Draw arrows for all of the attractive and repulsive forces between the negatively charged electrons and positively charged protons in these atoms. Make sure your arrows clearly show the difference between attractive and repulsive forces. Note that the particles without a charge label are neutral.
Answer:
Attraction
(e-) ---> <--- (H+)
Repulsion:
<---(e-) (e-)-->
Neutral:
(e-) (Helium)
Explanation:
Accordingly to coulomb's law:
In the attraction, the hydrogen without an electron has a positive charge and needs to be fulfilled with a negative charge found in an eletron.
In the repulsion, both electrons has the same charge and repulse each other.
In the neutral case, the Helium is highly stable therefore the electron is not attracted.
The density of zinc is 7.13 g/mL. What would be the volume of a 300.0 g sample of this metal?
Answer:
The answer is 42.08 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass of metal = 300 g
density = 7.13 g/mL
We have
[tex]volume = \frac{300}{7.13} \\ = 42.07573632...[/tex]
We have the final answer as
42.08 mLHope this helps you
I'm not sure which category this is. But please help me on this!!
Two piles of heavy boxes must be lifted onto a shelf. Each pile has 20 boxes and each box is the same size and weight. Tom and Claudia are each responsible for a pile. Tom lifts each box straight up from the pile to the shelf. Claudia places a long, gradual ramp that leads from the pile to the shelf. She pushes each box up the ramp until it rests on the shelf.
(Tom used more force.)
Compare the distance each person moved each box. Who moved the boxes a longer distance?
Answer:
Tom
Explanation:
Simply because we see Claudia used a shortcut. Tom uses more physical force than Claudia, since Claudia only had to push the boxes into there required shelves.
You have a graduated cylinder with 10 mL of water in it.
You add 300 g of lead weights, and the volume of the
water rises to 40 mL. What is the density of the lead?
Answer:
The answer is 10 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 300 g
volume = final volume of water - initial volume of water
volume = 40 - 10 = 30 mL
We have
[tex]density = \frac{300}{30} = \frac{30}{3} \\ [/tex]
We have the final answer as
10 g/mLHope this helps you
Which of the following is a result of intermolecular forces
A. Hydrogen bonds
B. Electronegativity
C. Double bonds
D. Covalent bonds
which two is it if u get it correct u get brainlist
Answer:
The answer is D and B
Explanation:
It is a quanity because it is because it is being measured in terms of numerical information.
Its is also continuous beause it does not show random change in the mathmatics, it it a slow yet constant change of measurement.
What is the term called ¨I nutted
Answer:
it mean i cumed
Explanation:
a drop of water has a volume of about 0.05 mL. How many molecules of water are in a drop of water?
Answer:
20 drops
Explanation:
the neuron of the basic unit of structure and _____of the nervous system
I NEED THIS ASAP
thank you
Answer:
with out answer choices i will assume dendrites
Explanation:
What is the chemical formula for the limiting reactant in the reaction shown? Write the balanced chemical equation for the reaction, using lowest whole-number coefficients.
1. What is the chemical formula for the limiting reactant in the reaction shown?
Answer: NO
2. Write the balanced chemical equation for the reaction, using lowest whole-number coefficients.
Answer: 2NO + 2H2 —-> 2H2O + N2
Taking into account the definition of limiting reagent and balanced reaction, you get:
NO is the limiting reagent.The balanced reaction is 2 NO + 2 H₂ → 2 H₂O + 1 N₂What is the chemical formula for the limiting reactant in the reaction shown?The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
The reagent in excess will be the one that is not completely exhausted during the reaction, that is, they are those that are partially consumed, "excess" amount of that reagent. This is because the amount of product obtained from the reaction will always depend on the amount of limiting reagent in the reaction.
In this case, you can see that you have two reactants: NO and H₂. Having 4 moles of NO and 5 moles of H₂, you can see that no moles of NO are present in the products, but there is 1 mole of H₂.
This indicates that NO is the limiting reagent, since it is completely consumed, while there is 1 mole of H₂ in excess.
In summary, NO is the limiting reagent.
