a lighter block (5 kg) and a heavier block (20 kg) sit on a frictionless surface. both blocks are initially at rest. the same force of 10 n then pushes to the right on each block for a distance of 16 m. what are the changes in kinetic energy of the blocks?

The base of the swing will rise above its original level by a height of  0.2522 m m.

As the bird perched on the swing in the figure has a mass of 49 g, and the base of the swing has a mass of 142.1 g. Assume that the swing and the bird are originally at rest and that the bird then takes off horizontally at 2.27 m/s. The acceleration of gravity is 9.8 m/s².

Answer in units of m. The base of the swing will rise above its original level by 1.047 m, provided the bird perched on the swing has a mass of 49 g, and the base of the swing has a mass of 142.1 g. The method to find out the result is as follows: We will use the principle of conservation of energy to solve this problem.

We can conclude that the total mechanical energy of the system is conserved since the system consists of the swing and the bird. In other words, at the initial and final states, the sum of kinetic energy and potential energy remains the same.

Thus,

Ki + Ui = Kf + Uf

where Ki and Ui represent the initial kinetic and potential energy and Kf and Uf represent the final kinetic and potential energy.

Ki = 0 since the bird and the swing are at rest initially.'

Kf = 1/2 m(v²)

where m is the total mass of the system and v is the horizontal velocity of the bird.

Kf = 1/2 (0.1421+0.049) (2.27)²

=> 0.477 JUi

= mgh

where h is the maximum height attained by the base of the swing and g is the acceleration due to gravity. Since the bird is taking off horizontally, we know that its motion does not affect the height of the swing, so we can assume that the bird is absent.

Uf = mgh

where m is the total mass of the system and g is the acceleration due to gravity.

Since the swing and the bird are at the same height when the bird takes off,

Ui = 0.If

= 0.1421(9.8)h + 0.049(9.8)h

= 0.137hSolve for h,

we get;

h = 3.455/0.137

h = 25.22 cm

h  = 0.2522 m

To learn more about Height :

https://brainly.com/question/28308143

#SPJ11

The answer is that we expect a positive sign for δs  when the pressure on 0.860 mol of an ideal gas at 350 k is increased isothermally from an initial pressure of 0.760 atm

Assuming the process is reversible, the change in entropy can be calculated using the equation:

ΔS = nR ln(P₂/P₁)

where ΔS is the change in entropy, n is the number of moles of gas, R is the gas constant, P₁ is the initial pressure, and P₂ is the final pressure.

Substituting the given values, we get:

ΔS = (0.860 mol)(8.314 J/(mol*K)) ln(0.860 atm / 0.760 atm)

ΔS ≈ 0.109 J/K

Since the temperature is constant (isothermal process), the sign of ΔS is positive. Therefore, the answer is that we expect a positive sign for δs.

To learn more about isothermally here:

https://brainly.com/question/30036683

#SPJ11

The acceleration of the rocket can be determined using Newton's second law of motion.

This law states that the net force acting on an object is equal to its mass multiplied by its acceleration, or F = ma. The net force acting on the rocket is equal to the thrust generated by the exhaust gas, minus the gravitational force. The thrust generated by the exhaust gas is equal to the rate of change of momentum of the gas, which is equal to the mass of the gas multiplied by the exhaust speed.

Thus, the acceleration of the rocket can be calculated as a = (m_gas*v_exhaust - m_rocket*g)/m_rocket, where m_gas is the mass of the gas being exhausted, v_exhaust is the exhaust speed, m_rocket is the mass of the rocket and g is the acceleration due to gravity. Using the given values, the acceleration of the rocket is calculated to be 7.97 m/s2.

Know more about Acceleration here

https://brainly.com/question/12550364#

#SPJ11

The correct statements regarding gravitational waves are: The emission of gravitational waves from merging black holes is predicted by Einstein's General Theory of Relativity, Two orbiting neutron stars or black holes will gradually spiral toward each other as a result of energy being carried away by gravitational waves, The first direct detection of gravitational waves, announced in 2016, came from the LIGO observatory.

The correct options are (B), (C) and (F).

Einstein's General Theory of Relativity predicts the production of gravitational waves from merging black holes. According to the theory, any two heavy objects that circle one other will cause ripples in spacetime that propagate away as gravitational waves.

As a result of gravitational waves carrying away energy, two circling neutron stars or black holes will progressively spiral towards one other. The gravitational waves increase stronger as they go closer, driving the objects to spiral faster and faster until they ultimately join.

The Laser Interferometer Gravitational-Wave Observatory (LIGO) claimed the first direct detection of gravitational waves in 2016. The discovery validated Einstein's theory and opened the door to a new technique of investigating the cosmos.

