The distance from the left support is greater than 49/9 meters, then the plank will tip over.
When responding to questions on the Brainly platform as a question-answering bot, it is important to be factually accurate, professional, friendly, and concise. Irrelevant parts of the question or typos should not be ignored.
Additionally, using relevant terms from the question in the answer is important to ensure that the answer is clear and specific.Here is a possible answer to the student question: Adrienne (50 kg) and Bo (90 kg) are playing on a 100 kg rigid plank resting on supports.
If Adrienne stands on the left end, can Bo walk all the way to the right end without the plank tipping over? If not, how far can he get past the support on the right?Assuming that the plank is uniform and mass is distributed uniformly,
the weight of the plank can be taken to be halfway between Adrienne and Bo, which is 70 kg. Using the principle of moments, the torque due to Adrienne is equal to the torque due to Bo when the plank is balanced. Thus,
the product of the weight and distance of Adrienne from the pivot point (left support) is equal to the product of the weight and distance of Bo from the pivot point. Therefore,50 kg × d1 = 90 kg × d2where d1 and d2 are the distances of Adrienne and Bo from the left support, respectively.
The total distance of the plank from left to right is L, which is the sum of the distances from the left support to the right support, and is 2d2. Thus, L = 2d2.
When the plank is about to tip over, the torque due to Bo is equal to the maximum torque that the plank can withstand before tipping over, which is the product of half the weight of the plank and half the length of the plank, that is,70 kg × L/2.
Therefore,90 kg × d2 = 70 kg × L/2.
Substituting L = 2d2,
we obtain90 kg × d2 = 70 kg × 2d2/2= 70 kg × d2Bo can walk all the way to the right end without the plank tipping over if his distance from the left support, d2, is less than or equal to 49/9 meters (approximately 5.44 meters).
This means that he can walk 50/9 meters (approximately 5.56 meters) past the right support before the plank tips over.
To learn more about : meters
https://brainly.com/question/16711477
#SPJ11
which of the following statements about gravitational waves are true? select all that apply. which of the following statements about gravitational waves are true?select all that apply. the emission of gravitational waves from merging black holes is predicted by newton's universal law of gravitation. two orbiting neutron stars or black holes will gradually spiral toward each other as a result of energy being carried away by gravitational waves. the emission of gravitational waves from merging black holes is predicted by einstein's general theory of relativity. scientists seek to detect gravitational waves by using powerful gamma-ray telescopes. although gravitational waves are an important theoretical prediction, we do not yet have any observational evidence that they exist. the first direct detection of gravitational waves, announced in 2016, came from the ligo observatory. submit
The correct statements regarding gravitational waves are: The emission of gravitational waves from merging black holes is predicted by Einstein's General Theory of Relativity, Two orbiting neutron stars or black holes will gradually spiral toward each other as a result of energy being carried away by gravitational waves, The first direct detection of gravitational waves, announced in 2016, came from the LIGO observatory.
The correct options are (B), (C) and (F).
Einstein's General Theory of Relativity predicts the production of gravitational waves from merging black holes. According to the theory, any two heavy objects that circle one other will cause ripples in spacetime that propagate away as gravitational waves.
As a result of gravitational waves carrying away energy, two circling neutron stars or black holes will progressively spiral towards one other. The gravitational waves increase stronger as they go closer, driving the objects to spiral faster and faster until they ultimately join.
The Laser Interferometer Gravitational-Wave Observatory (LIGO) claimed the first direct detection of gravitational waves in 2016. The discovery validated Einstein's theory and opened the door to a new technique of investigating the cosmos.
Therefore, options B, C and F are correct.
For more such questions on gravitational waves, click on:
https://brainly.com/question/975043
#SPJ11
in this lab, after the circuit is setup what waveform will we choose from the function generator? group of answer choices square wave sinusiodal linear none
If the goal of the lab is to investigate the behavior of the circuit under steady-state conditions, a sinusoidal waveform is often used. Here option B is the correct answer.
A sinusoidal waveform oscillates between positive and negative voltage levels in a smooth, repetitive pattern, and is commonly used to represent AC voltage signals. By varying the frequency and amplitude of the sinusoidal waveform, different aspects of the circuit's behavior can be investigated, such as its response to different frequencies and amplitudes of AC signals.
On the other hand, if the goal of the lab is to investigate the transient behavior of the circuit, such as its response to sudden changes in voltage levels, a square wave may be used. A square wave alternates between two voltage levels, typically 0 V and a non-zero voltage level, with a fast rise time and fall time. By varying the frequency and duty cycle of the square wave, different aspects of the circuit's response to sudden changes can be investigated.