Write the balanced chemical equation for the reaction, using lowest whole-number coefficients.Taking into account that the reagents are in stoichiometric proportions when the reagents are combined with each other without any of them, you can observe that the chemical equation is:
4 NO + 4 H₂ → 4 H₂O + 2 N₂
Dividing by 2 to get the lowest whole-number coefficients, the balanced chemical reaction is:
2 NO + 2 H₂ → 2 H₂O + 1 N₂
Learn more:
https://brainly.com/question/15235721Which surface will most likely cause a rolling ball to slow down?A.grassB.iceC.tile
Answer:
grass
Explanation:
ice and tile are smooth and without any bumps or large ridges, unlike grass which is spiky and flexible. grass will most likely slow down a ball that is rolling, unlike answer choices B and C.
Answer:
grass
Explanation:
ice and tile are bothe a flat surface where grass has texture
what is a group that does not change and represents a normal pattern of response
Answer:
Constant
Explanation:
Trust
What happens to the pressure if the gas volume is cut in half while n and I are
held constant?
Answer: You can use Boyle's law, which states that pressure is inversely related to volume when other variables are held constant. If the final pressure of a gas is half of the initial, the volume must double if temperature is to remain the same.
Explanation:
Use the information below to explain why the atomic radius decreases down a group.
Answer:
Detail is given below
Explanation:
Atomic radii trend along group:
As we move down the group atomic radii increased with increase of atomic number. The addition of electron in next level cause the atomic radii to increased. The hold of nucleus on valance shell become weaker because of shielding of electrons thus size of atom increased.
As the size of atom increases the ionization energy from top to bottom also decreases because it becomes easier to remove the electron because of less nuclear attraction and as more electrons are added the outer electrons becomes more shielded and away from nucleus.
In A we can see that there is one positive charge and force of attraction is 2.30×10⁻⁸ N and distance is 0.10 nm
In B we can see that negative charge is further away from nucleus because of greater distance thus force of attraction will be less. 0.58×10⁻⁸ N
In C this distance further increases and force also goes in decreasing 0.26×10⁻⁸ N.
explain all ways your atom and symbol for it would change if you removed 2 electrons from the atom
Each atom/element has an electron configuration
The electron configuration shows the energy level of the electron
Each electron configuration has 4 quantum numbers, namely n, l, ml, and ms
n = the principall = the angular momentum / azimuthal ml = the magnetic ms = the electron-spinWe make an example of the element Mg which is in group 2 with the atomic number 12
Electron configuration of Mg: [Ne] 3s² or 1s² 2s² 2p⁶ 3s²
if Mg removes 2 electrons then Mg will form a positive ion (cation) Mg²⁺
This cation is included in the monatomic ion because it is formed from one element (in contrast to the polyatomic ion, which is formed from two or more elements such as SO₄²⁻, ClO₃⁻)
Electron configuration of Mg²⁺ : 1s² 2s² 2p⁶
So atoms can be positively or negatively charged depending on removing or attracting electrons
What is the relationship between the number of particles and the overall pressure?
When the volume of the gas is decreased, do the gas particles get smaller?
Yes or No?
Answer:
The volume of a given amount of gas is inversely proportional to its pressure when temperature is held constant (Boyle's law). Under the same conditions of temperature and pressure, equal volumes of all gases contain the same number of molecules
Explanation:
What is NOT an example of evidence of a super continent?
Question 5 options:
Fossil Record
Continuous Chain
Ocean Currents
Climate
A supercontinent is a landmass that consists of an aggregate mass of entire earth lithospheric landmasses. Pangaea was the last supercontinent that split about 200 million years ago.
The German geologist Alfred Wegener gave numerous pieces of evidence to support his theory of continental drift. These theories include fossil records, glacial chains, coal despites. In some places, he has also mentioned the presence of a similar climate type.Hence the option C is correct.
Learn more about the not an example of evidence of a supercontinent.
brainly.com/question/25322191.
4. A 100.0 mL sample of 0.2516 M aqueous barium chloride was treated with an excess of sulfuric acid. The
resulting barium sulfate precipitate was filtered, dried, and found to have a mass of 4.9852 g. Compute the
percentage yield of barium sulfate in this process.
