The equilibrium concentrations of CO₂, H₂, and CO are 0.170 M, 0.084 M, and 0.016 M, respectively.
The equilibrium amounts, what are they?Making an equilibrium concentration calculation. A chemical reaction is said to be in a state of chemical equilibrium when both the reactants and the products are in a concentration that does not vary over time any longer.
The reaction's equilibrium constant formula is as follows:
Kc = ([CO][H₂O])/([CO₂][H₂])
We obtain the following by plugging in the equilibrium amounts from the ICE table:
Kc = ((x)(0.0856))/((0.20 - x)(0.10 - x))
b. In order to determine Kc, we must first determine x using the equilibrium formula and the specified equilibrium H₂O concentration:
Kc = ((x)(0.0856))/((0.20 - x)(0.10 - x)
Kc = (x(0.0856))/(0.02 - 0.3x + x - 0.01x)
Kc = (x(0.0856))/(0.02 - 0.21x)
Kc(0.02 - 0.21x) = 0.0856x
0.02Kc - 0.21Kcx = 0.0856x
0.21Kcx + 0.0856x = 0.02Kc
x(0.21Kc + 0.0856) = 0.02Kc
x = (0.02Kc)/(0.21Kc + 0.0856)
x = (0.02Kc)/(0.21Kc + 0.0856
After solving for the equilibrium concentrations of CO₂, H₂, and CO and substituting this equation for x back into the ICE table, we arrive at:
[CO₂] = 0.170 M
[H₂] = 0.084 M
[CO] = 0.016 M
To know more about equilibrium concentrations visit:-
https://brainly.com/question/13043707
#SPJ9
Q5. How many atoms of ions are there in 363g of Iron fillings? (Atomic weight of Iron is 55.85 a.m.u) 1.6.71x10²4 atoms 2. 3.91×1024 atoms 3. 0.31x1024 atoms 4. 23.71x10²4 atoms
The solution, which is closest to option 4, is 7.816 x 10²⁴ atoms of ions.
Why are atoms referred to as ions?An atom can generate a positive charge or a negative charge depending on whether the number of electrons in the atom is greater or fewer than the number of protons in the atom. When one atom is drawn to another atom as a result of an imbalance in the numbers of its electrons and protons, it is referred to as an ION.
We must first figure out how many moles of iron there are in 363 g of iron fillings in order to answer this problem. The formula is as follows:
number of moles=mass/molar mass
The molar mass of iron (Fe) is 55.85 g/mol. Therefore:
number of moles of iron = 363 g / 55.85 g/mol = 6.499 mol
363 g of iron fillings have the following amount of iron ions in total:
total number of iron ions = 2 x number of moles of iron
= 2 x 6.499 mol
= 12.998 mol
The number of moles of iron ions can be converted to the overall amount of iron ions using Avogadro's number (6.022 x 10²³ ions/mol) as follows:
total number of iron ions
= 12.998 mol x 6.022 x 10²³ ions/mol
= 7.816 x 10²⁴ ions
To know more about ions visit:-
https://brainly.com/question/14982375
#SPJ1
how the transformer work
Answer:
make me brainalist
Explanation:
The core of the transformer works to direct the path of the magnetic field between the primary and secondary coils to prevent wasted energy. Once the magnetic field reaches the secondary coil, it forces the electrons within it to move, creating an electric current via electromotive force (EMF).
How many moles of MgS are in 1.00g MgS?
Answer:
24.31 g/mol.
Explanation:
moles =mass/molar mass
n=w/m
5. Use the formula that states the mass-to-volume ratio of a substance to solve the following:
(a) what is the density of a substance that has a mass of 7.9 g and a volume of 4.3 cm³?
(b) what is the mass of a substance that has a density of 8.9 g/cm³ and a volume of 5 cm³?
(c) what is the volume of a substance that has a density of 1.25 g/mL and a mass of 150 g?
Answer:
Explanation:
Part A
Density equals mass divided by volume. The units for density are g/cm³ or g/mL. Note that 1 cm³ = 1 mL.
d = m/v
Substitute the mass and the volume into the equation and then divide the bottom number into the top number.
d = 7.9 g/4.3 cm³ = 1.8 g/cm³
Part B
The density of a substance can be used as a conversion factor to find either the mass of the substance or the volume of the substance.
