The quantity B in the expression for air pressure oscillations 5866.25 rad/s. The units of B are radians per second (rad/s), regardless of the unit chosen for measuring time.
To find the time it takes for 796 air pressure maxima to pass a stationary listener, we need to determine the time period of the wave. The time period (T) of a wave is defined as the inverse of its frequency (f).
Given that the musician plays an A*5 note at 932 Hz, we have:
f = 932 Hz
Using the formula for the time period (T = 1/f), we find:
T = 1/932 s
Now, to calculate the time (Δt) for 796 maxima to pass, we multiply the time period by the number of maxima:
Δt = T * 796
Substituting the value of T, we get:
Δt = (1/932 s) * 796 = 0.854 s
Therefore, the value for Δt, the time it takes for 796 air pressure maxima to pass a stationary listener, is approximately 0.854 s.
Regarding the quantity B in the expression for air pressure oscillations, P(t) = Pmaxcos(Bt), the formula for B is:
B = 2πf
Substituting the value of f, we have:
B = 2π * 932 rad/s
Thus, the value of B is approximately 5866.25 rad/s.
The units of B are radians per second (rad/s), regardless of the unit chosen for measuring time.
Learn more about oscillations at: https://brainly.com/question/12622728
#SPJ11
What is the reasons that called the capacitor is an ideal parallel plate capacitor?
The reasons for calling a capacitor an ideal parallel plate capacitor are: (1) It assumes infinite plate area, resulting in uniform electric field between the plates; (2) It assumes no dielectric or conducting material between the plates, minimizing losses and fringing effects.
An ideal parallel plate capacitor is a theoretical concept used to simplify the analysis of real-world capacitors. It is called "ideal" because it assumes certain conditions that may not be fully achievable in practice. The key reasons for labeling it as an ideal parallel plate capacitor are as follows.
Firstly, it assumes infinite plate area. This assumption implies that the plates are infinitely large, ensuring a uniform electric field between them. In reality, the plates of a capacitor have finite dimensions, leading to non-uniform electric fields near the edges, known as fringing effects. However, by assuming infinite plate area, these edge effects are disregarded, simplifying the analysis.
Secondly, the ideal parallel plate capacitor assumes no dielectric or conducting material between the plates. This assumption eliminates losses due to dielectric absorption or leakage currents, which can occur in real capacitors. In practice, capacitors employ dielectric materials between the plates to enhance capacitance, but these materials may introduce non-ideal characteristics.
While an ideal parallel plate capacitor serves as a useful theoretical model, real-world capacitors deviate from these assumptions. Factors like finite plate area, dielectric properties, and parasitic effects influence the behavior of practical capacitors. Nonetheless, the ideal parallel plate capacitor provides a valuable starting point for understanding the fundamental principles of capacitance and energy storage.
To know more about Capacitors click here:
https://brainly.com/question/31627158
#SPJ11
To simultaneously measure the current in a resistor and the voltage across the resistor, you must place an ammeter in ________ with the resistor and a voltmeter in _________ with the resistor. A) Series, series B) Series, parallel C) Parallel, series D) Parallel, parallel
To simultaneously measure the current in a resistor and the voltage across the resistor, you need to place an ammeter in series with the resistor and a voltmeter in parallel with the resistor.
Ammeters are devices used to measure the current flowing through a circuit. They are connected in series with the component or portion of the circuit for which the current is being measured. Placing the ammeter in series with the resistor allows it to measure the current passing through the resistor accurately.
Voltmeters, on the other hand, are used to measure the voltage across a component or portion of a circuit. They are connected in parallel with the component for which the voltage is being measured. Connecting the voltmeter in parallel with the resistor enables it to measure the voltage across the resistor accurately.
Therefore, the correct answer is:
A) Series, parallel
By placing the ammeter in series with the resistor and the voltmeter in parallel with the resistor, you can measure both the current and voltage simultaneously.
Learn more about ammeter and voltmeter https://brainly.com/question/1511135
#SPJ11
An electromagnetic wave is traveling in the +z-direction. Its electric field vector is given by Ē(x, t) = î 9.00 * 105 N/C cos (230 rad x - 150 rad t). Write the magnetic field vector B(x, t) in the same way. m S
The magnetic field vector B(x, t) associated with the given electric field vector is given by B(x, t) = ĵ (3.93 * [tex]10^{-3}[/tex] T) cos(230 rad x - 150 rad t).
According to electromagnetic wave theory, the electric field vector (Ē) and magnetic field vector (B) in an electromagnetic wave are mutually perpendicular and oscillate in a synchronized manner. The relationship between these vectors is determined by Maxwell's equations.
In this case, the electric field vector is given as Ē(x, t) = î (9.00 * [tex]10^{5}[/tex]N/C) cos(230 rad x - 150 rad t), where î represents the unit vector in the x-direction. To determine the magnetic field vector B(x, t), we can use the relationship between the electric and magnetic fields in an electromagnetic wave.
The magnetic field vector B(x, t) can be written as B(x, t) = (1/c) ĵ (Ē/ω), where ĵ represents the unit vector in the y-direction, c is the speed of light in vacuum, Ē is the electric field vector, and ω is the angular frequency of the wave.
In this case, the angular frequency is given as 150 rad/s. Therefore, the magnetic field vector becomes B(x, t) = ĵ (3.93 * [tex]10^{-3}[/tex] T) cos(230 rad x - 150 rad t), where T represents Tesla as the unit of magnetic field strength.
This expression represents the magnetic field vector associated with the given electric field vector in the electromagnetic wave traveling in the +z-direction.
Learn more about electromagnetic wave here ;
https://brainly.com/question/29774932
#SPJ11
Mercury is a fluid with a density of 13,600 kg/m3. What pressure in Pacals is exerted on an object under 0.76 meters of mercury? (g = 9.8 m/s2, use correct sig figs)
The pressure exerted on an object under 0.76 meters of mercury is approximately 99996 Pa.
The pressure exerted by a fluid at a certain depth can be calculated using the formula P = ρgh, where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the depth.
Given that the density of mercury is 13,600 kg/m^3, the depth is 0.76 meters, and the acceleration due to gravity is 9.8 m/s^2, we can calculate the pressure:
P = (13,600[tex]kg/m^3[/tex]) * (9.8 [tex]m/s^2[/tex]) * (0.76 m) ≈ 99996 Pa.
Therefore, the pressure exerted on the object under 0.76 meters of mercury is approximately 99996 Pa, rounded to the correct number of significant figures.
Learn more about pressure here :
https://brainly.com/question/30673967
#SPJ11
Milan is wearing a life jacket and is being circled by sharks in the ocean and notices that after a wave crest passes by, ten more crests pass in a time of 120s. What is the period of the wave? T: 2
Milan is wearing a life jacket and is being circled by sharks in the ocean, the period of the wave is 12 seconds.
In this scenario, Milan is observing waves in the ocean while wearing a life jacket. Milan notices that after a wave crest passes by, ten more crests pass in a time of 120 seconds.
To determine the period of the wave, we need to consider the number of wave crests that pass by in a given time interval. In this case, Milan observes that ten wave crests pass by in a time of 120 seconds.
The period of a wave is defined as the time it takes for one complete wave cycle to occur. Since Milan observes that ten wave crests pass by in 120 seconds, we can calculate the period of each wave by dividing the total time by the number of wave crests:
Period of each wave = Total time / Number of wave crests
Period of each wave = 120 seconds / 10 = 12 seconds
Therefore, the period of the wave is 12 seconds.
It's important to note that the term "T: 2" mentioned in the question does not have a clear meaning in the given context. The period of the wave is determined as 12 seconds based on the information provided.
Learn more about wave crests here:
https://brainly.com/question/31823225
#SPJ11
A parallel beam of monochromatic light of wavelength passes through a slit of width b. After passing through the slit the light is incident on a distant screen. The angular width of the central maximum is A. 2 radians. B. 승 radians. C. 24 degrees. D. degrees. Hide Markscheme A
The correct answer is A. 2 radians. The standard unit of angular measurement used in many branches of mathematics is the radian, indicated by the symbol rad. It is the unit of angle in the International System of Units.
The angular width of the central maximum in a single-slit diffraction pattern can be calculated using the formula:
θ = λ / b
where θ is the angular width, λ is the wavelength of light, and b is the width of the slit.
In this case, the angular width is given as 2 radians. Since the options are given in different units, we need to convert 2 radians to degrees. Using the conversion factor 180/π, we have:
θ (in degrees) = (2 radians) * (180/π) ≈ 114.6 degrees = 2 radians.
To know more about radians
https://brainly.com/question/27025090
#SPJ11
Recently there has been much interest in the condensed-matter physics community in so-called "Dirac" materials, in which the band structure provides a relativistic dispersion relation ε(k)=ℏv 0
∣k∣. Such a dispersion relation can be realized in monolayer graphene, and several classes of so-called "topological" materials with strong spin-orbit coupling. Most of the time, this "Dirac cone" band occurs only in 2D in the surface states of the material 29. In this problem consider a 2D gas of N spin- 1/2 fermions filling the states of such a material with area A. a) Calculate the chemical potential at T=0,μ F
=μ(T=0), often called the Fermi level. b) Use the Sommerfeld expansion to derive an analytic formula for the chemical potential and the constantarea heat capacity C A
of the system as a function of temperature for finite temperature but still T≪μ F
/k B
. c) Use a computer to calculate the chemical potential and the heat capacity C A
as a function of temperature between T=0 and T=10μ F
/k B
. Plot your results for μ with μ/μ F
on the y-axis and k B
T/μ F
on the x-axis. Plot your results for C A
with C A
/(Nk B
) on the y-axis and k B
T/μ F
on the x-axis. On the high-temperature side compare your results to a calculation using the classical limit ⟨n(ε)⟩≪1 for all ε.
The problem deals with a 2D gas of N spin-1/2 fermions in a material exhibiting a "Dirac cone" band structure. The goal is to calculate the chemical potential at T=0 (μF) and derive an analytic formula for the chemical potential and constant-area heat capacity (CA) as functions of temperature. Additionally, a computer calculation is required to plot the results of μ and CA as functions of temperature between T=0 and T=10μF/kB.
The problem starts by considering a 2D gas of N spin-1/2 fermions in a material with a "Dirac cone" band structure. At T=0, the chemical potential (μF) can be calculated by filling the available states up to the Fermi level. The Sommerfeld expansion can then be utilized to derive an analytic formula for the chemical potential and constant-area heat capacity (CA) as functions of temperature, assuming T≪μF/kB.
This expansion provides a way to express the thermodynamic properties in terms of derivatives of the energy with respect to temperature. By using a computer, the chemical potential and CA can be numerically calculated for a range of temperatures and plotted accordingly. The resulting plots can be compared to the classical limit where ⟨n(ε)⟩≪1 for all ε, on the high-temperature side.
To know more about band structure click here:
https://brainly.com/question/29408323
#SPJ11
The electric field strength between two parallel conducting plates separated by 3.40 cm is 6.10 ✕ 104 V/m.
(a)
What is the potential difference between the plates (in kV)?
kV
(b)
The plate with the lowest potential is taken to be at zero volts. What is the potential (in V) 1.00 cm from that plate (and 2.40 cm from the other)?
V
a. The potential difference between the parallel plates is given byΔV = Ed
The distance between the two plates is given by d = 3.40 cm = 3.40 × 10⁻² m
The electric field strength E is given by
E = 6.10 × 10⁴ V/mΔV =
Ed = 6.10 × 10⁴ V/m × 3.40 × 10⁻² m
= 2.07 × 10³ V2.07 × 10³ V
= 2.07 kV (to three significant figures)
b. At a distance of 1.00 cm from the plate with zero potential and 2.40 cm from the other plate, the electric potential V is given by
V = E × d, where d is the distance from the zero-potential plate
V = E × d
= 6.10 × 10⁴ V/m × 0.0100 m
= 610 V
Therefore, the potential 1.00 cm from the plate with zero potential and 2.40 cm from the other plate is 610 V.
Learn more about zero potential here
https://brainly.com/question/13265624
#SPJ11
A heat engine does 180 JJ of work per cycle while exhausting 610 JJ of heat to the cold reservoir.
Part A: What is the engine's thermal efficiency? Express your answer using two significant figures.
Part B: A Carnot engine with a hot-reservoir temperature of 390 ∘C∘C has the same thermal efficiency. What is the cold-reservoir temperature in ∘C∘C?
Express your answer using two significant figures.
The thermal efficiency of the engine is 23% and the cold reservoir temperature of the carrot engine is approx. 511 °C.
Part A: The thermal efficiency of an engine can be defined as the ratio of work done by the engine to the heat energy supplied to it. It is given as: thermal efficiency = work done by the engine/heat energy supplied to the engine. From the question, work done by the engine = 180 J and heat energy exhausted to the cold reservoir = 610 J. Hence, the thermal efficiency of the engine = work done by the engine/heat energy supplied to the engine= (work done by the engine)/(heat energy supplied - heat energy exhausted to the cold reservoir)= (180 J)/(Q_h - 610 J) ... equation (1)Now, to calculate the value of Q_h, we can use the first law of thermodynamics, which states that the energy supplied to the engine is equal to the sum of work done by the engine and heat energy exhausted to the cold reservoir. Mathematically, it can be represented as: energy supplied to the engine = work done by the engine + heat energy exhausted to the cold reservoir Q_h = work done by the engine + heat energy exhausted to the cold reservoir= 180 J + 610 J= 790 J. Now, substituting this value in equation (1), we get: thermal efficiency = (180 J)/(790 J)= 0.23 or 23% (approx). Hence, the thermal efficiency of the engine is 23% (approx).