0.20dm
2. How many grams of salt, NaCl need to be dissolved in 0.50dm of solution to
make a 0.20moldm solution?
Answer:
I don't no sorry. ਕਿਉੁਂਕਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ ਸਤਿ 478figxigxurRyyv ਸ੍
Is this a compound,mixture or solution? (10 points)
Answer:
it is a compound it is a solution when they say they are ablle to seperate it give out they did not mix it
Explanation:
identify the PowerHouse of a cell
A. Golgi
B. lysosome
C. ribosomes
D. nucleus
E. mitochondrion
F. cytoplasm
G. rough endoplasmic reticulun
H. membrane
What is the darkest layer of soil at the top of the photograph called?
A. Aggregate
B. Subsoil
C. Bedrock
D. Topsoil
Answer: D.)Topsoil
Explanation: Have agriculture
what does gravity cause causes
Answer:
position, speed and acceleration
365,000,000 scientific notation
what is the heat of reaction H2 + 1/3N2 2/3NH3
True or False: An equation is balanced by changing subscripts as needed
True
False
Answer: False
Explanation:
Which statement best explains why heating a liquid affects its viscosity?
O The molecules move faster at higher temperatures and overcome attractions more easily.
O The molecules move faster at higher temperatures, and the attractions between them increase.
O The molecules move slower at higher temperatures and overcome attractions more easily
The molecules move slower at higher temperatures, and the attractions between them decrease.
Answer:
A
Explanation:
took test I'm pretty sure and found respond else where
Answer:
A) The molecules move faster at higher temperatures and overcome attractions more easily.
Explanation:
Edg 2020
Determine what elements are denoted by the following electron configurations:
1s22s22p63s23p4s23d104p65s1
Answer:
Electron Configurations - Solutions
Note: The electron configurations in this worksheet assume that lanthanum (La)
is the first element in the 4f block and that actinium (Ac) is the first element in the
5f block. If your periodic table doesn’t agree with this, your answers for elements
near the f-orbitals may be slightly different.
1) sodium 1s2
2s2
2p6
3s1
2) iron 1s2
2s2
2p6
3s2
3p6
4s2
3d6
3) bromine 1s2
2s2
2p6
3s2
3p6
4s2
3d104p5
4) barium 1s2
2s2
2p6
3s2
3p6
4s2
3d104p6
5s2
4d105p6
6s2
5) neptunium 1s2
2s2
2p6
3s2
3p6
4s2
3d104p6
5s2
4d105p6
6s2
4f145d106p6
7s2
5f5
6) cobalt [Ar] 4s2
3d7
7) silver [Kr] 5s2
4d9
8) tellurium [Kr] 5s2
4d105p4
9) radium [Rn] 7s2
10) lawrencium [Rn] 7s2
5f146d1
11) 1s2
2s2
2p6
3s2
3p4
sulfur
12) 1s2
2s2
2p6
3s2
3p6
4s2
3d104p6
5s1
rubidium
13) [Kr] 5s2
4d105p3
antimony
14) [Xe] 6s2
4f145d6
osmium
15) [Rn] 7s2
5f11 einsteinium
16) 1s2
2s2
2p6
3s2
3p6
4s2
4d104p5 not valid (take a look at “4d”)
17) 1s2
2s2
2p6
3s3
3d5
not valid (3p comes after 3s)
18) [Ra] 7s2
5f8
not valid (radium isn’t a noble gas)
19) [Kr] 5s2
4d105p5 valid
20) [Xe] not valid (an element can’t be its own electron configuration)
hey Google please how what types of elements are crop in P block right with example
Answer:
The elements of groups 13, 14, 15, 16, 17, 18 are called p block elements.examples: boron (B), aluminium (Al), gallium (Ga), indium (In), thallium (Tl),and so on
Explanation:
How do you find the mass number of an isotope?
Answer:
The mass number of an isotope is the total number of protons and neutrons in an atomic nucleus. If you know that a nucleus has 6 protons and 6 neutrons, then its mass number is 12. If the nucleus has 6 protons and 7 neutrons, then its mass number is 13.
Explanation: