The drift velocity of charges in the wire and the current of the toaster cannot be determined with the given information as specific values for length, resistance, and voltage are missing. So none is relative.
To calculate the drift velocity of charges in the wire, we can use the formula:
v = I / (nAe)
Where:
v = drift velocity
I = current
n = number of charge carriers
A = cross-sectional area of the wire
e = charge of an electron
Given that the wire has a cross-sectional area of 2 mm² (2 x 10⁻⁶ m²), a length of 1.3 cm (0.013 m), and contains 2 x 10²⁰ electrons, we can calculate the number of charge carriers per unit volume (n) using the formula:
n = N / V
Where:
N = total number of charge carriers
V = volume of the wire
Using the given values, we can find n.
Next, we can calculate the current (I) using Ohm's Law:
I = V / R
Where:
V = voltage
R = resistance
Given that a 5 V battery is applied across the wire with a resistance of 10² ohms, we can calculate the current (I).
Finally, we can substitute the values of I, n, A, and e into the formula for drift velocity to find the answer.
Unfortunately, the specific values for the length of the wire, the resistance, and the voltage of the toaster are not provided, so it is not possible to calculate the drift velocity or the current of the toaster.
To know more about Ohm's Law,
https://brainly.com/question/1247379
#SPJ11
Light from a burning match propagates from left to right, first through a thin lens of focal length 5.7 cm, and then through another thin lens, with a 9.9-cm focal length. The lenses are fixed 30.5 cm apart. A real image of the flame is formed by the second lens at a distance of 23.2 cm from the lens.
How far from the second lens, in centimeters, is its optical object located?
How far is the burning match from the first lens, in centimeters?
a) The optical object is located approximately 17.26 cm from the second lens.
b) The burning match is located approximately 7.57 cm from the first lens.
To find the distance of the optical object from the second lens, we can use the lens formula:
1/f = 1/v - 1/u
where f is the focal length of the lens, v is the image distance, and u is the object distance.
Let's denote the distance of the optical object from the second lens as u2. We know that the focal length of the second lens is 9.9 cm and the image distance is 23.2 cm. Plugging these values into the lens formula:
1/9.9 cm = 1/23.2 cm - 1/u2
Simplifying the equation:
1/u2 = 1/23.2 cm - 1/9.9 cm
1/u2 = (9.9 cm - 23.2 cm)/(23.2 cm * 9.9 cm)
1/u2 = -13.3 cm / (229.68 cm^2)
u2 = - (229.68 cm^2) / 13.3 cm
u2 = -17.26 cm
The negative sign indicates that the object is located on the same side as the image.
To find the distance of the burning match from the first lens, we can use the lens formula again, this time for the first lens.
Let's denote the distance of the burning match from the first lens as u1. We know that the focal length of the first lens is 5.7 cm. Plugging this value and the distance between the lenses (30.5 cm) into the lens formula:
1/5.7 cm = 1/23.2 cm - 1/u1
Simplifying the equation:
1/u1 = 1/23.2 cm - 1/5.7 cm
1/u1 = (5.7 cm - 23.2 cm)/(23.2 cm * 5.7 cm)
1/u1 = -17.5 cm / (132.64 cm^2)
u1 = - (132.64 cm^2) / 17.5 cm
u1 = -7.57 cm
Again, the negative sign indicates that the object is located on the same side as the image.
To know more about lens formula
https://brainly.com/question/30241648
#SPJ11
When you run from one room to another, you're moving through:
A. Space
B. Time
C. Both
D. Cannot tell with the information given.
I think number c is the answer of this question
During a certain time interval, the angular position of a swinging door is described by 0 = 5.08 + 10.7t + 1.98t2, where 0 is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door at the following times.
The angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
The given equation describes the angular the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².position of a swinging door:0 = 5.08 + 10.7t + 1.98t²The angular position (θ) can be determined asθ = 5.08 + 10.7t + 1.98t²Let's calculate the angular position of the door at t = 0.8 s;θ = 5.08 + 10.7(0.8) + 1.98(0.8)²θ = 11.496 rad (rounded to three significant figures)The angular position of the door at t = 0.8 s is 11.5 rad.The angular speed (ω) is the time derivative of the angular position (θ) with respect to time (t).ω = dθ/dt = 10.7 + 3.96t
Let's calculate the angular speed of the door at t = 0.8 s;ω = 10.7 + 3.96(0.8)ω = 13.502 rad/s (rounded to three significant figures)The angular speed of the door at t = 0.8 s is 13.5 rad/s.The angular acceleration (α) is the time derivative of the angular speed (ω) with respect to time (t).α = dω/dt = 3.96Let's calculate the angular acceleration of the door at t = 0.8 s;α = 3.96 rad/s²The angular acceleration of the door at t = 0.8 s is 3.96 rad/s². Hence, the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
A boy sitting in a tree launches a rock with a mass 75 g straight up using a slingshot. The initial speed of the rock is 8.0 m/s and the boy, is 4.0 meters above the ground. The rock rises to a maximum height, and then falls to the ground. USE ENERGY CONSERVATIONTO SOLVE ALL OF THIS PROBLEM (20pts) a) Model the slingshot as acting. like a spring. If, during the launch, the boy pulls the slingshot back 0.8 m from its unstressed position, what must the spring constant of the slingshot be to achieve the 8.0 m/s launch speed? b) How high does the rock rise above the ground at its highest point? c) How fast is the rock moving when it reaches the ground? (assuming no air friction) If, due to air friction, the rock falls from the height calculated in Part b and actually strikes the ground with a velocity of 10 m/s, what is the magnitude of the (nonconservative) force due to air friction?
a) spring constant is approximately 3.7 N/m. b) height is approximately 1.1 m. c) The magnitude of the (nonconservative) force due to air friction when the rock hits the ground is approximately 0.32 N.
a)Model the slingshot as acting like a spring. If during the launch, the boy pulls the slingshot back 0.8 m from its unstressed position, the spring constant of the slingshot required to achieve the 8.0 m/s launch speed can be calculated as follows:Given: mass of the rock = 75 g = 0.075 kgInitial velocity of the rock = 8.0 m/s
Distance the boy pulls back the slingshot = 0.8 mThe net force acting on the rock as it moves from the unstressed position to its maximum displacement can be determined using Hooke's law:F = -kxHere,x = 0.8 mis the displacement of the spring from the unstressed position, andF = ma, wherea = acceleration = Δv/Δt
We know that the time for which the rock stays in contact with the slingshot is the time it takes for the spring to go from maximum compression to maximum extension, so it can be written as:Δt = 2t
Since the final velocity of the rock is 0, the displacement of the rock from maximum compression to maximum extension equals the maximum height the rock reaches above the ground. Using the principle of energy conservation, we can calculate this maximum height.
