a steady current was passed through molten s n s o 4 until 5.51 g of metallic tin was produced. calculate the coulombs of electricity used.

The most likely range of values for human body density is 0.900 - 1.100 g/cc.(A)

Option (b) 1.09 - 1.105 g/cc is not the most likely range of values for human body density.

Option (c) 0.99 - 1.02 g/cc and option (d) 1.02-1.08 g/cc are also not the most likely range of values for human body density.

Body density is the mass of the human body divided by the volume it occupies. The density of the human body depends on the mass and volume of the body's internal organs, muscle mass, and the amount of adipose tissue present in the body.

The density of the human body typically ranges from 0.900 g/cc to 1.100 g/cc. This range may vary depending on several factors, including age, gender, body composition, and other health factors.

However, the most likely range of values for human body density is 0.900 - 1.100 g/cc.

To know more about adipose tissue click on below link:

https://brainly.com/question/30782617#

#SPJ11

Answer : To prepare 3 mL of 0.24 M sucrose solution from a stock solution of 0.6 M sucrose, 1.2 mL of the stock solution and 1.8 mL of water should be used.

The amount of 0.6 Molar sucrose needed to prepare 3 mL of 0.24 Molar sucrose solution, as well as the volume of water required, can be calculated using the M1V1 = M2V2 formula. Where M1 is the molarity of the stock solution, V1 is the volume of the stock solution required, M2 is the desired molarity of the solution to be prepared, and V2 is the volume of the solution to be prepared.

Given that the stock solution of sucrose is 0.6 M, and we need to prepare 3 mL of a 0.24 M solution, we can use the formula:
0.6 M x V1 = 0.24 M x 3 mL Solving for V1:
V1 = (0.24 M x 3 mL)/0.6 M
V1 = 1.2 mL

This means that 1.2 mL of the stock solution of 0.6 M sucrose is required to prepare 3 mL of 0.24 M sucrose solution.
The volume of water required can be calculated by subtracting the volume of the stock solution from the total volume of the solution to be prepared: Volume of water = 3 mL - 1.2 mL and Volume of water = 1.8 mL

Know more about sucrose solution here:

https://brainly.com/question/3850162

#SPJ11

Yes, it is possible to use the same colored central atom to make a model for all of these molecules. This is because the central atom in all of these molecules is the same, so it does not matter what color it is. The other atoms attached to the central atom will determine the shape of the molecule.

All the molecules have the same central atom because they are all hydrocarbons with the general formula CnH2n+2. The only difference between them is the number of carbon atoms that are present.For example, methane (CH4), ethane (C2H6), propane (C3H8), and butane (C4H10) are all hydrocarbons, and they all have Carbon as their central atom. The number of hydrogen atoms in each molecule varies based on the number of carbon atoms present.For instance, Methane (CH4) has one carbon atom and four hydrogen atoms, Ethane (C2H6) has two carbon atoms and six hydrogen atoms, Propane (C3H8) has three carbon atoms and eight hydrogen atoms, and Butane (C4H10) has four carbon atoms and ten hydrogen atoms. Therefore, you can use the same central atom, Carbon (C), to create a model for all of these molecules.

For more such questions on Central atom

https://brainly.com/question/15088200

#SPJ11

The mixing pair of reactants will result in a precipitation reaction are:a) K2SO4(aq) and Hg2(NO3)2(aq)The reaction can be represented as:K2SO4(aq) + Hg2(NO3)2(aq) → 2KNO3(aq) + Hg2SO4(s)

Precipitation reactions occur when cations and anions come together to form an insoluble ionic compound or salt, also known as a precipitate, that settles out of the solution because it is not water-soluble.The process involves two solutions containing soluble salts that combine and form an insoluble compound that appears as a solid, called a precipitate, which settles at the bottom of the container.

