Answer:
Oxygen, nitrogen, and carbon dioxide are chemically bonded to one another.
other answer wrong coz carbon dioxide can be broken down into 1 Carbon, 2 Oxygen
Explanation:
The statement that best describes these three components of air is as follows:
Oxygen, nitrogen, and carbon dioxide are all classified as pure substances.Thus, the correct option for this question is A.
What is Air?Air may be defined as the combination of invisible, odorless, and tasteless gases such as oxygen, nitrogen, carbon dioxide, etc. that significantly surround any celestial body like the earth.
A pure substance may be characterized as a type of substance that does not have to be a single chemical element. Due to this, water, nitrogen, carbon dioxide, oxygen, etc. are the valid and most accurate examples of pure substances.
The homogeneous mixture or combination of gases like air can also be remarkably considered a pure substance. It is up to the point until there is no change of phase.
Therefore, oxygen, nitrogen, and carbon dioxide are all classified as pure substances is the statement that best describes these three components of air. Thus, the correct option for this question is A.
To learn more about the Components of air, refer to the link:
https://brainly.com/question/23486618
#SPJ2
How fast is the wind have to blow to be classified as a hurricane?
74 mph (64 KT)
Explanation:
when the wind exceeds 74 mph (64 KT), the storm is considered to be a hurricane.
Question 1
13 pts
When cells divide they ____
Answer:
multiply (make new cells)
A chemist is using a solution of hno3 that has a ph of 3.75. what is [h ] for the solution?
A chemist is using a solution of HNO₃ that has a pH of 3.75. what is [H⁺] for the solution is 1.7 × 10⁻⁴M.
How do we calculate the [H⁺]?Concentration of H⁺ ion will be calculated by using the below equation of pH as:
pH = -log[H⁺]
or [H⁺] = [tex]10^{-pH}[/tex]
Given that, pH = 3.75
So concentration of H⁺ ion will be calculated as:
[H⁺] = [tex]10^{-3.75}[/tex]
[H⁺] = 1.7 × 10⁻⁴M
Hence concentration of H⁺ ion is 1.7 × 10⁻⁴M.
To know more about pH & [H⁺], visit the below link:
https://brainly.com/question/8758541
Calculate the power developed in R1.
P1 =_____watts
48
190
240
1300
the answer will be 190
Explanation:
because R1= 0.5*0.5*8
=190
Particle theory states that particles in gases move the most particles in solids show no movement at all???
True or false
true
the can't change their shapeWhat are the types of precipitation?
Select four correct answers.
(1) dew
(2) hail
(3) wind
(4) rain
(5) sleet
(6) fog
(7) snow
(I might answer it by myself so be quick)
Answer:
Rain,Hail,Snow,sleet. Hope this helped you out!
WILL GIVE BRAINLIEST PLEASE HELP! What is the pH of a solution with a concentration of hydronium ions of 8.42 × 10–5?
Answer:
[tex]pH = -log(H3O^+) = -log(8.52E-5) = 4.+[/tex], my guess is about 4.1
Explanation:
hope this helps! :)
The Ksp of barium sulfate (BaSO4) is 1.1 × 10–10. What is the solubility concentration of sulfate ions in a saturated solution at 25°C?
1.5 × 10–5M
1.0 × 10–5M
5.5 × 10–11M
7.4 × 10–6M
Answer:
Your answer would be:
B.) 1.0 × 10–5M
Explanation:
Have a great rest of your day
#TheWizzer
Answer:
The answer is B.
Explanation:
pretty quite, when everyones acc gets deleted SMH -;-
Behavioral changes of individuals of a species that allow for better survival. (Acquired traits)
Incorrect Chlorophyll?
Natural selection is the process that selects the organism that can survive and reproduce in an altered environment. These behavioral changes are adapted.
What is adaptation?Adaptation is the part of natural selection and a trait that allows the improved organism to survive and reproduce in environmental conditions.
The adapted organism can survive and reproduce in the changed environmental conditions by the process of natural selection.
