation between the water surface in the tank and the orifice, we can write:
P/ρ + gh + (1/2)ρv^2 = P0/ρ + 0 + 0
where P is the pressure at the water surface in the tank, ρ is the density of water, v is the velocity of water coming out of the orifice, P0 is the atmospheric pressure, and the terms involving kinetic energy and potential energy have been simplified based on the given conditions.

Step 4: Simplify the equation.
Since the orifice is at the bottom of the tank, the height of the water in the tank can be expressed as (3 - h), where h is the height of water above the orifice.
By substituting the values and rearranging the equation, we can solve for h:
P/ρ + g(3 - h) + (1/2)ρv^2 = P0/ρ
g(3 - h) + (1/2)v^2 = (P0 - P)/ρ

Step 5: Calculate the pressure difference.
The pressure difference (P0 - P) can be calculated using the hydrostatic pressure equation:
P0 - P = ρgh

Step 6: Substitute the pressure difference and simplify the equation.
Substituting the value of (P0 - P) and simplifying the equation, we get:
g(3 - h) + (1/2)v^2 = gh

Step 7: Solve for h.
By rearranging the equation, we can solve for h:
3g - gh + (1/2)v^2 = gh
2gh = 3g + (1/2)v^2
h = (3g + (1/2)v^2)/(2g)

Therefore, the equation for the height of water in the tank is:
h = (3g + (1/2)v^2)/(2g), where g is the acceleration due to gravity (approximately 9.8 m/s^2) and v is the velocity of water coming out of the orifice.

To learn more about equation

https://brainly.com/question/29174899

#SPJ11

Answer: tv = 20 and ut=62

Step-by-step explanation:

There are 96.00 g of oxygen in 43.1 g of copper (II) nitrate.

a. To calculate the number of grams of oxygen in 12.7 g of carbon dioxide [tex](CO_2),[/tex] we first need to determine the molar mass of  [tex](CO_2),[/tex].

The molar mass of carbon (C) is approximately 12.01 g/mol, and the molar mass of oxygen (O) is approximately 16.00 g/mol.

Molar mass of [tex](CO_2),[/tex]= 12.01 g/mol (C) + 2 [tex]\times[/tex] 16.00 g/mol (O) = 44.01 g/mol

Now, we can use the molar mass of CO2 to find the grams of oxygen:

Mass of oxygen in  [tex](CO_2),[/tex] = (Number of moles of oxygen) [tex]\times[/tex] (Molar mass of oxygen).

Mass of oxygen in [tex](CO_2),[/tex] = (2 moles) [tex]\times[/tex] (16.00 g/mol) = 32.00 g

Therefore, there are 32.00 g of oxygen in 12.7 g of carbon dioxide.

b. To calculate the grams of oxygen in 43.1 g of copper (II) nitrate [tex](Cu(NO_3)_2),[/tex] we first need to determine the molar mass of [tex](Cu(NO_3)_2),[/tex]

Molar mass of Cu(NO3)2 = molar mass of copper (Cu) + 2 [tex]\times[/tex] (molar mass of nitrogen (N) + 3 [tex]\times[/tex] molar mass of oxygen (O))

Molar mass of [tex](Cu(NO_3)_2)[/tex] = 63.55 g/mol (Cu) + 2 [tex]\times[/tex] (14.01 g/mol (N) + 3 [tex]\times[/tex] 16.00 g/mol (O))

Molar mass of [tex]Cu(NO_3)_2[/tex] = 63.55 g/mol + 2 [tex]\times[/tex] (14.01 g/mol + 48.00 g/mol) = 187.63 g/mol.

Now, we can use the molar mass of [tex]Cu(NO_3)_2[/tex] to find the grams of oxygen:

mass of oxygen)

Mass of oxygen in [tex]Cu(NO_3)_2[/tex] = (6 moles) [tex]\times[/tex] (16.00 g/mol) = 96.00 g.

For similar question on oxygen.

https://brainly.com/question/15457775  

#SPJ8

Answer:

4

Step-by-step explanation:

1) Since we know what points the line passes through, (0,1) and (1,3) we can put it into the formula to calculate the slope. The formula is y1-y2/x1-x2.