Precipitation reactions can occur when an insoluble substance, such as a salt or a solid, is produced as a result of combining two or more solutions with specific ions. It is necessary to mix two solutions that contain ions that will react and produce an insoluble compound or a precipitate.For example, K2SO4(aq) + Hg2(NO3)2(aq) → 2KNO3(aq) + Hg2SO4(s)This equation represents a precipitation reaction because Hg2SO4(s), an insoluble solid, forms when K2SO4(aq) and Hg2(NO3)2(aq) are combined.

Learn more about precipitation reactions at:

https://brainly.com/question/29762381

#SPJ11

Answer: Approximately 0.00033 moles of oxygen will be released from one liter of blood containing 45 grams of hemoglobin when it is transferred from 60 torr, pH 7.6, to 20 torr, pH 7.2.

First of all, the amount of hemoglobin in the given amount of blood has to be determined using the given data: Amount of hemoglobin in 1 L of blood = 45 g, Hemoglobin's molecular weight is 68,000 g/mol. : Number of moles of hemoglobin = 45/68000 = 0.000662 moles. After that, use the fact that the partial pressure of oxygen is related to the amount of dissolved oxygen, given the oxygen-hemoglobin equilibrium equation.

The formula for dissolved oxygen can be expressed as: Dissolved O2 = PO2 x solubility of O2PO2 = Partial pressure of oxygen in blood = 60 torr (initial) and 20 torr (final). Solubility of oxygen in blood can be determined from the table, which gives solubility as 0.0031 mol/L torr at 37°C.

The calculation of dissolved oxygen under initial and final conditions is as follows:Initial dissolved oxygen = 60 torr × 0.0031 mol/L torr = 0.186 mol/L Final dissolved oxygen = 20 torr × 0.0031 mol/L torr = 0.062 mol/L Thus, the amount of dissolved oxygen that has been released is the difference between the initial and final dissolved oxygen:Amount of dissolved oxygen released = initial dissolved oxygen - final dissolved oxygen= 0.186 - 0.062 = 0.124 mol/L

Amount of oxygen released = number of moles of hemoglobin × 4 × 0.124= 0.000662 × 4 × 0.124= 0.00033 moles

Know more about hemoglobin here:

https://brainly.com/question/15011428

#SPJ11

In an experiment, there are several things that you could do to drive the reaction forward. Two specific procedural steps that you could do in the experiment to drive the reaction forward are as follows:1. Increasing the temperature: The rate of the reaction increases with an increase in temperature.

The higher the temperature, the faster the particles will move, resulting in more collisions that are energetic enough to cause a reaction. If the temperature is lowered, then the reaction rate will slow down.2. Increasing the concentration of reactants: The rate of the reaction increases with an increase in the concentration of reactants.

If the concentration of reactants is high, then there will be more collisions between the molecules, resulting in a faster reaction. However, if the concentration is low, then there will be fewer collisions, resulting in a slower reaction. Thus, these are two specific procedural steps that you could do in the experiment to drive the reaction forward.

To know more about Reaction forward refer here:

https://brainly.com/question/8592296#

#SPJ11

The metal hydroxide that should be soluble in water among LiOH, CuOH, AgOH, Cu(OH)₂, and TlOH is LiOH.

1. LiOH: Lithium hydroxide (LiOH) is an alkali metal hydroxide, and alkali metal hydroxides are generally soluble in water. So, LiOH is soluble.

2. CuOH: Copper(I) hydroxide (CuOH) is a transition metal hydroxide, which are typically insoluble. Therefore, CuOH is not soluble.

3. AgOH: Silver hydroxide (AgOH) is also a transition metal hydroxide and is insoluble in water.

4. Cu(OH)₂: Copper(II) hydroxide (Cu(OH)₂) is another transition metal hydroxide and is insoluble in water.

5. TlOH: Thallium hydroxide (TlOH) is also a transition metal hydroxide, and like most transition metal hydroxides, it is insoluble in water.