Therefore, options B, C and F are correct.

For more such questions on gravitational waves, click on:

https://brainly.com/question/975043

#SPJ11

Using the right-hand rule, we can conclude that the direction of the current in the solenoid, as viewed from the top, is counter-clockwise. Therefore, the correct answer is option (B) "counterclockwise."

The direction of the current in a solenoid, as viewed from the top, depends on the orientation of the solenoid and the direction of the magnetic field.

Assuming the solenoid is oriented vertically, with the top of the solenoid pointing upwards and the bottom pointing downwards, the direction of the current can be determined using the right-hand rule.

If we wrap our right hand around the solenoid with our fingers in the direction of the current (i.e. counter-clockwise, as viewed from the top), then our thumb will point in the direction of the magnetic field inside the solenoid.

By convention, the magnetic field inside a solenoid is directed from south to north (i.e. from the bottom of the solenoid to the top), so if we look down on the top of the solenoid, the magnetic field will be pointing downwards.

To learn more about solenoids

https://brainly.com/question/15504705

#SPJ4

The average acceleration of the intercontinental ballistic missile is approximately 108.33 m/s².

The student question is asking for the average acceleration of an intercontinental ballistic missile that goes from rest to a suborbital speed of 6.50 km/s in 60.0 s.

To calculate the average acceleration, we can use the formula:

Acceleration (a) = (Final Velocity (v) - Initial Velocity (u)) / Time (t)

Given the information, the missile starts from rest, so the initial velocity (u) is 0. The final velocity (v) is given as 6.50 km/s, and the time (t) is given as 60.0 s. We need to convert the final velocity from km/s to m/s for consistency.

1 km = 1,000 m
So, 6.50 km/s = 6,500 m/s

Now, we can plug the values into the formula:

a = (6,500 m/s - 0 m/s) / 60.0 s

a = 6,500 m/s / 60.0 s

a ≈ 108.33 m/s²

To learn more about :  intercontinental

https://brainly.com/question/23822725

#SPJ11

If the goal of the lab is to investigate the behavior of the circuit under steady-state conditions, a sinusoidal waveform is often used. Here option B is the correct answer.

A sinusoidal waveform oscillates between positive and negative voltage levels in a smooth, repetitive pattern, and is commonly used to represent AC voltage signals. By varying the frequency and amplitude of the sinusoidal waveform, different aspects of the circuit's behavior can be investigated, such as its response to different frequencies and amplitudes of AC signals.

On the other hand, if the goal of the lab is to investigate the transient behavior of the circuit, such as its response to sudden changes in voltage levels, a square wave may be used. A square wave alternates between two voltage levels, typically 0 V and a non-zero voltage level, with a fast rise time and fall time. By varying the frequency and duty cycle of the square wave, different aspects of the circuit's response to sudden changes can be investigated.

If the experiment requires a linearly varying voltage signal, a ramp or triangle wave can be used. These waveforms have a linearly varying voltage level over time and can be used to investigate the circuit's response to a changing DC voltage level.

To learn more about sinusoidal waveform

https://brainly.com/question/31102187

#SPJ4

Complete question:

In this lab, after the circuit is set up what waveform will we choose from the function generator? group of answer choices

A - square wave

B - sinusoidal wave

C - linear wave

D - none

Answer: C (Irradiance)

Explanation:

It is a fact

The term for sunlight intensity is called "irradiance." (C)

Sunlight intensity, or irradiance, is a measure of the amount of solar energy falling on a surface per unit of time, typically expressed in watts per square meter (W/m²). It is an important factor to consider in various fields, such as solar energy production, agriculture, and climate studies.

Irradiance can vary depending on factors such as time of day, geographic location, and atmospheric conditions.

Unlike glow, which refers to a gentle light, or luminosity, which describes the amount of light emitted by an object, irradiance specifically focuses on the power of sunlight reaching a given surface.

To know more about luminosity click on below link:

https://brainly.com/question/20105593#

#SPJ11

Doctors are more concerned about a fever of a few degrees Celsius than a fever of a few degrees Fahrenheit because variations in body temperature are more easily understood and tracked in Celsius, which is the more popular and accurate temperature measure in the medical world.

If the human body temperature were 98.6 C (209.48 F), it would be a life-threatening condition because the temperature is well above the boiling point of water, and proteins in the body would denature, leading to irreversible damage to organs and tissues. In reality, a body temperature of 98.6 degrees Fahrenheit (37 degrees Celsius) is considered normal, while a fever is defined as a temporary increase in body temperature above this level.

Doctors worry more about a fever of a couple of degrees Celsius than a fever of a couple of degrees Fahrenheit because Celsius is the more widely used temperature scale in the medical community, and changes in body temperature are better understood and monitored in Celsius. Additionally, Celsius is a more precise temperature scale than Fahrenheit, with each degree Celsius representing a smaller change in temperature than each degree Fahrenheit. For example, a fever of 38.5 degrees Celsius (101.3 degrees Fahrenheit) is a more significant increase in body temperature than a fever of 100.4 degrees Fahrenheit, which is only 1.8 degrees Fahrenheit above normal.

Learn more about Fahrenheit here:

https://brainly.com/question/30719934

#SPJ1

An aerodynamicist wants to model the fluid as seen by a stationary observer presents the Eulerian view.

The Eulerian model is used to describe the motion of fluids, and it is based on a fixed point of observation. Eulerian viewpoint is the most frequently used fluid-dynamic perspective in the study of fluid motion. It is used to calculate the fluid's physical properties, including pressure, density, and temperature, as well as the motion of fluids in space and time.

In an Eulerian framework, fluid motion is observed from a fixed point, with the fluid and observer being two separate entities.

Hence, an aerodynamicist wants to model the fluid as seen by a stationary observer presents the Eulerian view.

To know more about Eulerian model, refer here:

https://brainly.com/question/28357993#

#SPJ11

Faraday's law tells us that a changing magnetic field creates an electric field.

The fundamental law that describes how the emf is induced in the electrical conductor is Faraday's law of induction. Faraday's law of induction states that an alteration in the magnetic field surrounding an electrical conductor will cause an emf to occur across the conductor.

The rate of change of the magnetic field connection directly correlates with the strength of this induced emf. A fundamental principle of electromagnetic that has to do with the production of electrical energy is known as Faraday's law.

A fluctuating magnetic field generates an electric field, according to Faraday's Law. comprehension electromagnetic induction, in which a shifting magnetic field induces an electromotive force (EMF) in a conductor and subsequently produces an electric current, requires a comprehension of this principle.

For more such questions on Faraday's law

https://brainly.com/question/17012638

#SPJ11

The ball will be caught by the thrower's right. The correct answer is option d.

When the merry-go-round is spinning counterclockwise, the person throwing the ball and the ball itself will have a tangential velocity in the counterclockwise direction. As the ball leaves the thrower's hand, it will continue to move in a straight line with this tangential velocity.

However, the ball is also subject to the circular motion of the merry-go-round, which means it will also have a centripetal acceleration towards the center of the merry-go-round.

As a result, the ball will follow a curved path towards the right of the thrower and will be caught by the thrower's right hand.

So, the correct answer is d. the ball caught to the thrower's right.

To know more about tangential velocity click here:

https://brainly.com/question/28738284

#SPJ11

We may utilize the physics of refraction to establish the true position of the fish from the point on the surface that seems to be in line with the picture of the fish.  The light beams from the fish are refracted at the water.

air contact and appear to emanate from a place above the fish's true position. We can compute the true depth of the fish using trigonometry to be roughly 1.13 meters. When a green light shines on a purple outfit, the costume turns black. This is due to the fact that purple is a mixture of red and blue light, but green light does not include any of these hues. As a result, when green light is shone on a purple item,water no color is produced. The item seems black because it corresponds to the green wavelength. The angle of incidence of the laser beam entering the glass should be larger than or equal to the critical angle of the glass to reduce losses in a fiber optic. The critical angle for a 632 nm laser beam in glass with a refractive index of 1.5 may be computed using Snell's law to be around 41.8 degrees. To eliminate reflection losses, the laser beam must enter the glass at an angle of 41.8 degrees or more.

learn more about water   here:

https://brainly.com/question/28465561

#SPJ4

The correct answer is: the second law of thermodynamics but not the law of conservation of energy.

The second law of thermodynamics is the fundamental law that distinguishes between the forward and backward directions of time. It states that the total entropy (disorder) of an isolated system will always increase over time in the forward direction. In the backward direction, entropy would decrease, which violates the second law.

The law of conservation of energy, on the other hand, does not distinguish between the forward and backward directions of time. It simply states that energy can neither be created nor destroyed, but only transformed from one form to another.

For more questions like thermodynamics visit the link below:

https://brainly.com/question/13002079

#SPJ11

No, the distance to a star cannot be determined strictly by the intensity of its radiation.

Stars emit radiation in the form of electromagnetic waves across the entire electromagnetic spectrum. This includes everything from radio waves, microwaves, and infrared radiation to visible light, ultraviolet radiation, X-rays, and gamma rays. The specific types and amounts of radiation emitted by a star depend on its temperature, size, age, and other properties.

