A system at equilibrium is shown below:

Ba(OH)2 ⇆ Ba2+ + OH-

If HCl were added to this system, what would happen?

A. The reaction would shift toward reactants and the solubility would decrease.
B. The reaction would be unaffected by this change.
C. The reaction would shift toward products and the solubility would decrease.
D. The reaction would shift toward reactants and the solubility would increase.
E. The reaction would shift toward products and the solubility would increase.

Answer: In the movie Dark Waters, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by the chemical company DuPont.

Explanation: In the movie Dark Waters, the call from the Kigers is the key moment that sets off the plot. The Kigers, who are farmers in West Virginia, call Robert Bilott, a corporate defense attorney, and ask for his help in investigating the strange deaths of their cattle. Bilott is reluctant to take on the case at first, but he eventually agrees to visit the Kigers' farm and see the situation for himself.

During his visit, Bilott discovers that the Kigers are just one of many families in the area who have experienced unexplained deaths and illnesses among their livestock, as well as health problems among their own family members. Bilott begins to suspect that the cause of these health issues is pollution from a nearby chemical plant owned by DuPont, a multinational chemical company.

Bilott takes on the case and begins a long and difficult legal battle against DuPont, uncovering evidence that the company had long known about the dangers of the chemicals it was using - specifically a substance called PFOA, which was used in the production of Teflon - but had covered up the evidence and misled regulators and the public about the risks.

In the end, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by DuPont, and sets off a series of events that ultimately lead to the exposure of corporate wrongdoing and the pursuit of justice for those affected by the pollution. The Kigers' call is a catalyst for change, prompting Bilott to take action and exposing the truth about a powerful and deceitful corporation.

Hope this helps, and have a great day!

The amount of water remaining after the reaction of a 5.50-g sample of CaO is reacted with 5.31 g of [tex]H_{2}O[/tex] is complete is 3.546 g.

From the case above, we are given the reaction:  

CaO + [tex]H_{2}O[/tex] → [tex]Ca(OH)_{2}[/tex]  

To solve this question, we can use the law of conservation of mass. This states that the total mass before and after a chemical reaction is equal.

The equation is

v = m ÷ M

v(CaO) = m ÷ M

= 5.5 g ÷ 56 g/mol

= 0.098 mol

v([tex]H_{2}O[/tex]) = 5.31 g ÷18 g/mol

= 0.295 mol

According to the equation:

v(CaO) : n([tex]H_{2}O[/tex])) = 1 : 1

CaO reacts completely, (tex]H_{2}O[/tex]) is in excess.

0.098 mol H2O reacts with CaO.

v([tex]H_{2}O[/tex]) = 0.295 - 0.098 = 0.197 mol of water will remain after the reaction is complete.

m([tex]H_{2}O[/tex]) = 0.197mol * 18g/mol = 3.546 g

Thus, the amount of water remaining after the reaction is complete is 3.546 g.

For more information about law of conservation of mass refers to the link: https://brainly.com/question/28711001

#SPJ11

Manganese (Mn) is a chemical element with the symbol Mn and atomic number 25. It is a transition metal that is essential for bone growth, among other things. The mass in grams of 3.22 x 10^20 Mn atoms, the number found in 1 kg of bone, is to be calculated.

The atomic mass of manganese is 54.94 g/mol, which means that 1 mol of manganese weighs 54.94 g. Since 1 kg equals 1000 g, the number of moles of manganese in 1 kg of bone is determined by dividing 1000 g by 54.94 g/mol.18.20 moles of manganese can be obtained by solving this equation as follows:1000 g ÷ 54.94 g/mol = 18.20 molIt is known that there are 6.02 x 10^23 atoms in 1 mole of any element.

Multiply the number of moles by Avogadro's number to obtain the number of atoms:18.20 mol x 6.02 x 10^23 atoms/mol = 1.096 x 10^25 atomsIn the bone, there are 1.096 x 10^25 manganese atoms. Because we want to determine the mass of 3.22 x 10^20 Mn atoms.

we must first convert the number of atoms into moles.1.796 x 10^-6 moles can be obtained by dividing 3.22 x 10^20 atoms by Avogadro's number:3.22 x 10^20 atoms ÷ 6.02 x 10^23 atoms/mol = 1.796 x 10^-6 mol Finally, we must convert this number of moles to grams.