In conclusion, among the given metal hydroxides, LiOH is soluble in water.

To know more about metal hydroxide, refer here:

https://brainly.com/question/14407261#

#SPJ11

1- From Portugal to Senegal, use the Canary Current

2- The current from #1 is a wind driven boundary surface current

The ocean is divided into five major gyres (circulating currents). The North Pacific, South Pacific, North Atlantic, South Atlantic, and Indian Ocean gyres are the most well-known. The ocean's currents are made up of the water that circulates through each gyre.

3- From Senegal to Venezuela, use the S. Equatorial Current

4- From Venezuela, stay close to the coast and sail south with the Brazil Current to reach Argentina.

5-  From Argentina, go west around Cape Horn against the Antarctic Circumpolar Current, and sail north with the Peru Current to reach Ecuador

6- Which current from #4 or 5 is an eastern boundary surface current? The Peru Current

7- Depart Ecuador on a westward course using the South Equatorial Current to reach Papua New Guinea

8- Sail through the Celebes and South China Seas to reach the Sri Lanka. Here you will pick up

to know more about water currents , visit ;

brainly.com/question/30162398

#SPJ1

A mineral contains 675 parent atoms and 225 daughter atoms and the half-life for the radioactive element is 40 million years, the age of the rock is: approximately 46.8 million years

The half-life of the radioactive substance is 40 million years. The number of parent atoms is 675 and the number of daughter atoms is 225. To calculate the age of the rock, we must first calculate the number of half-lives. The number of daughter atoms increases as time passes, while the number of parent atoms decreases.

After each half-life, the number of parent atoms decreases by 50%, and the number of daughter atoms increases by 50%. For example, after one half-life, 337.5 parent atoms remain, and 562.5 daughter atoms have been produced. The rock's age can be determined by determining how many half-lives have elapsed. In order to calculate the number of half-lives, the following equation is used:

The number of parent atoms remaining = the original number of parent atoms × (1/2)number of half-lives
Since the initial number of parent atoms is 675, we have:
[tex]225 = 675 × (1/2)number of half-lives[/tex]

Solving for the number of half-lives, we get:
[tex]number of half-lives = log(225/675) ÷ log(1/2) ≈ 1.17[/tex]

Since one half-life is 40 million years, the age of the rock is:
Age = number of half-lives × half-life
Age = 1.17 × 40 million years = 46.8 million years

Therefore, the age of the rock is approximately 46.8 million years.

To know more about radioactive refer here:

https://brainly.com/question/1770619#

#SPJ11

One tube has a buffered solution + acid and the other tube has water + acid. To decide whether or not the solution is buffered, a simple pH test can be done. An acid-base indicator can be used to determine the pH of each solution.

A buffered solution is defined as a solution that can withstand minor changes in pH upon the addition of small amounts of an acid or base.

Consider the following steps:

Learn more about buffer: https://brainly.com/question/9458699

#SPJ11

The aldol reaction involves the reaction of an aldehyde or ketone with an enolate ion to form a β-hydroxyaldehyde or β-hydroxyketone, followed by a dehydration to form a double bond.

The aldol reaction is an important organic reaction in the formation of new carbon–carbon bonds. The reaction is named after the aldol reaction product, which contains both aldehyde and alcohol groups.

The aldol addition reaction has three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation. These steps are explained below:

(1) Deprotonation: In the first step of the aldol reaction, the base removes a proton from the α-carbon of the carbonyl compound, which leads to the formation of the enolate ion.

The enolate ion is a resonance-stabilized anion that contains a negative charge on the oxygen atom and a double bond between the carbon and oxygen atoms.

(2) Nucleophilic attack: In the second step of the aldol reaction, the enolate ion acts as a nucleophile and attacks the carbonyl group of another molecule of the aldehyde or ketone.

This leads to the formation of a β-hydroxyaldehyde or β-hydroxyketone intermediate.