Therefore, adaptation allows for better survival through behavioral changes in individuals.
Learn more about adaptation and natural selection here:
https://brainly.com/question/1288721
#SPJ1
Which is a characteristic of a strong base? it turns pink phenolphthalein colorless. it turns blue litmus paper red. it releases h ions into a solution. it removes h ions from solution.
The characteristic of a strong base is that it removes H⁺ ions from solution.
What is strong bases?Strong bases are those substance which have a pH range in between the value of 7.1 to 14.
Strong bases changes the colorless phenolphthalein into pink color in basic medium, so first option is incorrect.Strong bases chnages red litmus paper to blue color, so second option is also incorrect.Bases not gives H⁺ ion to the solution, so it is also not correct.Strong bases removes H⁺ ion from the solution by their consumption and makes solution more basic.So, strong bases removes H⁺ ion from the solution.
To know more about strong bases, visit the below link:
https://brainly.com/question/1978436
Answer:
It removes H+ ions from solution.
Explanation:
i got it right
How many Hydrogen moles needed to get the energy to equal 1 mol of gasoline?
Answer:
1 grams Hydrogen is equal to 0.992122546977 mole.
Explanation:
Hydrogen is equal to 0.992122546977 mole.
Write a two to four sentence conclusion statement explaining how the potential energy diagram is used to identify if the reaction is endothermic or exothermic, if heat was released or absorbed, and why the sign of enthalpy change was positive of negative. There should be a conclusion statement for each graph.
Answer:
The Heat of a reaction is given as the heat content/heat of formation/enthalpies of the products minus the heat content/heat of formation/enthalpies of the reactants. If the potential energy diagram has the product(s) having a higher potential energy than the reactant(s), then the reaction is an endothermic reaction (this is why the reaction absorbs heat from the surroundings to try to make up for the lack of potential energy of the reactants) and the sign on the enthalpy change is visibly positive since H(products) > H(reactants) If the potential energy diagram has the reactant(s) having a higher potential energy than the product(s), then the reaction is an exothermic reaction (this is why the reaction releases heat to the surroundings to try to take care of the higher potential energy of the reactants) and the sign on the enthalpy change is visibly negative since H(reactants) > H(products).
Explanation:
hope it helps:)
Note 3 key dates in blood spatter history and what those dates mean to evidence today
The question relates to Blood Splatter Analysis and relates to both law and Forensic science.
What are the three key dates in Blood Splatter History?
The three key dates in Blood Splatter History and what those dates mean to evidence today are:
Learn more about Blood Spatter Analysis at:
https://brainly.com/question/27322497
The radioactive element francium undergoes a series of nuclear decays, eventually forming a stable isotope of lead. One part of the process involves
francium-221 undergoing two alpha decays, followed by a beta decay.
The element formed after this portion of the decay series is
213,84Po. This is further explained below.
What is the element formed after this portion of the decay series?Generally, when the radioactive element francium undergoes a series of nuclear decays the sum of the mass number, the atomic number, and decay particles are equal.
In conclusion, francium-221 decays to to its first beta decay to give 213,84Po
Read more about Atom
https://brainly.com/question/13981855
CQ
The radioactive element francium undergoes a series of nuclear decays, eventually forming a stable isotope of lead. One part of the process involves francium-221 undergoing two alpha decays, followed by a beta decay. What is the element formed after this portion of the decay series? (In the box below, type in the symbol using the isotope tool. An example for carbon-12 is provided.)
15. The specific heat of silver is 0.24 J/g*^ 0 C How many joules of energy are needed to warm 4.37 g of silver from 25.0C to 27.5 degrees * C ? 0.14 J 46 J 0.022 J
2.62J of energy will be required to warm a silver metal from a temperature of 25°C to 27.5°C.
