An engine develops 500 Nm of torque at 3900 rev/min. The power developed by the engine is ...

The following statement is not a scientific hypothesis:

C. Halle Berry is attractive.

A scientific hypothesis is a proposed explanation for an observation or pattern in nature that can be tested through further investigation and experimentation. It should be testable, falsifiable, and based on evidence.

Neon atoms emit red light. This is a scientific hypothesis that can be tested and confirmed by looking at the spectrum of light emitted by neon atoms.

B. There is an attractive force between the earth and moon. This is a scientific hypothesis that can be tested and confirmed by measuring the force of gravity between the earth and moon.

D. Summer days are the hottest of the year. This is a scientific hypothesis that can be tested and confirmed by collecting temperature data during the summer months.

E. The sky is blue. This is a scientific hypothesis that can be tested and confirmed by observing the sky under different atmospheric conditions.

The statement "Halle Berry is attractive" is a subjective opinion that cannot be tested or confirmed through scientific investigation, hence it is not a scientific hypothesis. Attractiveness, as a concept, can vary widely based on personal, cultural, and social factors.

Learn more about scientific hypothesis:

https://brainly.com/question/14521292

Answer:

2 stays the same 1 it will go bad or go good depends on which material you use

The magnitude of the minimum force needed to move the wagons from rest is 474320 N

We have come to know that the force and coefficient of friction have a simple relationship as shown by the equation below:

Frictional force (N) = coefficient of friction (μ) × normal reaction (N)

F = μN

Applying the above formula, we can determine the force needed to move the wagons from rest. Details below:

F = μN

F = 0.220 × 2156000

F = 474320 N

Thus, the force needed is 474320 N

Learn more about force:

https://brainly.com/question/12163222

#SPJ1

Answer:

c is the actual answer.

Explanation:

Answer:

c is correct

Explanation:

Answer:

1. The atoms in the collapsing cloud would move closer to one another.

2. Gravity

Explanation:

1. This is because there is a force of attraction between the atoms of the collapsing cloud. Thus, the atoms in the collapsing cloud would move closer to one another.

2. This is because gravity is the force of attraction between masses. Now, the collapsing cloud of dust contains mass of atoms, and as the atoms come together due to gravity, they form a larger mass which develops into a star.

(a) The atoms in the collapsing cloud would move closer to one another.

(b)  Due to the force of interaction between masses that is gravity

(a) The atoms will come closer

This is because there is a force of attraction between the atoms of the collapsing cloud. Thus, the atoms in the collapsing cloud would move closer to one another.

(b) Due to the gravitational attraction

This is because gravity is the force of attraction between masses. Now, the collapsing cloud of dust contains mass of atoms, and as the atoms come together due to gravity, they form a larger mass which develops into a star.

Hence

(a) The atoms in the collapsing cloud would move closer to one another.

(b)  Due to the force of interaction between masses that is gravity

To know more about force of attraction follow

https://brainly.com/question/16033085

Answer:

I think the answer is II.divergent

because parralel beams are convergent to the light source

and in the question it says incident from the light source

Answer:

The correct answer is (i) Convergent.

Answer:

 I₄ / Io = 0.388 = 38.8%

Explanation:

For this exercise we will analyze the effect of having two depolarizers with an annulus between them, this is described by Malus's law

         I = Io cos² θ

where tea is the angle between the two polarizers.

For this case we must apply this law to each pair of polarizers.

The light that reaches the first polarizer is non-polarized light, therefore only the light that has polarization is transmitted in the direction of the depolarizer, which is horizontal.

          I₁ = I₀ / 2

this intnesidad reaches the second polarizer that has an angle of 23º with respect to the first polarizer

          I₂ = I₁ cos² 23

          I₂ = I₀ / 2 0.847

This light reaches the third polarizer, which has an angle of 42º with respect to the first polarized one.

Let's find the angle with respect to the 2nd polarizer

          θ = 42- 23

          θ = 19º

we apply the law of Malus

          I₃ = I₂2 cos 19

          I₃ = I₀ 0.847 / 2 0.9455

          I₃ = Io 0.4

This intensity of light reaches the fourth polarizer, with an angle of 14º with respect to the 3polarizer

          I₄ = Io 0.4 cos 14

          I₄ = Io 0.4 0.970

          I₄ = Io 0.388

to give this result as a percentage

          I₄ / Io = 0.388 = 38.8%

The total height of the building from which the brick is thrown is 33.60 meters.

Speed is the rate of change of position of an object in any direction with respect to time. Speed is measured as the ratio of distance to the time in which the distance was covered. The SI unit of speed is m/s (meter per second).

The time of flight of the object from the building is:

t = 2μ sinθ/ g

t = 2 × 15 × sin10/ 9.8

t = 30 × 0.175/ 9.8

t = 0.535 seconds

Total time to cover the distance = 2.9 seconds

Total time = 2.9 - 0.535

Total time = 2.365

μg = μ sinθ

h = 15 × sin10  × 2.365 + 1/2 × 9.8 × (2.365)²

h = 2.625 × 2.365 + 1/2 × 9.8 × (2.365)²

h = 6.20 + 4.9 × 5.59

h =  6.20 + 27.40

h = 33.60 meters

Learn more about Speed here:

https://brainly.com/question/28224010

#SPJ1

Answer:

a) Joules

b) W (symbol for work) (J is symbol for Joules)

c) seconds

d) watts

Answer: Lifting 25 kilograms a distance of 2.4 meters in 2.0 seconds

Explanation:

Got it wrong and that’s the answer

Lifting 25 kilograms a distance of 2.4 meters in 2.0 seconds  exerts the same power output. Hence, option (A) is correct.

The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units.

Power is also referred to as activity in ancient writings. A scalar quantity is power.

Power required for lifting 30 kilograms of weights a vertical distance of 0.5 meters in 0.5 second = (30×9.8×0.5)/0.5 watt = 294 watt.

Power required for lifting 25 kilograms a distance of 2.4 meters in 2.0 seconds= (25×9.8×2.4)/2.0watt = 294 watt.

Power required for lifting  45 kilograms a distance of 2.4 meters in 3.0 seconds =  (45×9.8×2.4)/3.0watt = 352.8 watt.

Power required for lifting  45 kilograms a distance of 0.5 meters in 0.5seconds =  (45×9.8×0.5)/0.5watt = 441 watt.

Learn more about power here:

https://brainly.com/question/29575208

#SPJ2

Answer:My gues is about 1/3 kg

Explanation:

I don't know physics

Answer:

a) the modulus of elasticity (E) is 68.22 GPa

b) the modulus of elasticity in shear is 25.28 GPa

Explanation:

Given the data in the question;

First we determine the cross-sectional area A of the road;

A = π/4 × d²

given that; diameter d = 20 mm

we substitute

A = π/4 × ( 20 mm )²

A = π/4 × 400 mm

A = 314.159 mm²

Next, we find, the normal stress of the rod σ

σ = P / A

given that load p = 50 kN = 50,000 Newton

we substitute

σ = 50,000 N / 314.159 mm²

σ = 159.155 N/mm²

σ = 159.155 Mpa

Next, is the normal strain ε

ε = δ / L

given that; change in length δ = 1.40 mm and Length of rod L = 600 mm

we substitute

ε = 1.40 mm / 600 mm

ε = 0.002333

Now, we find the modulus of elasticity;

we know that;

σ = Eε

modulus of elasticity E = σ / ε

we substitute

E = 159.155 Mpa / 0.002333

E = 68219.031 MPa

E = ( 68219.031 / 1000 ) GPa

E = 68.22 GPa

Therefore, the modulus of elasticity (E) is 68.22 GPa

b)

we know that the Poisson's ratio v is;

v = -(ε[tex]_{lat[/tex] / ε )

v = - (((d[tex]_f[/tex] - d)/d) / ε )

where d[tex]_f[/tex]  is the final diameter of the rod ( 19.9837  mm ) and ε[tex]_{lat[/tex] is the lateral strain

so we substitute

v = - ((( 19.9837 - 20 ) / 20 ) / 0.002333  )

v = - (( -0.0163 / 20 ) / 0.002333  )

v = - ( - 0.000815 / 0.002333 )

v = - ( - 0.3493 )

v = 0.3493

So, our shear modulus will be;