(3) Protonation: In the final step of the aldol reaction, the β-hydroxyaldehyde or β-hydroxyketone intermediate is protonated by the acid.

This leads to the formation of the aldol addition product, which contains a new carbon–carbon bond.

Thus, the aldol addition reaction involves three mechanistic steps, which are deprotonation, nucleophilic attack, and protonation.

These steps are essential for the formation of the aldol addition product, which contains a new carbon–carbon bond.

The aldol reaction is an important organic reaction that is widely used in the synthesis of natural products and pharmaceuticals.

to know more about aldehyde refer here:

https://brainly.com/question/30722723#

#SPJ11

The conjugate base of CH₃NH₃ is CH₃NH₂⁻.

The conjugate base is the species that is formed when an acid donates a proton (H+). In this case, CH₃NH₃ is acid, and CH₃NH₂⁻ is its conjugate base. CH₃NH₂⁻  is formed when the acid CH₃NH₃ donates a proton to another molecule.

To understand how CH₃NH₃donates a proton to become CH₃NH₂⁻ , it is important to first understand the acid-base reaction. An acid-base reaction is a reaction where an acid donates a proton to a base, forming salt and water. In this case, CH₃NH₃ donates a proton to the base, forming CH₃NH₂⁻  and a water molecule. The equation for this reaction is as follows:

CH₃NH₃ + Base --> CH₃NH₂⁻  + Salt + H₂O

It is important to note that in this reaction, the base is not specifically stated as it can be any molecule capable of accepting a proton.

To summarize, the conjugate base of CH₃NH₃ is CH₃NH₂⁻ . This species is formed when the acid CH₃NH₃ donates a proton to a base, forming salt and water.

To know more about conjugate bases, refer here:

https://brainly.com/question/30225100#

#SPJ4

The ability of open systems to fight off deterioration, sustain themselves and grow is Negative Entropy. Correct answer is option C

Negative Entropy is an important concept in thermodynamics and physics, where it is defined as a decrease in the entropy of a system. Entropy is the measure of randomness or disorder in a system, so negative entropy indicates that a system is becoming more organized, or that it is moving away from equilibrium.

This can be seen in the evolution of life, where species become more complex and adaptive over time, as well as in the growth of technology, where innovations allow us to become more efficient and productive. In essence, Negative Entropy is the power that allows open systems to improve and evolve. Therefore Correct answer is option C

Know more about thermodynamics here:

https://brainly.com/question/1368306

#SPJ11

The pH of the solution at the equivalence point is 7. (after titration).

Equivalence point in a titration: When titrating an acid and a base, the equivalence point is the point where the stoichiometric amounts of the acid and base have reacted. This means that all the acid present in the solution has been neutralized by the base. Likewise, all the base present in the solution has been neutralized by the acid.The pH at the equivalence point: The pH at the equivalence point depends on the nature of the acid and the base. For example, if a strong acid and a strong base are titrated, the pH at the equivalence point is 7.00. On the other hand, if a strong acid and a weak base are titrated, the pH at the equivalence point is less than 7.00. Similarly, if a weak acid and a strong base are titrated, the pH at the equivalence point is greater than 7.00. The pH at the equivalence point can be determined using a few formulas. To determine the pH of the solution at the equivalence point when a 100.0 mL sample of 0.18 M HClO4 is titrated with 0.27 M LiOH,

Steps: 1. Calculate the moles of HClO4 and LiOH at the equivalence point: Moles of HClO4 = volume (L) x concentration (M) = 0.1 L x 0.18 mol/L = 0.018 mol.  Moles of LiOH = volume (L) x concentration (M) = 0.06667 L x 0.27 mol/L = 0.018 mol

Step: 2. Since the moles of HClO4 and LiOH are equal at the equivalence point, the reaction between them is complete. The product of the reaction is water and a salt (LiClO4). The salt will not affect the pH, as Li+ and ClO4- ions do not hydrolyze in water.