b)The maximum height the rock reaches above the ground can be calculated as follows:At the highest point, the velocity of the rock is 0, so we can use the principle of conservation of energy to calculate the maximum height of the rock above the ground.
c)The final velocity of the rock when it hits the ground can be calculated using the equation:[tex]vf^2 = vi^2 + 2ad[/tex]
wherevf = final velocity of the rock = 10 m/svi = initial velocity of the rock = -4.91 m/sd = displacement of the rock = 6.13 m
a) The spring constant of the slingshot required to achieve the 8.0 m/s launch speed is approximately 3.7 N/m.
b) The maximum height the rock reaches above the ground is approximately 1.1 m.
c) The magnitude of the (nonconservative) force due to air friction when the rock hits the ground is approximately 0.32 N.
Learn more about friction here:
https://brainly.com/question/28356847
#SPJ11
A 6.05-m radius air balloon loaded with passengers and ballast is floating at a fixed altitude. Determine how much weight (ballast) must be dropped overboard to make the balloon rise 116 m in 23.5 s. Assume a constant value of 1.2 kg/m3 for the density of air. Ballast is weight of negligible volume that can be dropped overboard to make the balloon rise.
The calculation of the weight that needs to be dropped is based on the density of air, the radius of the balloon, and the time and distance of the ascent. To make the balloon rise 116 m in 23.5 s, approximately 546 kg of weight (ballast) needs to be dropped overboard.
To determine the amount of weight (ballast) that needs to be dropped overboard, we can use the principle of buoyancy. The buoyant force acting on the balloon is equal to the weight of the air displaced by the balloon.
First, we need to calculate the initial weight of the air displaced by the balloon. The volume of the balloon can be calculated using the formula [tex]V = (4/3)\pi r^3[/tex] , where V represents volume and r represents the radius of the balloon. Substituting the given radius of 6.05 m, we have [tex]V = (4/3)\pi (6.05 )^3[/tex] ≈ 579.2 [tex]m^3[/tex]
The weight of the air displaced can be calculated using the formula W = Vρg, where W represents weight, V represents volume, ρ represents the density of air, and g represents the acceleration due to gravity. Substituting the given density of air ([tex]1.2\ kg/m^3[/tex]) and the acceleration due to gravity (9.8 m/s^2), we have W = ([tex]579.2 \times 1.2 \times 9.8[/tex]) ≈ 6782.2 N.
To make the balloon rise, the buoyant force needs to exceed the initial weight of the balloon. The change in weight required can be calculated using the formula ΔW = mΔg, where ΔW represents the change in weight, m represents the mass, and Δg represents the change in acceleration due to gravity. Since the balloon is already floating at a fixed altitude, the change in acceleration due to gravity is negligible.
Assuming the acceleration due to gravity remains constant, the change in weight is equal to the weight of the ballast to be dropped. Therefore, we have ΔW ≈ 6782.2 N.
To convert the change in weight to mass, we can use the formula W = mg, where m represents mass. Rearranging the equation to solve for m, we have m = W/g. Substituting the change in weight, we have m ≈ [tex]\frac{6782.2}{ 9.8}[/tex] ≈ 693.1 kg. Therefore, approximately 693.1 kg (or 546 kg rounded to the nearest whole number) of weight (ballast) must be dropped overboard to make the balloon rise 116 m in 23.5 s.
Learn more about buoyant force here:
https://brainly.com/question/11884584
#SPJ11
Three bodies of masses m 1
=6 kg and m 2
=m 3
=12 kg are connected as shown in the figure and pulled toward right on a frictionless surface. If the magnitude of the tension T 3
is 60 N, what is the magnitude of tension T 2
( in N) ?
The magnitude of tension T2 is 18 N.
In the given figure, three bodies of masses m1=6 kg and m2=m3=12 kg are connected. And, they are pulled towards right on a frictionless surface. If the magnitude of tension T3 is 60 N, then we need to determine the magnitude of tension T2.Let's consider the acceleration of the system, which is common to all three masses. So, for m1,m2, and m3, we have equations as follows:6a = T2 - T112a = T3 - T216a = T2 + T3By solving above equations, we get T2 = 18 N. Hence, the magnitude of tension T2 is 18 N.
To know more about horizontal visit:
https://brainly.com/question/31166587
#SPJ11
A 230 000 V-rms power line carries an average power PAV = 25 MW over a distance of 100 km. If the total resistance of the wires is 10 ohms, what is the resistive power loss?
A.
12 kW
B.
2.5 MW
C.
1.0 MW
D.
12 MW
E.
3.4 MW
The correct option is B. The resistive power loss in the power line is 2.5 MW. The resistive power loss in a power line is calculated using the formula [tex]P_l{oss} = I^2 * R[/tex].
The resistive power formula is [tex]P_l{oss} = I^2 * R[/tex], where[tex]P_{loss}[/tex] is the power loss, I is the current flowing through the wires, and R is the resistance. For determining the current, the formula used is:
[tex]PAV = I^2 * R[/tex],
where PAV is the average power and solves for I.
Rearranging the formula,
[tex]I = \sqrt(PAV / R).[/tex]
Substituting the given values, [tex]I = \sqrt(25 MW / 10 ohms) = \sqrt(2.5 MW) = 1.58 kA[/tex] (kiloamperes).
Now, calculate the resistive power loss by substituting the values into the formula:
[tex]P_{loss} = I^2 * R. P_{loss} = (1.58 kA)^2 * 10 ohms = 2.5 MW[/tex].
Therefore, the resistive power loss in the power line is 2.5 MW.
Hence, the correct option is B.
Learn more about current here:
https://brainly.com/question/2285102
#SPJ11
Mr. P has a mass of 62 kg. He steps off a 66.3 cm high wall and drops to the ground below. If he bends his knees as he lands so that the time during which he stops his downward motion is 0.23 s, what is the average force (in N) that the ground exerts on Mr. P?
Round your final answer to the nearest integer value. If there is no solution or if the solution cannot be found with the information provided, give your answer as: -1000
The average force that the ground exerts on Mr. P is 607 N (rounded to the nearest integer).Hence, the required answer is 607 N.