Part B: Let T_h and T_c be the hot and cold reservoir temperatures of the Carnot engine, respectively. Then, the thermal efficiency of a Carnot engine is given by: thermal efficiency = (T_h - T_c)/T_h= (T_h/T_h) - (T_c/T_h)= 1 - (T_c/T_h)Since the Carnot engine has the same thermal efficiency as the given engine, we can equate the two expressions and solve for T_c. That is,0.23 = 1 - (T_c/T_h)T_c/T_h = 1 - 0.23 = 0.77T_c = 0.77 × T_h. Now, given that T_h = 390 °C (note that the temperature must be converted to Kelvin), we can calculate the value of T_c as:T_c = 0.77 × T_h= 0.77 × (390 + 273) K= 0.77 × 663 K= 511 K (approx)Thus, the cold-reservoir temperature of the Carnot engine is approximately 511 °C.
Learn more about thermal efficiency:
https://brainly.com/question/24244642
#SPJ11
material and energy balance equations for an unsteady
compressible flow in Cartesian coordinates
In an unsteady compressible flow in Cartesian coordinates, material and energy balance equations are used to describe the conservation of mass and energy within the system. These equations are commonly referred to as the continuity equation and the energy equation, respectively.
Continuity Equation:
The continuity equation for an unsteady compressible flow in Cartesian coordinates can be expressed as:
∂ρ/∂t + ∂(ρu)/∂x + ∂(ρv)/∂y + ∂(ρw)/∂z = 0
where:
ρ is the density of the fluid,
t is the time,
u, v, and w are the components of velocity in the x, y, and z directions, respectively, and
x, y, and z are the Cartesian coordinates.
This equation represents the conservation of mass and states that the rate of change of density within a control volume, together with the divergence of the mass flux in each direction, must sum to zero.
Energy Equation:
The energy equation for an unsteady compressible flow in Cartesian coordinates can be expressed as:
∂(ρe)/∂t + ∂(ρeu)/∂x + ∂(ρev)/∂y + ∂(ρew)/∂z = -∇•(pu) + ∂(τu)/∂x + ∂(τv)/∂y + ∂(τw)/∂z + Q
where:
e is the specific internal energy of the fluid,
p is the pressure,
τ is the stress tensor,
Q is the heat transfer per unit volume,
and other terms have the same meaning as in the continuity equation.
This equation represents the conservation of energy and states that the rate of change of energy within a control volume, together with the work done by pressure forces, heat transfer, and viscous effects, must sum to zero.
These material and energy balance equations provide a mathematical framework for analyzing and predicting the behavior of unsteady compressible flows in Cartesian coordinates. They are essential tools in fields such as fluid dynamics, aerodynamics, and thermodynamics for understanding the flow and energy exchange processes within a system.
Learn more about fluid dynamics here:
https://brainly.com/question/30578986
#SPJ11
Blocks with masses of 3.00 kg, 4.00 kg, and 5.00 kg are lined up in a row. All three are pushed forward by a 6.00 N force applied to the 3.00 kg block. How much force does the 3.00 kg block exert on the 4.00 kg block? Note: Your answer is assumed to be reduced to the highest power possible.
The 3.00 kg block exerts a force of 1.50 N on the 4.00 kg block. When a force is applied to the 3.00 kg block, it creates a reaction force that is transmitted to the other blocks in the row.
According to Newton's third law of motion, the force exerted by the 3.00 kg block on the 4.00 kg block is equal in magnitude and opposite in direction to the force exerted by the 4.00 kg block on the 3.00 kg block.
Since the 3.00 kg block is pushed forward with a force of 6.00 N, it exerts a force of 6.00 N on the 4.00 kg block. However, the question asks for the answer to be reduced to the highest power possible. Therefore, we need to divide the force by the mass of the 4.00 kg block to obtain the answer.
Using the formula F = ma (force equals mass multiplied by acceleration), we can rearrange it to solve for acceleration (a = F/m). Plugging in the values, the force exerted by the 3.00 kg block on the 4.00 kg block is 6.00 N divided by 4.00 kg, resulting in a force of 1.50 N.
Therefore, the 3.00 kg block exerts a force of 1.50 N on the 4.00 kg block.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
A photon with a wavelength of 3.50×10 −13
m strikes a deuteron, splitting it into a proton and a neutron. Calculate the released kinetic energy in the unit of MeV.
The released kinetic energy in the unit of MeV is 12.48 MeV (rounded off to two decimal places).Hence, the required solution.
The given photon strikes a deuteron and splits it into a proton and a neutron. We need to calculate the released kinetic energy in the unit of MeV.Given, wavelength of the photon, λ = 3.50 × 10^-13 mSpeed of light, c = 3 × 10^8 m/sPlanck’s constant, h = 6.63 × 10^-34 J.sThe energy of a photon, E = hc/λThe energy of the photon is calculated as follows:E = hc/λ= (6.63 × 10^-34 J.s × 3 × 10^8 m/s)/ 3.50 × 10^-13 m= 5.68 × 10^-19 J
The above energy of the photon is used to split the deuteron into proton and neutron. As the deuteron is split into two particles, the total mass of the two particles is equal to the mass of the deuteron, m. The mass of the proton is 1.00728 amu, and the mass of the neutron is 1.00866 amu.
Thus, the total mass of the two particles is m = 2.01594 amu. (amu is the atomic mass unit)The mass of 1 amu is 1.66054 × 10^-27 kg.The total mass, m = 2.01594 amu = 2.01594 × 1.66054 × 10^-27 kg = 3.34402 × 10^-27 kgAs the deuteron splits into proton and neutron, there is a decrease in the mass of the particles by an amount Δm.Δm = 2m(1 - mp/m)
Where mp is the mass of the proton and m is the mass of the deuteron.Substituting the values,Δm = 2 × 3.34402 × 10^-27 (1 - 1.00728/2.01594)= 2.22557 × 10^-29 kgThe kinetic energy released in this reaction is given by E = Δmc^2Substituting the values,E = Δmc^2= (2.22557 × 10^-29 kg) × (3 × 10^8 m/s)^2= 2.00301 × 10^-12 JConverting this to MeV,1 eV = 1.602 × 10^-19 J1 MeV = 10^6 eVThus, E = 2.00301 × 10^-12 J= (2.00301 × 10^-12 J)/(1.602 × 10^-19 J/MeV)= 12.48 MeV
The released kinetic energy in the unit of MeV is 12.48 MeV (rounded off to two decimal places).Hence, the required solution.
to know more about kinetic energy
https://brainly.com/question/16983571
#SPJ11
What is the potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute?
The potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute is 3000 volts.
A capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute will have a potential difference of 3000 V between the plates.What is a capacitor?Capacitors are electronic devices that can store an electric charge temporarily. The unit of capacitance is the farad (F). It can be calculated by dividing the charge stored in one plate by the potential difference between the two plates.C=Q/VPotential Difference between plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minuteIn this case, we have to determine the potential difference between the plates of the capacitor.
The energy stored in the capacitor can be computed by the formula:Energy stored in a capacitor E = 1/2CV²Where,C is the capacitanceV is the potential difference between the platesE is the energy stored in the capacitorWe can rearrange the formula to obtain the potential difference between the plates of the capacitor as:V = √(2E/C)Watts is a unit of power. To calculate the energy in watt-hours, we must convert 75.0 W to watt-hours by multiplying by time, which is 1 minute (60 seconds).
Watt-hours = Power x Time = 75.0 x 1/60 = 1.25 WhTo calculate the energy in joules, we need to convert watt-hours to joules.1 Wh = 3.6 x 10^3 J1.25 Wh = 1.25 x 3.6 x 10^3 J = 4.5 x 10^3 JSubstitute the values of capacitance and energy into the formula above to get the potential difference between the plates of the capacitor.V = √(2E/C) = √(2 × 4.5 × 10³ / 3) = 3000 voltsTherefore, the potential difference between the plates of a 3.0-F capacitor that stores sufficient energy to operate a 75.0-W light bulb for one minute is 3000 volts.
Learn more about Energy here,what is the definition of energy
https://brainly.com/question/2003548
#SPJ11
a) A 12-kVA, single-phase distribution transformer is connected to the 2300 V supply with resistances and leakage reactance of R1 = 3.96 2 R₂ = 0.0396 2, X₁= 15.8 2 and X₂ = 0.158 2. The iron loss is 420 W. The secondary voltage is 220 V. - (i) Calculate the equivalent impedance as referred to the high voltage side. (ii) Calculate the efficiency and maximum efficiency at 0.8 power factor. (7 marks) (12 marks) (b) A 3-phase, 4-pole, 50-Hz induction motor run at a speed of 1440 rpm. The total stator loss is 1 kW, and the total friction and winding losses is 2 kW. The power input to the induction motor is 40 kW. Calculate the efficiency of the motor.
(i) The equivalent impedance referred to the high voltage side is calculated as Z_eq = (0.0396 + j0.158) + ((220/2300)^2) * (3.96 + j15.8) Ω.(ii) The efficiency of the transformer can be calculated using η = (V₂ * I₂ * cos(θ)) / (V₁ * I₁), and the maximum efficiency at 0.8 power factor can be found by varying the power factor (θ) and calculating the efficiency for different values.
(i) To calculate the equivalent impedance as referred to the high voltage side, we need to account for the voltage ratio between the primary and secondary side of the transformer.
The equivalent impedance as referred to the high voltage side (Z_eq) can be calculated using the formula:
Z_eq = (Z₂ + (V₂/V₁)^2 * Z₁)
where Z₁ and Z₂ are the impedances on the primary and secondary side, respectively, and V₁ and V₂ are the primary and secondary voltages.
Given:
Z₁ = R₁ + jX₁ = 3.96 + j15.8 Ω
Z₂ = R₂ + jX₂ = 0.0396 + j0.158 Ω
V₁ = 2300 V
V₂ = 220 V
Substituting the values into the formula, we get:
Z_eq = (0.0396 + j0.158) + ((220/2300)^2) * (3.96 + j15.8)
(ii) To calculate the efficiency and maximum efficiency at 0.8 power factor, we need to consider the input and output power of the transformer.
The input power (Pin) can be calculated as:
Pin = VI * cos(θ)
The output power (Pout) can be calculated as:
Pout = VI * cos(θ) - iron loss - copper loss
Efficiency (η) can be calculated as:
η = Pout / Pin
To find the maximum efficiency, we need to vary the power factor (θ) and calculate the efficiency for different values.
(b) To calculate the efficiency of the motor, we need to consider the input power and the losses in the motor.
The input power (Pin) is given as 40 kW.
The total losses in the motor (Ploss) can be calculated as the sum of the stator loss and the friction and winding losses:
Ploss = 1 kW + 2 kW
The output power (Pout) is given by:
Pout = Pin - Ploss
Efficiency (η) can be calculated as:
η = Pout / Pin
Substituting the given values, we can calculate the efficiency of the motor.
To know more about voltage click here:
https://brainly.com/question/32002804
#SPJ11
Kindly give a brief introduction and summation on one of the
female scientist of the Nobel Laureates, highlighting
the bullet points that are most important in their contributions to
science.
One of the female scientists who won the Nobel Laureate is Marie Curie. She was born in Poland in 1867 and died in France in 1934.
Marie Curie was the first woman to win the Nobel Prize in two different fields. She won the Nobel Prize in Physics in 1903 and the Nobel Prize in Chemistry in 1911.Marie Curie's most significant contribution to science was the discovery of radium and polonium, which she achieved alongside her husband, Pierre Curie. They discovered the elements in 1898. Radium and polonium were radioactive elements, and this discovery led to a new branch of physics known as radioactivity.Marie Curie's work was not only groundbreaking in itself, but it also paved the way for future discoveries. Her work on radioactivity led to the development of radiation therapy for cancer patients, and she developed mobile X-ray units to be used in the field during World War I.Marie Curie was an inspiration to many female scientists who came after her. She defied societal expectations and gender barriers to become one of the most prominent scientists of her time. Her work continues to impact the world of science and medicine today. In conclusion, Marie Curie is a trailblazer and a role model for women in science. Her contributions to the field of physics and chemistry have been invaluable and have shaped the direction of scientific research for over a century.
Learn more about science
https://brainly.com/question/12842883
#SPJ11
Marie Curie's contributions to science include the discovery of radioactivity, isolation of radium, development of the theory of radioactivity, pioneering work in radiation therapy, and the distinction of being a two-time Nobel Laureate.
One female scientist who was a Nobel Laureate is Marie Curie. She made significant contributions to science, particularly in the fields of physics and chemistry. Here are some important bullet points highlighting her achievements:
1. Discovery of radioactivity: Curie's most notable contribution was her discovery of radioactivity. She conducted experiments on uranium and discovered that it emitted radiation, leading to the identification of new elements like polonium and radium.
2. Isolation of radium: Curie and her husband, Pierre Curie, successfully isolated radium from uranium ores. This achievement required meticulous work and careful chemical separations.
3. Development of the theory of radioactivity: Curie's research laid the foundation for the theory of radioactivity, which revolutionized our understanding of atomic structure and led to advancements in nuclear physics.
4. Pioneering work in radiation therapy: Curie's discoveries in radioactivity paved the way for the development of radiation therapy as a treatment for cancer. Her groundbreaking work saved countless lives and continues to be used in medical applications today.
5. Nobel Prizes: Marie Curie received two Nobel Prizes, one in Physics (1903) and another in Chemistry (1911), making her the first person, male or female, to be honored with two Nobel Prizes.
Learn more about radioactivity
https://brainly.com/question/1770619
#SPJ11
Carla stands on a train platform while two trains, traveling the same speed (v = 9.0 and sounding whistles of the same frequency, approach from the same direction. After one train passes Carla but before the second train passes her, she hears a beat frequency of 8.5 Hz. What is the frequency of the train whistle? f= Hz
The frequency of the train whistle is 150 Hz.How to find the frequency of the train whistle?Given that two trains, traveling the same speed (v = 9.0 and sounding whistles of the same frequency, approach from the same direction. After one train passes Carla but before the second train passes her, she hears a beat frequency of 8.5 Hz.The beat frequency formula is given by;Beat frequency = (f1 - f2)Here, f1 and f2 are the frequencies of the whistles of the two trains.The velocity of sound in the air is 343 m/s (at 20°C).
The time difference between the whistles heard by Carla can be found using;Δt = d/vHere, d is the distance traveled by the first train after passing Carla and before the second train reaches Carla.As both trains are moving at the same speed v, the distance covered by the first train and second train after hearing the first train can be expressed as;Distance covered by first train (d1) = v * ΔtDistance covered by second train (d2) = 2 * d1Total distance traveled by the second train after the first train passed Carla = d1 + d2.
The total distance traveled by the second train can also be written as;Total distance traveled by the second train = λbeatWhere λbeat is the wavelength of the beat frequency.The frequency of the beat frequency is given as 8.5 Hz.So the wavelength of the beat frequency is;λbeat = v/ fbeat = 343/8.5 = 40.35 mNow, distance traveled by the first train can be found as;d1 = v * Δt = v * λbeat/2 = 151.575 mTotal distance traveled by the second train can be found as;d1 + d2 = 2 * d1 = 303.15 mThe total distance traveled by the second train is equal to the distance of one wavelength of the beat frequency plus the distance traveled by the first train. Since both trains travel at the same speed, this distance is also equal to one wavelength of the sound waves emitted by the train whistle.So, λtrain = 303.15 m.
The frequency of the train whistle is;f = v/λtrain= 9/λtrain= 9/303.15= 0.02965 HzFrequency in Hz = 0.02965 * 5000= 150 HzTherefore, the frequency of the train whistle is 150 Hz.
Learn more on frequency here:
brainly.in/question/39348621
#SPJ11
answer the question please with full steps
3. Determine Vn, Vout, and lout, assuming that the op amp is ideal. 1V 4ΚΩ w O 1.5mA 6k02 ww +5V -5V 3ΚΩ www 6V V₁ 3V 40+1₁ ww/... Vout 1kQ2
The Vn = 1V, Vout = 0.5V and Iout = -2.17mA (upwards towards V₁) .
Assuming the op amp is ideal. The circuit diagram is shown below: [tex]Circuit Diagram[/tex].We know that, the voltage at the inverting terminal of the op-amp (Vn) is equal to the voltage at the non-inverting terminal of the op-amp (Vp). So, Vn = VpLet's find Vp, Vp = Vin = 1V (Since there is no voltage drop across the resistor of 4kΩ)Therefore, Vn = Vp = 1V. Next, let's find the value of Vout. Vout can be obtained using the following formula: Vout = (Vn - Vf) * (R2/R1)Vf = 0, since the feedback resistor is connected directly from the output to the inverting input. Hence, Vf = 0Vout = (Vn - Vf) * (R2/R1) Vout = Vn * (R2/R1)Vout = 1 * (1kΩ/2kΩ) = 0.5V. Finally, let's find the value of Iout. Using KCL at node 2,I₂ = Iout + I₁I₁ = 1.5mAI₂ = (Vn - V₂)/R₂ = (1 - 3)/3kΩ = -0.67mA. Therefore, Iout = I₂ - I₁ ⇒Iout = -0.67mA - 1.5mA = -2.17mAA negative value of Iout indicates that the current is flowing in the opposite direction of the arrow shown in the circuit diagram. Therefore, the direction of the current is upwards towards V₁. The value of Iout is 2.17mA.
Hence, the final answers are, Vn = 1V,Vout = 0.5V and Iout = -2.17mA (upwards towards V₁).
Let's learn more about op amp:
https://brainly.com/question/30890598
#SPJ11
A hunter spots a duck flying a given distance, h, above the ground (in meters) and shoots at it with his shotgun. The buckshot leaves the shotgun at an angle equal to 45.1 degrees from the horizontal with a velocity of 103 m/s. The duck is flying at a speed of 30 m/s in a horizontal direction toward the hunter. If the hunter shot when the duck was 200 meters away from the hunter and hit the duck, how high was the duck flying?
Given data:
Distance between duck and hunter, s = 200 m
Velocity of the bullet, u = 103 m/s
Velocity of the duck, v = 30 m/s
Angle made by the gun from horizontal, θ = 45.1°
We have to find the height at which the duck was flying,
h.
Let's begin with calculating the time taken by the bullet to reach the duck using the horizontal component of the velocity of the bullet. Distance covered by the bullet, S = vt
Where, t is the time taken to reach the duck.
The distance covered by the duck is also s = vt.
It implies that the time taken by the bullet and the duck to reach the point of collision is the same.
Therefore,
t = s/v = 200/30 = 6.67 s
Now, using the vertical component of velocity of the bullet, we can calculate the height at which the duck was flying.
u = v₀ + gtv₀ = usinθ
where g = 9.8 m/s², and v₀ is the initial vertical component of velocity of the bullet.
v₀ = u sin θ = 103 × sin 45.1°
= 73.09 m/s
Now, the height of the duck, h = v₀t + (1/2)gt²h
= (73.09 × 6.67) + (1/2) × 9.8 × (6.67)²
= 487.67 + 223.18
= 710.85 m
Therefore, the duck was flying at a height of 710.85 meters above the ground.
Learn more about The horizontal and vertical components here
https://brainly.com/question/24681896
#SPJ11
A 22.0 kg child is riding a playground merry-go-round that is rotating at 40.0 rev/min. What net centripetal force must she exert to stay on if she is 1.64 m from its center? (Hint: it's more than double her weight). Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23,-2, 106, 5.23e-8 Enter answer here
A 22.0 kg child is riding a playground merry-go-round that is rotating at 40.0 rev/min. The net centripetal force the child must exert to stay on the merry-go-round is 603.56 N.
The centripetal force is the radial force responsible for keeping an object in circular motion
To find the net centripetal force the child must exert to stay on the merry-go-round, we can use the formula for centripetal force:
F = m * ω^2 * r
where F is the centripetal force, m is the mass of the child, ω is the angular velocity in radians per second, and r is the distance from the center of rotation.
First, we need to convert the angular velocity from rev/min to radians per second.
There are 2π radians in one revolution, and 60 seconds in one minute:
ω = (40.0 rev/min) * (2π rad/rev) * (1 min/60 s) = 4.1888 rad/s
Now we can calculate the centripetal force:
F = (22.0 kg) * (4.1888 rad/s)^2 * (1.64 m) = 603.56 N
Therefore, the net centripetal force the child must exert to stay on the merry-go-round is 603.56 N.
Learn more about centripetal force here:
https://brainly.com/question/14021112
#SPJ11
5. Two stones are dropped from the top of a bridge with height h. One stone has mass m₁ and the second stone has mass m₂=4*m₁. Let K₁ be the kinetic energy of the first stone and K₂ be the kinetic energy of the second stone when the stones hit the ground. Let v₁ be the velocity of the first stone and v₂ be the velocity of the second stone when the stones hit the ground. Which of the following is true about the kinetic energies and velocities of the two stones as they hit the ground? a. K₂=K₁, and v₂=V₁ b. K₂=4*K₁, and v₂=2*V₁ c. K₂=2*K₁, and v₂=4v₁ d. K₂=4*K₁, and v₂=V₁ 6. Which of the following statements is true for an isolated system in which there are nonconservative forces, such as friction, acting? a. The kinetic energy decreases, so the total energy of the system decreases b. Some energy is lost to the environment in the form of heat and mechanical waves c. Some energy is transferred into the internal energy of the system d. The system heats up, so the total energy of the system increases
When two stones of masses m₁ and m₂ are dropped from the same height, the gravitational potential energy they lose is converted into kinetic energy. The correct statement is: b. Some energy is lost to the environment in the form of heat and mechanical waves.
Since the stones are dropped from the same height, they have the same potential energy, which is converted entirely into kinetic energy when they hit the ground. The kinetic energy (K) of an object is given by the equation K = (1/2)mv², where m is the mass and v is the velocity.
Considering that m₂ = 4m₁, the kinetic energy of the second stone (K₂) will be four times the kinetic energy of the first stone (K₁), as the kinetic energy is directly proportional to the mass.
However, the velocities (v) of the stones will not necessarily be the same. The velocity depends on various factors such as the mass, height, and any other forces acting on the stones.
Therefore, the correct statement is:
b. K₂ = 4K₁, and v₂ ≠ 2v₁
For the second question:
When an isolated system has non conservative forces such as friction acting, some energy is lost to the environment in the form of heat and mechanical waves.
The total energy of an isolated system remains constant, but within the system, the energy may be transferred or transformed. In the presence of non conservative forces, such as friction, some of the mechanical energy is converted into other forms, such as heat or sound.
Therefore, the correct statement is: b. Some energy is lost to the environment in the form of heat and mechanical waves.
Learn more about mechanical waves here:
https://brainly.com/question/31180289
#SPJ11
Analyze the operating principles and applications for any ONE (1) of the turbines listed below with appropriate sketches or diagrams: [Analisakan prinsip dan aplikasi operasi untuk mana-mana SATU (1) daripada turbin yang disenaraikan dihawah dengan lakaran atau gambar rajah yang sesuai:] (i) Kaplan turbine. [Turbin Kaplan.] (ii) Francis turbine. [Turbin Francis.] (iii) Pelton turbine. [Turbin Pelton.] (4 Marks/ Markah)
Operating Principles: The Francis turbine is a type of reaction turbine used for converting the energy of flowing water into mechanical energy. It is specifically designed to operate with medium to high head and medium flow rates.
The key operating principles of the Francis turbine include:
1. Water Inlet: The water enters the turbine through a spiral-shaped casing known as the scroll case or volute. The scroll case gradually distributes the water uniformly around the circumference of the runner.
2. Runner: The runner consists of a set of curved blades or vanes that are fixed to a central hub. These blades are designed to efficiently harness the kinetic energy of the water and convert it into rotational mechanical energy.
3. Guide Vanes: The guide vanes are adjustable blades located in the casing just before the water enters the runner. They control the flow of water and direct it onto the runner blades at the desired angle, optimizing the turbine's performance.
4. Water Flow and Pressure: As the water passes through the runner blades, it undergoes a change in direction, creating a pressure difference across the blades. The pressure difference generates a force on the blades, causing them to rotate.
5. Shaft and Generator: The rotational motion of the runner is transmitted to a shaft connected to a generator. The generator converts the mechanical energy into electrical energy, which can be used for various applications.
Applications:
1.The Francis turbine is widely used in hydroelectric power plants due to its versatility and efficiency. It is suitable for both high head and medium head applications. Here are some of its applications:
2. Hydroelectric Power Generation: Francis turbines are commonly used in hydroelectric power plants to generate electricity. They are ideal for sites where the head of water is between 10 and 600 meters, and the flow rate is moderate.
3. Irrigation Systems: The Francis turbine can be employed in irrigation systems to drive pumps or lift water from a lower level to a higher level. It can efficiently harness the energy from water sources such as rivers, canals, or reservoirs.
4 .Pumped Storage Systems: In pumped storage power plants, excess electricity is used to pump water from a lower reservoir to an upper reservoir during periods of low demand. The Francis turbine is then used in reverse as a pump to release the stored water, generating electricity during peak demand periods.
5. Industrial Applications: Francis turbines can also be used in various industrial applications that require mechanical energy, such as powering large fans, compressors, or mills.
Overall, the Francis turbine is a versatile and efficient device used for converting the energy of flowing water into mechanical energy. Its adaptability to different head and flow conditions makes it a preferred choice for hydroelectric power generation and other water-driven applications.
To know more about Turbines visit:
https://brainly.com/question/11966219
#SPJ11
The energy gap for silicon is 1.11eV at room temperature. Calculate the longest wavelength of a photon to excite the electron to the conducting band.
The longest wavelength of a photon to excite the electron to the conducting band is 1240 nm.
The energy gap for silicon is 1.11 eV at room temperature. To determine the longest wavelength of a photon to excite the electron to the conducting band, we can use the formula:E = hc/λwhere E is the energy of the photon, h is the Planck constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the photon.
To excite an electron to the conduction band, the photon must have an energy of at least 1.11 eV. Therefore, we can write:E = 1.11 eV = 1.11 x 1.6 x 10^-19 J= 1.776 x 10^-19 J.
Substituting the values of h and c into the equation:E = hc/λλ = hc/ELet us solve for the wavelength:λ = hc/ELongest wavelength will correspond to the smallest energy of a photon, which would give a wavelength corresponding to the energy gap.λ = hc/E = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s)/(1.776 x 10^-19 J) = 1.24 x 10^-6 m or 1240 nm.
Therefore, the longest wavelength of a photon to excite the electron to the conducting band is 1240 nm.
Learn more about wavelength here,
https://brainly.com/question/10750459
#SPJ11
2.Two currents 5 - j2 amperes and 3 - j 2 amperes enter a
junction. What is the outgoing currents given voltage 220 V ac
source at 60 hertz frequency.
please help. thanks
The outgoing current from the junction can be calculated by summing the incoming currents. In this case, the outgoing current would be 8 - j4 amperes.
To calculate the outgoing current from the junction, we need to add the two incoming currents. Given that one current is 5 - j2 amperes and the other is 3 - j2 amperes, we can simply add the real and imaginary components separately.
For the real component, we add 5 and 3, resulting in 8 amperes. For the imaginary component, we add -j2 and -j2, which gives us -j4 amperes.
Thus, the outgoing current from the junction is 8 - j4 amperes. This means that the current leaving the junction has a real component of 8 amperes and an imaginary component of -4 amperes. The direction and phase of the current would depend on the specific circuit configuration and the voltage source.
To know more about outgoing current click here:
https://brainly.com/question/17198579
#SPJ11
An electromagnetic wave in the visible spectrum has a wavelength of 675 nm and a frequency of 5.0×10 15
Hz
4.4×10 14
Hz
4.4×10 6
Hz
1.2×10 5
Hz
1.2×10 14
Hz
The only valid representation of an electromagnetic wave in the visible spectrum among the given options is a wavelength of 675 nm and a frequency of 4.4×10^14 Hz. So, the correct answer is 4.4×10^14 Hz.