Step: 3. At the equivalence point, the pH is determined by the concentration of H2O. Since water's pH is 7 at 25°C, the pH of the solution at the equivalence point is 7. (after titration).

Learn more about equivalent point and titration here, https://brainly.com/question/23502649

#SPJ11

The time taken by the same amount of gaseous Xe to effuse from the same container under identical conditions will be inversely proportional to the square root of its molar mass.

How long will it take for the same amount of gaseous Xe to effuse from the same container under identical conditions? According to Graham's law of effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass, i.e. the heavier the gas, the slower the effusion rate. The effusion rate of two gases, A and B, can be related to their molar masses, MA and MB, as follows:

RA/RB = √MB/MA

where RA is the rate of effusion of gas A, and RB is the rate of effusion of gas B. The ratio of the rates of effusion is the same as the ratio of the molecular speeds. Therefore, the time required by gases A and B to effuse from a container under identical conditions is also inversely proportional to the square root of their molar masses.TA/TB = √MA/MBwhere TA is the time required for gas A to effuse, and TB is the time required for gas B to effuse.

Learn more about effusion at  brainly.com/question/28320456

#SPJ11

The most significant commercially produced fibers include nylons.

For more information on nylon kindly visit to

https://brainly.com/question/10278626

#SPJ1

Answer: 1 mole 

Explanation:

The test in which the glucose molecules attached to hemoglobin A1 is being measured is known as Hemoglobin A1c (HbA1c) test.

The Hemoglobin A1c (HbA1c) test is a blood test that calculates the average blood sugar level over the previous two to three months. It is used to diagnose prediabetes and type 2 diabetes. It's also utilized to check whether diabetes is under control for those who already have it.

The Hemoglobin A1c test result is expressed as a percentage. A normal Hemoglobin A1c level for someone without diabetes is typically less than 5.7 percent. The suggested target Hemoglobin A1c level for someone with diabetes is usually less than 7%.

A high Hemoglobin A1c level indicates that a person has a higher risk of diabetes complications. In people with diabetes, high Hemoglobin A1c levels can increase the likelihood of heart disease, kidney disease, nerve damage, and vision issues.

Therefore the answer is Hemoglobin A1c (HbA1c) test.

To learn more about Hemoglobin A1c (HbA1c) test refer: https://brainly.com/question/27186330

#SPJ11

The mole ratio of calcium ions to EDTA molecules is 1:1.

EDTA (ethylene diamine tetraacetic acid) is a molecule composed of two nitrogen atoms, two oxygen atoms, four acetate (CH₃COO⁻) groups, and two ethylene (CH₂CH₂) groups.

It binds to cations, particularly divalent cations like calcium ions (Ca2+). Each EDTA molecule binds to one calcium ion, forming an octahedral complex.

The process of binding is a result of the EDTA molecule's geometry and the ionic nature of the calcium cation.

The four acetate groups of EDTA are arranged in a square planar structure, while the two nitrogen atoms and the two ethylene groups form a loop on the upper side of the molecule.

When the EDTA molecule is exposed to calcium ions in an aqueous solution, the calcium cation binds to the nitrogen atoms and the ethylene groups, forming a six-membered ring.

This complex is referred to as an EDTA–Ca2+ octahedral complex.

The 1:1 mole ratio of EDTA and calcium ions is important for understanding the chemistry of EDTA, as well as for applications such as buffering and sequestering.

Buffering solutions help maintain a stable pH level, and sequestering solutions are used to bind and remove metal ions from a solution. The 1:1 ratio of EDTA to calcium ions is essential for both of these applications.

The mole ratio of calcium ions to EDTA molecules is 1:1. This ratio is necessary for understanding the chemistry of EDTA, as well as for applications such as buffering and sequestering.

to know more about mole ratio refer here:

https://brainly.com/question/15288923#

#SPJ11

The molar mass of the albumin can be calculated by dividing the number of moles (1.08 g) by the molarity (0.0216 mol/L), which yields a molar mass of 49.54 g/mol.