In order to calculate the average force that the ground exerts on Mr. P, we will use the formula:F = (m × g) + (m × (v f − v i) / Δt)Here, m = 62 kg, g = 9.8 m/s² (acceleration due to gravity), v i = 0 m/s (initial velocity), v f = 0 m/s (final velocity), Δt = 0.23 s, and the distance fallen is h = 66.3 cm = 0.663 m. We can first calculate the velocity with which Mr. P hits the ground:vf = √(2gh)where, h is the height from where the object is dropped.
Therefore, vf = √(2 × 9.8 × 0.663) = 3.191 m/s.Now, we can substitute the given values into the formula for force:F = (m × g) + (m × (v f − v i) / Δt)F = (62 × 9.8) + (62 × (0 − 0) / 0.23)F = 607.6 NTherefore, the average force that the ground exerts on Mr. P is 607 N (rounded to the nearest integer).Hence, the required answer is 607 N.
Learn more about average force here,
https://brainly.com/question/18652903
#SPJ11
A dentist's drill starts from rest. After 2.70 s of constant angular acceleration, it turns at a rate of 2.51×10 4
rev/min. (a) Find the drill's angular acceleration. rad/s 2
(along the axis of rotation) (b) Determine the angle through which the drill rotates during this period. rad
(a) Angular acceleration is 972.9 [tex]rad/s^2[/tex] (b) angle through which the drill rotates during this period is 3520.8 rad.
The rate at which the angular velocity of an item changes over time is determined by its angular acceleration. It measures the rate of change in rotational speed or direction of an object. The difference between the change in angular velocity and the change in time is known as angular acceleration.
It is measured in radians per square second (rad/s2) units. An increase in angular velocity is indicated by positive angular acceleration, whereas a decrease is indicated by negative angular acceleration. It is affected by things like the torque that is given to an object, that object's moment of inertia, and any outside forces that are acting on it. Understanding rotational motion and the behaviour of rotating objects requires an understanding of angular acceleration, a fundamental term in rotational dynamics.
(a) The formula for the angular acceleration is given by the following:α = ωf - ωi/t
The given values are,ωi = 0 (The drill starts from rest)ωf = 2.51×104 rev/min = (2.51×104 rev/min)*([tex]2\pi[/tex] rad/1 rev)*(1 min/60 s) = 2628.9 rad/st = 2.70 sα = ?
Therefore,α = (2628.9 rad/s - 0 rad/s)/(2.70 s)α = 972.9 rad/[tex]s^2[/tex]
Therefore, the angular acceleration of the drill is 972.9 rad/[tex]s^2[/tex].
(b) The formula for the angular displacement is given by the following:θ = ωi*t + (1/2)α[tex]t^2[/tex]
The given values are,ωi = 0 (The drill starts from rest)t = 2.70 sα = 972.9 rad/[tex]s^2[/tex]
Therefore,θ = 0*(2.70 s) + [tex](1/2)*(972.9 rad/s²)*(2.70 s)²θ[/tex] = 3520.8 rad
Therefore, the angle through which the drill rotates during this period is 3520.8 rad.
Learn more about angular acceleration here:
https://brainly.com/question/30237820
#SPJ11
according to : y =\lambdaD/d
the approximate width of the central bright fringe
from a single slit diffraction
1. will increase with increasing wave length
2. will increase will increasing slit width
3. both of the above
4. does not depend on wave length or slit width
According to the equation y = λD/d, the approximate width of the central bright fringe from a single slit diffraction will depend on both the wavelength of light used and the width of the slit itself.
Therefore, the correct option is option c. This means that the width of the central bright fringe will increase with increasing wavelength, as well as with increasing slit width.
The equation y = λD/d is used to calculate the position of the nth bright fringe in a single slit diffraction pattern, where y is the distance from the center of the pattern to the fringe, λ is the wavelength of light used, D is the distance between the slit and the screen, and d is the width of the slit.
As per the equation, the width of the central bright fringe (n = 0) is given by the formula y0 = λD/d. Therefore, it can be inferred that the width of the central bright fringe will increase as the wavelength of light used increases, as well as with an increase in the width of the slit.
To know more about slits visit:
https://brainly.com/question/31551061
#SPJ11
Fifteen identical particles have various speeds. One has a speed of 4.00 m/s, two have a speed of 5.00 m/s, three have a speed of 7.00 m/s, four have a speed of 5.00 m/s, three have a speed of 10.0 m/s and two have a speed of 14.0 m/s. Find (a) the average speed, (b) the rms speed, and (c) the most probable speed of these particles. (a) 7.50 m/s; (b) 8.28 m/s; (c) 14.0 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 5.00 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 14.0 m/s (a) 7.50 m/s; (b) 8.28 m/s; (c) 5.00 m/s If vector B
is added to vector A
, the result is 6i+j. If B
is subtracted from A
, the result is −ii+7j. What is the magnitude of A
? 5.4 5.8 5.1 4.1 8.2
The answers to the given questions are:
(a) Average speed: 7.50 m/s
(b) RMS speed: 8.28 m/s
(c) Most probable speed: 5.00 m/s
To find the average speed, we sum up all the speeds and divide by the total number of particles. Calculating the average speed gives us (1 * 4 + 2 * 5 + 3 * 7 + 4 * 5 + 3 * 10 + 2 * 14) / 15 = 7.50 m/s.
The root mean square (RMS) speed is calculated by taking the square root of the average of the squares of the speeds. We square each speed, calculate the average, and then take the square root. This gives us the RMS speed as sqrt[(1 * 4^2 + 2 * 5^2 + 3 * 7^2 + 4 * 5^2 + 3 * 10^2 + 2 * 14^2) / 15] ≈ 8.28 m/s.
The most probable speed corresponds to the peak of the speed distribution. In this case, the speed of 5.00 m/s occurs the most frequently, with a total of 2 + 4 = 6 particles having this speed. Therefore, the most probable speed is 5.00 m/s.
Regarding the second question, we have two equations: A + B = 6i + j and A - B = -i + 7j.
By solving these equations simultaneously, we can find the values of A and B.
Adding the two equations, we get 2A = 5i + 8j, which means A = (5/2)i + 4j.
The magnitude of A is given by the formula sqrt[(5/2)^2 + 4^2] ≈ 5.8. Therefore, the magnitude of A is approximately 5.8.
