an elevator suspended by a cable is descending at constant ve-locity. how many force vectors would be shown on a free-body diagram? name them

The maximum acceleration of the particle is 1780 cm/s^2.

The maximum acceleration of a particle in simple harmonic motion is equal to the product of the angular frequency squared (ω^2) and the amplitude (A).

The angular frequency can be calculated from the given frequency as follows:

[tex]ω = 2πf = 2π(3.0 Hz) ≈ 18.85 rad/s[/tex]

Therefore, the maximum acceleration of the particle is:

[tex]a_max = ω^2A = (18.85 rad/s)^2(5.0 cm)[/tex]

[tex]a_max = 1780 cm/s^2[/tex]

Learn more about acceleration of a particle at: https://brainly.com/question/20164286

#SPJ11

A cold air mass and a warm air mass meeting near the ground can create a rotating horizontal tube of air called: tornado

Tornadoes are formed when two different air masses, such as a cold air mass and a warm air mass, meet near the ground. Warm air is less dense than cold air, so when it rises it creates a low-pressure area at the surface.

The cold air, which is dense, then rushes in to fill the low-pressure area, creating a spinning motion. This spinning motion can become very strong, forming a rotating column of air known as a tornado.

The rotation and funneling of the warm and cold air masses create an area of low pressure, which then pulls in additional warm and cold air, further strengthening the tornado. Tornadoes can be very destructive, with winds reaching over 300 miles per hour.

To know more about tornadoes refer here:

https://brainly.com/question/28285636#

#SPJ11

The velocity of the yo-yo at the bottom of the circle is 3.13 m/s.

When an object moves in a circular path, it is known as circular motion. It is circular since it follows a circular path. For example, the movement of the planets around the sun or the movement of the earth around its axis is an example of circular motion. Centripetal force is required to maintain circular motion because the object always attempts to move away from the center, which is known as centrifugal force. Centripetal force pulls the object towards the center, keeping it in circular motion. The velocity of an object in circular motion is not constant. It varies as the object moves through the circular path because the object changes direction at every point in the path.

Centripetal acceleration is defined as the acceleration of an object towards the center of a circular path. It is calculated using the formula a=v²/r, where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circular path. The centripetal force required to maintain the circular motion is calculated using the formula F=ma, where F is the centripetal force, m is the mass of the object, and a is the centripetal acceleration.

Now, let us calculate the velocity of the yo-yo at the bottom of the circle. The yo-yo is moving in a circular path perpendicular to the ground. The mass of the yo-yo is 0.01 kg. The yo-yo moves in a clockwise direction with a constant speed of 2 m/s. We need to find the velocity of the yo-yo at the bottom of the circle. We know that the velocity of an object in circular motion is not constant. It varies as the object moves through the circular path because the object changes direction at every point in the path. Since the yo-yo is moving in a circular path, we can use the formula v=√(gr) to calculate the velocity at the bottom of the circle, where g is the acceleration due to gravity and r is the radius of the circular path. Since the yo-yo is moving in a circular path perpendicular to the ground, the radius of the path is equal to the length of the string. We know that the length of the string is not given in the problem. However, we can assume that the length of the string is equal to the height of the swing. Let us assume that the height of the swing is 1 meter. Therefore, the radius of the circular path is equal to 1 meter. Now, we can calculate the velocity of the yo-yo at the bottom of the circle using the formula v=√(gr). v=√(9.8*1)=3.13 m/s. Therefore, the velocity of the yo-yo at the bottom of the circle is 3.13 m/s.

For more such questions on Velocity.

https://brainly.com/question/27974361#

#SPJ11

The distance 'd' of the equation represents the distance between the two slits, A and B. This is because the equation is for the double-slit experiment, which is based on two narrow slits acting as wave sources.

This is the distance between the two sources that act as wave sources, which interfere with each other to create the diffraction patterns C, D, E, and F. The light bands between D and E and F are not part of the equation and do not represent the 'd' of the equation.

The equation: λ/d = x/L represents the image form between A and B.  This distance is used in the equation to calculate the angle of diffraction.

Diffraction is the process by which light or sound waves bend around corners or obstacles and spread out when passing through narrow openings.