2) Input the numbers. 1-3/0-1

3) Calculate the expression, 1-3/0-1=-2/-1=2. The answer is 4

(i) A sequence {an} of negative numbers such that limn→∞ an = -∞ is the sequence of negative powers of 2, an = 2^-n.

(ii) An increasing function ƒ : (-1, 1)→ R such that limx→0+ f(x) = 1 and limx→0- f(x) = -1 is the function f(x) = |x|.

(iii) A continuous function ƒ : (-1, 1) → R such that ƒ(0) = 0, ƒ'(0+) = 2, and ƒ'(0-) = 3 is the function f(x) = x^2.

(iv) A discontinuous function f : [-1, 1] → R such that ∫_-1^1 f(t)dt = -1 is the function f(x) = |x| if x is not equal to 0, and f(0) = 0.

(i) The sequence of negative powers of 2, an = 2^-n, converges to 0 as n goes to infinity. However, since the terms of the sequence are negative, the limit of the sequence is -∞.

(ii) The function f(x) = |x| is increasing on the interval (-1, 1). As x approaches 0 from the positive direction, f(x) approaches 1. As x approaches 0 from the negative direction, f(x) approaches -1.

(iii) The function f(x) = x^2 is continuous on the interval (-1, 1). The derivative of f(x) at x = 0 is 2 for x > 0, and 3 for x < 0.

(iv) The function f(x) = |x| is discontinuous at x = 0. The integral of f(x) from -1 to 1 is -1.

Learn more about powers here: brainly.com/question/11983329

#SPJ11

The critical numbers of f(x) = x^2e^21 are x = 0 and x = -2/21. f(x) is increasing on (-∞, A) and (B, ∞), and decreasing on (A, B).

To find the critical numbers of the function f(x) = x^2e^21, we need to determine the values of x where the derivative of f(x) is equal to zero or undefined.

First, let's calculate the derivative of f(x):

f'(x) = 2xe^21 + x^2(21e^21)

Setting f'(x) equal to zero:

2xe^21 + x^2(21e^21) = 0

Since e^21 is a positive constant, we can divide both sides of the equation by e^21:

2x + 21x^2 = 0

Now, let's factor out x:

x(2 + 21x) = 0

Setting each factor equal to zero:

x = 0 or 2 + 21x = 0

For the second equation, solving for x gives:

21x = -2

x = -2/21

So, the critical numbers of f(x) are x = 0 and x = -2/21.

Now, let's analyze the intervals and determine whether f(x) is increasing or decreasing on each interval.

For (-∞, A), where A = -2/21:

Since A is to the left of the critical number 0, we can choose a test value between A and 0, for example, x = -1. Plugging this test value into the derivative f'(x), we get:

f'(-1) = 2(-1)e^21 + (-1)^2(21e^21) = -2e^21 + 21e^21 = 19e^21

Since 19e^21 is positive (e^21 is always positive), f'(-1) is positive. This means that f(x) is increasing on the interval (-∞, A).

For (A, B), where A = -2/21 and B = 0:

Since A is to the left of B, we can choose a test value between A and B, for example, x = -1/21. Plugging this test value into the derivative f'(x), we get:

f'(-1/21) = 2(-1/21)e^21 + (-1/21)^2(21e^21) = -2/21e^21 + 1/21e^21 = -1/21e^21

Since -1/21e^21 is negative (e^21 is always positive), f'(-1/21) is negative. This means that f(x) is decreasing on the interval (A, B).

For (B, ∞), where B = 0:

Since B is to the right of the critical number 0, we can choose a test value greater than B, for example, x = 1. Plugging this test value into the derivative f'(x), we get:

f'(1) = 2(1)e^21 + (1)^2(21e^21) = 2e^21 + 21e^21 = 23e^21

Since 23e^21 is positive (e^21 is always positive), f'(1) is positive. This means that f(x) is increasing on the interval (B, ∞).

In summary:

The critical numbers of f(x) are x = 0 and x = -2/21.

On the interval (-∞, A) where A = -2/21, f(x) is increasing.

On the interval (A, B) where A = -2/21 and B = 0, f(x) is decreasing.

On the interval (B, ∞) where B = 0, f(x) is increasing.