If the experiment requires a linearly varying voltage signal, a ramp or triangle wave can be used. These waveforms have a linearly varying voltage level over time and can be used to investigate the circuit's response to a changing DC voltage level.
To learn more about sinusoidal waveform
https://brainly.com/question/31102187
#SPJ4
Complete question:
In this lab, after the circuit is set up what waveform will we choose from the function generator? group of answer choices
A - square wave
B - sinusoidal wave
C - linear wave
D - none
Match the vocabulary words to its correct definitions.
Column A
2.
3.
पं
5.
6.
The combination of fat-free mass and fat mass
The ability of the heart, blood, blood vessels and
lungs to supply enough oxygen and necessary
fuel to the muscles during long periods of
physical activity
The muscles ability to move a joint through a
full range of motion
The ability of a muscle or muscles to repeat a
movement many times or hold a position
without stopping to rest
The ability of a muscle or muscles to push or
pull with its total force
An activity that places an additional force
against the muscle or muscle group
Column B
a. Muscular Endurance
b. Body composition
c. Flexibility
d. Muscular Strength
e. An activity that places an additional force against the
muscle or muscle group
f. Resistance Training
g. Cardiorespiratory Endurance
2. The ability of the heart, blood, blood vessels, and lungs to supply enough oxygen and necessary fuel to the muscles during long periods of physical activity - g. Cardiorespiratory Endurance.
What are the muscles?
Muscles are specialized tissues in the human body that are responsible for movement, stability, and maintaining posture. There are three types of muscles in the body: skeletal, cardiac, and smooth muscles.
3. The muscle's ability to move a joint through a full range of motion - c. Flexibility
पं - This word is not provided in the question.
4. The ability of a muscle or muscles to repeat a movement many times or hold a position without stopping to rest - a. Muscular Endurance
5. The ability of a muscle or muscles to push or pull with its total force - d. Muscular Strength
An activity that places an additional force against the muscle or muscle group - f. Resistance Training
To know more about muscles, visit:
https://brainly.com/question/9883108
#SPJ1
LeBron James, high in the air, drops a 0.60-kg basketball so that it reaches the floor falling vertically at 6.0 m/s. The ball rebounds upward at a speed of 5.2 m/s. Determine the ball's change in momentum ( magnitude and direction). Determine the average net force exerted by the floor on the ball if the collision lasts 0.12s.
The average net force exerted by the floor on the ball during the collision is 26 N.
How can I calculate the average?Average The arithmetic mean is determined by adding a set of numbers, dividing by their count, and then taking the result. The average of 2, 3, 4, 5, 7, and 10 is 5, which is the outcome of 30 divided by 6.
The momentum equation can be used to determine the ball's shift in momentum:
Δp = m(v2 - v1)
Δp = (0.60 kg)(5.2 m/s - 0 m/s)
Δp = 3.12 kg m/s
Utilizing the impulse-momentum theory, we can determine the average net force the floor applied to the ball during the collision:
J = Δp
F_avg * t = Δp
F_avg = Δp / t
where t is the time duration of the collision, which is given as 0.12 seconds.
F_avg = Δp / t = (3.12 kg m/s) / (0.12 s)
F_avg = 26 N
To know more about net force visit:-
https://brainly.com/question/18109210
#SPJ1
So could distance be determined strictly from the intensity of a star’s radiation?
No, the distance to a star cannot be determined strictly by the intensity of its radiation.
What is Star radiation?Stars emit radiation in the form of electromagnetic waves across the entire electromagnetic spectrum. This includes everything from radio waves, microwaves, and infrared radiation to visible light, ultraviolet radiation, X-rays, and gamma rays. The specific types and amounts of radiation emitted by a star depend on its temperature, size, age, and other properties.
Most of the radiation emitted by stars is in the form of visible light, which is what allows us to see them in the night sky. The colors of stars, ranging from red to blue, indicate their temperature, with cooler stars appearing redder and hotter stars appearing bluer.
In addition to visible light, stars also emit ultraviolet radiation, which can cause damage to living cells and is absorbed by the Earth's atmosphere. X-rays and gamma rays are also emitted by some stars, particularly those that are very hot or undergoing extreme nuclear reactions, and can only be detected with specialized telescopes.
The radiation emitted by stars plays an important role in shaping the universe, influencing the formation and evolution of galaxies, stars, and planets. It is also the source of energy that powers life on Earth, as it is ultimately responsible for driving photosynthesis in plants and other organisms.
Here in the Question,
The intensity of a star's radiation can provide valuable information about its properties, such as its luminosity and surface temperature, distance estimation requires additional measurements and calculations.
One way to determine the distance to a star is through the method of parallax. This involves observing the apparent shift in a star's position against the background of more distant stars as the Earth moves in its orbit around the Sun. The amount of shift is measured and used to calculate the star's distance.
Another method is the use of standard candles, which are objects of known intrinsic brightness, such as certain types of supernovae or Cepheid variable stars. By comparing the observed brightness of a standard candle with its known intrinsic brightness, astronomers can determine its distance based on the inverse square law of radiation, which states that the intensity of radiation decreases with the square of the distance.
Therefore, while the intensity of a star's radiation provides important information about its properties, it is not sufficient to determine the star's distance, which requires additional measurements and calculations.
To learn about thermal energy click:
https://brainly.com/question/14193449
#SPJ2
3. Which of the figures contain unconformities?
The figure that contains unconformities is the figure with both vertical and horizontal lines on it (top left).
What are unconformities in geology?In geology, an unconformity is a gap or break in the rock record that represents a period of time during which no new sediment was deposited, or the existing rock was eroded. Unconformities can be caused by a variety of geological processes, including tectonic uplift, erosion, sea level changes, and volcanic activity.
Unconformities are important features in geology because they provide clues to the geological history of an area. By studying the nature and location of unconformities, geologists can reconstruct the sequence of events that led to the formation and deformation of the rock layers, and can gain insights into the tectonic and environmental processes that shaped the Earth's surface over time.
Find out more on unconformity here: https://brainly.com/question/1578509
#SPJ1
Using your knowledge of the difference between the three different temperature scales what do you think would happen of the humans body temperature were 98.6 C? Make a claim about why doctors worry more about a fever of a couple of degrees Celsius than a fever of a couple of degrees Fahrenheit.Provide evidence to support your claim, and explain your reasoning
Doctors are more concerned about a fever of a few degrees Celsius than a fever of a few degrees Fahrenheit because variations in body temperature are more easily understood and tracked in Celsius, which is the more popular and accurate temperature measure in the medical world.
If the human body temperature were 98.6 C (209.48 F), it would be a life-threatening condition because the temperature is well above the boiling point of water, and proteins in the body would denature, leading to irreversible damage to organs and tissues. In reality, a body temperature of 98.6 degrees Fahrenheit (37 degrees Celsius) is considered normal, while a fever is defined as a temporary increase in body temperature above this level.
Doctors worry more about a fever of a couple of degrees Celsius than a fever of a couple of degrees Fahrenheit because Celsius is the more widely used temperature scale in the medical community, and changes in body temperature are better understood and monitored in Celsius. Additionally, Celsius is a more precise temperature scale than Fahrenheit, with each degree Celsius representing a smaller change in temperature than each degree Fahrenheit. For example, a fever of 38.5 degrees Celsius (101.3 degrees Fahrenheit) is a more significant increase in body temperature than a fever of 100.4 degrees Fahrenheit, which is only 1.8 degrees Fahrenheit above normal.
Learn more about Fahrenheit here:
https://brainly.com/question/30719934
#SPJ1
the bird perched on the swing in the figure has a mass of 49 g, and the base of the swing has a mass of 142.1 g. assume that the swing and the bird are originally at rest and that the bird then takes off horizontally at 2.27 m/s. the acceleration of gravity is 9.8 m/s 2 . if the base can swing freely (without friction) around the pivot, how high will the base of the swing rise above its original level? answer in units of m.
The base of the swing will rise above its original level by a height of 0.2522 m m.
As the bird perched on the swing in the figure has a mass of 49 g, and the base of the swing has a mass of 142.1 g. Assume that the swing and the bird are originally at rest and that the bird then takes off horizontally at 2.27 m/s. The acceleration of gravity is 9.8 m/s².
Answer in units of m. The base of the swing will rise above its original level by 1.047 m, provided the bird perched on the swing has a mass of 49 g, and the base of the swing has a mass of 142.1 g. The method to find out the result is as follows: We will use the principle of conservation of energy to solve this problem.
We can conclude that the total mechanical energy of the system is conserved since the system consists of the swing and the bird. In other words, at the initial and final states, the sum of kinetic energy and potential energy remains the same.
Thus,
Ki + Ui = Kf + Uf
where Ki and Ui represent the initial kinetic and potential energy and Kf and Uf represent the final kinetic and potential energy.
Ki = 0 since the bird and the swing are at rest initially.'
Kf = 1/2 m(v²)
where m is the total mass of the system and v is the horizontal velocity of the bird.
Kf = 1/2 (0.1421+0.049) (2.27)²
=> 0.477 JUi
= mgh
where h is the maximum height attained by the base of the swing and g is the acceleration due to gravity. Since the bird is taking off horizontally, we know that its motion does not affect the height of the swing, so we can assume that the bird is absent.
Uf = mgh
where m is the total mass of the system and g is the acceleration due to gravity.
Since the swing and the bird are at the same height when the bird takes off,
Ui = 0.If
= 0.1421(9.8)h + 0.049(9.8)h
= 0.137hSolve for h,
we get;
h = 3.455/0.137
h = 25.22 cm
h = 0.2522 m
To learn more about Height :
https://brainly.com/question/28308143
#SPJ11
what is the direction of the current in this solenoid, as viewed from the top? a. clockwise b. counterclockwise
Using the right-hand rule, we can conclude that the direction of the current in the solenoid, as viewed from the top, is counter-clockwise. Therefore, the correct answer is option (B) "counterclockwise."
The direction of the current in a solenoid, as viewed from the top, depends on the orientation of the solenoid and the direction of the magnetic field.
Assuming the solenoid is oriented vertically, with the top of the solenoid pointing upwards and the bottom pointing downwards, the direction of the current can be determined using the right-hand rule.
If we wrap our right hand around the solenoid with our fingers in the direction of the current (i.e. counter-clockwise, as viewed from the top), then our thumb will point in the direction of the magnetic field inside the solenoid.
By convention, the magnetic field inside a solenoid is directed from south to north (i.e. from the bottom of the solenoid to the top), so if we look down on the top of the solenoid, the magnetic field will be pointing downwards.
To learn more about solenoids
https://brainly.com/question/15504705
#SPJ4
the escape speed from a very small asteroid is only 34 m/s. if you throw a rock away from the asteroid at a speed of 43 m/s, what will be its final speed?
The final speed of the rock is approximately 2.1 km/s.
We can use the formula for escape velocity to find the height of the rock above the asteroid's surface. The escape velocity is given by the formula:
v_esc = sqrt(2GM/R)
where G is the gravitational constant, M is the mass of the asteroid, and R is the radius of the asteroid.
Rearranging the formula,
R = GM/v_esc^2
Substituting the given values,
R = (6.67 x 10^-11 Nm^2/kg^2) x (10^15 kg) / (34 m/s)^2
R = 2.26 x 10^6 m
Therefore, the height of the rock above the asteroid's surface is:
h = R - radius of asteroid
h = 2.26 x 10^6 m - (radius of asteroid)
Now, we can use the conservation of energy to find the final speed of the rock:
(1/2)mv^2 = mgh
Solving for v,
v = sqrt(2gh)
Substituting the given values, we get:
v = sqrt(2 x 9.81 m/s^2 x (2.26 x 10^6 m - (radius of asteroid)))
Asteroid radius = 1 km,
v = sqrt(2 x 9.81 m/s^2 x (2.26 x 10^6 m - (1)))
v = 2.1 km.
To know more about escape speed, here
brainly.com/question/15052554
#SPJ4
--The complete question is, the escape speed from a very small asteroid is only 34 m/s. if you throw a rock away from the asteroid at a speed of 43 m/s and radius 1 km, what will be its final speed?--
the period of a circular motion is directly proportional to the frequency of that motion. group of answer choices true false
The statement "the period of a circular motion is directly proportional to the frequency of that motion" is true. The circular motion is a movement in which an object moves in a circular path.
The direction of the circular motion is always changing, but the distance from the center remains constant. The period of circular motion is defined as the time it takes for one full revolution of the object, while the frequency of circular motion is defined as the number of complete revolutions the object makes in a given time interval.
This is because the period and frequency are inversely related to each other, meaning that if one value increases, the other value decreases, and vice versa.
This relationship can be represented by the equation: T = 1/f where T is the period and f is the frequency. Since this equation is inverse, it means that T and f are inversely proportional. Therefore, the statement is true.
To know more about frequency, refer here:
https://brainly.com/question/29739263#
#SPJ11
a 4.25 103-kg rocket takes off from the moon where the acceleration due to gravity is 1.60 m/s2 by exhausting 8.40 kg of gas per second at a speed of 2.20 103 m/s. determine the acceleration of the rocket.
The acceleration of the rocket can be determined using Newton's second law of motion.
This law states that the net force acting on an object is equal to its mass multiplied by its acceleration, or F = ma. The net force acting on the rocket is equal to the thrust generated by the exhaust gas, minus the gravitational force. The thrust generated by the exhaust gas is equal to the rate of change of momentum of the gas, which is equal to the mass of the gas multiplied by the exhaust speed.
Thus, the acceleration of the rocket can be calculated as a = (m_gas*v_exhaust - m_rocket*g)/m_rocket, where m_gas is the mass of the gas being exhausted, v_exhaust is the exhaust speed, m_rocket is the mass of the rocket and g is the acceleration due to gravity. Using the given values, the acceleration of the rocket is calculated to be 7.97 m/s2.
Know more about Acceleration here
https://brainly.com/question/12550364#
#SPJ11
what magnetic force (magnitude and direction) do the two wires exert on one another?is the force large enough to stress the insulation holding the wires together
Parallel wires carrying current in the same direction experience a perpendicular magnetic force that depends on the distance between them, the current, and magnetic field strength. The force's strength may cause insulation stress, but this depends on these factors.
To determine the magnetic force exerted between two wires carrying current, we need to apply the right-hand rule for magnetic fields.
Assuming the two wires are parallel and carrying current in the same direction, the magnetic field around each wire will be circular and will point in the same direction for both wires. If we imagine holding our right hand with the fingers pointing in the direction of the current in one wire, the thumb will point in the direction of the magnetic field around that wire. The magnetic field will then be pointing towards the other wire.
Now, if we imagine the magnetic field around the second wire and again use the right-hand rule, we see that the magnetic field will be pointing towards the first wire. The two magnetic fields will be interacting, creating a force that is perpendicular to both the magnetic fields and the direction of the current. This force is known as the Lorentz force.
The magnitude of the force can be calculated using the following formula: F = BIL, where F is the force, B is the magnetic field strength, I is the current, and L is the length of the wire. The direction of the force can be determined using the right-hand rule.
The force between the wires will depend on the distance between them, the current flowing through them, and the magnetic field strength. If the wires are close enough together and carrying a large enough current, the force may be significant enough to stress the insulation holding the wires together.
In conclusion, without more specific information about the current, distance between the wires, and the insulation properties, it is difficult to determine whether the magnetic force will be large enough to stress the insulation holding the wires together.
Learn more about Magnetic Force :
https://brainly.com/question/29569933
#SPJ4
the main limitation on the efficiency of heat engines is due to group of answer choices the second law of thermodynamics. the first law of thermodynamics. environmental radical people. reaction forces due to newton's third law. friction in the moving parts.
Option 5: the main limitation on the efficiency of heat engines is due "friction in the moving parts of the engine can contribute to losses in efficiency. Lubrication and other measures can help to reduce these losses."
Heat engines, including internal combustion engines, are limited in their efficiency by the Second Law of Thermodynamics. This law states that in any energy transfer or conversion, some energy will be lost to the environment as waste heat. The first law of thermodynamics is also relevant here, as it states that energy cannot be created or destroyed, only transferred or converted from one form to another.
Environmental radical people, reaction forces due to Newton's Third Law, and other factors are not typically significant limitations on the efficiency of heat engines.
However, Option 5 is the correct answer "friction in the moving parts of the engine can contribute to losses in efficiency. Lubrication and other measures can help to reduce these losses."
For more such questions on friction
brainly.com/question/24338873
#SPJ11
sunlight intensity is called select one: a. glow b. energy c. irradiance d. luminosity
Answer: C (Irradiance)
Explanation:
It is a fact
The term for sunlight intensity is called "irradiance." (C)
Sunlight intensity, or irradiance, is a measure of the amount of solar energy falling on a surface per unit of time, typically expressed in watts per square meter (W/m²). It is an important factor to consider in various fields, such as solar energy production, agriculture, and climate studies.
Irradiance can vary depending on factors such as time of day, geographic location, and atmospheric conditions.
Unlike glow, which refers to a gentle light, or luminosity, which describes the amount of light emitted by an object, irradiance specifically focuses on the power of sunlight reaching a given surface.
To know more about luminosity click on below link:
https://brainly.com/question/20105593#
#SPJ11
which laws of physics, if any, distinguish between the backward and the forward direction in time? group of answer choices the second law of thermodynamics but not the law of conservation of energy. the law of conservation of energy and the second law of thermodynamics. newton's law of motion. none. the law of conservation of energy but not the second law of thermodynamics.
The correct answer is: the second law of thermodynamics but not the law of conservation of energy.