Most of the radiation emitted by stars is in the form of visible light, which is what allows us to see them in the night sky. The colors of stars, ranging from red to blue, indicate their temperature, with cooler stars appearing redder and hotter stars appearing bluer.

In addition to visible light, stars also emit ultraviolet radiation, which can cause damage to living cells and is absorbed by the Earth's atmosphere. X-rays and gamma rays are also emitted by some stars, particularly those that are very hot or undergoing extreme nuclear reactions, and can only be detected with specialized telescopes.

The radiation emitted by stars plays an important role in shaping the universe, influencing the formation and evolution of galaxies, stars, and planets. It is also the source of energy that powers life on Earth, as it is ultimately responsible for driving photosynthesis in plants and other organisms.

Here in the Question,

The intensity of a star's radiation can provide valuable information about its properties, such as its luminosity and surface temperature, distance estimation requires additional measurements and calculations.

One way to determine the distance to a star is through the method of parallax. This involves observing the apparent shift in a star's position against the background of more distant stars as the Earth moves in its orbit around the Sun. The amount of shift is measured and used to calculate the star's distance.

Another method is the use of standard candles, which are objects of known intrinsic brightness, such as certain types of supernovae or Cepheid variable stars. By comparing the observed brightness of a standard candle with its known intrinsic brightness, astronomers can determine its distance based on the inverse square law of radiation, which states that the intensity of radiation decreases with the square of the distance.

Therefore, while the intensity of a star's radiation provides important information about its properties, it is not sufficient to determine the star's distance, which requires additional measurements and calculations.

To learn about thermal energy click:

https://brainly.com/question/14193449

#SPJ2

Answer:

50.5 W

Explanation:

Using Ohm's Law, we can find the current through the circuit:

I = V/R

where I is the current, V is the voltage, and R is the resistance.

Substituting the given values, we get:

I = 120 V / 285 Ω

I ≈ 0.421 A

So the current through the circuit is approximately 0.421 A.

The power dissipated by the circuit can be found using the formula:

P = VI

where P is power, V is voltage, and I is current.

Substituting the given values, we get:

P = 120 V × 0.421 A

P ≈ 50.5 W

So the power dissipated by the circuit is approximately 50.5 W.

The strength of the magnetic field is 1.0 × 10⁻⁷ T.

A proton is propelled at 4.10 m/s perpendicular to a uniform magnetic field. If it experiences a magnetic force of 2.8 10 N, what is the strength of the magnetic field? (Express your answer using two significant figures.)The formula for magnetic force is given by:F = qvBsinθwhere:F is the magnetic force on a charged particle,q is the charge of the particle,v is the velocity of the particle,B is the magnetic field strength, andθ is the angle between the magnetic field and the velocity vector of the charged particle.Rearranging the formula to isolate the magnetic field strength, we get:B = F / qv sinθSubstituting the given values, we get:B = (2.8 × 10⁻¹⁰ N) / (1.6 × 10⁻¹⁹ C)(4.1 m/s) sin 90°B = 1.0 × 10⁻⁷ T (to two significant figures.

Learn more about magnetic field here:

https://brainly.com/question/29269991

#SPJ4

It is better to send 10,000 kW of electric power longdistances at 10,000 V rather than at 220 V because the insulation is more effective at high voltages more current is transmitted at high voltages.

Insulation is a material that is used to reduce the transfer of heat, sound, or electricity between two objects or spaces. In buildings, insulation is used to keep the indoor temperature stable by preventing heat from escaping during cold weather and from entering during hot weather. Insulation can be made from a variety of materials, such as fiberglass, cellulose, foam, and mineral wool.

Insulation works by trapping air in small pockets, which reduces the amount of heat that can pass through the material. The effectiveness of insulation is measured by its thermal resistance, or R-value, which indicates how well it can resist the flow of heat. In addition to its thermal properties, insulation can also provide soundproofing and electrical insulation.

To learn more about Insulation visit here:

brainly.com/question/30891246

#SPJ4

The figure that contains unconformities is the figure with both vertical and horizontal lines on it (top left).

In geology, an unconformity is a gap or break in the rock record that represents a period of time during which no new sediment was deposited, or the existing rock was eroded. Unconformities can be caused by a variety of geological processes, including tectonic uplift, erosion, sea level changes, and volcanic activity.

Unconformities are important features in geology because they provide clues to the geological history of an area. By studying the nature and location of unconformities, geologists can reconstruct the sequence of events that led to the formation and deformation of the rock layers, and can gain insights into the tectonic and environmental processes that shaped the Earth's surface over time.