To learn more about derivative  click here

brainly.com/question/29144258

#SPJ11

Failure is not expected at the critical point in the aluminum casting for the given stress state. The shearing stress τ0 for which failure should be expected is ±0 ksi.

The state of plane stress in an aluminum casting can be analyzed using Mohr's criterion to determine the shearing stress τ0 for which failure should be expected. Mohr's criterion states that failure occurs when the maximum normal stress σmax exceeds the ultimate tensile strength σUT or when the minimum normal stress σmin falls below the ultimate compressive strength σUC.
Given the values:
σx = 6 ksi (maximum normal stress)
σUT = 10 ksi (ultimate tensile strength)
σUC = 25 ksi (ultimate compressive strength)
To find the shearing stress τ0 for which failure should be expected, we can follow these steps:
Step 1: Calculate the mean normal stress σavg:
σavg = (σmax + σmin) / 2
σavg = (6 ksi + (-σmin)) / 2
σavg = (6 ksi - σmin) / 2
Step 2: Calculate the difference in normal stresses Δσ:
Δσ = (σmax - σmin)
Δσ = (6 ksi - (-σmin))
Δσ = (6 ksi + σmin)
Step 3: Apply Mohr's criterion to determine failure condition:
Failure occurs when σavg + (Δσ/2) > σUT or when σavg - (Δσ/2) < -σUC
For failure to occur, either of these conditions must be met.
Condition 1: σavg + (Δσ/2) > σUT
(6 ksi - σmin) / 2 + (6 ksi + σmin) / 2 > 10 ksi
Simplifying the equation:
6 ksi - σmin + 6 ksi + σmin > 20 ksi
12 ksi > 20 ksi
This condition is not met.
Condition 2: σavg - (Δσ/2) < -σUC
(6 ksi - σmin) / 2 - (6 ksi + σmin) / 2 < -25 ksi
Simplifying the equation:
6 ksi - σ[tex]min[/tex] - 6 ksi - σ[tex]min[/tex] < -50 ksi
-2σ[tex]min[/tex] < -50 ksi
σ[tex]min[/tex] > 25 ksi/2
σ[tex]min[/tex] > 12.5 ksi
Since the condition σmin > 12.5 ksi is not met, failure does not occur.
Therefore, failure is not expected at the critical point in the aluminum casting for the given stress state. The shearing stress τ0 for which failure should be expected is ±0 ksi.

To learn more about Stress

https://brainly.com/question/30734635

#SPJ11

Therefore, the minimum mass of ice at 0 °C that must be added to the diet cola is approximately 425.8 grams.

To calculate the minimum mass of ice needed to cool the diet cola, we need to determine the heat transfer that occurs during the cooling process.

First, let's calculate the heat transfer when the diet cola cools from 20.0 °C to 0.0 °C.

The formula for heat transfer is:

Q = mcΔT

Where:

Q = heat transfer (in joules)

m = mass (in grams)

c = specific heat capacity (in J/g-K)

ΔT = change in temperature (in °C)

Given:

Initial temperature (T1) = 20.0 °C

Final temperature (T2) = 0.0 °C

Specific heat capacity of water (c) = 4.184 J/g-K

Using the formula, we have:

Q1 = mcΔT1

Q1 = (340 g) * (4.184 J/g-K) * (20.0 °C - 0.0 °C)

Q1 = 28355.2 J

Next, let's calculate the heat transfer during the phase change of ice to water at 0.0 °C.

The formula for heat transfer during a phase change is:

Q = m * ΔHf

Where:

Q = heat transfer (in joules)

m = mass (in grams)

ΔHf = heat of fusion (in J/g)

Given:

Heat of fusion of water (ΔHf) = 333 J/g

Using the formula, we have:

Q2 = m * ΔHf

Q2 = m * 333 J/g

Now, the total heat transfer during the cooling process is the sum of Q1 and Q2:

Qtotal = Q1 + Q2

To find the mass of ice needed, we need to solve for m:

m = Qtotal / ΔHf

m = (Q1 + Q2) / ΔHf

Now we can substitute the given values:

m = (28355.2 J + Q2) / 333 J/g

To calculate Q2, we need to determine the mass of water that corresponds to the volume of the diet cola (340 mL) since the density of water is the same as that of the diet cola (1.00 g/mL).

mwater = (340 mL) * (1.00 g/mL) = 340 g

Now we can calculate Q2:

Q2 = mwater * ΔHf

Q2 = (340 g) * (333 J/g)

Substituting Q2 back into the equation:

m = (28355.2 J + (340 g * 333 J/g)) / 333 J/g

Simplifying:

m = (28355.2 J + 113220 J) / 333 J/g

m = 141575.2 J / 333 J/g

m ≈ 425.8 g

To know more about minimum mass,

https://brainly.com/question/33516455

#SPJ11

The general solution to the given differential equation is [tex]y = cx^2 - 2x^3,[/tex] where c is a constant.