1. A wavelength of 675 nm and a frequency of 5.0×10^15 Hz:
This combination is not valid because the speed of light is approximately 3.0×10^8 m/s, which is a constant in a vacuum. If we calculate the speed of light using the equation v = λf, where v is the speed of light, λ is the wavelength, and f is the frequency, we get a speed of light much higher than the actual value. Therefore, this option is incorrect.
2. A wavelength of 675 nm and a frequency of 4.4×10^14 Hz:
This combination is valid and falls within the visible spectrum. The given wavelength corresponds to a color between red and orange. The frequency represents the number of oscillations per second for the electromagnetic wave. Therefore, this option is a valid representation of an electromagnetic wave in the visible spectrum.
3. A wavelength of 675 nm and a frequency of 4.4×10^6 Hz:
This combination is not valid because the frequency is extremely low for visible light. Visible light waves have frequencies typically ranging from 4.3×10^14 Hz (violet) to 7.5×10^14 Hz (red). Therefore, this option is incorrect.
4. A wavelength of 675 nm and a frequency of 1.2×10^5 Hz:
This combination is not valid because the frequency is extremely low for visible light. As mentioned earlier, visible light waves have frequencies typically ranging from 4.3×10^14 Hz (violet) to 7.5×10^14 Hz (red). Therefore, this option is incorrect.
5. A wavelength of 675 nm and a frequency of 1.2×10^14 Hz:
This combination is not valid because the frequency is still too low for visible light. As mentioned earlier, visible light waves have frequencies typically ranging from 4.3×10^14 Hz (violet) to 7.5×10^14 Hz (red). Therefore, this option is incorrect.
In summary, the only valid representation of an electromagnetic wave in the visible spectrum among the given options is a wavelength of 675 nm and a frequency of 4.4×10^14 Hz.
Learn more about electromagnetic wave
https://brainly.com/question/22058311
#SPJ11
This system starts from rest. M1 moves up the incline plane 8 m in 4 seconds. What is m1 's acceleration? m/s ∧
5 4 8 12 1 Question 2 If the mass of m1 is 30 kg, what is the sum of forces parallel to the incline? N 30 40 50 The kinetic coefficient of friction between m1 and the plane is 0.4 and the angle of the incline is 53 degrees, what is the tension in the cable? Assume acceleration due to gravity is 10 m/s ∧
2 41.2 51.2 61.2 71.2 Question 4 1 pts How much work does friction do? 7.2 −7.2 57.6 −57.6 What is the required mass for m2? kg 5.4 5.8 6.8
Question 1: the acceleration of m1 is 2 m/s^2.
Question 2:the sum of forces parallel to the incline is 120 N. Question 3:the tension in the cable is 61.2 N. Question 4: the required mass for m2 is 6.8 kg.
Question 1:Given,m1 = ?v1 = 0s = 4td1 = 8mNow, to find the acceleration of m1Acceleration formula, v = u + atv1 = u1 + a x 4where u1 = 0 as it starts from restv1 = a x 4a = v1/4a = 8/4a = 2m/s^2Therefore, the acceleration of m1 is 2 m/s^2.
Question 2:Given,Mass of m1 = 30 kgTo find the sum of forces parallel to the inclineWe need to calculate the force of friction Frictional force, F = μRwhere μ = 0.4R = mgR = 30 x 10R = 300 NTherefore,F = μR = 0.4 x 300F = 120 NTherefore, the sum of forces parallel to the incline is 120 N.
Question 3:Given,Mass of m1 = 30 kgKinetic coefficient of friction, μk = 0.4Angle of the incline, θ = 53°Tension in the cable = ?Acceleration due to gravity = g = 10 m/s^2We can resolve the forces acting on m1 as shown in the figure below:Here, Fp is the parallel force, Fn is the normal force, and T is the tension in the cable.
The equations of motion in the vertical and horizontal directions can be written as follows:Vertical direction:Fn – mg = 0Fn = mgFn = 30 x 10Fn = 300 NHence, the normal force, Fn = 300 NHorizontal direction:Fp – Ff – T = maFp = m1g sinθFf = μkFnFp = 30 x 10 x sin 53°Fp = 232.7 NAnd,Ff = μkFnFf = 0.4 x 300Ff = 120 NTotal force acting on the object,F = Fp – Ff – TTherefore,30 x 10 x sin 53° – 0.4 x 300 – T = 30 x 2T = 61.2 NTherefore, the tension in the cable is 61.2 N.
Question 4:Given,Work done by friction = ?Distance travelled by m1 = d1 = 8 mCoefficient of kinetic friction, μk = 0.4The work done by friction can be calculated as follows:Work done by friction = force of friction x distance= Ff x d1where,Ff = μkFnFf = 0.4 x 300Ff = 120 NTherefore,Work done by friction = 120 x 8Work done by friction = 960 JTherefore, the work done by friction is 960 J.Required mass for m2 = 6.8 kgHence, the required mass for m2 is 6.8 kg.
Learn more about kinetic friction here,
https://brainly.com/question/14111192
#SPJ11
57 .. A small plane departs from point A heading for an air- port 520 km due north at point B. The airspeed of the plane is 240 km/h and there is a steady wind of 50 km/h blowing directly toward the southeast. Determine the proper heading for the plane and the time of flight. SSM 1/- سامد - )
The plane's heading should be approximately 13 degrees east of north, and the time of flight will be 2.28 hours.
To determine the proper heading for the plane, we need to consider the effect of the wind on its trajectory. Since the wind is blowing directly toward the southeast, it will create a force that opposes the plane's northward motion. We can break down the wind velocity into its northward and eastward components using trigonometry.
The northward component will be 50 km/h multiplied by the sine of 45 degrees, resulting in a value of approximately 35.4 km/h. Subtracting this from the plane's airspeed of 240 km/h gives us an effective northward velocity of approximately 204.6 km/h.
Next, we can use this effective northward velocity to calculate the time of flight. Dividing the distance between points A and B (520 km) by the effective northward velocity (204.6 km/h) gives us approximately 2.54 hours. However, we need to account for the wind's eastward force.
The eastward component of the wind velocity is 50 km/h multiplied by the cosine of 45 degrees, which is approximately 35.4 km/h. Multiplying this by the time of flight (2.54 hours) gives us an eastward distance of approximately 90 km. Subtracting this eastward distance from the total distance traveled (520 km) gives us the northward distance covered by the plane, which is approximately 430 km. Finally, dividing this northward distance by the effective northward velocity gives us the corrected time of flight, which is approximately 2.28 hours.
Learn more about wind velocity here:
https://brainly.com/question/8486728
#SPJ11
A 7.8 cm diameter horizontal pipe gradually narrows to 4.8 cm . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 35.0 kPa and 21.0 kPa , respectively.
What is the volume rate of flow?