How to calculate joules?The energy required in a calorimetry can be calculated using the following formula:
Q = m × c × ∆T
Where;
Q = quantity of heat absorbed or releasedm = mass of substancec = specific heat capacity∆T = change in temperatureAccording to this question, 4.37 g of silver should be heated from 25°C to 27.5°C. The heat required is as follows:
Q = 4.37 × 0.24 × (27.5 - 25)
Q = 1.0488 × 2.5
Q = 2.62J
Therefore, 2.62J of energy will be required to warm a silver metal from a temperature of 25°C to 27.5°C.
Learn more about energy at: https://brainly.com/question/1932868
We looked at the acrylonitrile molecule, c3h3n, in the previous exercise. Which of the following statements about the molecule is or are true? i. The c—c single bond results from overlap between an sp hybrid and an sp 2 hybrid. Ii. There are two unhybridized p orbitals on the n atom. Iii. All the atoms in the molecule lie in the same plane.
The true statemments that reflect the nature of the compound are statements (i) and (ii).
What is acrylonitrile?The molecule acrylonitrile has thre carbon and hydrogen atoms and one nitrogen atom. The c—c single bond results from overlap between an sp hybrid and an sp 2 hybrid. Also, there are two unhybridized p orbitals on the N atom.
Hence; among the options, the true statemments that reflect the nature of the compound are statements (i) and (ii).
Learn more about acrylonitrile: https://brainly.com/question/13731887
The diagram below shows the branching tree diagram for humans. The text box below it shows the set of derived shared characteristics for the branching tree.
A slanting, horizontal line is shown. On the extreme left, there is a label that says Common Ancestor. Along the slanting, horizontal line there are five dots labeled from left to right as 1, 2, 3, 4, and 5. There is one vertical line between each of the consecutive five dots. The lines are labeled from left to right as Perch, Frog, Pigeon, Rats, and Human. A text box below the branching tree diagram is labeled Derived Shared Characteristics. In the box it says from left to right, Terrestrial during all stages, Jaws, Walking on two legs, Mammary glands and hair, and Four limbs.
Look at the possible derived shared characteristics, shown in the text box. Think about where these should be placed along the branching tree diagram. From the text box, select a shared derived characteristic that humans and rats have. Explain why you think humans and rats share this characteristic.
Answer:
I would write "terrestrial/lives on land during all life stages" between the frog and pigeon branches
Explanation:
Jaw evolution has started with fish, so i'd place that before the perch, evolution of four limbs is next and I would plate it between the perch and the frog. Evolution of an egg has ensured that organisms remain terrestrial during all stages of life and don't need to rely on water to lay their eggs. So I would place that between the frog and the pigeon. True mammary glands and true hair, as we know it formed on mammals so i'd place that between the pigeon and the rats (although synapsids evolved similar structures long before birds even existed). And lastly, I would place "walking on two legs" between rats and human branches. Because our ancestors evolved bipedalism relatively late.
How much energy is given off by the following reaction, if 162.5 g of oxygen reacts with excess ammonia (NH3)? 4 NH3 + 5 O2 + 4 NO + 6 H2O AH = -1225.6 kJ
From the enthalpy values, 1244.8 kJ of heat is given off when 162.5 g of oxygen reacts with excess ammonia.
What is the amount of heat given off in a reaction?The amount of heat given off in a reaction is known as enthalpy change.
Heat is given off in an exothermic reaction.
From the enthalpy value of the given reaction, 1225
6 kJ of heat is given off when 5×32 g or 160 g of oxygen reacts with ammonia.
Amount of heat given off when 162.5 g of oxygen reacts with excess ammonia is;
Heat given off = 1225.6 kJ × 162.5/160 = 1244.8 kJ
Therefore, 1244.8 kJ of heat is given off when 162.5 g of oxygen reacts with excess ammonia.
Learn more about enthalpy at: https://brainly.com/question/14047927
#SPJ1
Which of the following diagrams represents a single
replacement reaction?
Answer: A
Explanation:
trust me i did it
Is this statement true or false?