To find the general solution, we first rearrange the given differential equation in the standard form of a linear first-order equation. The equation is:

x^2y' - 2xy = 4

We can rewrite this equation as:

[tex]y' - (2/x)y = 4/x^2[/tex]

This is now in the form of a linear first-order equation, where the coefficient of y' is 1. To solve this type of equation, we use an integrating factor, which is given by the exponential of the integral of the coefficient of y. In this case, the integrating factor is:

IF = e^(-∫2/x dx) = e^(-2ln|x|) = e^(ln|x|^(-2)) = 1/x^2

Multiplying the entire equation by the integrating factor, we get:

[tex](1/x^2)y' - 2/x^3 y = 4/x^4[/tex]

Now, the left-hand side of the equation can be written as the derivative of the product of the integrating factor and y:

[tex]d/dx [(1/x^2)y] = 4/x^4[/tex]

Integrating both sides with respect to x, we have:

[tex]∫d/dx [(1/x^2)y] dx = ∫4/x^4 dx[/tex]

[tex]∫(1/x^2)y dx = -4/x^3 + C[/tex]

Integrating the left-hand side gives:

[tex]-(1/x)y + C = -4/x^3 + C[/tex]

Simplifying further, we get:

[tex]y = cx^2 - 2x^3[/tex]

where c is the constant obtained by combining the arbitrary constant C with the constant of integration.

Learn more about general solution

brainly.com/question/32554050

#SPJ11

In Q1, a 4-node quadrilateral isoparametric element is considered, and various calculations are performed. The Jacobian matrix is determined, followed by the computation of the stiffness matrix using both full Gauss integration scheme and reduced Gauss integration scheme. The differences between a rectangular element and the given element are discussed, focusing on where these differences arise. In addition, the stiffness matrix computed using full Gauss integration is compared to the exact integration computed using MATLAB's int command.

In Q2, the stiffness matrix of an 8-node quadrilateral isoparametric element is calculated using both full and reduced integration schemes. The same coordinates and material data from Q1 are used.

a) The Jacobian matrix is computed by calculating the derivatives of the shape functions with respect to the local coordinates.

b) The stiffness matrix using full Gauss integration scheme is obtained by integrating the product of the element's constitutive matrix and the derivative of shape functions over the element domain.

c) The stiffness matrix using reduced Gauss integration scheme is computed by evaluating the integrals at a reduced number of integration points compared to the full Gauss integration.

The differences between a rectangular element and the given element arise due to the variations in shape and location of the element nodes. These differences affect the computation of the Jacobian matrix, shape functions, and integration points, ultimately impacting the stiffness matrix.

In Q2, the same process is repeated for an 8-node quadrilateral isoparametric element, considering both full and reduced integration schemes.

The resulting stiffness matrices are compared to assess the accuracy of the numerical integration (full Gauss) compared to exact integration (MATLAB's int command). Any discrepancies between the two can provide insights into the effectiveness of the numerical integration method used.

To learn more about Gauss integration visit:

brainly.com/question/31157069

#SPJ11

The fracture stress (in MPa) for the plate made from the same material and containing the surface crack of 2 mm is 35.25. Therefore, option B is the correct answer.

Given that:

Thickness of thick plate = 2 x length of surface crack

= 2 x 8

= 16 mm

Fracture stress of thick plate = 141 MPa

As we know, fracture stress is inversely proportional to the length of the surface crack. Hence, we can apply the following relationship:

Fracture stress α 1/L

where, L is the length of the surface crack. Mathematically, Fracture stress

1/F1 = 1/F2/L1/L2

On solving the above relationship, we get

F2 = (L2/L1) x F1

On substituting the given values in the above equation, we get

F2 = (2/8) x 141

F2 = 35.25 MPa

Hence, the fracture stress (in MPa) for the plate made from the same material and containing the surface crack of 2 mm is 35.25. Therefore, option B is the correct answer.