5 cm³ x 8.9 g/cm³ = 45 g
Note that cm³ units cancel and you are left with grams.
Part C
We will use the density of the substance to find the volume of the substance.
150 g x 1 mL/1.25 g = 120 mL
Note that you can invert density so the units of g cancel and you are left with mL.
What is the solubility of Mg(OH)₂ at a pH of 12.80? (Ksp Mg(OH)₂ is 1.6 × 10⁻¹³)
The calculations show that Mg(OH)₂ has a solubility of 3.5 × 10⁻⁵ M at a pH of 12.80.
The term pH, which stands for "potential of hydrogen ions," can be interpreted as a measurement of the molar concentration of hydrogen ions in a particular solution. Hence, the acidity, neutrality, or basicity of any chemical solution is often determined or specified using the power of hydrogen ions (pH).
Mg(OH)₂⇔Mg²⁺(aq)+2OH⁻(aq)
First of all, we would write the chemical equation for this chemical reaction that is appropriately balanced
The Ksp for the aforementioned chemical reaction is determined mathematically by:
Ksp = [Mg²⁺][OH⁻]²
Ksp = [x][2x]²
1.6 × 10⁻¹³ = 4x³
x = ∛4 × 10⁻¹⁴
x = 3.5 × 10⁻⁵ M.
The maximum amount of a chemical that will dissolve in a particular amount of solvent at a particular temperature is known as its solubility. Different compounds have very varying solubilities, which is a characteristic of a particular solute-solvent pair.
Learn more about solubility here
https://brainly.com/question/27278411
#SPJ1
•H₂O + SO3 → H₂ SO4
•PbSO4 → PbSO3 + 02
•C2H4 + O2 → CO2 + H₂O
•Mg + Fe2 O3 → Fe + MgO
•NaBr + H3PO4
•Na3PO4 + HBr
1. Synthesis
2. Decomposition
3.Single-
Replacement
4.Double-
Replacement
5. Combustion
The types of chemical reaction for the reactions given are.
Synthesis: H₂O + SO3 → H₂SO4
Decomposition: PbSO4 → PbSO3 + O2
Single- Replacement: Mg + Fe2O3 → Fe + MgO
Double- Replacement: NaBr + H3PO4 → Na3PO4 + HBr
Combustion: C2H4 + O2 → CO2 + H2O
Types of chemical reaction explained.Synthesis: A type of chemical reaction where two or more simple substances combine to form a more complex product. H₂O + SO3 → H₂ SO4: Water and sulfur trioxide react to form sulfuric acid, which is a more complex compound.Decomposition: A type of chemical reaction where a complex substance breaks down into two or more simpler substances. PbSO4 → PbSO3 + 02: Lead(II) sulfate breaks down into lead(II) sulfite and oxygen gas.Single-Replacement: A type of chemical reaction where an element replaces another element in a compound. Mg + Fe2 O3 → Fe + MgO: Magnesium replaces iron in iron oxide to form magnesium oxide, and iron is produced.Double-Replacement: A type of chemical reaction where two compounds exchange ions to form two new compounds. NaBr + H3PO4 → Na3PO4 + HBr: Sodium bromide and phosphoric acid exchange ions to form sodium phosphate and hydrobromic acid.Combustion: A type of chemical reaction where a fuel (typically a hydrocarbon) reacts with oxygen to produce carbon dioxide and water. C2H4 + O2 → CO2 + H₂O: Ethene (a hydrocarbon) reacts with oxygen to produce carbon dioxide and water.
Therefore, A chemical reaction is a process that leads to the transformation of one set of chemical substances to another set. In other words, it is the process by which atoms are rearranged to create new chemical compounds.