Multiply the number of moles by the atomic mass to obtain the number of grams: 1.796 x 10^-6 mol x 54.94 g/mol = 9.88 x 10^-5 gThe mass in grams of 3.22 x 10^20 Mn atoms, the number found in 1 kg of bone, is 9.88 x 10^-5 g.

To know more about Manganese refer here:

https://brainly.com/question/29743410#

#SPJ11

The volume of the solution in milliliters is 547.13 mL.

How to calculate the volume of the solution in milliliters?

The molarity of the solution is given by;

Molarity = Number of moles of solute / Volume of solution in liters

Using the above formula, we can calculate the volume of the solution as;

Volume of solution in liters = Number of moles of solute / Molarity

Number of moles of CuNO3 can be determined as follows:

Number of moles = Given mass of the substance / Molar mass of the substance

= 7.66 g / (Cu: 63.55 g/mol + N: 14.01 g/mol + 3O: 3 x 16 g/mol)

= 0.05 mol

Substituting the values of molarity and number of moles of CuNO3 in the formula of volume of solution, we get:

Volume of solution in liters = Number of moles of solute / Molarity

= 0.05 mol / 0.140 M = 0.357 L

Converting the volume in liters to milliliters;

Volume in milliliters = Volume in liters × 1000

= 0.357 L × 1000= 357 mL

Thus, the volume of the solution in milliliters is 357 mL.

Learn more about volume of the solution here:

https://brainly.com/question/14710169#

#SPJ11

The material W is most likely a metal. The higher the thermal conductivity of a material, the faster heat will be transferred through it.

Thermal conductivity is the ability of a material to conduct heat, i.e., how quickly heat can be transferred through a material. It is a measure of the rate at which heat flows through a material when a temperature difference exists between two points in the material.

Materials with high thermal conductivity are good conductors of heat, meaning they allow heat to flow easily through them. Examples of materials with high thermal conductivity include metals like copper, aluminum, and silver. Materials with low thermal conductivity are poor conductors of heat, meaning they do not allow heat to flow easily through them. Examples of materials with low thermal conductivity include insulators like wood, plastic, and air.

To determine which material is most likely a metal, we need to look for the material with the highest thermal conductivity.

Material              Temperature after 30 seconds

W                         50°C

X                          40°C

Y                          30°C

Z                          20°C

From the table, we can see that material W had the highest temperature after 30 seconds, followed by material X, Y, and Z. This indicates that material W is the best conductor of heat, making it the most likely to be a metal.

To know more about thermal conductivity, visit:

https://brainly.com/question/7643131

#SPJ1

Answer:

0.0161 M

Explanation:

To find the molarity of the NaCl solution, we need to use the formula:

Molarity (M) = moles of solute / liters of solution

First, we need to calculate the number of moles of NaCl in the solution. We can do this by dividing the mass of NaCl by its molar mass. The molar mass of NaCl is 58.44 g/mol.

moles of NaCl = mass of NaCl / molar mass of NaCl

moles of NaCl = 6.24 g / 58.44 g/mol

moles of NaCl = 0.1066 mol

Now we can use the formula for molarity:

Molarity (M) = moles of solute / liters of solution

Molarity (M) = 0.1066 mol / 6.62 L

Molarity (M) = 0.0161 M

Therefore, the molarity of the student's NaCl solution is 0.0161 M.

Answer : The organic product of the reaction of ethanol and chromium(VI) is an alkoxide anion. The alkoxide anion can be used in a variety of reactions as a nucleophile.

The organic product of this redox reaction is an alkoxide. An alkoxide is an anion formed by the reaction of an alcohol with a metal or other basic compound. In this case, the alcohol used is ethanol and the metal ion is chromium(VI). The reaction involves the reduction of chromium(VI) to chromium(III).