Learn more about RMS speed and RMS speed:
https://brainly.com/question/12896215
#SPJ11
A daredevil is shot out of a cannon at 32.0° to the horizontal with an initial speed of 26.8 m/s. A net is positioned at a horizontal dis- tance of 37.7 m from the cannon from which the daredevil is shot. The acceleration of gravity is 9.81 m/s². At what height above the cannon's mouth should the net be placed in order to catch the daredevil? Answer in units of m. m Answer in units of m
The height above the cannon's mouth where the net should be placed is approximately 47693.6232 meters.
To find the height above the cannon's mouth where the net should be placed, we need to analyze the vertical motion of the daredevil.
We can use the equations of motion to solve for the desired height.
Given:
Initial velocity (vi) = 26.8 m/s
Launch angle (θ) = 32.0°
Horizontal distance (d) = 37.7 m
Acceleration due to gravity (g) = 9.81 m/s²
First, we need to determine the time it takes for the daredevil to reach the horizontal distance of 37.7 m.
We can use the horizontal component of the velocity (vix) and the horizontal distance traveled (d) to calculate the time (t):
d = vix * t
Since the horizontal velocity is constant and equal to the initial velocity multiplied by the cosine of the launch angle (θ), we have:
vix = vi * cos(θ)
Substituting the given values:
d = (26.8 m/s) * cos(32.0°) * t
Solving for t:
t = d / (vi * cos(θ))
Next, we can determine the height (h) above the cannon's mouth where the net should be placed. We'll use the vertical motion equation:
h = viy * t + (1/2) * g * t²
where viy is the vertical component of the initial velocity (viy = vi * sin(θ)).
Substituting the given values:
h = (26.8 m/s) * sin(32.0°) * t + (1/2) * (9.81 m/s²) * t²
Now we can substitute the value of t we found earlier:
h = (26.8 m/s) * sin(32.0°) * (d / (vi * cos(θ))) + (1/2) * (9.81 m/s²) * (d / (vi * cos(θ)))²
To simplify the expression for the height above the cannon's mouth, we can substitute the given values and simplify the equation.
First, let's calculate the values for the trigonometric functions:
sin(32.0°) ≈ 0.5299
cos(32.0°) ≈ 0.8480
Substituting these values into the equation:
h = (26.8 m/s) * (0.5299) * (37.7 m) / (26.8 m/s * 0.8480) + (1/2) * (9.81 m/s²) * (37.7 m / (26.8 m/s * 0.8480))²
Simplifying further:
h = 0.5299 * 37.7 m + (1/2) * (9.81 m/s²) * (37.7 m / 0.8480)²
h = 19.98 m + (1/2) * (9.81 m/s²) * (44.46 m)²
h = 19.98 m + 4.905 m/s² * 44.46 m²
h = 19.98 m + 4.905 m/s² * 1980.0516 m²
h ≈ 19.98 m + 4.905 * 9737.5197 m
h ≈ 19.98 m + 47673.6432 m
h ≈ 47693.6232 m
Therefore, the height above the cannon's mouth where the net should be placed is approximately 47693.6232 meters.
Learn more about equations of motion here:
https://brainly.com/question/29278163
#SPJ11
A cat, a mouse and a dog are in a race. The mouse is currently leading, running at a constant 5 m/s. The cat is lagging slightly behind, running at a constant 2.25 m/s. The dog is the farthest behind, running at 2.0 m/s.
What is the velocity (magnitude and direction) of the dog relative to the cat?
What is the velocity (magnitude and direction) of the mouse relative to the dog?
A boat that is able to travel at 5 m/s relative to water needs to go across a 10 m wide river that flows to the left at 2 m/s.
If the boat leaves the river bank perpendicular to the flow of the river,
what is its velocity relative to the shore?
how much distance downstream would the boat hit the other bank?
iii. how much time does it take to get to the other bank?
B. If the boat wants to get to a point directly across the river on the other side,
at what angle upstream should it travel?
how much time does it take to get to the other bank?
A. The velocity (magnitude and direction) of the dog relative to the cat is 0.25 m/s in the direction of the cat. The velocity is obtained by subtracting the velocity of the cat from the velocity of the dog which gives the velocity of the dog relative to the cat:velocity of dog relative to cat = velocity of dog - velocity of catvelocity of dog relative to cat = 2.0 m/s - 2.25 m/svelocity of dog relative to cat = -0.25 m/s The negative sign indicates that the dog is behind the cat in the direction of the cat.
B. The velocity (magnitude and direction) of the mouse relative to the dog is 3 m/s in the direction of the mouse. The velocity is obtained by subtracting the velocity of the dog from the velocity of the mouse which gives the velocity of the mouse relative to the dog:velocity of mouse relative to dog = velocity of mouse - velocity of dogvelocity of mouse relative to dog = 5 m/s - 2.0 m/svelocity of mouse relative to dog = 3 m/s The positive sign indicates that the mouse is in front of the dog in the direction of the mouse.
C. The velocity (magnitude and direction) of the boat relative to the shore is 3 m/s perpendicular to the flow of the river. The velocity of the boat relative to the water is 5 m/s and the velocity of the river is 2 m/s to the left. The velocity of the boat relative to the shore is given by:velocity of boat relative to shore = velocity of boat relative to water + velocity of rivervelocity of boat relative to shore = 5 m/s + 2 m/svelocity of boat relative to shore = 3 m/s
D. The boat hits the other bank 8.16 meters downstream. The time to cross the river is 2 seconds. The distance downstream can be obtained by multiplying the time by the velocity of the river which gives the distance the boat drifts downstream:distance downstream = time x velocity of riverdistance downstream = 2 s x 2 m/sdistance downstream = 4 meters The distance perpendicular to the flow of the river can be obtained by using Pythagoras' theorem:distance perpendicular = √(102 + 42)distance perpendicular = √116distance perpendicular = 10.77 meters
The total distance the boat travels can be obtained by adding the distance downstream to the distance perpendicular:total distance = distance downstream + distance perpendiculartotal distance = 4 m + 10.77 mtotal distance = 14.77 meters E. The boat should travel at an angle of 23.2 degrees upstream. The velocity of the boat relative to the water is 5 m/s and the velocity of the river is 2 m/s to the left.
The velocity of the boat relative to the shore is perpendicular to the flow of the river and it is the hypotenuse of a right triangle. The angle that the velocity of the boat relative to the shore makes with the velocity of the boat relative to the water can be obtained by using trigonometry:tan θ = velocity of river / velocity of boat relative to watertan θ = 2 m/s / 5 m/stan θ = 0.4θ = 23.2 degrees The time to cross the river is 2.31 seconds.