Learn more about chemical reaction below.
https://brainly.com/question/11231920
#SPJ1
Mention the most suitable separation technique that may be used to separate the components and explain briefly how separation is achieved under the separation technique
Solid components from blood
Answer:
centrifugation
Explanation:
Centrufugal force is used to separate the components of blood red blood cells,platelets and plasma from each other,The result is that particles with different densities precipitate in layers
A beryllium (Be) atom contains 4 protons, 5 neutrons, and 4 electrons. What would be formed if one proton were removed from this atom?
A. A neutral atom of lithium
B. A lithium ion
C. A beryllium ion
D. An isotope of beryllium
Write the chemical reactions for the formation of the respective Grignard reagents from the reaction of magnesium with the following organic halides: iodomethane, bromobenzene, chlorocyclohexane
Answer:
Here are the chemical reactions for the formation of the respective Grignard reagents from the reaction of magnesium with the following organic halides:
Iodomethane:Mg + CH3I → CH3MgI
Bromobenzene:Mg + C6H5Br → C6H5MgBr
Chloropropane:Mg + C3H7Cl → C3H7MgCl
Grignard reagents are formed when magnesium metal is reacted with an alkyl halide. The magnesium metal reacts with the halide to form a magnesium halide salt, and the alkyl group is displaced from the halide to form the Grignard reagent.
The Grignard reagent is a powerful nucleophile and can be used to synthesize a variety of organic compounds.
Calculate the decrease in temperature when 6.0 L at 21.0 °C is compressed to 3.0 L.
The decrease in temperature is 147.075 K. The SI unit for temperature is the kelvin (K), but it can also be measured in degrees Celsius (°C) or Fahrenheit (°F).
What is Temperature?
Temperature is a physical property that measures the degree of hotness or coldness of an object or system, as compared to a standard reference point. It is a measure of the average kinetic energy of the particles (atoms or molecules) in a substance or system.
To solve this problem, we need to use the Charles's law equation which states:
V1/T1 = V2/T2
where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature.
We can rearrange the equation to solve for T2:
T2 = (V2/T2) x T1
First, we need to convert the initial temperature from Celsius to Kelvin by adding 273.15:
T1 = 21.0°C + 273.15 = 294.15 K
The initial volume (V1) is 6.0 L, and the final volume (V2) is 3.0 L. Substituting these values into the equation, we get:
(6.0 L/294.15 K) = (3.0 L/T2)
Solving for T2, we get:
T2 = (3.0 L x 294.15 K) / 6.0 L
T2 = 147.075 K
Finally, we can find the decrease in temperature by subtracting the final temperature (T2) from the initial temperature (T1):
ΔT = T1 - T2
ΔT = 294.15 K - 147.075 K
ΔT = 147.075 K
Learn more about Temperature from the given https://brainly.com/question/26866637
#SPJ1
What periodic trend does the atomic radius follow? A. It increases from left to right. B. It decreases from top to bottom. C. It stays the same across the table. D. It decreases from left to right.
Answer: D
Explanation:
It increases from right to left and down the periodic table. So your answ3er would be D. that it is decreasing from left to right.
Indicate the type of intermolecular forces hold liquid nitrogen (N2) together?
Answer:
Nitrogen liquefies at -195.8°C at room temperature.
At -182.95°C, the periodic table equivalent (oxygen) boils.
The boiling point of nitrogen is lower because there are fewer interactions between nitrogen molecules (N2).
The degree of electron fluctuation within a molecule affects interactions between non-polar molecules.
Van der Waals forces are the oldest sort of intermolecular contact, named after Dutch chemist Johannes van der Waals.
The Van der Waals forces, which include dipole-dipole and dispersion forces, are the weakest intermolecular forces.
Scientists often review the results of other scientists' work. Which of the following is a good reason for this review? I. A scientist can receive credit for another scientist's work simply by reviewing it. II. Reviewing scientific results help to ensure that the results are accurate. III. Reviewing scientific results helps to ensure that scientists are objective when they perform experiments. IV. Sometimes additional important questions can be raised when a scientist's work is reviewed. A. I, III, and IV only B. II and IV only C. II, III, and IV only D. I, II, and III only
Answer:
The correct answer is B) II and IV only.Explanation:
I. A scientist cannot receive credit for another scientist's work simply by reviewing it. Credit is given only to the person or team that did the research.
II. Reviewing scientific results is a crucial step in the scientific process to ensure that the results are accurate and reliable.
III. While reviewing scientific results can help ensure objectivity in the research process, it is not the main purpose of scientific review.
IV. Reviewing scientific results can lead to new and important questions, as well as identify areas for future research.
Therefore, options I and III are incorrect and option B is the best answer.
Answer:
The correct answer is B. II and IV only.
Explanation:
Explanation:
I. A scientist cannot receive credit for another scientist's work simply by reviewing it. Therefore, this option is incorrect.
II. Reviewing scientific results helps to ensure that the results are accurate. This is one of the most important reasons for reviewing scientific work, as it helps to maintain the integrity and credibility of scientific research.
III. Reviewing scientific results does not necessarily help to ensure that scientists are objective when they perform experiments. Therefore, this option is incorrect.
IV. Sometimes additional important questions can be raised when a scientist's work is reviewed. This is another important reason for reviewing scientific work, as it can help to stimulate new ideas and research directions.
Therefore, the only options that are valid are II and IV.
Based on your knowledge of Earth History, what event in geologic history do you think is recorded in the Allamuchy Pond sediments? Explain using evidence from the image. ( Use a CER format )
Based on the image given, scientists identified each type of pollen to study what types of plants were living in the area at different times in the past.
Why are the Allamuchy Pond sediments important?Pond sediment can preserve valuable historical data. Layers of sedimentary information can be used to provide a chronology of the history of a pond site. Allamuchy Pond sediments have been studied for their paleoclimate and paleoenvironmental information. Allamuchy Pond sediments have been dated to the Pleistocene epoch, which lasted from about 2.6 million to 11,700 years ago. The Pleistocene was characterized by repeated cycles of glaciation and deglaciation, and it is possible that the sediments in Allamuchy Pond contain evidence of these cycles, such as glacial deposits or variations in sediment composition related to changes in climate. Additionally, the sediments may contain information about changes in local vegetation, water levels, or other environmental factors that occurred during the Pleistocene.
To know more about pond sediments, visit:
https://brainly.com/question/28023660
#SPJ1
What is the mole ratio of ammonia (with a pKb of 4.75) to ammonium chloride in a buffer with a pH of 9.15
The Henderson-Hasselbalch equation can be used to calculate the mole ratio of ammonia to ammonium chloride pH is equal to pKb plus [tex]log(NH3/NH4Cl).[/tex]
The equation can be changed to answer the question: What is the mole ratio of ammonia?Figure 1 depicts the chemical equation for producing ammonia and demonstrates that the mole ratio of ammonia to nitrogen gas is [tex]2:1[/tex]. As seen in the chemical reaction, one mole of nitrogen gas results in the production of two moles of ammonia.
How is the mole ratio determined?By dividing the total number of moles by the smallest number of moles, you may determine the ratio or the number of moles of each element.
To know more about ammonia visit:-
brainly.com/question/15409518
#SPJ9
What are the best insulators to keep ice from melting for at least twenty minutes? Please name at least 6.
Answer:
Here are six materials that are good insulators to keep ice from melting for at least twenty minutes:
Styrofoam: This material is often used to make insulated coolers because of its low thermal conductivity, which makes it an excellent insulator.
Fiberglass: This material is often used in insulation for walls and attics because it traps air and reduces heat transfer.
Polyurethane foam: This material is used to insulate refrigerators and freezers because of its excellent thermal insulation properties.
Cellulose insulation: This is a type of insulation made from recycled materials that provides good thermal insulation.
Mineral wool: This is a type of insulation made from natural rock materials that provides good thermal insulation and fire resistance.
Aerogel: This is a highly effective insulator made from a gel-like substance that has been dried to create a material that is more than 95% air. It is often used in scientific applications where extreme temperature control is required.
This paper looks much
Answer:
What paper
Explanation:
What do you mean by paper is too much fir you that paper do youneed help with that paper sir i gotchu withthat paper
Consider the reaction for the formation of aluminum oxide from aluminum and oxygen.
4Al(s)+3O2(g)⟶2Al2O3(s)Δ1
Express the enthalpy of the following reaction, Δ2,
in terms of Δ1.
2Al2O3(s)⟶4Al(s)+3O2(g)Δ2
Express the enthalpy of the following reaction, Δ3,
in terms of Δ1.
12Al(s)+9O2(g)⟶6Al2O3(s)Δ3
Express the enthalpy of the following reaction, Δ4,
in terms of Δ1.
2Al(s)+32O2(g)⟶Al2O3(s)Δ4
To solve for Δ2, we need to reverse the reaction and change the sign of Δ1:
2Al2O3(s)⟶4Al(s)+3O2(g)Δ2 = -Δ1
Therefore, Δ2 = -Δ1.
To solve for Δ3, we need to add the reactions for the formation of two moles of Al2O3 from aluminum and oxygen:
4Al(s)+3O2(g)⟶2Al2O3(s)Δ1
2Al2O3(s)⟶4Al(s)+3O2(g)Δ3
Adding these equations gives:
12Al(s)+9O2(g)⟶6Al2O3(s)Δ3
Therefore, Δ3 = 2Δ1.
To solve for Δ4, we need to divide the reaction for the formation of two moles of Al2O3 by two:
2Al(s)+3O2(g)⟶Al2O3(s)Δ1/2
Multiplying this equation by 16 gives:
32Al(s)+48O2(g)⟶16Al2O3(s)8Δ1/2
We can then cancel out the formation of 14 moles of Al2O3:
2Al(s)+32O2(g)⟶Al2O3(s)Δ4 = 8Δ1/2 - 7Δ1
Therefore, Δ4 = 8Δ1/2 - 7Δ1.
determine the value of the enthalpy change for the following reaction using the information below H2O(l) to H2O (g)
Ch4(g)+2o2 to co2+2h2o(l)
Ch4+2o2 to co2 +2h2o(g)
The enthalpy change for the given reaction is -802.3 kJ/mol, indicating that the reaction is exothermic, i.e., it releases energy in the form of heat.
To find the enthalpy change for the given reaction, we need to use the standard enthalpy of formation values for the compounds involved.
The balanced chemical equation for the reaction is:
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
The enthalpy change (ΔH) for the reaction can be calculated as follows:
ΔH = ΣnΔHf(products) - ΣnΔHf(reactants)
where n is the number of moles of each compound and ΔHf is the standard enthalpy of formation of the compound.
Using the standard enthalpy of formation values from a reference table, we can calculate the enthalpy change as follows:
ΔH = [ΔHf(CO2) + 2ΔHf(H2O(g))] - [ΔHf(CH4) + 2ΔHf(O2(g))]
ΔH = [(−393.5 kJ/mol) + 2(−241.8 kJ/mol)] - [−74.8 kJ/mol + 2(0 kJ/mol)]
ΔH = −802.3 kJ/mol
Therefore, the enthalpy change for the given reaction is -802.3 kJ/mol, indicating that the reaction is exothermic, i.e., it releases energy in the form of heat.
What is enthalpy change?
Enthalpy change is the amount of heat released or absorbed in a chemical reaction at a constant pressure. It is a measure of the difference in enthalpy (the heat energy of a system at constant pressure) between the products and the reactants of a chemical reaction.
To know more about enthalpy change, visit:
https://brainly.com/question/29556033
#SPJ1
The enthalpy of vaporization for water is 40.7 kJ/mol. Water has a vapor pressure of 101.3 kPa at 100.0 oC. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 77.2 oC?
The acid should be handled with great care why?
The acid should be handled with great care because Acids are highly corrosive in nature. Splashing of acid on our skin can cause severe burns and irritation in the skin. Therefore, we should be careful while handling acids.
What is an acid?An acid is a type of chemical substance that donates positively charged hydrogen ions (H+) to other substances, typically in a chemical reaction. Acids are defined as substances that have a pH value of less than 7 on the pH scale, which measures the acidity or alkalinity of a solution. The lower the pH value, the more acidic the substance is.