Decomposers such as bacteria recycle dead tissue into reusable chemicals for other producers. Then the consumers eat the producers. This is an example of how nutrients are recycled through an ecosystem
It is true that decomposers such as bacteria recycle dead tissue into reusable chemicals for other producers, which are then eaten by consumers.
What is nutrient recycling?Nutrient recycling is the process by which essential elements in the ecosystem are in transition between abiotic and biotic factors.
In an ecosystem, the following groups of organisms exists:
Producers e.g plantsConsumers e.g. herbivores, carnivoresDecomposers e.g. bacteria, fungiDecomposers are responsible for breaking down dead tissues of living organisms leading to the release of nutrients to the soil. These nutrients are used by producers, which are then eaten by consumers.
Learn more about nutrient recycling at: https://brainly.com/question/1410462
carbon monoxide reacts with iron (ii, iii) oxide (fe3o4) making iron and carbon dioxide. when a student performed the experiment she reacted 70.0 g of fe3o4 with 70.0 g of co and the actual yield of iron was 41.9. calculate the percentage yield.
Please help me!
The percent yiled shows the extent of conversion of reactants to products. The percent yiled here is 83.1%.
Percent yieldThe percent yiled in a reaction is calculated as te ratio of the actual yield to the theoretical yiled multiplied by 100.
Hence the balanced reaction equation is; Fe3O4 + 4CO → 3Fe + 4CO2.
Number of moles of Fe3O4 = 70.0 g/232 g/mol = 0.3 moles
Number of moles of CO = 70.0 g/28 g/mol = 2.5 moles
If 1 mole of Fe3O4 reacts with 4 moles of CO
x moles of Fe3O4 reacts with 2.5 moles of CO
x = 0.6 moles
Hence, Fe3O4 is the limiting reactant.
Now;
1 mole of Fe3O4 yileds 3 moles of Fe
0.3 moles of Fe3O4 yileds 0.3 moles * 3 moles/1 mole = 0.9 moles
Mass of Fe produced = 0.9 moles * 56 g/mol = 50.4 g
Percent yield = 41.9 g/ 50.4 g * 100/1 = 83.1%
Learn more about percent yiled: https://brainly.com/question/2862527
What is the residue when the reaction mixture is filtered
Answer:
Filtration can be used to separate an insoluble solid from a liquid, or a precipitate from the reaction mixture in which it formed. The solid which collects in the filter paper is called the residue. The clear liquid which passes through the filter paper is called the filtrate.
Explanation:
i had this question before
a
a
4. Suppose the temperature inside a sealed container increases. How do you
expect this change to affect the partial pressure of each gas in a mixture of
gases inside the container? How does it affect the total pressure?
Answer:
The volume of the system will change and maybe the shape of the system boundary
A mixture of two gases with a total pressure of 8.00 atm contains 0.60 atm of Gas A. What is the partial pressure of Gas B
Answer:
Pt = Total pressure, Pa = Gas A and Pb = Gas B
Pt = Pa + Pb
Pt - Pa = Pb
Explanation:
Pb = Pt - Pa
Pb = 8.00 atm - 0.60 atm
Pb = 7.4 atm
The total pressure of a gaseous mixture is the sum of pressure of its component gases. Thus the partial pressure of gas B in the mixture of total pressure 8 atm containing 0.60 atm A is 7.4 atm.
What is partial pressure ?Partial pressure of a component gas in a mixture of gases is the contribution of that gas to the overall pressure or total pressure of the mixture.
Let the a mixture contains n number of gases and each with a pressure of P1, P2 etc.Then the total pressure be written as follows:
[tex]\rm P_{total} = \sum P_{i} = \sum P_{1} + P_{2}+ P_{3} .....[/tex]
Here the mixture containing gas A and B with partial pressure Pa and Pb. The total pressure of the gas is given 8 atm and Pa is given 0.60 atm . Thus,
[tex]\rm P_{total} = P_{a} + P_{b}[/tex]
8 atm = 0.60 + Pb
Pb = 8 - 0.6 = 7.4 atm.
Hence, the partial pressure of gas B os 7.4 atm.