G = E / 2( 1 + v )

we substitute

G = 68.22 GPa / 2( 1 + 0.3493  )

G = 68.22 GPa / 2( 1.3493  )

G = 68.22 GPa / 2.6986

G = 25.28 GPa

Therefore, the modulus of elasticity in shear is 25.28 GPa

Answer:

A

Explanation:

occurs when a magnetic feild and an elctric conductor move relative to one another

The two charges, each of magnitude 6.0 μC, exert a force of 0.70 N at separation  of 1.47 meters.

Electric force is the attracting or repulsive interaction between any two charged things. Similar to any force, Newton's laws of motion describe how it affects the target body and how it does so. One of the many forces that affect objects is the electric force.

We know that electric force can be defined as:

Force: F = kQq/r²

0.70 = 9.0 × 10⁹ × (6.0×10⁻⁶)²/r²

r = 1.47 meter.

Hence, the separation between them is 1.47 meters.

Learn more about electric force here:

https://brainly.com/question/2526815

#SPJ1

Answer:

A)  λ = 4.88 10² nm,  B)   λ = 4.08 10² nm

Explanation:

The spectrum of hydrogen is correctly explained by the Bohr model, where the energy of each level is

          Eₙ = -13.606 /n²       [eV]

the transition generally occurs from a given level to a lower state nf <no, so a transition is

          ΔE = E_f -Eₙ = -13,606 ( [tex]\frac{1}{n_f^2} - \frac{1}{n_o^2}[/tex] )

to find the wavelength let's use the planck relation

          ΔE = h f

the speed of light is

          c = λ f

we substitute

          ΔE = h c /λ

          λ = [tex]\frac{h \ c}{ \Delta \lambda}[/tex]

let's apply this equation to our case

the Balmer series has as final state the level n_f = 2

A) initial state n₀ = 4, final state n_f = 2

         ΔE = -13.606 ( [tex]\frac{1}{2^2} - \frac{1}{4^2}[/tex] )

         ΔE = 2.55 eV

let's reduce to SI units

         ΔE = 2.55 eV (1.6 10⁻¹⁹ J / 1 eV) = 4.08 10⁻¹⁹ J

we calculate

         λ = 6.63 10⁻³⁴ 3 10⁸ / 4.08 10⁻¹⁹

         λ = 4.875 10⁻⁻⁷ m

we reduce to nm

         λ = 4.875 10⁻⁷ m (10⁹ nm / 1m)

         λ = 487.5 nm

we reduce to three significant figures

         λ = 4.88 10² nm

B) initial state n₀ = 5

          ΔE = -13,606 ( [tex]\frac{1}{2^2} - \frac{1}{5^2}[/tex] )

          ΔE = 2,857 eV

we repeat the process of the previous point

         ΔE= 2,857 1.6 10⁺¹⁹ = 4.286 10⁻¹⁹J

we look for the wavelength

           λ = 6.63 10⁻³⁴ 3 10⁸ / 4.88 10⁻¹⁹

           λ = 4.0758 10⁻⁷ m

we reduce to nm

           λ = 4.0758 10² nm

ignificant numbers

           λ = 4.08 10² nm

Proxima Centauri otherwise known as Alpha Centauri C, is the closest star to our solar system, located about 4.24 light-years away. It was discovered in 1915 by Robert Innes, the director of the Union Observatory in South Africa. Innes identified Proxima Centauri as a possible member of the Alpha Centauri system after noticing that the star had a similar proper motion to Alpha Centauri A and B.

Proxima Centauri was first observed through telescopes, which allowed scientists to study the star's spectra and estimate its distance from Earth. In the following decades, scientists continued to study Proxima Centauri through telescopes, including the Hubble Space Telescope, which provided high-resolution images of the star.