The molar mass of the albumin can be calculated using the given data. First, calculate the molarity of the solution. Molarity = Number of moles/Volume of solution = 1.08 g/50 mL = 0.0216 mol/L.

The osmotic pressure of the solution can be calculated using the Van’t Hoff equation,

which states that osmotic pressure is equal to the molarity multiplied by the universal gas constant (R) multiplied by the temperature (T).

Therefore, osmotic pressure = 0.0216 mol/L × 8.3145 L.atm/mol.K × 298 K = 5.85 mmHg.

The molar mass of the albumin, rearrange the osmotic pressure equation to solve for molarity, molarity = osmotic pressure/RT = 5.85 mmHg/(8.3145 L.atm/mol.K × 298 K) = 0.0216 mol/L.

The molar mass of the albumin can be calculated by dividing the number of moles (1.08 g) by the molarity (0.0216 mol/L), which yields a molar mass of 49.54 g/mol.

The molar mass of the albumin can be calculated by first calculating the molarity of the solution, which is equal to the number of moles divided by the volume of the solution.

The osmotic pressure of the solution can then be calculated using the Van't Hoff equation, which states that osmotic pressure is equal to the molarity multiplied by the universal gas constant and the temperature.

The molar mass of the albumin can then be calculated by rearranging the osmotic pressure equation to solve for molarity and then dividing the number of moles by the molarity. This yields a molar mass of 49.54 g/mol.

to know more about albumin refer here:

https://brainly.com/question/18882874#

#SPJ11

The required volume of 0.0500 M sodium hydroxide that should be added to 250 ml of 0.100 M HCOOH to obtain a solution with a pH of 4.50 is: 10.5 ml.

To solve this problem, we can use the equation for the reaction between HCOOH and NaOH. The balanced chemical equation is:  HCOOH + NaOH → HCOONa + H₂O

From this, we can see that one mole of HCOOH reacts with one mole of NaOH to form one mole of HCOONa and one mole of water. We can also write the equation for the ionization of HCOOH: HCOOH + H₂O ⇌ H₃O+ + HCOO-

At pH = 4.50, the concentration of hydronium ions is 3.16 x 10⁻⁵ M. Using this value, we can solve for the concentration of formate ions:

[H₃O+] = [HCOO-]Ka = [H₃O+][HCOO-]/[HCOOH]

Substituting the values gives: Ka = (3.16 x 10⁻⁵)2 / (0.100 - x)x = 0.00227 M

where x is the amount of HCOOH that reacts with NaOH.

Substituting the values gives:

(0.00227)(V1) = (0.100)(0.250 - x)V1 = (0.100)(0.250 - x) / 0.00227V1 = 10.5 - 4.63x

The pH of the solution is given as 4.50. This means that the concentration of hydronium ions is 3.16 x 10⁻⁵5 M. Using this value, we can solve for the concentration of formate ions:

[H₃O+] = [HCOO-]Ka = [H₃O+][HCOO-]/[HCOOH]

Since one mole of HCOOH reacts with one mole of NaOH, the amount of NaOH that is required to react with x moles of HCOOH is also x moles. Therefore, the concentration of NaOH that is required is also 0.00227 M. The volume of NaOH that is required can be calculated using the following equation: M1V1 = M2V2

where M1 is the concentration of NaOH, V1 is the volume of NaOH, M2 is the concentration of HCOOH, and V2 is the volume of HCOOH.

Substituting the values gives[tex](0.00227)(V1) = (0.100)(0.250 - x)V1 = (0.100)(0.250 - x) / 0.00227V1 = 10.5 - 4.63x[/tex]

Since x = 0.00227 M, V1 can be calculated as: [tex]V1 = 10.5 - (4.63)(0.00227) = 10.5 - 0.0105 = 10.5 mL[/tex]

Therefore, the volume of 0.0500 M sodium hydroxide that should be added to 250 mL of 0.100 M HCOOH to obtain a solution with a pH of 4.50 is 10.5 mL.