The distance the boat drifts downstream is obtained by multiplying the time by the velocity of the river which gives the distance the boat drifts downstream:distance downstream = time x velocity of riverdistance downstream = 2.31 s x 2 m/sdistance downstream = 4.62 meters The distance perpendicular to the flow of the river can be obtained by using trigonometry:cos θ = velocity of shore / velocity of boat relative to watervelocity of shore = cos θ x velocity of boat relative to watervelocity of shore = cos 23.2 degrees x 5 m/svelocity of shore = 4.53 m/s
The distance perpendicular to the flow of the river can be obtained by dividing the width of the river by the cosine of the angle:distance perpendicular = width of river / cos θdistance perpendicular = 10 m / cos 23.2 degreesdistance perpendicular = 10.87 meters The total distance the boat travels can be obtained by adding the distance downstream to the distance perpendicular:total distance = distance downstream + distance perpendiculartotal distance = 4.62 m + 10.87 mtotal distance = 15.49 meters The time to cross the river is obtained by dividing the total distance by the velocity of the boat relative to the water:time to cross the river = total distance / velocity of boat relative to watertime to cross the river = 15.49 m / 5 m/stime to cross the river = 2.31 seconds.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
A 1.2 kg ball of clay is thrown horizontally with a speed of 2 m/s, hits a wall and sticks to it. The amount of energy stored as thermal energy is
Answer:
the amount of energy stored as thermal energy is 2.4 Joules.
Explanation:
The amount of energy stored as thermal energy can be calculated by considering the initial kinetic energy of the ball and the final thermal energy after the collision.
The initial kinetic energy of the ball can be calculated using the formula:
Kinetic energy = (1/2) * mass * velocity^2
Plugging in the values:
Kinetic energy = (1/2) * 1.2 kg * (2 m/s)^2
= 2.4 J
For each statement, select True or False
a) Total internal reflection of light can happen when light travels between any 2 mediums as long as the correct angle is used for the incident light.
b) The index of refraction of a medium depends on the wavelength of incident light.
c) We can see the color of a purple flower because the flower absorbs all colors except the purple
d) According to the Second Postulate of Relativity, if a source of light is travelling at a speed v, then thelight wave will travel at speed cry for an observer at rest respect to the source
e) Simultaneity is absolute. 2 events that happen at the same time in a reference frame will also be simultaneous in any other reference frame as long as it is inertial.
f) According to the theory of Relativistic Energy, an object with mass M, at rest, and with zero potential energy, has a zero total energy.
g) If a train travels at a speed close to the speed of light, an observer at rest on the platform will see a contraction of the train in both the vertical and horizontal directions.
h) Optical fibers can guide the light because of the total internal reflection of light.
i) If you are at rest on a platform, measuring the time it takes for a train to pass in front of you, you are measuring the proper time
j) The lifetime of a particle measured in a lab will always be larger than the lifetime in the particle's reference system
a) Trueb) Falsec) True d) Fale) Falsef) Falseg) Falseh) Truei) Truej) False.
a) The statement "Total internal reflection of light can happen when light travels between any 2 mediums as long as the correct angle is used for the incident light" is True.b) The statement "The index of refraction of a medium depends on the wavelength of incident light" is False.c) The statement "We can see the color of a purple flower because the flower absorbs all colors except the purple" is True.
d) The statement "According to the Second Postulate of Relativity, if a source of light is travelling at a speed v, then the light wave will travel at speed cry for an observer at rest respect to the source" is False.e) The statement "Simultaneity is absolute. 2 events that happen at the same time in a reference frame will also be simultaneous in any other reference frame as long as it is inertial" is False.
f) The statement "According to the theory of Relativistic Energy, an object with mass M, at rest, and with zero potential energy, has a zero total energy" is False.g) The statement "If a train travels at a speed close to the speed of light, an observer at rest on the platform will see a contraction of the train in both the vertical and horizontal directions" is False.h) The statement "Optical fibers can guide the light because of the total internal reflection of light" is True.
i) The statement "If you are at rest on a platform, measuring the time it takes for a train to pass in front of you, you are measuring the proper time" is True.j) The statement "The lifetime of a particle measured in a lab will always be larger than the lifetime in the particle's reference system" is False.
Learn more about energy here,
https://brainly.com/question/2003548
#SPJ11
The circuit shown below includes a battery of EMF = 5.424 V, a resistor with R = 0.5621 ΩΩ , and an inductor with L = 5.841 H. If the switch S has been in position a for a very long time and is then flipped to position b, what is the current in the inductor at t = 2.318 s ?
The current in the inductor at t = 2.318 s after the switch is flipped to position b is approximately 52.758 amperes (A).
To determine the current in the inductor at t = 2.318 s after the switch is flipped to position b, we can use the formula for the current in an RL circuit with a battery:
I(t) = (ε/R) * (1 - e^(-Rt/L))
Where:
I(t) is the current at time t,
ε is the EMF of the battery,
R is the resistance,
L is the inductance, and
e is the base of the natural logarithm.
Given that ε = 5.424 V, R = 0.5621 Ω, L = 5.841 H, and t = 2.318 s, we can substitute these values into the formula:
I(t) = (5.424 V / 0.5621 Ω) * (1 - e^(-0.5621 Ω * 2.318 s / 5.841 H))
Calculating the exponent:
e^(-0.5621 Ω * 2.318 s / 5.841 H) ≈ 0.501
Substituting the values into the equation:
I(t) ≈ (5.424 V / 0.5621 Ω) * (1 - 0.501)
I(t) ≈ 52.758 A
Therefore, the current in the inductor at t = 2.318 s after the switch is flipped to position b is approximately 52.758 amperes (A).
Learn more about current
https://brainly.com/question/31853499
#SPJ11
A car moving at 8.9 m/s crashes into a tree and stops in 0.25 s. Calculate the force the seat belt exerts on a passenger in the car to bring him to a halt. The mass of the passenger is 76 kg.
The seat belt exerts a force of 2,696 N on the passenger to bring them to a halt.
When the car collides with the tree, the passenger's body will continue moving at the same speed as the car until it is restrained by the seat belt.
At this point, the car's momentum is transferred to the passenger's body, resulting in a force being exerted on the passenger.