Some common examples of acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), and acetic acid (CH3COOH). Acids can be found in a wide range of natural and synthetic substances, including citrus fruits, vinegar, and battery acid. They can be corrosive and dangerous if not handled properly.
Learn more about acid at:
https://brainly.com/question/25148363
#SPJ1
I have included an overview of the topics you MUST include in your presentation.
Topic Outlines:
Biomass (10 points)
1. What does “Biomass” mean? How is Biomass being used today as a substitute for gasoline to run cars, trucks or buses?
2. What are some different ways Biomass is being used to heat homes today?
3. Name and explain 3 advantages/disadvantages in using Biomass compared to using Fossil Fuels or other alternative energies (specifically include environmental issues that can happen).
4. Explain the energy conversions when producing energy with Biomass. (Use the words: Potential Energy and Kinetic Energy).
Geothermal (10 point)
5. Where does geothermal energy come from?
6. How can geothermal energy be used to create electricity?
7. How can geothermal energy be used directly to heat homes and factories?
8. What is a “heat pump”?
9. Name and explain 3 advantages and disadvantages in using geothermal energy compared to using fossil fuels and other alternative energies. (Specifically include environmental issues that can happen).
Hydroelectric (10 points)
10. What is a good definition of hydroelectric power?
11. How does “moving water” get turned into electrical energy? Explain each part of the dam from the moving water to production of electricity.
12. Name and explain 3 advantages/disadvantages of getting electricity from hydroelectric power and how it compares to using fossil fuels or alternative energies. (specifically include environmental issues that can happen
13. Find one example in the U.S. that uses hydroelectric power to create electricity?
Hydrogen (10 points)
14. What does using hydrogen as a fuel source mean? How is it combined to create an energy source?
15. Explain where hydrogen is found. What are sources of hydrogen found on Earth?
16. Name and explain 3 advantages/disadvantages of using hydrogen as a fuel source and how it compares to using fossil fuels and other alternative energies (specifically include environmental issues that can happen.
17. What is a fuel cell? How does it work? (include diagram)
Solar Power (10 points)
18. What is a good definition of solar energy?
19. How does a solar cell make electricity? What is it made of?
20. Name and explain 3 advantages/disadvantages about solar energy to heat or produce electricity compared to using fossil fuels or other alternatives (specifically include environmental issues that can happen.
21. Find an example of solar energy being used in the U.S.?
Wind Energy (10 points)
22. Where does wind energy come from? What is a good definition of wind energy?
23. How does wind energy get turned into electrical energy?
24. Name and explain 3 advantages/disadvantages of getting electricity from wind energy compared to using fossil fuels or other alternative energies (specifically include environmental issues that can happen.
25. Find an example in the U.S. that uses wind energy to create electricity?
Answer:
Introduction: (5 points)
Before diving into each topic, it's important to understand why alternative energies are important. Fossil fuels are limited resources that produce harmful emissions and contribute to climate change. Therefore, we must turn to alternative energies to reduce our reliance on these resources and mitigate their negative impacts on the environment. In this presentation, we will discuss five alternative energies: Biomass, Geothermal, Hydroelectric, Hydrogen, Solar Power, and Wind Energy.
Biomass: (10 points)
1.
Biomass refers to organic matter, such as wood, crops, and waste, that can be converted into energy. Biomass can be used as a substitute for gasoline to run cars, trucks or buses.
2.
Biomass can be used to heat homes through wood stoves, pellet stoves, and biomass boilers.
3.
Advantages of biomass include its renewability, availability, and its ability to reduce waste. However, it can also lead to deforestation, land-use change, and pollution.
4.
Biomass energy production involves converting potential energy (stored in biomass) into kinetic energy (in the form of steam), which is then used to generate electricity.
Geothermal:
5.
Geothermal energy comes from the heat within the Earth's crust.
6.
Geothermal energy can be used to create electricity through steam turbines.
7.
Geothermal energy can be used directly to heat homes and factories through geothermal heat pumps.
8.
A heat pump is a device that transfers heat from a colder area to a hotter area.
9.
Advantages of geothermal energy include its reliability, low emissions, and its ability to provide heating and cooling. However, it can also lead to land subsidence, water pollution, and seismic activity.
Hydroelectric:
10.
Hydroelectric power is electricity generated from the movement of water.
11.
Moving water turns a turbine, which spins a generator to produce electricity. The dam is used to regulate the flow of water and to control the amount of electricity generated.
12.
Advantages of hydroelectric power include its renewability, efficiency, and ability to provide flood control. However, it can also lead to the displacement of communities, harm aquatic life, and reduce downstream water availability.
13.
The Hoover Dam in Nevada is an example of a hydroelectric power plant.
Hydrogen:
14.
Using hydrogen as a fuel source involves combining it with oxygen to produce energy in the form of electricity and water vapor.
15.
Hydrogen is found in water, fossil fuels, and organic matter.
16.
Advantages of using hydrogen as a fuel source include its renewability, abundance, and its ability to reduce emissions. However, it can also be expensive to produce, transport, and store.
17.
A fuel cell is an electrochemical device that converts hydrogen and oxygen into electricity. It works by passing hydrogen through an anode, where it is oxidized, producing electrons and protons. The electrons flow through a circuit to produce electricity, while the protons pass through a membrane to the cathode, where they combine with oxygen to form water.
Solar Power:
18.
Solar energy is energy from the sun that can be converted into electricity.
19.
A solar cell is made of a semiconductor material, such as silicon, that absorbs photons from the sun and generates electrons. These electrons flow through a circuit to produce electricity.
20.
Advantages of solar energy include its renewability, low emissions, and its ability to reduce dependence on fossil fuels. However, it can also be expensive to install, dependent on weather conditions, and can lead to land-use change.
21.
The Topaz Solar Farm in California is an example of solar energy being used in the U.S.
Wind Energy
22.
Wind energy is a type of renewable energy that comes from the wind. Wind energy is generated by the movement of air across the earth's surface caused by differences in temperature and pressure. Wind turbines are used to convert wind energy into electrical energy.
23.
Wind energy is converted into electrical energy by wind turbines. The turbines are equipped with blades that capture the wind and spin a rotor. The rotor turns a shaft, which drives a generator that produces electricity.
24.
Advantages of wind energy include:
Wind energy is a renewable source of energy that does not emit harmful pollutants or greenhouse gases.Wind turbines can be installed on a small or large scale, making it suitable for both individual and industrial use.Wind energy can help reduce reliance on fossil fuels and contribute to a more sustainable energy mix.Disadvantages of wind energy include:
Wind turbines can be noisy and may cause visual pollution.Wind energy production is intermittent, meaning that wind turbines do not produce electricity when the wind is not blowing.Wind turbines can be dangerous to birds and bats.25.
Alta Wind Energy Center in California is an example of a wind energy project in the US. It is one of the largest wind farms in the world, with a total capacity of 1,548 MW.
Life decision pls help so here’s my problem when I look at the screen for a long time my eye gets like red like strings going to my eye and this happens both two my left and right eye from both sides and one eye is blurry and other is not when I look from fat and something when I look it’s blurry from far with both eyes?
Answer: I would suggest blue light glasses also go to a doctor because your eye veins are bullging and thats making it worse also Im not a doctor so i cant be sure but this is my tip also be careful looking under microscopes or anything with light.
Explanation:
What does conserving mass mean in a chemical equation? Responses There is equal number of each type of atom on the reactant and product side. There is equal number of each type of atom on the reactant and product side. There are more of each type of atom on the product side than on the reactant side. There are more of each type of atom on the reactant side than on the product side. There is an unequal number of each type of atom on both sides of the equation.
5. What measures how stressful exercise is on your body?
O A. Frequency
O B. Duration
O C. Volume
D. Intensity
Answer: D. Intensity
Explanation: Intensity is correct, because if you originally were working on a treadmill with a speed of 8, that is how much intensity your putting your body on. And if you put the speed for a treadmill at 11 to increase your exercise, you are increasing the speed you have to run, making it more intense. The more intense you make your workout or training, the more stressful exercise you are doing.