To learn more about diffraction click here https://brainly.com/question/12290582

#SPJ1

complete question: The image below is a sketch of two-slit diffraction of light. Narrow slits at A and B act as wave sources, and waves interfering in various phases are shown at C, D, E, and F.

A sketch of two-slit diffraction of light. Narrow slits at A and B act as sources on the left, and waves interfering in various phases are shown at C, D, E, and F on the right.

The equation for the double-slit experiment for small angles is  λ/d = x/L

In the image, which description below represents the d of the equation?

The distance between A and B

The distance between A and D

The distance between midpoints D, E, and F

The light bands between D and E and F

Answer: the correct answer is; the distance between A and B

Explanation:

I just took the test, and get it right

A lightbulb need 300 J to stay on for 5 Seconds. How much power was needed to keep the lightbulb on for this amount of time?

We know that,

[tex] \: { \boxed{ \sf{Power = \dfrac{Work}{time}}}}[/tex]

Where,

[tex] \longrightarrow \sf \dfrac{300}{5} \\ \\ \longrightarrow \sf60 \: watts \\ \\ [/tex]

Therefore, 60 watts power is needed to keep the lightbulb on.

The gravitational area close to the floor of Mercury is 3.70 N/kg. The gravitational area close to the floor of Venus is 8.87 N/kg.

For Mercury:

g = (6.6743 × 10^-11 N m²/kg²) x (3.29E23 kg) / (2.44E6 m)²

g = 3.70 m/s²

The gravitational area close to the floor of Mercury is 3.70 N/kg.

For Venus:

g = (6.6743 × 10^-11 N m^2/kg²) * (4.87E24 kg) / (6.05E6 m)²

g = 8.87 m/s²

The gravitational area close to the floor of Venus is 8.87 N/kg.

Venus is a planet in our solar device, named after the Roman goddess of love and splendor. From a physics angle, Venus is an interesting object to look at because of its proximity to Earth and its specific characteristics.

Venus is the second one planet from the sun and is similar in size and composition to Earth. but, its environment is a lot thicker, with a high awareness of carbon dioxide and sulfuric acid. the intense greenhouse effect due to this thick surroundings makes Venus the hottest planet within the sun machine, with surface temperatures reaching over 460 degrees Celsius. Physicists study Venus to better apprehend planetary atmospheres, greenhouse consequences, and weather dynamics.

To know more about Venus visit here:

brainly.com/question/10601018

#SPJ4

The component of magnetic field should be larger at the center of the coil is the axial.

A magnetic field is generated by a current-carrying wire. The shape of the magnetic field produced by a current-carrying wire is circular. When we coil the wire into a cylindrical shape, the magnetic field lines become parallel to the central axis.

At the center of the coil, the axial component of the magnetic field is maximum because the magnetic field lines are parallel to the central axis. So, the axial component of the magnetic field is larger than the radial component of the magnetic field.

Learn more about magnetic field at:

https://brainly.com/question/11514007

#SPJ11

The coefficient of kinetic friction between the tires and the road is 4.7.

To calculate the coefficient of kinetic friction, we can use the formula:

coefficient of kinetic friction = change in speed/force of friction.

The change in speed is 46 km/h - 0 km/h = 46 km/h.

The force of friction is the mass of the object times the acceleration due to gravity (9.8 m/s2).

We will assume the mass of the object is 1 kg.

Therefore, the force of friction is 9.8 N.

We can now calculate the coefficient of kinetic friction: coefficient of kinetic friction = 46 km/h/9.8 N = 4.7.

Therefore, the coefficient of kinetic friction between the tires and the road is 4.7.

To know more about coefficient of kinetic friction click here:

https://brainly.com/question/13828735

#SPJ11

A pump with a displacement of 65 cc/rev has a mechanical efficiency of 0.93. When the outlet pressure is 18.1 MPa, the actual torque is 11709.5 N-m.

Torque is a force on a rotating axis that can cause an object to move in a circle or rotate. Torque is also known as the moment of force. Any force whose direction does not stop at the axis of rotation of the object or the object's point of mass can be said to give torque to the object.

To calculate the actual torque (in N-m) when the outlet pressure is 18.1 MPa for a pump with a displacement of 65 cc/rev and a mechanical efficiency of 0.93, you can use the formula

Torque = Pressure x Displacement / Efficiency.