To know more about sodium hydroxide refer here:

https://brainly.com/question/29327783#

#SPJ11

Answer: The percentage of water in the solution would be 95%.

Explanation:

The percent composition of a solution refers to the amount of each component in the solution as a percentage of the total solution. In this case, if the percent of solute in the solution is 5%, then the remaining percentage must be the percent of water in the solution.

Since the total percent composition of the solution must add up to 100%, we can find the percent of water in the solution by subtracting the percent of solute from 100%.

% Water = 100% - % Solute

% Water = 100% - 5%

% Water = 95%

Therefore, the percentage of water in the solution is 95%.

The mass of Cu(OH)2 produced from 3.5 mol NaOH is 170.4 g.

What is mass?

The balanced chemical equation for the reaction between NaOH and CuSO4 is:

NaOH + CuSO4 -> Cu(OH)2 + Na2SO4

From the equation, we can see that 2 moles of NaOH react with 1 mole of CuSO4 to produce 1 mole of Cu(OH)2.

Therefore, to calculate the moles of Cu(OH)2 produced from 3.5 moles of NaOH, we need to use stoichiometry:

3.5 mol NaOH x (1 mol Cu(OH)2 / 2 mol NaOH) = 1.75 mol Cu(OH)2

Now, we can calculate the mass of Cu(OH)2 produced using its molar mass:

1.75 mol Cu(OH)2 x 97.56 g/mol = 170.4 g Cu(OH)2

Therefore, the mass of Cu(OH)2 produced from 3.5 mol NaOH is 170.4 g.

To know more about mass, visit:

https://brainly.com/question/28180102

#SPJ1

Complete question is: The mass of Cu(OH)2 produced from 3.5 mol NaOH is 170.4 g.

The reaction will proceed 3 times faster than it did at 357 k at a temperature of 828 K.

The Arrhenius equation describes the effect of temperature on reaction rate. It is given by:

k = Ae^(-Ea/RT)

where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.

Rearranging this equation, we have ln(k) = ln(A) - (Ea/RT).

A certain reaction has an activation energy of 34.34 kJ/mol. At 357 K, the rate constant for the reaction is k1. When the reaction is 3 times faster, the rate constant will be 3k1.

Substituting these values in the Arrhenius equation, we have:

ln(3k1) = ln(A) - (34.34 kJ/mol)/(R*T)

ln(k1) = ln(A) - (34.34 kJ/mol)/(R*357 K)

Subtracting these two equations, we obtain:

ln(3) = (34.34 kJ/mol)/(R*k1*T)

Solving for T, we have:

T = (34.34 kJ/mol)/(R*k1*ln(3))

Putting the given values, we get:

T = (34.34 kJ/mol)/(8.314 J/K*mol*3.00*ln(3))

T = 828 K

Therefore, the reaction will proceed 3.00 times faster at 828 K compared to 357 K.

Learn more about Arrhenius equation here: https://brainly.com/question/13467424.

#SPJ11

89.25 mL of 0.100 M NaCl would be required.

Moles of NaCl in the final solution= (150.0 mL) (0.0595 M NaCl) = 8.925 mmol NaCl

We'll have to use the given 0.100 M NaCl and use its concentration to calculate the amount required to make 8.925 mmol NaCl.

The concentration of NaCl in moles per milliliter is as follows:

The concentration of NaCl in moles per mL = 0.100 M NaCl / 1000 mL/L = 0.0001 moles/mL NaCl

The volume of 0.100 M NaCl that contains 8.925 mmol NaCl is calculated as follows:

The volume of 0.100 M NaCl = (8.925 mmol NaCl) / (0.0001 mol/mL) = 89.25 mL

Therefore, 89.25 mL of 0.100 M NaCl is required to make 0.0595 M NaCl solution when diluted to 150.0 mL with water.