The chromium(VI) acts as an oxidizing agent and is reduced, while the ethanol is oxidized, forming an alkoxide. In the reaction, the chromium(VI) is reduced to chromium(III), and the ethanol is oxidized, forming an alkoxide anion. The reaction can be represented by the following equation:  Cr(VI) + 2C2H5OH → Cr(III) + 2C2H5O–

The ethanol is oxidized to form an alkoxide anion, which is the organic product of the reaction. The alkoxide can then be used as a nucleophile in a variety of reactions.

Know more about ethanol here:

https://brainly.com/question/25002448

#SPJ11

The activation energy for a forward reaction is not the same as the activation energy for the reverse of the same reaction. It is because of the reason that activation energy is the energy needed for a reaction to occur.

The energy barrier for a forward reaction is distinct from the energy barrier for a backward reaction. The energy required to break bonds in the reactants is known as activation energy.

Only those molecules with sufficient kinetic energy can overcome the activation energy barrier and form new products. The energy that must be overcome in order to transform reactants into products is referred to as activation energy. If the activation energy for a reaction is lower, the reaction will proceed more quickly than if it were higher.

The activation energy of a forward reaction is not the same as the activation energy of a reverse reaction since the energy requirements for each reaction are unique.

To learn more about activation energy refer - https://brainly.com/question/13565255

#SPJ11

The correct answer for the alkane that is a liquid at room temperature is C₆H₁₄, also known as hexane.

Hexane is a hydrocarbon composed of six carbon atoms and fourteen hydrogen atoms. Its molecular weight is 86.178 g/mol, and it has a boiling point of 68.7°C (155.7°F).

Due to its moderately long hydrocarbon chain, it has intermolecular forces greater than the lower alkanes like CH₄ and C₃H₈ and so is not gas like CH₄ and C₃H₈.

On the other hand, in comparison to C₂₁H₄₄ and C₁₁H₂₄, C₆H₁₄ has a weak intermolecular force and therefore it is a liquid rather than solids like the former.

Hexane is insoluble in water but soluble in organic solvents, such as benzene, chloroform, and ether. Hexane is a colorless, volatile, and flammable liquid with a pungent odor.

So, other given compounds are either gases or solids at room temperature.

Therefore,  C₆H₁₄, also known as hexane is a thick liquid at room temperature.

To know more about  hexane, refer here:

https://brainly.com/question/30908383#

#SPJ11

The structure of 5-hydroxy-2-phenyl-3-hexanone is as follows:

The structure of 5-hydroxy-2-phenyl-3-hexanone is made up of a hexanone backbone, which is a six-carbon chain with a ketone functional group attached to the second carbon atom. The carbonyl group on the hexanone backbone has a phenyl group and a hydroxy group, which is a hydroxyl group connected to the fifth carbon atom of the hexanone backbone, attached to it.

The prefix 5-hydroxy-2-phenyl-3-hexanone indicates that the hydroxyl group is attached to the fifth carbon atom of the hexanone backbone, while the phenyl group is attached to the second carbon atom of the hexanone backbone.

The structural formula of 5-hydroxy-2-phenyl-3-hexanone is as follows:

In summary, the correct structure for 5-hydroxy-2-phenyl-3-hexanone is a hexanone backbone with a ketone functional group on the second carbon atom, a phenyl group attached to the second carbon atom, and a hydroxyl group attached to the fifth carbon atom. The structural formula of 5-hydroxy-2-phenyl-3-hexanone is given above.

To know more about  Hexanone backbone refer here:

https://brainly.com/question/30156644#

#SPJ11

The equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Therefore 2 hydrogen atoms must be present in the product in order for the equation to be balanced.

The chemical equation Ca + 2HCl -> CaCl2 + H2 represents the reaction between calcium (Ca) and hydrochloric acid (HCl) to produce calcium chloride (CaCl2) and hydrogen gas (H2).

To balance this equation, we need to ensure that the same number of atoms of each element is present on both sides of the equation. In this case, we have:

Therefore, the equation should be balanced as follows: Ca + 2HCl -> CaCl2 + H2. Thus 2 hydrogen atoms must be present in the product in order for the equation to be balanced.

To learn more about hydrogen; https://brainly.com/question/24433860

#SPJ11

Yes, the availability of oxygen and a high energy charge are required to obtain energy from acetyl CoA in the citric acid cycle.

During the citric acid cycle, the acetyl CoA is oxidized into carbon dioxide and water, which releases a large amount of energy in the form of ATP. This process occurs in the mitochondria of eukaryotic cells and requires a continuous supply of oxygen.

The availability of oxygen is essential as it serves as the final electron acceptor in the electron transport chain, which is responsible for generating the high energy charge in the form of ATP. Without oxygen, the electron transport chain cannot function, leading to a buildup of high energy intermediates that can be harmful to the cell.

A high energy charge is required for the citric acid cycle to proceed as it requires a large amount of ATP to drive the different reactions. The energy charge is maintained by the balance between ATP production and consumption within the cell. If the energy charge drops too low, the citric acid cycle slows down, leading to a decrease in ATP production.

In summary, the availability of oxygen and a high energy charge are both essential for obtaining energy from acetyl CoA in the citric acid cycle

To learn more about here:

brainly.com/question/30470177#

#SPJ4

The pH and the citrate ion concentration for a 0.05 M solution of citric acid which is a tricrotic acid and is present in citrus fruits are to be calculated. The formula of citric acid is C6H8O7.

It's three hydrogen atoms (H) have three different pKa values because of the differences in the proton-donating properties, which will be used to calculate the citrate ion concentration. The given formula of Citric acid is C6H8O7There are three acidic hydrogens in citric acid.

The acid dissociation constant, Ka, for citric acid is given as follows: Ka1 = 7.4 × 10−4Ka2 = 1.7 × 10−5Ka3 = 4.0 × 10−7Step 1: Writing the equation for the first dissociationKa1 = [H+][C6H7O7–] / [C6H8O7]where [H+] is hydrogen ion concentration, [C6H7O7–] is citrate ion concentration, and [C6H8O7] is citric acid concentration. Citrate ion concentration = C6H7O7–Citrate ion concentration = (0.05 − [H+C6H7O7−])/2= (0.05 − 3.7 × 10−5) / 2= 0.0248The concentration of the citrate ion is 0.0248.Step 6: Computing the pH from the hydrogen ion concentration pH = −log10[H+]pH = −log10(3.7 × 10−5)= 4.43The pH of a 0.05 M solution of citric acid is 4.43.

Read more about concentration :

https://brainly.com/question/17206790

#SPJ11

They are most likely at thermal equilibrium. This indicates that the particles are randomly distributed in their kinetic energy, clashing with one another, and bounce off the container's walls.

When the amount of forward reaction speed equal a rate of backward reaction, chemical equilibrium has occurred. In other words, neither the reactant nor product concentrations have changed significantly.

What is a good example of chemical equilibrium?

reactions where the total number of molecules as in reactants and products is equal. O2 (g) Plus N2 (g) 2NO, for instance (g) reactions in which there are more molecules in the reactants than in the products as a whole. Cl2 (g) Plus CO (g) COCl2, for instance (g)

They are most likely at thermal equilibrium. This indicates that the particles are randomly distributed in their kinetic energy, clashing with one another, and bounce off the container's walls.

To know more about equilibrium visit:

brainly.com/question/30694482

#SPJ9

question is - In gases the particles move rapidly in all directions, frequently colliding with each other and the side of the container. why?

For a case with 200% theoretical air, 33.3 kmol of air would be required per kmol of fuel. It is given that the stoichiometric combustion of ethane isC2H6 + 3.5(O2 + 3.76N2) → 2CO2 + 3H2O + 13.16N2As per the equation, it takes 3.5 kmol of (O2 + 3.76N2) to burn 1 kmol of ethane, and for 200% theoretical air, 7 kmol of (O2 + 3.76N2) would be used. Hence, option (d) is correct.

Therefore, 2 kmol of ethane would require 7 kmol of (O2 + 3.76N2). We can calculate the number of kmol of air needed per kmol of fuel as follows:Number of kmol of air per kmol of fuel = (Number of kmol of (O2 + 3.76N2) per kmol

of fuel) / 0.21Number of kmol of air per kmol of fuel = (7/2) / 0.21Number of kmol of air per kmol of fuel = 16.67 / 0.21 = 79.29 ≈ 33.3 kmol of airHence, option (d) is correct.

For more similar questions on topic stoichiometric combustion

brainly.com/question/14077954

#SPJ11

Iodine-131 is a radioactive isotope with a half life of 8 days. radioactive decay is a first order reaction. the initial concentration of i-131 is 0.1802 m. The concentration of iodine-131 after 31.0 days is 0.0113 m.

Radioactive decay is the procedure by which unstable atomic nuclei lose energy by emitting particles or radiation. This transformation of a radioactive nucleus into a more stable one typically involves the emission of one or more particles or photons. The products of radioactive decay are atoms of one or more various elements, known as radiogenic isotopes, that have chemical characteristics distinct from those of the original radioactive material. Let's now address the question.

The concentration of iodine-131 after 31.0 days can be calculated using the half-life of the isotope and the initial concentration. The concentration of I-131 can be determined using the following formula:

Nf = N0 (1/2)^(t/T1/2)

Where: Nf = final concentrationN0 = initial concentration, t = time elapsedT1/2 = half-life of the isotope

Given values are as follows:

Initial concentration N0 = 0.1802 m

Half-life T1/2 = 8 days

Elapsed time t = 31.0 days

Using the formula,

Nf = N0 (1/2)^(t/T1/2)

Nf = 0.1802 m (1/2)^(31.0/8)

Nf = 0.0113 m

Therefore, the concentration of iodine-131 after 31.0 days is 0.0113 m.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11

Answer:

The boiling point of water depends on the pressure exerted on its surface. At standard atmospheric pressure, which is about 101.3 kPa, water boils at 100°C (212°F).

However, in this case, the pressure on the surface of water is 30 kPa, which is lower than standard atmospheric pressure. As the pressure decreases, the boiling point of water also decreases.

To determine the boiling point of water at 30 kPa, we can use a steam table or a phase diagram of water. According to a steam table, at 30 kPa, the boiling point of water is approximately 35.3°C (95.5°F).

Therefore, if the pressure on the surface of the water is 30 kPa, the water will boil at approximately 30°C

The mass in g of sucrose required to make 250 ml of 12.5% (w/v) sucrose solution is: 31.25 g

To calculate the mass of sucrose required to make 250 mL of a 12.5% (w/v) sucrose solution, we need to use the formula

mass of solute (g) = (desired %)(volume of solution (mL))/100.

In this case, the mass of sucrose is equal to (12.5)(250 mL)/100 = 31.25 g.

To explain the calculation further, the term "w/v" indicates the weight-to-volume ratio of the solution, meaning 12.5 g of sucrose per 100 mL of solution.

To calculate the mass of sucrose needed for 250 mL of the solution, you must multiply the desired percentage of 12.5 by the desired volume of the solution of 250 mL and then divide by 100. This gives us 31.25 g, which is the answer to one decimal place.

To know more about sucrose refer here:

https://brainly.com/question/29186350#

#SPJ11

This herd of cattle released 8.44 metric tons of methane (CH4) into the atmosphere. Methane is composed of one atom of carbon and four atoms of hydrogen, so this 8.44 metric tons of methane contained (8,440 kg) x (12.01/16.05) g/kg = 6,309 kg (6.31 metric tons).

To answer the given question, we need to know the molecular formula of methane, which is CH4. The atomic mass of carbon is 12.01 g/mol and the atomic mass of hydrogen is 1.01 g/mol. Therefore, the molecular mass of methane is:

Molecular mass of CH4 = (1 x 12.01) + (4 x 1.01) = 16.05 g/mol
Now, we need to convert the amount of methane released into metric tons.
1 metric ton = 1,000 kg
8.44 metric tons = 8.44 x 1,000 = 8,440 kg

To convert the mass of methane into mass of carbon, we need to use the ratio of the molecular masses of carbon and methane.

1 mol of CH4 contains 1 mol of carbon
1 mol of CH4 has a mass of 16.05 g
1 mol of carbon has a mass of 12.01 g

Therefore,
16.05 g of CH4 contains 12.01 g of carbon
1 kg of CH4 contains (12.01/16.05) g of carbon

To convert the mass of methane into mass of carbon, we need to multiply it by the ratio of the molecular masses of carbon and methane.
Mass of carbon = (8,440 kg) x (12.01/16.05) g/kg
= 6,309 kg

Therefore, the herd of cattle released 6,309 kg (or 6.31 metric tons) of carbon into the atmosphere through the release of 8.44 metric tons of methane.

For more questions related to metric tons.

https://brainly.com/question/4062096

#SPJ11

Answer:

factor = 5.5 3 sig figs = 5.50

The pressure will: decrease by the same factor

Explanation:

24.2/4.40

The volume will increase by a factor of 5.5.

The ideal gas law states that;

PV = nRT,

where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature expressed in kelvin (K).

However, in this case, the temperature is constant, which means that we can simplify the formula to

PV = constant

or

V₁P₁ = V₂P₂

where V₁ is the initial volume, P₁ is the initial pressure, V₂ is the final volume, and P₂ is the final pressure.

Since the pressure is constant in this case, the equation becomes

V₁ = V₂ (when P is constant).

Therefore, the volume increased by a factor of:

V₂/V₁ = 24.2 L/4.40 L = 5.5 times.

To learn more about the volume of a gas refer -https://brainly.com/question/28961686

#SPJ11

The percent yield for this reaction is 74.81%.

Divide the actual yield of 4.29 g by the theoretical yield of 5.78 g and then multiply by 100.

4.29 g/5.78 g x 100 = 74.81%

The percent yield is the measurement of how much of the expected product was actually produced in the reaction.

It is calculated by dividing the actual yield of a given reaction by the theoretical yield and then multiplying by 100.

The actual yield is the amount of product actually produced in a reaction, while the theoretical yield is the maximum amount of product that can be produced.

The percent yield helps to determine how efficient a reaction is and how successful it was.

When the actual yield is lower than the theoretical yield, it indicates that the reaction has not been completed fully.

This can be due to a variety of factors, such as not enough reactants or the wrong temperature or pressure being used.

The percent yield can be used to compare different reactions and identify which one is the most efficient and successful. It can also be used to improve reaction conditions and make them more efficient.

Overall, the percent yield of a reaction helps to provide valuable information about the efficiency of the reaction and can be used to improve it.

Knowing the percent yield can help ensure that the most optimal results are achieved in the reaction.

to know more about percent yield refer here:

https://brainly.com/question/17042787#

#SPJ11

(a) We would need 7 pies to serve a slice of pie with each cup of hot chocolate.

(b) There would be 6 slices of pie left over.

From item 6, we know that there are 50 cups of hot chocolate to be served.

Since each pie can be cut into 8 slices, we would need to serve 50/8 = 6.25 pies.

Since we cannot serve a fractional pie, we would need to round up to the next whole number of pies, which is 7.

To find out how many slices of pie would be left over, we need to calculate the total number of slices of pie and subtract the number of slices used to serve the hot chocolate.

Total number of slices of pie = 7 pies x 8 slices per pie = 56 slices

Number of slices used to serve the hot chocolate = 50 slices

Therefore, the number of slices of pie left over would be:

56 slices - 50 slices = 6 slices

Learn more about pieces of pie here: https://brainly.com/question/11694372

#SPJ1

There are approximately 5.418 x 10^23 atoms in 0.30 moles of sulfur dioxide (SO2) gas.

To find out how many atoms are in 0.30 moles of sulfur dioxide (SO2), we need to first determine the number of molecules and then find out the total number of atoms.

A mole is a unit that represents 6.022 x 10^23 entities (atoms, molecules, ions, etc.) of a substance. This number is called Avogadro's number.

Determine the number of SO2 molecules in 0.30 moles:

Calculate the total number of atoms in the SO2 molecules:

Each molecule of sulfur dioxide (SO2) consists of one sulfur atom and two oxygen atoms. Thus, there are three atoms per SO2 molecule.

So, there are approximately 5.418 x 10^23 atoms in 0.30 moles of sulfur dioxide (SO2) gas.

Read more about atoms here:

https://brainly.com/question/17545314

#SPJ1

The oxygen levels in the atmosphere were very low until about 2 billion years ago because of photosynthetic organisms like cyanobacteria releasing oxygen as a byproduct of their metabolism.

The oxygen levels in the atmosphere were very low until about 2 billion years ago because of the lack of oxygenic photosynthesis. The first known oxygen-producing organisms were cyanobacteria, which appeared around 2.3 billion years ago.

Cyanobacteria was the first organism that could perform photosynthesis and release oxygen into the atmosphere as a by-product. They converted the Earth's anaerobic atmosphere into an oxygen-rich environment. The oxygenation event occurred over several hundred million years, transforming the Earth's atmosphere from oxygen-poor to oxygen-rich.

Anaerobic bacteria thrived in the planet's atmosphere because the available oxygen was scarce. The lack of oxygenic photosynthesis resulted in low levels of oxygen in the Earth's atmosphere. However, oxygenic photosynthesis by cyanobacteria increased the levels of oxygen in the atmosphere.

The planet's atmospheric composition is currently around 78 percent nitrogen, 21 percent oxygen, and a few other trace gases.

To know more about photosynthetic organisms, refer here:

https://brainly.com/question/5870637

#SPJ11

Yes, you have enough sulfur for three trials. This is because 1.9 g of sulfur is equal to 0.09 mol, which is enough to do three trials of 0.030 mol each. Use the molar mass of sulfur, which is 32 g/mol.

Convert the mass of sulfur given to moles.

1.9 g / 32 g/mol = 0.09 mol

The moles by the number of trials you need to do:

0.09 mol x 3 trials = 0.27 mol

The moles back to grams to make sure you have enough sulfur:

0.27 mol x 32 g/mol = 8.64 g

Since the amount of sulfur given is more than the amount you need for the three trials (1.9 g > 8.64 g), you have enough sulfur.

to know more about sulfur refer here:

https://brainly.com/question/1478186#

#SPJ11

"The melting of a substance at its melting point is an isothermal process" is true.

An isothermal process is a thermodynamic method in which the temperature of a substance remains constant as heat is added or removed.

A reversible expansion or contraction of a gas is the most straightforward example of an isothermal process.

When a gas expands, it does work on the surroundings, and the energy from the gas is transferred to the surroundings. An isothermal process occurs when the gas expands slowly enough that the temperature remains constant.

Here are some additional points to remember: If the pressure on a gas increases, the gas compresses and loses energy in the form of heat. An isothermal process is one in which the temperature of the gas remains constant. So, when a gas is compressed in an isothermal process, the energy lost as heat is transferred back to the gas as work.

The opposite happens during a process in which the gas expands. The energy expended in work is absorbed by the gas, and the heat lost is restored to the gas. The temperature of the gas remains constant during the process.

To know more about  Isothermal process refer here:

https://brainly.com/question/12023162#

#SPJ11

Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Explanation:

Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.

Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.

The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.

Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Learn more about diamagnetism here:

https://brainly.com/question/15462756#

#SPJ11

The reaction scheme is as follows:

Styrene (monomer) + Azobisisobutyronitrile (initiator) →  Radical polymers + Nitrile groups

Radical polymers then undergo combination or disproportionation as the possible modes of termination:

Combination:

Radical polymers + Radical polymers → Polystyrene (end product)

Disproportionation:

Radical polymers → Polystyrene + Styrene (monomer)

Polymerization of styrene is a chain-growth process initiated by thermolysis of azobisisobutyronitrile, which is a free radical initiator.

During the reaction, styrene molecules act as the monomers, while azobisisobutyronitrile molecules provide the initiating radicals, which combine to form a growing polymer chain.

These polymer chains can either terminate through combination, where two growing chains react with each other and form a new polymer chain, or through disproportionation,

where a growing polymer chain reacts with a styrene molecule to form a new polymer chain and a styrene molecule.

Thermolysis, which is the decomposition of molecules due to high temperature, is the mechanism of initiation of the polymerization of styrene.

This process breaks down the azobisisobutyronitrile molecules into the two radicals, which act as the initiators for the polymerization.

The two possible modes of termination, combination and disproportionation, then occur, resulting in the formation of polystyrene as the end product.

to know more about styrene refer here:

https://brainly.com/question/14546335#

#SPJ11

When potassium chloride (KCl) is dissolved in water, it produces both potassium (K+) and chloride (Cl-) ions. Therefore, the correct answer is K+ &  Cl-.

When KCl is dissolved in water, the ions K+ and Cl- are produced. The molecular formula for potassium chloride is KCl. It's a salt that is made up of two ions: potassium ions (K+) and chloride ions (Cl-). When the salt is put into water, the ions dissociate, causing the salt to dissolve.

Water is a polar molecule, which means it has a positive and negative end. When KCl is put in water, the negatively charged chlorine atoms are drawn to the positive end of the water molecule, and the positively charged potassium atoms are drawn to the negative end.

As a result, the salt dissolves completely, producing the K+ and Cl- ions in the solution. Thus, the correct answer is ions K+ and Cl-.

To know more about KCl, refer here:

https://brainly.com/question/23614978#

#SPJ11

The final pressure and temperature are 1.131 atm and (0.9786 mol/ 0.8546 mol).

A chemical equation serves as a metaphor for the transformation of reactants into products. Iron sulfide, for instance, is created when iron (Fe) and sulfur (S) mix (FeS). Fe(s) + S(s) = FeS (s) Iron reacts with sulfur, as indicated by the + sign.

For the complete combustion of butane, the following chemical equation is balanced:

2C4H10 + 13O2 → 8CO2 + 10H2O

mass of butane = (number of moles of butane) x (molar mass of butane)

= (number of moles of oxygen) x (molar mass of oxygen)

= (mass of oxygen) / (molar mass of oxygen) x (molar mass of butane)

The mass of oxygen can be calculated from the ideal gas law:

PV = nRT

n = PV / RT

The amount of moles of oxygen can be determined using this equation with P = 1 atm, V = 5 L, and T = 500 K:

n = (1 atm) x (5 L) / [(0.08206 L atm mol⁻¹ K⁻¹) x (500 K)]

= 0.1222 mol

The mass of butane is:

mass of butane = (0.1222 mol) x (58.12 g/mol)

= 7.11 g

Before the reaction, there were n = 0.1222 mol (butane) + (13/2) x 0.1222 mol moles of gas in the vessel (oxygen)

= 0.8546 mol

The balanced equation:

n = (8/2) x 0.1222 mol (carbon dioxide) + (10/2) x 0.1222 mol (water vapor)

= 0.9786 mol

Solving for P2, we get:

P2 = (n2 / n1) x (T1 / T2) x P1

= (0.9786 mol / 0.8546 mol) x (500 K / T2) x (1 atm)

= 1.131 atm

Solving for T2, we get:

T2 = (n2 / n1) x (P1 / P2) x T1

= (0.9786 mol / 0.8546 mol)

To know more about final pressure visit:-

https://brainly.com/question/30862968

#SPJ1

Question:

A vessel contains a stoichiometric mixture of butane and air. The vessel is at a temperature of 500 K, a pressure of 1 atm, and has a volume of 5 L. If the reaction goes to completion, what volume of gas will be present in the vessel after the reaction and what will be the final pressure and temperature? Assume ideal gas behavior and that the reaction occurs with complete combustion.