Using this formula, the actual torque would be equal to

Torque =  18.1 MPa x 65 cc/rev / 0.93

Torque = 1709.5 N-m.

So, torque is 1709.5 N-m

Learn more about actual torque at https://brainly.com/question/30187145

#SPJ11

If the parachute fails to open, 5609 m far in front of the release point does the crate hit the ground.

Break the motion of particle into two direction

1) vertical direction

2) horizontal direction

in vertical direction = [tex]V_{oy}[/tex]=0 m/s     a=-9·8 m/s2

= Y = -800m      t = time fraud

Y =  [tex]V_{oy}[/tex] t + 1/2 at^2 = -800 = 0 + 1/2(-9.8)(t^2)

so, t = 12.785

in horizontal direction = [tex]V_{ox}[/tex] = 500 x 5/18 +300= 438.39m/s

t = 12.7885 & x = distance From releasing point

So, x =  [tex]V_{ox}[/tex] t = (438.89) (12.78) = 5609m

X = 5609 m

The motion of a particle refers to its movement in space with respect to a particular reference point. This can include its speed, direction, and acceleration. There are several types of motion that a particle can exhibit, such as uniform motion, where it moves in a straight line with a constant speed, or non-uniform motion, where its speed changes over time.

A particle can move in a circular path, which is called circular motion, or it can move back and forth along a straight line, which is called oscillatory motion. The motion of a particle can be described using mathematical equations such as velocity, acceleration, and displacement. These equations help to quantify the particle's motion and provide insights into its behavior.

To learn more about Motion of particle visit here:

brainly.com/question/23148906

#SPJ4

The rifle would have the largest magnitude of momentum upon firing a bullet.

What is momentum?

The momentum of an object can be defined as the product of its mass and velocity in the same direction.

What is the formula for momentum?

The formula for momentum is given as:

p = mv

Where, p = momentum = mass, v = velocity

What is the significance of momentum?

Momentum has both magnitude and direction. Momentum is significant because it is conserved. According to the Law of Conservation of Momentum, the total momentum of an isolated system remains constant if no external force is applied.

How would a rifle firing a bullet have the largest magnitude of momentum?

A rifle fires a bullet, and the bullet moves in the opposite direction. As a result, the rifle recoils. The magnitude of the bullet's momentum is equal to the magnitude of the rifle's recoil momentum, but they have opposite directions.

The rifle, on the other hand, would have the greatest magnitude of momentum upon firing a bullet. This is due to the fact that the rifle has a larger mass than the bullet. As a result, the rifle has more momentum.


Learn more about Momentum here:

https://brainly.com/question/30487676#


#SPJ11

To determine if the bearing diameters are normally distributed at the 5% significance level, we can use a Chi-square goodness-of-fit test. Here's a step-by-step explanation:

1. Calculate the expected frequencies under the assumption of a normal distribution with a mean of 10.00 mm and a standard deviation of ±0.10 mm. You can use a standard normal distribution table or software to find the probabilities for each interval and then multiply these probabilities by the sample size (300) to obtain the expected frequencies.

2. Compare the observed frequencies (from the given frequency distribution) with the expected frequencies calculated in step 1.

3. Calculate the Chi-square statistic using the formula: χ² = Σ [(Observed frequency - Expected frequency)² / Expected frequency] for each interval.

4. Determine the degrees of freedom for the test. This is equal to the number of intervals minus one.

5. Find the critical value for the Chi-square distribution with the determined degrees of freedom and a significance level of 5%.

6. Compare the calculated Chi-square statistic with the critical value. If the calculated value is greater than the critical value, reject the null hypothesis and conclude that the bearing diameters are not normally distributed.

If the calculated value is less than the critical value, fail to reject the null hypothesis and conclude that there is not enough evidence to say that the bearing diameters are not normally distributed.

Following these steps will help you determine if the bearing diameters are normally distributed at the 5% significance level.

To learn more about "Chi-square goodness-of-fit test" here:

https://brainly.com/question/16865619#

#SPJ11

The maximum horizontal distance through which the bucket will swing is 12.70ft/s.

Given: Crane moves at velocity, v, and stops suddenly. The bucket is to swing no more than 12 ft horizontally.