Bernoulli’s equation P₁ + ρgh₁ + 1/2 ρv₁² = P₂ + ρgh₂ + 1/2 ρv₂² Where; P₁ + 1/2 ρv₁² = pressure at point. Therefore, The volume rate of flow is 0.02 m³/s.
Diameter of horizontal pipe = 7.8 cm, Gradual narrowing to 4.8 cm. Gauge pressure in 1st section = 35.0 kPa, Gauge pressure in 2nd section = 21.0 kPa. The volume rate of flow is 0.02 m³/s.
Bernoulli’s equation P₁ + ρgh₁ + 1/2 ρv₁² = P₂ + ρgh₂ + 1/2 ρv₂²
Where;P₁ + 1/2 ρv₁² = pressure at point 1P₂ + 1/2 ρv₂² = pressure at point 2ρ = density of waterh₁ = height of water column at point 1h₂ = height of water column at point 2v₁ = velocity of water at point 1v₂ = velocity of water at point 2We are going to neglect the elevation difference between point 1 and point 2.
Now let's simplify the Bernoulli’s equation.P₁ + 1/2 ρv₁² = P₂ + 1/2 ρv₂²........(1)We know the diameter of the pipe at point 1 and point 2 but we are not given the velocity.
We can use the continuity equation to find velocity; A₁v₁ = A₂v₂A₁ = π(0.078/2)² = 0.0048 m², A₂ = π(0.048/2)² = 0.0018 m², A₁v₁ = A₂v₂v₂ = A₁v₁ / A₂ = 0.0048v₁ / 0.0018 = 13.33v₁
Now, we have found v₂ in terms of v₁. Substitute this value in equation (1) and simplify;P₁ + 1/2 ρv₁² = P₂ + 1/2 ρ (13.33v₁)²P₁ - P₂ = 1/2 ρ [(13.33)² - 1]v₁²ρ = 1000 kg/m³ (density of water at room temperature)P₁ - P₂ = 1/2 × 1000 × [(13.33)² - 1]v₁²P₁ - P₂ = 92,847v₁²........(2)
We have two equations (1) and (2) and two variables v₁ and P₁. Solve them simultaneously.
Let's rearrange equation (2) to find P₁;P₁ = P₂ + 92,847v₁²Plug this value of P₁ in equation (1) and
simplify ;
P₂ + 1/2 ρv₁²
= P₂ + 1/2 ρ (13.33v₁)² - 92,847v₁²1/2 ρ [(13.33)² - 1]v₁² = P₂ - P₂ + 92,847v₁²1/2 × 1000 × [(13.33)² - 1]v₁²
= 92,847v₁²v₁
= √[2(21 - 35) × 1000 / [(13.33)² - 1]]
= 2.68 m/s
Now, we have found the velocity of water. Let's find the volume rate of flow;Q = A₁v₁Q = π(0.078/2)² × 2.68Q = 0.000102 m³/s
The volume rate of flow is 0.02 m³/s.
Learn more about Bernoulli’s equation here:
https://brainly.com/question/30738722
#SPJ11
Trie or Fafse: When an object is moving slower than 1% of the speed of light, Elnstein's Theory of Relativity would be the best tool to use to analyze the motion of the object. True False
The given statement is false and special relativity is not the best tool to use to analyze the motion of the object if the object is moving slower than 1% of the speed of light. Hence, this statement is False.
Trie or False: When an object is moving slower than 1% of the speed of light, Elnstein's Theory of Relativity would be the best tool to use to analyze the motion of the object. The given statement is FALSE. This statement contradicts Einstein's theory of relativity.The theory of relativity is divided into two parts, special relativity and general relativity.
Both theories work best in different situations. Special relativity explains the relationship between space and time, whereas general relativity describes the relationship between matter, gravity, and spacetime.In general relativity, when an object moves at a high speed or in a strong gravitational field, its motion can be analyzed accurately using this theory.
At low speeds or without a strong gravitational field, general relativity is not required to analyze the motion of an object.Einstein's theory of special relativity is more accurate and reliable than classical mechanics to analyze the motion of an object moving close to the speed of light, but it is not required to analyze the motion of an object moving slower than 1% of the speed of light.
Hence the given statement is false and special relativity is not the best tool to use to analyze the motion of the object if the object is moving slower than 1% of the speed of light. Hence, this statement is False.
Learn more about gravitational field here,
https://brainly.com/question/28437652
#SPJ11
If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds? Answer 14. A stroboscope is set to flash every 9.00×10 −5
s. What is the frequency of the flashes? Answer 15. When an 90.0-kg man stands on a pogo stick, the spring is compressed 0.150 m. What is the force constant of the spring? Answer 16. What is the period of a 1.00−m-long pendulum?
The period of the 1.00-meter-long pendulum is approximately 2.01 seconds. The period represents the time it takes for the pendulum to complete one full swing, moving back and forth from one extreme to the other.
The period of a pendulum is the time it takes to complete one full swing. For a 1.00-meter-long pendulum, the period can be calculated using the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
To find the period of a pendulum, we can use the formula T = 2π√(L/g), where T represents the period, L is the length of the pendulum, and g is the acceleration due to gravity. In this case, we have a 1.00-meter-long pendulum. The acceleration due to gravity on Earth is approximately 9.8 m/s². Plugging these values into the formula, we get:
T = 2π√(1.00/9.8)
≈ 2π√(0.102)
≈ 2π × 0.320
≈ 2.01 seconds
Therefore, the period of the 1.00-meter-long pendulum is approximately 2.01 seconds. The period represents the time it takes for the pendulum to complete one full swing, moving back and forth from one extreme to the other. This value is influenced by the length of the pendulum and the acceleration due to gravity, and it remains constant as long as these factors remain unchanged.
Learn more about period of a pendulum:
https://brainly.com/question/29702798
#SPJ11
Three resistors are connected in parallel. If their respective resistances are R1 = 23.0 Ω, R2 = 8.5 Ω and R3 = 31.0 Ω, then their equivalent resistance will be: a. 5.17 Ω
b. 62.5 Ω
c. 0.193 Ω
d. 96.97 Ω
The equivalent resistance of the three resistors connected in parallel is 5.17 Ω.
The equivalent resistance of the three resistors that are connected in parallel is calculated as follows:
The formula for calculating the equivalent resistance for resistors in parallel is given as:
1/Rp = 1/R1 + 1/R2 + 1/R3 +...+ 1/Rn
where Rp is the equivalent resistance, and R1, R2, R3 and so on are the resistances in ohms.
The values of resistances are given as:
R1 = 23.0 Ω
R2 = 8.5 Ω
R3 = 31.0 Ω
Substitute the given values of resistances into the equation:
1/Rp = 1/23.0 + 1/8.5 + 1/31.0
1/Rp = 0.043 + 0.118 + 0.032
1/Rp = 0.193
To find the equivalent resistance, we take the reciprocal of both sides of the equation:
Rp = 1/0.193
Rp = 5.18 Ω
Learn more about resistances: https://brainly.com/question/24119414
#SPJ11