The second law of thermodynamics is the fundamental law that distinguishes between the forward and backward directions of time. It states that the total entropy (disorder) of an isolated system will always increase over time in the forward direction. In the backward direction, entropy would decrease, which violates the second law.
The law of conservation of energy, on the other hand, does not distinguish between the forward and backward directions of time. It simply states that energy can neither be created nor destroyed, but only transformed from one form to another.
For more questions like thermodynamics visit the link below:
https://brainly.com/question/13002079
#SPJ11
an aerodynamicist wants to model the fluid as seen by a stationary observer. what view best represents the model used by the aerodynamicist? question 12 options: a) lagrangian b) eulerian c) lagrangian and eulerian d) arbitrary lagrangian-eulerian
An aerodynamicist wants to model the fluid as seen by a stationary observer presents the Eulerian view.
The Eulerian model is used to describe the motion of fluids, and it is based on a fixed point of observation. Eulerian viewpoint is the most frequently used fluid-dynamic perspective in the study of fluid motion. It is used to calculate the fluid's physical properties, including pressure, density, and temperature, as well as the motion of fluids in space and time.
In an Eulerian framework, fluid motion is observed from a fixed point, with the fluid and observer being two separate entities.
Hence, an aerodynamicist wants to model the fluid as seen by a stationary observer presents the Eulerian view.
To know more about Eulerian model, refer here:
https://brainly.com/question/28357993#
#SPJ11
what sign for δs do you expect when the pressure on 0.860 mol of an ideal gas at 350 k is increased isothermally from an initial pressure of 0.760 atm ?
The answer is that we expect a positive sign for δs when the pressure on 0.860 mol of an ideal gas at 350 k is increased isothermally from an initial pressure of 0.760 atm
Assuming the process is reversible, the change in entropy can be calculated using the equation:
ΔS = nR ln(P₂/P₁)
where ΔS is the change in entropy, n is the number of moles of gas, R is the gas constant, P₁ is the initial pressure, and P₂ is the final pressure.
Substituting the given values, we get:
ΔS = (0.860 mol)(8.314 J/(mol*K)) ln(0.860 atm / 0.760 atm)
ΔS ≈ 0.109 J/K
Since the temperature is constant (isothermal process), the sign of ΔS is positive. Therefore, the answer is that we expect a positive sign for δs.
To learn more about isothermally here:
https://brainly.com/question/30036683
#SPJ11
to create a band pass filter from an inverting op amp configuration, one has to: group of answer choices add a capacitor in series with the input resistance add a capacitor in parallel with the feedback resistor both a and b none of the above
To create a band pass filter from an inverting op amp configuration, one has to add a capacitor in parallel with the feedback resistor.
In an inverting op amp configuration, the input signal is applied to the inverting input terminal of the op amp through a resistor (R1), and the output signal is fed back to the inverting input terminal through a feedback resistor (R2).
To create a band pass filter, a capacitor is added in parallel with the feedback resistor. The capacitor blocks DC signals from the input, and allows AC signals to pass through to the output. The values of R1, R2, and the capacitor determine the center frequency and bandwidth of the filter.
Adding a capacitor in series with the input resistance would create a high pass filter, allowing only high frequency signals to pass through. Adding a capacitor in parallel with the input resistance would create a low pass filter, allowing only low frequency signals to pass through.
To know more about band pass filter, refer here:
https://brainly.com/question/27312673#
#SPJ11
If a circuit is connected across a 120-V battery and has a resistance of 285 Ω, what is the current through the circuit and the power dissipated by the circuit?
Answer:
50.5 W
Explanation:
Using Ohm's Law, we can find the current through the circuit:
I = V/R
where I is the current, V is the voltage, and R is the resistance.
Substituting the given values, we get:
I = 120 V / 285 Ω
I ≈ 0.421 A
So the current through the circuit is approximately 0.421 A.
The power dissipated by the circuit can be found using the formula:
P = VI
where P is power, V is voltage, and I is current.
Substituting the given values, we get:
P = 120 V × 0.421 A
P ≈ 50.5 W
So the power dissipated by the circuit is approximately 50.5 W.
faraday's law tells us that group of answer choices a changing electric field creates a magnetic field. magnetic fields create electric fields. a changing magnetic field creates an electric field. charges create electric fields. moving charges create magnetic fields.
Faraday's law tells us that a changing magnetic field creates an electric field.
The fundamental law that describes how the emf is induced in the electrical conductor is Faraday's law of induction. Faraday's law of induction states that an alteration in the magnetic field surrounding an electrical conductor will cause an emf to occur across the conductor.
The rate of change of the magnetic field connection directly correlates with the strength of this induced emf. A fundamental principle of electromagnetic that has to do with the production of electrical energy is known as Faraday's law.
A fluctuating magnetic field generates an electric field, according to Faraday's Law. comprehension electromagnetic induction, in which a shifting magnetic field induces an electromotive force (EMF) in a conductor and subsequently produces an electric current, requires a comprehension of this principle.
For more such questions on Faraday's law
https://brainly.com/question/17012638
#SPJ11
people who sell plants are not part of the field of horticulture true or false
Answer:
I think the answer is False
Explanation: If you look at the meaning of Horticulture
"the art or practice of garden cultivation and management".
They manage plants but can sell them afterward.
it is better to send 10,000 kw of electric power long distances at 10,000 v rather than at 220 v because:
It is better to send 10,000 kW of electric power longdistances at 10,000 V rather than at 220 V because the insulation is more effective at high voltages more current is transmitted at high voltages.
Insulation is a material that is used to reduce the transfer of heat, sound, or electricity between two objects or spaces. In buildings, insulation is used to keep the indoor temperature stable by preventing heat from escaping during cold weather and from entering during hot weather. Insulation can be made from a variety of materials, such as fiberglass, cellulose, foam, and mineral wool.
Insulation works by trapping air in small pockets, which reduces the amount of heat that can pass through the material. The effectiveness of insulation is measured by its thermal resistance, or R-value, which indicates how well it can resist the flow of heat. In addition to its thermal properties, insulation can also provide soundproofing and electrical insulation.
To learn more about Insulation visit here:
brainly.com/question/30891246
#SPJ4
assume that an intercontinental ballistic missile goes from rest to a suborbital speed of 6.50 km/s in 60.0 s (the actual speed and time are classified). what is its average acceleration in m/s2 ?
The average acceleration of the intercontinental ballistic missile is approximately 108.33 m/s².
The student question is asking for the average acceleration of an intercontinental ballistic missile that goes from rest to a suborbital speed of 6.50 km/s in 60.0 s.
To calculate the average acceleration, we can use the formula:
Acceleration (a) = (Final Velocity (v) - Initial Velocity (u)) / Time (t)
Given the information, the missile starts from rest, so the initial velocity (u) is 0. The final velocity (v) is given as 6.50 km/s, and the time (t) is given as 60.0 s. We need to convert the final velocity from km/s to m/s for consistency.
1 km = 1,000 m
So, 6.50 km/s = 6,500 m/s
Now, we can plug the values into the formula:
a = (6,500 m/s - 0 m/s) / 60.0 s
a = 6,500 m/s / 60.0 s
a ≈ 108.33 m/s²
To learn more about : intercontinental
https://brainly.com/question/23822725
#SPJ11
you see a fish below the surface of a body of water. the fish is located 1.5 m below the water surface. your line of sight to the image of the fish has an angle of incidence of 40o from normal to the surface of the water. determine the actual location of the fish from the point on the surface that appears to be in line with the image of the fish. present your results graphically and numerically. 2. a student actor is wearing a purple costume on the theatrical stage. what color will the costume appear if a green light illuminates the student? 3. in designing a fiber optic to carry a 632 nm laser beam over a distance, at what minimum angle must the laser beam enter the glass (nglass
We may utilize the physics of refraction to establish the true position of the fish from the point on the surface that seems to be in line with the picture of the fish. The light beams from the fish are refracted at the water.
air contact and appear to emanate from a place above the fish's true position. We can compute the true depth of the fish using trigonometry to be roughly 1.13 meters. When a green light shines on a purple outfit, the costume turns black. This is due to the fact that purple is a mixture of red and blue light, but green light does not include any of these hues. As a result, when green light is shone on a purple item,water no color is produced. The item seems black because it corresponds to the green wavelength. The angle of incidence of the laser beam entering the glass should be larger than or equal to the critical angle of the glass to reduce losses in a fiber optic. The critical angle for a 632 nm laser beam in glass with a refractive index of 1.5 may be computed using Snell's law to be around 41.8 degrees. To eliminate reflection losses, the laser beam must enter the glass at an angle of 41.8 degrees or more.
learn more about water here:
https://brainly.com/question/28465561
#SPJ4
what is the rms-current irms in the circuit when vrms = 30.0 v, c = 1.8 µf, and f = 4.0 khz?
The rms current in the circuit is 1.36 A when vrms is 30v , c = 1.8 µf, and f= 4.0khz.