Find: Maximum allowable velocity v

[tex]v_1=v\\v_2=0[/tex]

[tex]T_2=1/2mv^2[/tex]

[tex]U_1-2=-mgh\\d=12ft[/tex]

[tex]AB^2= (30 ft)^2=d^2+y^2=(12ft)^2+y^2[/tex]

[tex]y^2=900-144=756[/tex]                         [tex]y=\sqrt{756}[/tex]

[tex]h=30 - y = 30-\sqrt{756} = 2.5045 ft[/tex]

[tex]T_1[/tex] + [tex]U_{1-2}[/tex] = [tex]T_2[/tex]

[tex]1/2mv^2-mg(2.5045)=0[/tex]

[tex]v^2=2g(2.5045)-2(32.2) (2.5045)[/tex]

[tex]v^2=161.289.v = 12.6999\\v=12.70ft/s[/tex]

Velocity is a term used in physics to describe the rate of change of an object's position with respect to time. Velocity and speed are often used interchangeably. However, in physics, velocity is a more precise term as it takes into account both the speed and direction of an object's motion.

When an object is moving in a straight line, its velocity is simply the object's speed in that direction. However, when an object is moving in a curved path, its velocity is constantly changing due to the change in direction. The standard unit for velocity is meters per second (m/s), although other units such as kilometers per hour (km/h) or miles per hour (mph) are also commonly used.

To learn more about Velocity visit here:

brainly.com/question/28738284

#SPJ4

Transits are so rare, astronomers think they are the best way to search for extrasolar earths Transits are one of the most reliable methods for detecting extrasolar planets, which is why astronomers consider them the best way to search for extrasolar Earths. Transits are rare, but they are also one of the most reliable ways to detect extrasolar planets. When a planet passes in front of a star, the amount of light the star emits drops by a small amount.

This is known as a transit, and it occurs when a planet passes in front of a star, resulting in a decrease in the star's brightness. Astronomers can detect transits by observing the brightness of a star over time. When a planet passes in front of a star, the amount of light the star emits drops by a small amount.

This drop in brightness is small, but it is detectable with modern telescopes. When an extrasolar planet is detected via transit, astronomers can then study the planet's atmosphere using spectroscopy. Spectroscopy can reveal the chemical makeup of a planet's atmosphere, allowing astronomers to determine if it contains water or other key ingredients for life.

Because transits are rare, astronomers must observe many stars over long periods of time to detect them. However, the data they collect can be extremely valuable in understanding the universe and the potential for life beyond Earth.

To know more about Transits refer here:

https://brainly.com/question/29366958#

#SPJ11

Assuming that it does not slip, the acceleration of the seed is 0.89 m/s².

The acceleration of the seed can be calculated using the formula for centripetal acceleration:

a = (v²) / r

where a is the centripetal acceleration, v is the velocity of the seed, and r is the distance from the axis of rotation to the seed.

To use this formula, we need to first convert the rotational speed of the turntable from rev/min to radians per second. There are 2π radians in one revolution, so:

ω = (33 1/3 rev/min)(2π rad/rev)(1 min/60 s) = 3.49 rad/s

The velocity of the seed can be calculated from the tangential velocity formula:

v = rω

where v is the tangential velocity of the seed.

Substituting the given values, we get:

v = (0.073 m)(3.49 rad/s) = 0.255 m/s

Now we can use the formula for centripetal acceleration:

a = (v²) / r

Substituting the values we have calculated, we get:

a = (0.255 m/s)² / 0.073 m = 0.89 m/s²

Therefore, the acceleration of the seed is 0.89 m/s² assuming that it does not slip.

Learn more about centripetal acceleration here: https://brainly.com/question/79801.

#SPJ11

Answer:

A. ionization electron

A bulb emits light ranging in wavelength from 2.64e-7 m to 8.66e-7 m. The maximum frequency of the light is [tex]1.14 \times 10^{15} Hz.[/tex]

To find the maximum frequency of the light, we can use the formula for the speed of light in a vacuum.

The speed of light (c) is given by [tex]3.00 \times 10^{8} m/s.[/tex]

We can use the following formula to find the frequency of light:

f = c / λ

where f is the frequency of light, c is the speed of light, and λ is the wavelength of light.

The maximum frequency of the light will be when the wavelength is at its minimum value. So, we can use the minimum wavelength in the formula above.