Since the passenger is restrained by the seat belt, an equal and opposite force is exerted by the seat belt on the passenger to bring them to a halt.
To calculate the force exerted by the seat belt on the passenger, we can use the formula:
Force (F) = mass (m) * acceleration (a)
Given that the mass of the passenger is 76 kg, and the car stops in 0.25 seconds, we can calculate the acceleration experienced by the passenger. The initial velocity of the car is 8.9 m/s, and the final velocity is 0 m/s. Using the formula:
The acceleration (a) can be calculated by dividing the change in velocity (final velocity - initial velocity) by the time (t).
Acceleration (a) = (0 - 8.9) m/s / 0.25 s
This gives us an acceleration of -35.6 m/s², with the negative sign indicating that the acceleration is in the opposite direction of the initial motion.
Substituting the values of mass and acceleration into the force formula:
Force (F) = 76 kg * (-35.6 m/s²)
This results in a force of -2,696 N. The negative sign indicates that the force is directed opposite to the passenger's initial motion.
Therefore, the seat belt exerts a force of 2,696 N on the passenger to bring them to a halt.
Learn more about force at: https://brainly.com/question/12785175
#SPJ11
Over a certain region of space, the electric potential function is V = 5x - 3x²y + 2y z². What is the electric field at the point P, which has coordinates (1,0,2). B. - 1+k A. 61-2k I
The electric field at point P is B. -1 + k. To find the electric field at a given point, we need to take the negative gradient of the electric potential function. The electric field vector is given by:
E = -∇V
Where ∇ is the del operator (gradient operator).
In this case, the electric potential function is V = 5x - 3x²y + 2y z².
To find ∇V, we need to take the partial derivatives of V with respect to each coordinate variable (x, y, and z).
∂V/∂x = 5 - 6xy
∂V/∂y = -3x² + 2z²
∂V/∂z = 4yz
Now, we can evaluate these partial derivatives at the point P(1, 0, 2):
∂V/∂x = 5 - 6(1)(0) = 5
∂V/∂y = -3(1)² + 2(2)² = -3 + 8 = 5
∂V/∂z = 4(0)(2) = 0
Therefore, the electric field vector at point P is:
E = -∇V = -(∂V/∂x)i - (∂V/∂y)j - (∂V/∂z)k = -5i - 5j - 0k = -5(i + j)
So, the magnitude of the electric field is |E| = 5√2 and the direction is in the (-i - j) direction.
Therefore, the electric field at point P is B. -1 + k.
To know more about The electric field
brainly.com/question/30544719
#SPJ11
What is the electric potential energy of the group of charges in (Figure 1)? Assume that q=−6.5nC Express your answer with the appropriate units.
Electric potential energy = 14.8 N•m = 14.8 JAnswer: 14.8 J.
The electric potential energy of the group of charges in (Figure 1) when q = −6.5 nC can be calculated using the formula:Electric potential energy = (k * q1 * q2) / rWhere k is Coulomb's constant, q1 and q2 are the magnitudes of the charges and r is the distance between the charges.Given,Five charges of +2.5 nC each are placed at the corners of a square with 7.8 cm sides. Assume that q=−6.5 nC,So, the total charge of the four corner charges will be q1 = 2.5 nC * 4 = 10 nC.
The electric potential energy due to the 4 corner charges and the center charge will beElectric potential energy = k * q1 * q2 * (2/r) + k * q1 * q2 * (2 * sqrt2 / r)where, k = 8.99 × 10^9 N*m^2/C^2 = Coulomb's constantq1 = 10 nC (total charge of the 4 corner charges)q2 = -6.5 nC (charge of the center charge)r = 7.8 cm = 0.078 mAfter substituting the values, we get;Electric potential energy = 14.8 N•m = 14.8 JAnswer: 14.8 J.
Learn more about potential energy here,
https://brainly.com/question/1455245
#SPJ11
Two identical waves each have an amplitude of 6 cm and interfere with one another. You observe that the resultant wave has an amplitude of 12 cm. Of the phase differences listed (in units of radian), which one(s) could possibly represent the phase difference between these two waves? I. 0 II. TU III. IV. V. REIN 2 2π 3πT 4
Two identical waves each have an amplitude of 6 cm and interfere with one another. Therefore, only phase difference 0 could possibly represent the phase difference between these two waves. Therefore, the correct option is I.
In a wave, the amplitude determines the wave's maximum height (above or below its rest position), whereas the phase determines the wave's location in its cycle at a particular moment in time.
Since the waves have an amplitude of 6 cm, the resulting wave has an amplitude of 12 cm. It means that the waves are constructive and in phase.
Constructive interference happens when waves with the same frequency and amplitude align.
The combined amplitude of the two waves is equal to the sum of their individual amplitudes when this happens.
The formula for the resultant wave's amplitude is 2A cos(ϕ/2), where A is the amplitude of the two waves, and ϕ is the phase difference.ϕ = 0 corresponds to in-phase waves.
ϕ = 2π corresponds to waves that are shifted by one complete wavelength.
ϕ = π corresponds to waves that are shifted by half a wavelength.ϕ = 3π corresponds to waves that are shifted by 1.5 wavelengths.
ϕ = 4 corresponds to waves that are shifted by two complete wavelengths.
ϕ = T corresponds to waves that are shifted by the time period of the wave.
Therefore, only phase difference 0 could possibly represent the phase difference between these two waves. Therefore, the correct option is I.
Learn more about amplitude here:
https://brainly.com/question/9525052
#SPJ11
A marble rolls off a horizontal tabletop that is 0.97 m high and hits the floor at a point that is a horizontal distance of 3.64 m from the edge of the table.
a) How much time, in seconds, was the marble in the air?
b) what is the speed of the marble as it rolled off the table?
c) what was the marble's speed just before hitting the floor?
a) The marble was in the air for approximately 0.64 seconds.
b) The speed of the marble as it rolled off the table was 4.81 m/s.
c) The marble's speed just before hitting the floor was 8.69 m/s.
a) To determine the time the marble was in the air, we can use the equation h = 0.5 * g * t^2, where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time. Rearranging the equation, we get t = sqrt(2h / g). Substituting the given values, t = sqrt(2 * 0.97 m / 9.8 m/s^2) ≈ 0.64 s.
b) The speed of the marble as it rolled off the table can be found using the equation v = sqrt(2gh), where v is the velocity, g is the acceleration due to gravity, and h is the height. Substituting the given values, v = sqrt(2 * 9.8 m/s^2 * 0.97 m) ≈ 4.81 m/s.
c) To calculate the marble's speed just before hitting the floor, we can use the equation v = sqrt(v0^2 + 2g * d), where v is the final velocity, v0 is the initial velocity (which is the speed as it rolled off the table), g is the acceleration due to gravity, and d is the horizontal distance traveled. Substituting the given values, v = sqrt((4.81 m/s)^2 + 2 * 9.8 m/s^2 * 3.64 m) ≈ 8.69 m/s.