To find more about partial pressure, refer the link below:
https://brainly.com/question/15075781
#SPJ5
Which term describes this reaction? 2 central carbons double bonded to each other, with h above right and left and below right and left plus upper c l single bond upper c l right arrow 2 central c single bonded to each other; each is single bonded to upper c l above, and to h below and to the outside. addition condensation elimination substitution
Answer:
Which term best describes this reaction?
CH₃ H ┌ CH₃ H ┐
│ │ │ │ │ │
n C ═ C ➝ ├ C ── C ┤
│ │ │ │ │ │
H H └ H H ┘
❌ A) condensation polymerization
✔️ B) addition polymerization❌ C) hydrohalogenation
❌ D) hydration
I Took Question Test And Have Nice Day.
Answer:
The best answer out of the 4 Would be A. Addition
Explanation:
I took the Test.
What are three disadvantages of visible light
Answer:
Eye Health Problems.
Vision-Related Accidents.
Deterioration of Materials.
Explanation:
The pressure needed to pump blood back to the heart is produced by the _____.
A. body muscles
B. contracting arteries
C. heart
Answer:
A. body muscles
The pressure needed to pump blood back to the heart is produced by the body muscles .
If the carbon atom of each of the incoming CO2 molecules is labeled with a radioactive isotope of carbon, which organic molecules will be radioactively labeled after one cycle
Answer:
B, C, D, and E
Explanation:
Which of the following aqueous solutions will have a pH that is significantly different from the rest?
0.1 M H 2SO 4
0.1 M HNO 3
0.1 M HC 2H 3O 2
0.1 M HCl
Among the given aqueous solutions, the solution with a significantly different pH from the rest is 0.1 M HC₂H₃O₂ (acetic acid).Option C
H₂SO₄ (sulfuric acid), HNO₃ (nitric acid), and HCl (hydrochloric acid) are strong acids that dissociate completely in water. They produce a high concentration of H₃O⁺ ions, resulting in a low pH. Acetic acid, on the other hand, is a weak acid that only partially dissociates in water. It produces a smaller concentration of H₃O⁺ ions, resulting in a higher pH compared to the strong acids.
When a strong acid like HCl, H₂SO₄, or HNO₃ is dissolved in water, it completely dissociates to release H₃O⁺ ions. The resulting solution will have a very low pH, usually close to 0. However, acetic acid (HC₂H₃O₂) only partially dissociates, and the concentration of H₃O⁺ ions is lower. As a weak acid, it has a higher pH compared to strong acids, typically around 2.4.
In summary, among the given options, the aqueous solution of 0.1 M HC₂H₃O₂ (acetic acid) will have a significantly different pH from the rest, with a higher pH value due to its weak acid nature.
Option C
For more such question on aqueous solutions visit:
https://brainly.com/question/19587902
#SPJ8
Suppose a balloon contains a mixture of helium nitrogen and oxygen gas is a pressure exerted by the mixture is 101.2 KPA the partial pressure of helium is 80.1 KPA and the part of coal pressure of nitrogen is 16.2 KPA what is the partial pressure of oxygen in the balloon
giving lots of points
Answer:
4.9 kPa
Explanation:
Dalton's law of partial pressures states that the total pressure of a mixture of gases is the sum of the partial pressures of the individual gases.
In other words:
[tex]\displaystyle P_T = P_\text{O$_2$} + P_\text{N$_2$} + P_\text{He}[/tex]
The total pressure is 101.1 kPa. The partial pressure of He is 80.1 kPa. The partial pressure of N₂ is 16.2 kPa. Substitute and solve for O₂:
[tex]\displaystyle \begin{aligned} (101.2\text{ kPa}) & = P_\text{O$_2$} + (16.2\text{ kPa}) + (80.1\text{ kPa}) \\ \\ P_\text{O$_2$} & = 4.9\text{ kPa}\end{aligned}[/tex]
In conclusion, the partial pressure of oxygen in the balloon is 4.9 kPa.