Hence, the maximum frequency of the light is given by:f = c / λmax

                                                                                              = [tex]3.00 \times 10^{8}  / 2.64 \times 10^{-7}[/tex]

                                                                                              = [tex]1.14 \times 10^{15} Hz.[/tex]

for such more question on frequency

https://brainly.com/question/254161

#SPJ11

When two objects with equal masses are in motion, the object with the greater velocity will have more kinetic energy.

This is because the kinetic energy of an object is directly proportional to the square of its velocity. Kinetic energy is the energy an object possesses due to its motion. It is a scalar quantity, which means it has only magnitude and no direction.

The formula for calculating the kinetic energy of an object is given by:

K = 1/2 mv²

Where ,K = kinetic energy, m = mass of the object, v = velocity of the object. As you can see from the formula, the kinetic energy of an object increases with an increase in its velocity, while its mass remains constant.

Therefore, in the given scenario, the object with the greater velocity will have more kinetic energy.

To know more about kinetic energy:

https://brainly.com/question/15764612

#SPJ11

The potential energy of a toolbox weighing 5 newtons is zero.

The potential energy of a toolbox weighing 5 newtons depends on its height relative to the ground.

Potential energy (PE) is equal to the mass of the object (m) multiplied by the acceleration due to gravity (g) multiplied by its height (h): PE = mgh.

Therefore, the potential energy of the toolbox is equal to 5*9.8*h (where h is the height of the toolbox above the ground).

Assuming that the toolbox is resting on the ground, it has zero potential energy since its height is zero. If the toolbox is lifted above the ground, however, then it will have a greater potential energy.

For example, if the toolbox is lifted to a height of 10 meters above the ground, then it will have a potential energy of 490 joules (5*9.8*10).

The potential energy of the toolbox when it is placed next to the sawhorse, the height of the sawhorse needs to be taken into consideration.

If the sawhorse is higher than the ground, then the toolbox will have a greater potential energy since it will be located at a greater height above the ground.

If the sawhorse is lower than the ground, then the toolbox will have a lesser potential energy than when it is resting on the ground.

The potential energy of a toolbox weighing 5 newtons when placed next to a sawhorse depends on the height of the sawhorse relative to the ground.

If the sawhorse is higher than the ground, then the toolbox will have a greater potential energy, and if it is lower than the ground, then the toolbox will have a lesser potential energy.

to know more about potential energy refer here:

https://brainly.com/question/24284560#

#SPJ11

The maximum magnetic energy stored in the space above a city, with an area of 3.40 108 m2 and a height of 1300 m, can be calculated using the equation E = B²V/2, where B is the strength of the Earth's magnetic field (7.0 10-5 t), V is the volume of the space (4.42 10¹⁰ m³), and E is the energy stored. Plugging in the values for B and V, we find the maximum magnetic energy stored in the space above the city to be 6.17 10¹⁵ J.

The Earth's magnetic field is important for providing a protective barrier against dangerous cosmic rays, and for allowing creatures that use magnetoception, such as birds, to navigate.

The Earth's magnetic field is always changing and is generated by electrical currents in the core of the Earth, which are influenced by convection currents and the rotation of the Earth. Even though the energy stored in the Earth's magnetic field is quite small, it still plays an important role in the way the Earth works.

Know more about magnetoception here

https://brainly.com/question/24308326#

#SPJ11

Answer:

All options except fur color of palomino horses and blood type

Answer:

A, B, D, and E

Explanation:

According to Newton's first law, an unbelted victim in a car accident will continue to move in the same direction and with the same speed until the dashboard causes a change in motion.

Inertia is the tendency of an object to remain in motion in the absence of an unbalanced force. It is the property of an object to resist any change in motion unless acted upon by an external force.

The dashboard applies an external force that changes the direction and speed of the victim. This is because the person has no external forces acting on them to cause them to stop. Since they were in motion at the time of the accident, they will continue in that motion unless acted upon by another force, such as the dashboard, until they come to a stop or another force acts upon them.

Therefore, the best exemplifies the law of inertia. The law of inertia states that an object at rest will remain at rest, and an object in motion will remain in motion at a constant velocity unless acted upon by an external unbalanced force.