To learn more about solutions refer - https://brainly.com/question/29522675

#SPJ11

The two important quantities for [Fe(NCS)2]2- are its charge, which is -2, and its coordination number, which is 4.

Fe(NCS)22- is a coordination complex with a central iron (II) cation that is surrounded by four water molecules and four bidentate NCS– ligands. It is a red-colored complex that is commonly used to evaluate ligand reactivity and to provide an understanding of the mechanisms of substitution reactions. It is formed by the reaction of FeSO4 with NaSCN in water. The formula for Fe(NCS)22- is Fe(H2O)4(NCS)22-.

The crystal field splitting energy is a measure of the energy difference between the lower and upper d-orbitals of an octahedral complex. This energy is determined by the electronic field that is created by the ligands surrounding the central metal ion. The crystal field splitting energy is an important quantity because it affects the optical and magnetic properties of a coordination complex.

Read more about the complex :

https://brainly.com/question/28007375

#SPJ11

At 0.045 m of I2 and a given temperature, after 5.12 s of reaction, a certain amount of I2 will remain, the amount of I2 remaining, it is important to consider the rate of reaction of the: iodine atoms.

Assuming that the iodine atoms do not recombine to form I2, we can use the formula:

[tex]m(t) = m(0) x e^(-kt),[/tex]

where m(t) is the mass of I2 remaining after time t, m(0) is the initial mass of I2, k is the rate constant, and t is the time.

Therefore, the mass of I2 remaining after 5.12 s is [tex]0.045 m x e^(-k x 5.12 s).[/tex]

To solve for the rate constant k, we can use the equation

[tex]k = -ln(m(t)/m(0)) / t,[/tex]

where m(t) is the final mass of I2 and m(0) is the initial mass of I2.

Therefore, the rate constant for the reaction is [tex]-ln(m(5.12s)/m(0)) / 5.12s[/tex]. With this rate constant, the amount of I2 remaining after 5.12 s can be calculated by plugging it into the first equation, [tex]m(t) = m(0) x e^(-kt).[/tex]

To know more about iodine atoms refer here:

https://brainly.com/question/14077853#

#SPJ11

Total mass = number of pennies x mass per penny

Given that you have 125 pennies, and the average penny has a mass of 2.50 g, we can plug in these values to get:

Total mass = 125 x 2.50 g

Total mass = 312.50 g

Therefore, the total mass of the pennies is 312.50 grams.

It is about to vaporize does not describe the saturated liquid if heat is added to it. Here option B is the correct answer.

A saturated liquid is a liquid that is in equilibrium with its vapor at a given temperature and pressure. If heat is added to a saturated liquid, its temperature will increase while its pressure remains constant until it reaches the saturation temperature. At this point, the saturated liquid will start to vaporize or boil, and the temperature will remain constant until all of the liquid has been converted to vapor.

Option A - "it's about to condense" - is true for a saturated vapor if heat is removed from it. Option C - "it refers to a point on a t-v diagram" - is also true since a saturated liquid corresponds to a point on the liquid-vapor saturation line on a temperature-volume (t-v) diagram.

Option D - "it's still considered a liquid" - is true since the saturated liquid is still in the liquid state even though it is about to vaporize. Option E - "any heat added will cause some of the liquid to vaporize" - is true since any additional heat added to a saturated liquid will cause it to vaporize or boil at a constant temperature and pressure.

To learn more about saturated liquid

https://brainly.com/question/17164330

#SPJ4

Complete question:

Which of the following statement does not describe the saturated liquid if heat is added to it? multiple choice questions.

A - it's about to condense.

B - it is about to vaporize.

C - it refers to a point on a t-v diagram.

D - it's still considered a liquid.

E - any heat added will cause some of the liquid to vaporize.