In 2016, the European Southern Observatory announced the discovery of an exoplanet orbiting Proxima Centauri, called Proxima Centauri b. This discovery was made using the radial velocity method, which measures the star's small wobbles caused by the gravitational pull of an orbiting planet.

Despite the advances in our understanding of Proxima Centauri, no spacecraft have ever reached this star. The distance between Proxima Centauri and Earth is so vast that it would take tens of thousands of years to reach the star using current propulsion technology.

One potential solution to this problem is the use of interstellar travel, which would allow humans to travel to Proxima Centauri within a human lifetime. There are several proposed methods for interstellar travel, including using a starship propelled by fusion engines or a massive light sail pushed by a beam of lasers. However, these technologies are still in the theoretical stage and have not yet been developed.

There are also many other challenges that must be overcome in order for humans to travel to Proxima Centauri. For example, humans would need to find a way to protect themselves from the high levels of radiation that they would be exposed to during the journey. They would also need to find a way to provide enough food, water, and other resources to sustain themselves for the duration of the trip.

Overall, while it is theoretically possible for humans to travel to Proxima Centauri, it would be a massive undertaking that would require significant technological advancements and the development of new solutions to many challenges.

Sources of Works Cited include:

"Proxima Centauri." Wikipedia, Wikimedia Foundation, 5 Jan. 2021,

"Proxima Centauri b." Wikipedia, Wikimedia Foundation, 20 Nov. 2020,

"Interstellar Travel." Wikipedia, Wikimedia Foundation, 4 Jan. 2021,

Therefore, the correct answer is as given above

learn more about Proxima Centauri: https://brainly.com/question/21107590

#SPJ1

Answer:

N = 365 / 28 = 13 half-lives in one year

(1/2)^13 = .000122     fraction remaining in one year

510 * .000122 = .062 grams

Answer:

6.45

Explanation:

Got it right on Acellus

Answer:

औडंठः की दुनिया कार्टून दर्शन होली है और यह बियर का अच्छा विकल्प है। विकल्प है। यो कुरा मेरो आफ्ना लागि विचार र त्यहाँको बडेमाको बिल्डिङ भित्र म जिन्दगी एक यात्रा हो कहाँबाट शुरु भइ कहाँ पुगेर अन्त हुन्छ

Given :

An object 50 cm high is placed 1 m in front of a converging lens whose focal length is 1.5 m.

To Find :

the image height (in cm).

Solution :

By lens formula :

[tex]\dfrac{1}{v} - \dfrac{1}{u} = \dfrac{1}{f}[/tex]

Here, u = - 100 cm

f =  150 cm

[tex]\dfrac{1}{v} - \dfrac{1}{-100} = \dfrac{1}{150}\\\\v = - 300 \ cm[/tex]

Now, magnification is given by :

[tex]m = \dfrac{v}{u} = \dfrac{h_i}{h_o}\\\\h_i = \dfrac{300}{100}\times 1\\\\h_i = 3 \ m[/tex]

Therefore, the image height is 3 m or 300 cm.

Answer:

Mass

Explanation:

The weight of an object is dependent upon the mass and the value of acceleration due to gravity:

W = mg

Since the value of acceleration due to gravity (g) changes from planet to planet. Hence, the weight of an object also changes with location.

Friction depends upon the material of surfaces and the weight.

F = (coefficient of friction)W

Since weight changes with location. Therefore, the friction also changes with location.

The mass of an object is the quantity of matter contained in the body. It remains constant anywhere in the universe.

Hence, the correct option is:

Mass

Answer:

;) hope it's helpful

Explanation:

5000 + 621 = 5621

Facts about 5621

Sig Figs

4

5621

Decimals

0

Scientific Notation

5.621 × 103

E-Notation

5.621e+3

Words

five thousand six hundred twenty-one

Option C is correct.

The magnitude of the charge on an electron compared to the magnitude of the charge on a proton is same.

We have a electron and a proton.

We have to estimate the fact whether the magnitude of the charge on an electron compared to the magnitude of the charge on a proton is -

a) is greater

or

b) is smaller

or

c) is the same

The sufficiency or deficiency of electrons is called electric charge.