To determine the rms current (Irms) in a circuit with a known rms voltage (Vrms), capacitance (C), and frequency (f), we can use the formula:
Irms = Vrms / (XC)
where XC is the capacitive reactance of the circuit, given by:
XC = 1 / (2πfC)
where π is the mathematical constant pi (approximately 3.14).
Substituting the given values into these equations, we
get:
XC = 1 / (2πfC) = 1 / (2 x 3.14 x 4000 x 1.8 x 10^-6) = 22.09 ohms
Irms = Vrms / (XC) = 30.0 V / 22.09 ohms = 1.36 A (rounded to two significant figures)
learn more about rms current here:
https://brainly.com/question/30097489
#SPJ11
a proton is propelled at 4 10 m/s perpendicular to a uniform magnetic field. 1) if it experiences a magnetic force of 2.8 10 n, what is the strength of the magnetic field? (express your answer using two significant figures.)
The strength of the magnetic field is 1.0 × 10⁻⁷ T.
A proton is propelled at 4.10 m/s perpendicular to a uniform magnetic field. If it experiences a magnetic force of 2.8 10 N, what is the strength of the magnetic field? (Express your answer using two significant figures.)The formula for magnetic force is given by:F = qvBsinθwhere:F is the magnetic force on a charged particle,q is the charge of the particle,v is the velocity of the particle,B is the magnetic field strength, andθ is the angle between the magnetic field and the velocity vector of the charged particle.Rearranging the formula to isolate the magnetic field strength, we get:B = F / qv sinθSubstituting the given values, we get:B = (2.8 × 10⁻¹⁰ N) / (1.6 × 10⁻¹⁹ C)(4.1 m/s) sin 90°B = 1.0 × 10⁻⁷ T (to two significant figures.
Learn more about magnetic field here:
https://brainly.com/question/29269991
#SPJ4
if the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, what is the mass, in kilograms, of the barbell?
The mass of the barbell is 10.965 kg if the clown retracts with a speed of 0.485 m/s and the barbell is hurled with a speed of 8.5 m/s.
If the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, the mass, in kilograms, of the barbell can be calculated as follows:mv = -mv′
Using the law of conservation of momentum,m1v1 + m2v2 = m1v'1 + m2v'2
Given that the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, we can equate the momenta to get: (0.2 kg) (0.485 m/s) + (m2) (8.5 m/s) = 0.485 m/s(m2 + 0.2 kg)On simplification, the mass of the barbell, m2 = 10.965 kg.
Learn more about speed here:
https://brainly.com/question/17661499
#SPJ11
who will catch the ball on the merry-go-round spinning counter-clockwise? a. ball caught by the thrower b. ball caught opposite the thrower c. ball caught to the thrower's left d. ball caught to the thrower's right
The ball will be caught by the thrower's right. The correct answer is option d.
When the merry-go-round is spinning counterclockwise, the person throwing the ball and the ball itself will have a tangential velocity in the counterclockwise direction. As the ball leaves the thrower's hand, it will continue to move in a straight line with this tangential velocity.
However, the ball is also subject to the circular motion of the merry-go-round, which means it will also have a centripetal acceleration towards the center of the merry-go-round.
As a result, the ball will follow a curved path towards the right of the thrower and will be caught by the thrower's right hand.
So, the correct answer is d. the ball caught to the thrower's right.
To know more about tangential velocity click here:
https://brainly.com/question/28738284
#SPJ11
n problem 5, what is the speed of the flake when it reaches the bottom of the bowl? (b) if we substituted a second flake with twice the mass, what would its speed be? (c) if, instead, we gave the flake an initial downward speed along the bowl, would the answer to (a) increase, decrease, or remain the same?
In problem 5, the speed of the flake at the bottom of the bowl is (a) dependent on potential and kinetic energy, (b) same for a flake with twice the mass, and (c) increased due to initial downward speed.
To find the speed of the flake at the bottom of the bowl, we must consider the conservation of energy. Initially, the flake has potential energy (PE = mgh), which is converted into kinetic energy (KE = 1/2 mv^2) as it moves down the bowl.
Using the conservation of energy principle (PE_initial + KE_initial = PE_final + KE_final), we can solve for the final speed (v).
For part (b), the mass does not affect the final speed, as the potential energy is proportional to mass, and mass will cancel out when equating PE and KE.
For part (c), giving the flake an initial downward speed adds initial kinetic energy to the system. This will result in an increase in the final speed, as the flake has more energy to convert to kinetic energy as it reaches the bottom.
To know more about conservation of energy click on below link:
https://brainly.com/question/2137260#
#SPJ11