Hope this helps,
:)
How many mL of 2.25M H2SO4 are needed to react completely with 69.9g BaO2
Answer:
4 millllllermeeters jb
please can someone help me out with this? i need it very quickly need answer in 4 hours pls help
Explanation:nthere is your work
A 1.000 g sample of decane, C10H22, is ignited in a bomb calorimeter. The temperature of the calorimeter increases from 20.0 to 78.8 C. If the heat capacity of the calorimeter is 810.1 J/ C, determine delta E for the combustion of decane.
This is the question, and I solved the q (decane) but don't know how to solve the delta E
The internal energy change for the combustion of decane is -6709097.77 J/mol.
How heat is defined by calorimeter?
The heat absorbed by the calorimeter is given by the expression:
q = CΔT
where q is the heat absorbed by the calorimeter, C is the heat capacity of the calorimeter, and ΔT is the change in temperature of the calorimeter.
Substituting the given values, we get:
q = 810.1 J/ C x (78.8 C - 20.0 C) = 47213.48 J
This heat is released during the combustion of decane. Therefore, the enthalpy change for the combustion of decane (ΔH) can be calculated using the expression:
ΔH = -q/moles of decane
The molecular weight of decane is 142.28 g/mol. Therefore, the number of moles of decane in 1.000 g of decane is:
moles of decane = mass of decane / molecular weight of decane
= 1.000 g / 142.28 g/mol
= 0.007032 mol
Substituting the values, we get:
ΔH = -47213.48 J / 0.007032 mol = -6709097.77 J/mol
This is the enthalpy change for the combustion of decane. However, we are asked to calculate the internal energy change (ΔE) for the combustion of decane. The relationship between enthalpy change and internal energy change is given by the expression:
ΔH = ΔE + PΔV
where P is the pressure and ΔV is the change in volume. In the case of a bomb calorimeter, the volume remains constant, and therefore ΔV is zero. Therefore, we can write:
ΔH = ΔE
Substituting the value of ΔH, we get:
ΔE = -6709097.77 J/mol
Therefore, the internal energy change for the combustion of decane is -6709097.77 J/mol.
To know more about Temperature visit :-
https://brainly.com/question/25677592
#SPJ1
Once alchol is in the bloodstrram it will reach the brain I'm a few
Once alcohol is in the bloodstream it will reach the brain in a few seconds to minutes, depending on various factors such as the amount and concentration of alcohol consumed, body weight, metabolism, and other individual factors.
Alcohol's Effects on BrainAlcohol can swiftly cross the blood-brain barrier after it is ingested, having an impact on the brain and neurological system. Depending on the quantity and frequency of drinking, alcohol's effects on the brain can range from minor disturbances in judgment and coordination to more serious consequences including loss of consciousness and, in the worst circumstances, death.
Long-term changes in brain structure and function, such as cognitive impairment and a higher chance of developing specific neurological and mental illnesses, can also result from chronic alcohol consumption.
Once alcohol is in the bloodstream it will reach the brain in a few seconds to minutes, depending on various factors such as the amount and concentration of alcohol consumed, body weight, metabolism, and other individual factors.
Learn more on effects of alcohol on the body here https://brainly.com/question/6511905
#SPJ1
lithium reacts spontaneously with bromine to produce lithium bromine. write the balanced chemical equation for the reaction. if 25.0g of lithium and 25.0g of bromine are present at the beginning of the reaction determine the excess reactant and the mass of the excess.
Answer: Li is the one in excess; 22.81 g Li
Explanation:
First it forms lithium bromide
2 Li + Br2 --> 2LiBr
25 g Br2/160 g Br2 X (2moles Li /1mole Br2 ) X (7grams Li/1mole Li) = 2.19 g Li
25 g Li x ( 1mole Li/7 g Li) X ( 1 mole Br2/2 mole Li) x( 160 g Br2 / 1 mole Br2) = 285. 71 g Br2
Now you subtract starting with number given
so 25 g Li - 2.19 g Li = =22.81 g Li
25 g Br2 - 285.71 g Br2 = -260.71 g Br2 (negative means its the limiting reactant. + means its the one in excess)