Learn more about the speed at

brainly.com/question/24091038

#SPJ11

(a) When the velocity and acceleration vectors are opposite, the object is slowing down while moving in the same direction. An example of this is a car moving along a straight road while braking. Another example is when a particle is moving around a circular track at a constant speed but changing direction.

The velocity vector is always tangent to the track while the acceleration vector points towards the center of the circle. Also, a car moving along a straight road while speeding up has a velocity vector in the direction of motion and an acceleration vector in the opposite direction, which is opposite to the direction of the velocity.

(b) When the velocity and acceleration vectors are in the same direction, the object is speeding up in the direction of motion. An example of this is a car moving along a straight road while speeding up. Also, a particle moving around a circular track at a constant speed has a velocity vector that is tangent to the track, and its acceleration vector points towards the center of the circle.

(c) When the velocity and acceleration vectors are mutually perpendicular, the object is changing direction, but not changing its speed. An example of this is a particle moving around a circular track at a constant speed, where the velocity vector is tangent to the track and the acceleration vector points towards the center of the circle.

Additionally, a car moving along a straight road while speeding up or braking has a velocity vector in the direction of motion or opposite to the direction of motion, respectively, and an acceleration vector perpendicular to the velocity vector.

For more details about vector click here:

https://brainly.com/question/29740341#

#SPJ11

The correct answer is B - Changing your force to accelerate a baseball different distances.

Newton's second law of motion is also called the law of acceleration. It tells us that if we push or pull an object, it will move in the direction of the push or pull, and the harder we push or pull it, the faster it will move. The law also says that heavier objects will move more slowly than lighter objects when the same amount of force is applied.

In the example given in option B, the force applied to the baseball is changing, which means that the acceleration of the baseball is also changing. This is a clear demonstration of the law of acceleration. Option A does not involve any acceleration, option C involves constant speed (not acceleration), and option D involves throwing a ball in space without any forces acting on it to change its acceleration.

Jumping off a floating canoe towards a dock may not be as simple as it appears due to the reaction force created by the canoe's displacement of water. Therefore, it's important to exercise caution and consider the various factors that could impact the jump's outcome. This phenomenon is known as the "reaction force," which is equal and opposite to the force exerted by the canoe on the water.

When you jump off the canoe, you create a force that pushes you forward towards the dock, but the water's reaction force pushes you backward, causing you to fall into the water instead. When you jump from the front of a floating canoe towards a dock, you might expect to land on the dock effortlessly.

Moreover, the instability of the canoe on the water surface, the angle and velocity at which you jump, the distance between the canoe and the dock, and the depth of the water could all affect the outcome of your jump. Therefore, it is crucial to take into account these factors before jumping off a floating canoe.

Know more about force here:

https://brainly.com/question/26115859

#SPJ11

The solid sphere should be released from a height of 0.225 m on the incline to have the same speed as the solid cylinder at the bottom of the hill.

To solve the problem, we need to use conservation of energy, which states that the total energy of a closed system remains constant. At the top of the incline, the cylinder and sphere both have potential energy, which is converted to kinetic energy as they roll down the incline.

Since the two objects have the same mass, we only need to consider their different moments of inertia.

The potential energy at the top of the incline is equal to mgh, where m is the mass, g is the acceleration due to gravity, and h is the height of the incline. At the bottom of the incline, the potential energy is converted to kinetic energy, which is equal to (1/2)mv^2, where v is the velocity.

For the solid cylinder, the moment of inertia is (1/2)mr^2, where r is the radius. For the solid sphere, the moment of inertia is (2/5)mr^2.

Since the two objects have the same kinetic energy at the bottom of the incline, we can set their potential energies equal to each other, and solve for the height of the incline for the sphere:

mgh_cylinder = (1/2)mv_cylinder^2

mgh_sphere = (1/2)mv_sphere^2

mgh_cylinder = mgh_sphere

(1/2)mv_cylinder^2 = (1/2)mv_sphere^2

v_cylinder^2 = v_sphere^2

(1/2)mv_cylinder^2 = (1/2)mv_sphere^2

(1/2)mr_cylinder^2(v_sphere^2/r_cylinder^2) = (1/2)(2/5)mr_sphere^2(v_sphere^2/r_sphere^2)

v_sphere^2 = (5/2)(r_cylinder^2/r_sphere^2)v_cylinder^2

h_sphere = (v_sphere^2/2g)

= (5/4)(r_cylinder^2/r_sphere^2)h_cylinder

= (5/4)(1/2)^2(0.72 m)

= 0.225 m

Therefore, the solid sphere should be released from a height of 0.225 m on the incline to have the same speed as the solid cylinder at the bottom of the hill.