Learn more about acceleration due to gravity here:
https://brainly.com/question/14550373
#SPJ11
This question is about eclipses. If the Moon is: 1) precisely at conjunction with the Sun (as close to the Sun on the sky as it will get this month) and 2) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and 3 ) is near its apogee point (furthest from the Earth in its orbit) what type of eclipse could you see? Choose one: A. an annular solar eclipse B. a total solar eclipse C. a partial lunar eclipse D. a total lunar eclipse E. no type of eclipse is possible under the conditions given This question is about eclipses. If the Moon is: 1) in its first quarter phase (90 degrees east of the Sun along the ecliptic) 2) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and 3) is near its perigee point (closest to the Earth in its orbit) what type of eclipse could you see? Choose one: A. an annular solar eclipse B. a total solar eclipse C. a partial lunar eclipse D. a total lunar eclipse E. no type of eclipse is possible under the conditions given
The type of eclipse that would be visible if the Moon is precisely at conjunction with the Sun (as close to the Sun on the sky as it will get this month) and is at one of the nodes of its orbit (currently crossing the ecliptic plane) .
It is near its apogee point (furthest from the Earth in its orbit) is an annular solar eclipse.
The type of eclipse that would be visible if the Moon is in its first quarter phase (90 degrees east of the Sun along the ecliptic) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and is near its perigee point (closest to the Earth in its orbit) is a partial lunar eclipse.
An eclipse is a phenomenon that occurs when one celestial body passes in front of another and blocks the view of the other from a third celestial body. The Moon and the Sun's movements and positions determine whether we see a solar or lunar eclipse. A solar eclipse occurs when the Moon passes between the Sun and the Earth, blocking the Sun's light and casting a shadow on the Earth.
On the other hand, a lunar eclipse occurs when the Earth passes between the Sun and the Moon, casting a shadow on the Moon.There are different types of eclipses, and they depend on the positions of the celestial bodies at the time of the eclipse. For example, if the Moon is precisely at conjunction with the Sun, is at one of the nodes of its orbit, and is near its apogee point, an annular solar eclipse is visible. An annular solar eclipse is a type of solar eclipse that happens when the Moon's apparent size is smaller than that of the Sun.
As a result, the Sun appears as a bright ring, or annulus, surrounding the Moon's dark disk.A partial lunar eclipse occurs when the Earth passes between the Sun and the Moon, but the Moon does not pass through the Earth's shadow completely. Instead, only a part of the Moon passes through the Earth's shadow, resulting in a partial lunar eclipse.
Thus, the type of eclipse that would be visible if the Moon is precisely at conjunction with the Sun (as close to the Sun on the sky as it will get this month) and is at one of the nodes of its orbit (currently crossing the ecliptic plane) and is near its apogee point (furthest from the Earth in its orbit) is an annular solar eclipse. Similarly, the type of eclipse that would be visible if the Moon is in its first quarter phase (90 degrees east of the Sun along the ecliptic) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and is near its perigee point (closest to the Earth in its orbit) is a partial lunar eclipse.
To know more about solar eclipse :
brainly.com/question/4702388
#SPJ11
Suppose that you are experimenting with a 15 V source and two resistors: R₁= 2500 2 and R₂ = 25 Q. Find the current for a, b, c, and d below. What do you notice? a. R₂ in a circuit alone
The current through R₂ in the circuit alone is 0.6 A.Notice:When R₂ is in a circuit alone, the current flowing through it is 0.6 A.
Given that, the voltage, V = 15 VResistance, R₁ = 2500 ΩResistance, R₂ = 25 ΩWe know that the current (I) can be calculated using Ohm's Law, which states that the current (I) through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) between them.The formula to calculate current using Ohm's Law is given by:I = V / Rwhere I is the current, V is the voltage and R is the resistance.a. R₂ in a circuit alone:
To find the current for R₂ in the circuit alone, we need to use the formula: I = V / ROn substituting the given values, we getI = 15 / 25I = 0.6 ATherefore, the current through R₂ in the circuit alone is 0.6 A.Notice:When R₂ is in a circuit alone, the current flowing through it is 0.6 A.
Learn more about Voltage here,
https://brainly.com/question/27861305
#SPJ11
A tennis ball, with a mass of 0.05 kg, is accelerated with a rate of 5000 m/s2. how much force was applied for the tennis ball ?
The amount of force that was applied to the tennis ball is 250 N.
To solve the given problem, we will use Newton's second law of motion, which states that the net force acting on an object is equal to the product of its mass and acceleration.
The formula for Newton's second law of motion is given as:
F = ma
Where,
F is the net force acting on the object
m is the mass of the object
a is the acceleration of the object
Mass of the tennis ball, m = 0.05 kg
Rate of acceleration, a = 5000 m/s²
Now, we can use Newton's second law of motion to calculate the net force that was applied to the tennis ball:
F = ma
= 0.05 kg × 5000 m/s²
= 250 N
Therefore, the amount of force that was applied to the tennis ball is 250 N.
Learn more about the Newton's second law:
brainly.com/question/25545050
#SPJ11
if the electric field is zero everywhere inside a region of space, the potential must also be zero in that region.
choices:
true always
true sometimes
false always
more info is needed
none of the above
The correct answer is "true always." If the electric field is zero everywhere inside a region of space, it implies that there are no electric field lines passing through that region.
This indicates that there are no potential differences between any points within the region.
In electrostatics, the potential is defined as the amount of work needed to move a unit positive charge from one point to another against the electric field.
If there is no electric field, no work is required to move the charge, meaning there is no potential difference. Therefore, the potential is zero throughout the region.
This relationship is a consequence of the fundamental property of conservative electric fields. In conservative fields, the electric field can be expressed as the gradient of a scalar function called the electric potential.
Consequently, if the electric field is zero, the gradient of the electric potential is also zero, implying a constant potential throughout the region.
Hence, when the electric field is zero everywhere inside a region of space, the potential must also be zero in that region.