To know more about stress visit

https://brainly.com/question/18430937

#SPJ11

As per the given graph, the relationship between ln(Pvap) and 1/T and the straight-line relationship observed when plotting these variables.

The Clausius-Clapeyron equation is a mathematical relationship that allows us to determine the enthalpy of vaporization (ΔHvap) of a substance based on its vapor pressure (Pvap) at different temperatures (T). It is an important equation used in thermodynamics to study phase transitions, specifically the transition from the liquid phase to the vapor phase.

The equation can be written as:

ln(Pvap) = −(ΔHvap/R)(1/T) + C

Where:

Pvap is the vapor pressure of the substance in atm (atmospheres).

ΔHvap is the enthalpy of vaporization of the substance in J/mol (joules per mole).

R is the ideal gas constant, which has a value of 8.314 J/(mol·K) (joules per mole per Kelvin).

T is the temperature of the substance in K (Kelvin).

C is a constant.

Now, let's use the given graph to determine the enthalpy of vaporization for the substance. Looking at the equation, we can see that it is in the form of a straight line equation, y = mx + b, where ln(Pvap) is the y-axis, 1/T is the x-axis, −(ΔHvap/R) is the slope (m), and C is the y-intercept (b).

To determine the enthalpy of vaporization, we need to find the slope of the line, which is given by:

−(ΔHvap/R) = slope

Rearranging the equation, we can solve for ΔHvap:

ΔHvap = -slope * R

By reading the slope of the line from the graph and substituting the value of R, we can calculate the enthalpy of vaporization for the substance.

It's important to note that the units of slope must match the units of R (J/(mol·K)) for the equation to work properly. If the units are different, conversion factors may be necessary to ensure consistency.

To know more about graph here

https://brainly.com/question/17267403

#SPJ4

- The maturity value of the 7-year term deposit is approximately $8151.99.
- The deposit earned approximately $1212.70 in interest.

The maturity value of a 7-year term deposit of $6939.29 at a 2.3% interest rate compounded quarterly can be calculated using the formula for compound interest:

Maturity Value = Principal Amount * (1 + (Interest Rate / Number of Compounding Periods)) ^ (Number of Compounding Periods * Number of Years)

In this case, the principal amount is $6939.29, the interest rate is 2.3% (or 0.023), the number of compounding periods per year is 4 (quarterly), and the number of years is 7.

Plugging in the values into the formula:

Maturity Value = $6939.29 * (1 + (0.023 / 4)) ^ (4 * 7)

Simplifying the equation:

Maturity Value = $6939.29 * (1 + 0.00575) ^ 28

Maturity Value = $6939.29 * (1.00575) ^ 28

Calculating the value using a calculator or spreadsheet:

Maturity Value ≈ $6939.29 * 1.173388

Maturity Value ≈ $8151.99

Therefore, the maturity value of the 7-year term deposit is approximately $8151.99.

To calculate the amount of interest earned, you can subtract the principal amount from the maturity value:

Interest Earned = Maturity Value - Principal Amount

Interest Earned = $8151.99 - $6939.29

Interest Earned ≈ $1212.70

Therefore, the deposit earned approximately $1212.70 in interest.

To know more about "Maturity Value":

https://brainly.com/question/24374294

#SPJ11

If Aliyah's position is less than 1.79 kilometers, then Diego is in front of Aliyah.

If Aliyah's position is greater than 1.79 kilometers, then Diego is behind Aliyah.

To determine if Diego is behind or in front of Aliyah at 3:00 PM, we need to simply the function

Then, we have that g(t) at t = 0 represents 3:00 PM and compare it with Aliyah's position.

For Diego, when t = 0

Substitute the values, we have;

g(0) = 1.59 + 0.2 + 0.01(0²)

expand the bracket, we have;

g(0) = 1.59 + 0.2 + 0

g(0) = 1.79 kilometers

Note that no information was given about Aliyah's position.

Learn more about functions at: https://brainly.com/question/11624077

#SPJ1