For more questions like Sphere click the link below:

https://brainly.com/question/14762844

#SPJ11

Answer:

Approximately [tex]31.3\; {\rm kg}[/tex]. (Assuming the friction between the skateboard and the ground is negligible.)

Explanation:

The momentum [tex]p[/tex] of an object of [tex]m[/tex] and velocity [tex]v[/tex] is:

[tex]p = m\, v[/tex].

When the boy tossed the jug of water, the change in the momentum of the jug would be:

[tex]\Delta p(\text{jug}) = m(\text{jug}) \, (v(\text{jug}) - u(\text{jug}))[/tex], where:

Hence:

[tex]\begin{aligned}\Delta p(\text{jug}) &= m(\text{jug}) \, (v(\text{jug}) - u(\text{jug})) \\ &= (8.0)\, (2.7 - 0)\; {\rm kg\cdot m\cdot s^{-1}} \\ &= 21.6\; {\rm kg\cdot m\cdot s^{-1}}\end{aligned}[/tex].

Similarly, the change in the momentum of the skateboard would be:

[tex]\Delta p(\text{board}) = m(\text{board}) \, (v(\text{board}) - u(\text{board}))[/tex], where:

Note that the velocity of the board [tex]v(\text{board})\![/tex] after the toss is opposite to that of the jug. The sign of [tex]v(\text{board})[/tex] would be opposite to that of [tex]v(\text{jug})[/tex]. Since [tex]v(\text{jug})\![/tex] is positive, the value of [tex]v(\text{board})\!\![/tex] should be negative.

[tex]\begin{aligned}\Delta p(\text{board}) &= m(\text{board}) \, (v(\text{board}) - u(\text{board})) \\ &= (1.9)\, ((-0.65)- 0)\; {\rm kg\cdot m\cdot s^{-1}} \\ &= (-1.235)\; {\rm kg\cdot m\cdot s^{-1}}\end{aligned}[/tex].

Let [tex]m(\text{boy})[/tex] denote the mass of the boy. The velocity of the boy was initially [tex]u(\text{boy}) = 0\; {\rm m\cdot s^{-1}}[/tex] and would become [tex]v(\text{boy}) =(-0.65)\; {\rm m\cdot s^{-1}}[/tex] after the toss. The change in the velocity of the boy would be:

[tex]\Delta p(\text{boy}) = m(\text{boy}) \, (v(\text{boy}) - u(\text{boy}))[/tex].

Under the assumptions, the total changes in the momentum of this system (the boy, the skateboard, and the jug) should be [tex]0[/tex]. Thus:

[tex]\Delta p(\text{boy}) + \Delta p(\text{boy}) + \Delta p(\text{jug}) = 0[/tex].

Rearrange and solve for the mass of the boy:

[tex]\Delta p(\text{boy}) = -\Delta p(\text{jug}) - \Delta p(\text{board})[/tex].

[tex]\begin{aligned} m(\text{boy}) &= \frac{-\Delta p(\text{jug}) - \Delta p(\text{board})}{v(\text{boy}) - u(\text{boy})} \\ &= \frac{-(21.6) - (-1.235)}{(-0.65) - 0}\; {\rm kg} \\ &\approx 31.3\; {\rm kg}\end{aligned}[/tex].

The current required to produce the magnetic field of 1.00 × 10^-4 Tesla in the solenoid is 0.0263 A.

The formula for the magnetic field produced by a long solenoid is given by,

B = μ0ni

where B is the magnetic field, μ0 is the magnetic constant (4π×10−7 T m A−1), n is the number of turns per unit length, and i is the current in the solenoid.

The number of turns (N) in the solenoid is 1170, the length (L) of the solenoid is 0.395 m, and the magnetic field (B) produced by the solenoid is 1.00 × 10−4 T at its center.