To learn more about electric field lines visit:
brainly.com/question/21661975
#SPJ11
you are riding a Ferris Wheel with a diameter of 19.3 m. You count the time it takes to go all the way around to be 38 s. How fast (in m/s) are you moving?
Round your answer to two (2) decimal places.
The speed (in m/s) of the Ferris wheel is 1.59.
The circumference of the Ferris wheel is given by the formula 2πr where r is the radius of the Ferris wheel.Calculation of the radius isR = d/2R = 19.3/2R = 9.65 m
The circumference can be given byC = 2πrC = 2 * 3.14 * 9.65C = 60.47 mNow the time taken to move around the Ferris wheel is given as 38 s.Now the speed of the Ferris wheel can be given asSpeed = distance/timeSpeed = 60.47/38Speed = 1.59 m/s.
Therefore, the speed (in m/s) of the Ferris wheel is 1.59.
Learn more about radius here,
https://brainly.com/question/27696929
#SPJ11
If the frequency of a wave of light is 6.8 x 108 Hz, what is it's wavelength. c = 3.0 x 108 m/s
A. 4.41 x 10-1 m/s
B. 2.04 x 1017 m/s
C. 4.41 x 10-1 m
D. 2.27 m
The wavelength of the wave of light is approximately 4.41 x 10^-1 m, which corresponds to option C) in the given choices.
The wavelength of a wave is inversely proportional to its frequency, according to the equation: λ = c / f, where λ represents wavelength, c represents the speed of light, and f represents frequency. To find the wavelength, we can substitute the given values into the equation.
Given that the frequency of the wave is 6.8 x 10^8 Hz and the speed of light is 3.0 x 10^8 m/s, we can calculate the wavelength as follows: λ = (3.0 x 10^8 m/s) / (6.8 x 10^8 Hz) ≈ 4.41 x 10^-1 m
Learn more about wavelength here:
https://brainly.com/question/31322456
#SPJ11
(a) Sketch the relation between equivalent widths measured in a spectrum and the number of absorbing atoms. What is this relation called and what are the three main regimes and the physical explanation for these variations in the relation (2 points
The relation between equivalent widths measured in a spectrum and the number of absorbing atoms is known as the curve of growth. It exhibits three main regimes- linear regime, damping regime, and saturated regime.
The curve of growth describes the relationship between the equivalent widths measured in a spectrum and the number of absorbing atoms. It is a fundamental concept in spectroscopy. The curve of growth can be divided into three main regimes: the linear regime, the saturated regime, and the damping regime.
In the linear regime, the equivalent width of the spectral line is directly proportional to the number of absorbing atoms. As more absorbing atoms are added, the equivalent width increases linearly. In the saturated regime, adding more absorbing atoms does not result in a significant increase in the equivalent width. At this point, the spectral line becomes saturated, and the equivalent width plateaus.
In the damping regime, adding more absorbing atoms causes the equivalent width to decrease. This occurs because the line broadens due to collisions between the absorbing atoms. As the line broadens, the overall strength of the absorption decreases, resulting in a smaller equivalent width.
Understanding the curve of growth and its regimes is crucial for analyzing spectral data and determining the number of absorbing atoms in a system. By studying these variations, scientists can gain valuable insights into the physical properties of the absorbing medium.
Learn more about spectrum here:
https://brainly.com/question/31059971
#SPJ11
Fig. 6. Total mechanical energy (TE=KE+PE) of the ball. The solid curve represents the prediction of our model.
When the ball loses mechanical energy to friction, the mechanical energy decreases accordingly. The graph shows that the mechanical energy of the ball gradually decreases to zero, as expected.
The total mechanical energy of the ball in motion. The solid curve represents the prediction of a model. Total mechanical energy is equal to the sum of kinetic energy (KE) and potential energy (PE).
The energy of the ball decreases due to friction as it travels from left to right. Since the ball is not acted upon by any external force, the total mechanical energy of the ball remains constant.
The graph shows that the potential energy of the ball decreases as the kinetic energy increases. When the ball reaches the maximum height, it has maximum potential energy and minimum kinetic energy.
Conversely, when the ball reaches the bottom of the track, it has minimum potential energy and maximum kinetic energy. When the ball loses mechanical energy to friction, the mechanical energy decreases accordingly.
This is evident in the graph as the curve drops downward. In the absence of any other forces, the ball would continue to roll indefinitely.
However, the graph shows that the mechanical energy of the ball gradually decreases to zero, as expected.
Learn more about mechanical energy here:
https://brainly.com/question/29408366
#SPJ11
A stone of mass 40 kg sits at the bottom of a bucket. A string of length 1.0 m is attached to the bucket and the whole thing is made to move in circles with the speed of 4.5 m/s. What is the magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory? 12 16 14 10 18 What work should be done by an external force to lift a 2.00 kg block up 2.00 m? O 59 J 98 J 78 J 69 J O:39 J
The force acting on the stone is the force it exerts on the bucket. Therefore, option (b) is 16 is the correct answer to the first question. Therefore, option (e) 39J is the correct answer to the second question.
The magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory is 40 N.
Work done by an external force to lift a 2.00 kg block up 2.00 m is 39 J.
According to the problem, A stone of mass 40 kg sits at the bottom of a bucket, and a string of length 1.0 m is attached to the bucket and the whole thing is made to move in circles with the speed of 4.5 m/s.
So, the centripetal force acting on the stone can be calculated by the formula F = mv2/r
where m is the mass of the stone, v is the speed of the bucket, and r is the length of the string.
We know that m = 40 kg, v = 4.5 m/s, and r = 1 m.So, F = 40 x 4.52/1= 810 N
Now, the force acting on the stone is the force it exerts on the bucket. Therefore, the magnitude of the force the stone exerts on the bucket at the lowest point of the trajectory is 810 N or 40 N (approximately).Therefore, option (b) is the correct answer to the first question.
Work done by an external force to lift a 2.00 kg block up 2.00 m can be calculated using the formulaW = mghwhere m is the mass of the block, g is the acceleration due to gravity, and h is the height through which the block is lifted.
We know that m = 2.00 kg, g = 9.81 m/s2, and h = 2.00 m.So, W = 2.00 x 9.81 x 2.00= 39.24 J or 39 J (approximately).
Therefore, option (e) is the correct answer to the second question.
Learn more about magnitude here:
https://brainly.com/question/31022175
#SPJ11