According to the question -

The charge on a electron is -   q(e) = - 1.6 x [tex]10^{-19}[/tex] Coulombs

The charge on a proton is -   q(p) = + 1.6 x  [tex]10^{-19}[/tex] Coulombs

But, according to the property of magnitude :

| + x| = + x

| - x| = - (- x) = + x

In the similar manner -

|q(e)| = |q(p)| = 1.6 x [tex]10^{-19}[/tex] coulombs

Hence, the magnitude of the charge on an electron compared to the magnitude of the charge on a proton is same.

To solve more questions on Electric charge, visit the link below -

https://brainly.com/question/14971950

#SPJ2

According to the right-hand rule, the magnetic field of the solenoid will be directed towards the left direction.

Right Hand Thumb Rule is the rule which is used If a current carrying conductor is imagined to be held in the right hand direction such that the thumb always points along the direction of the current flow, then the direction of the wrapped fingers in the hand will give the direction of the magnetic field lines of the bar magnet.

By the application of the right-hand rule, the magnetic field of the solenoid will be directed towards the left hand direction.

Learn more about Bar magnet here:

https://brainly.com/question/18403251

#SPJ1

Answer:

a. 25000J or 25KJ

b.2500w

Explanation:

a. since we say work is force applied in the same line or straight line

W=F(newtons )*D(metres)

b. power is work over time

Answer:

25000 J work with 2500 W power

Explanation:

work done = force . displacement = 500 N . 50 m= 25000 J

Power= work done / time taken = 25000 J / 10 s = 2500 W

Here's the solution,

A.)

we know,

[tex]power = \dfrac{work \: done}{time} [/tex]

so,

=》

[tex]600 = \dfrac{work \: done}{10} [/tex]

=》

[tex]work \: done = 600 \times 10[/tex]

=》

[tex]work \: done = 6000 \: \: joules[/tex]

B.)

[tex]work \: done = force \times displacement[/tex]

so,

=》

[tex]6000 = force \times10[/tex]

=》

[tex]force = \dfrac{6000}{10} [/tex]

=》

[tex]force = 600 \: \: Newtons[/tex]

The perpendicular force that a surface applies to an item is known as the normal force. FN = m ⋅ g

The perpendicular force that a surface applies to an item is known as the normal force. For instance, if you place a book on a table, a gravitational force will cause it to fall. The table pulls on the book in order to counterbalance this force and keep it from dropping. The normal force, often known as the opposing force, is denoted by the symbols FN F N or  NN. "N" stands for the normal force unit (Newton).

A common illustration of Newton's third rule of motion is the normal force.

When one object applies force to another, the other applies a force in the opposite direction and of equal magnitude to the first object (action equals reaction).

Therefore, the force applied by the item to the surface is equal to the normal force. The calculations change according to the surface's slope.

The formula is as follows for an object laying on a flat surface:

FN = m ⋅ g

where

The mass of an object is m.

Gravitational acceleration is denoted by g.

The normal force (FN F N ) for an item on a flat surface is equal to its gravitational force, according to Newton's third law ( WW).

The formula is as follows for an object laying on a flat surface:

To know more about Normal Force refer to:

https://brainly.com/question/13622356

#SPJ1

Answer:

d = 11.1 m

Explanation:

Since the inclined plane is frictionless, this is just a simple application of the conservation law of energy:

[tex] \frac{1}{2} m {v}^{2} = mgh[/tex]

Let d be the displacement along the inclined plane. Note that the height h in terms of d and the angle is as follows:

[tex] \sin(15) = \frac{h}{d} \\ or \: h = d \sin(15) [/tex]

Plugging this into the energy conservation equation and cancelling m, we get

[tex] {v}^{2} = 2gd \sin(15)[/tex]

Solving for d,

[tex]d = \frac{ {v}^{2} }{2g \sin(15) } = \frac{ {(7.5 \: \frac{m}{s}) }^{2} }{2(9.8 \: \frac{m}{ {s}^{2} })(0.259)} \\ = 11.1 \: m[/tex]