Number of turns per unit length (n) is given by,

n=N/L
n=1170/0.395
n=2962.03 turns/m

B = μ0ni
i = B/(μ0n)

i = (1.00 × 10−4)/(4π×10−7×2962.03)
i = 0.0263 A

Therefore, the current required in the windings of the long solenoid to produce a magnetic field of magnitude 1.00 × 10−4 T at its center is 0.0263 A.

A long solenoid has a uniform distribution of 1,170 turns over a distance of 0.395 meters, and produces a magnetic field of 1.00 × 10^-4 Tesla at its center.

B = μ0ni,

where B is the magnetic field, μ0 is the magnetic constant, n is the number of turns per unit length, and i is the current in the solenoid.

The number of turns per unit length of the solenoid. Number of turns per unit length (n) is given by: n = N/L

n = 1170/0.395 = 2962.03 turns/meter. Now that we know the number of turns per unit length, we can use the same formula to calculate the current required to produce the magnetic field of 1.00 × 10^-4 Tesla in the solenoid.

i = B/(μ0n) = (1.00 × 10^-4)/(4π × 10^-7 × 2962.03) = 0.0263 A. Therefore, the current required to produce the magnetic field of 1.00 × 10^-4 Tesla in the solenoid is 0.0263 A.

to know more about current refer here:

https://brainly.com/question/23323183#

#SPJ11

Answer

time of flight = 0.5533 seconds

horizontal range = 1.107 metres

final velocity is 5.779 m/s at 70° downwards

Step-by-Step Solution

initial horizontal velocity (ux) = 2.0 m/s

initial vertical velocity (uy) = 0

vertical displacement (sy) = -1.5 m

neglecting air friction (drag), acceleration due to gravity (g) in the vertical component, is constant (9.8 m/s²), and horizontal velocity is ALWAYS constant. i.e, acceleration=0. Now using the equations of motion for the x-component:

[tex]s=ut\\v^2=u^2\\v=u[/tex]

for the y-component:

[tex]v=u-gt\\v^2=u^2-2gs\\s=ut-\frac{1}{2}gt^2\\[/tex]

(a) the time the marble will take to reach the floor.

using an equation that we have all the data for,

[tex]s=ut-\frac{1}{2}gt^2[/tex]

-1.5 = 0 - 1/2(9.8)×t². Solving this to get t,

∴ time of flight = 0.5533 seconds

(b) the distance of the table that the marble will land.

similar to the previous question, we can use one of the equations of motion again, but this time, there's only one equation we can use:

[tex]s=ut[/tex]

s = 2×0.5533

∴ horizontal range = 1.107 metres

c. the velocity of the marble just before it reaches the floor.

For this, we require both the x and y components of final velocity, and then we can calculate the resultant vector of the two velocities, as well as the direction/angle. Since u=v in x-component, we already have Vx. To find Vy, we can use:

[tex]v=u-gt[/tex]

v = 0 - 9.8×0.5533

∴ final vertical velocity = -5.4223 m/s

Therefore, final velocity = [tex]\sqrt{Vx^2+Vy^2}[/tex]

v = √(2.0² + (-5.4223)²) = 5.779 m/s

To find direction of velocity, tan∅ = Vy/Vx

∅ = tan⁻¹(5.4223/2.0) = 70°

Therefore, final velocity is 5.779 m/s at 70° downwards

The oscillation frequency is 1.3294 Hz.

Given that,

Mass of harmonic oscillator, m = 0.25 kg

Total mechanical energy, E = 0.35 J

Oscillation amplitude, A = 0.01 m

To find out the oscillation frequency, we can use the formula;

Total mechanical energy of a simple harmonic oscillator is the sum of the kinetic energy and potential energy of the oscillator.

Hence,

E = K + PE.

Where,

K = 1/2mv² is the kinetic energy of the oscillator,

PE = 1/2kA² is the potential energy of the oscillator.

The frequency of the oscillator is given by the equation: f = 1/(2π) √k/m

From the given data,

We can find out the force constant, k from the potential energy equation,

k = 2PE/A²

 = 2 * 0.35 J/0.01²

m² = 70 J/m

Substituting the values of m and k, we can find out the frequency.

f = 1/(2π) √k/m

 = 1/(2π) √70/0.25

 = 1/(2π) √280/4

= 1/(2π) √70/1= 1/(2π) * 8.3666

= 1.3294 Hz

For similar question on frequency.

https://brainly.com/question/254161

#SPJ11