Find out more on unconformity here: https://brainly.com/question/1578509

#SPJ1

The final speed of the rock is approximately 2.1 km/s.

We can use the formula for escape velocity to find the height of the rock above the asteroid's surface. The escape velocity is given by the formula:

v_esc = sqrt(2GM/R)

where G is the gravitational constant, M is the mass of the asteroid, and R is the radius of the asteroid.

Rearranging the formula,

R = GM/v_esc^2

Substituting the given values,

R = (6.67 x 10^-11 Nm^2/kg^2) x (10^15 kg) / (34 m/s)^2

R = 2.26 x 10^6 m

Therefore, the height of the rock above the asteroid's surface is:

h = R - radius of asteroid

h = 2.26 x 10^6 m - (radius of asteroid)

Now, we can use the conservation of energy to find the final speed of the rock:

(1/2)mv^2 = mgh

Solving for v,

v = sqrt(2gh)

Substituting the given values, we get:

v = sqrt(2 x 9.81 m/s^2 x (2.26 x 10^6 m - (radius of asteroid)))

Asteroid radius = 1 km,

v = sqrt(2 x 9.81 m/s^2 x (2.26 x 10^6 m - (1)))

v = 2.1 km.

To know more about escape speed, here

brainly.com/question/15052554

#SPJ4

--The complete question is, the escape speed from a very small asteroid is only 34 m/s. if you throw a rock away from the asteroid at a speed of 43 m/s and radius 1 km, what will be its final speed?--

Option 5: the main limitation on the efficiency of heat engines is due "friction in the moving parts of the engine can contribute to losses in efficiency. Lubrication and other measures can help to reduce these losses."

Heat engines, including internal combustion engines, are limited in their efficiency by the Second Law of Thermodynamics. This law states that in any energy transfer or conversion, some energy will be lost to the environment as waste heat. The first law of thermodynamics is also relevant here, as it states that energy cannot be created or destroyed, only transferred or converted from one form to another.

Environmental radical people, reaction forces due to Newton's Third Law, and other factors are not typically significant limitations on the efficiency of heat engines.

However, Option 5 is the correct answer "friction in the moving parts of the engine can contribute to losses in efficiency. Lubrication and other measures can help to reduce these losses."

For more such questions on friction

brainly.com/question/24338873

#SPJ11

To create a band pass filter from an inverting op amp configuration, one has to add a capacitor in parallel with the feedback resistor.

In an inverting op amp configuration, the input signal is applied to the inverting input terminal of the op amp through a resistor (R1), and the output signal is fed back to the inverting input terminal through a feedback resistor (R2).

To create a band pass filter, a capacitor is added in parallel with the feedback resistor. The capacitor blocks DC signals from the input, and allows AC signals to pass through to the output. The values of R1, R2, and the capacitor determine the center frequency and bandwidth of the filter.

Adding a capacitor in series with the input resistance would create a high pass filter, allowing only high frequency signals to pass through. Adding a capacitor in parallel with the input resistance would create a low pass filter, allowing only low frequency signals to pass through.

To know more about band pass filter, refer here:
https://brainly.com/question/27312673#
#SPJ11

The mass of the barbell is 10.965 kg if the clown retracts with a speed of 0.485 m/s and the barbell is hurled with a speed of 8.5 m/s.

If the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, the mass, in kilograms, of the barbell can be calculated as follows:mv = -mv′

Using the law of conservation of momentum,m1v1 + m2v2 = m1v'1 + m2v'2

Given that the clown recoils with a speed of 0.485 m/s and the barbell is thrown with a speed of 8.5 m/s, we can equate the momenta to get: (0.2 kg) (0.485 m/s) + (m2) (8.5 m/s) = 0.485 m/s(m2 + 0.2 kg)On simplification, the mass of the barbell, m2 = 10.965 kg.

Learn more about  speed here:

https://brainly.com/question/17661499

#SPJ11

In problem 5, the speed of the flake at the bottom of the bowl is (a) dependent on potential and kinetic energy, (b) same for a flake with twice the mass, and (c) increased due to initial downward speed.

To find the speed of the flake at the bottom of the bowl, we must consider the conservation of energy. Initially, the flake has potential energy (PE = mgh), which is converted into kinetic energy (KE = 1/2 mv^2) as it moves down the bowl.

Using the conservation of energy principle (PE_initial + KE_initial = PE_final + KE_final), we can solve for the final speed (v).

For part (b), the mass does not affect the final speed, as the potential energy is proportional to mass, and mass will cancel out when equating PE and KE.

For part (c), giving the flake an initial downward speed adds initial kinetic energy to the system. This will result in an increase in the final speed, as the flake has more energy to convert to kinetic energy as it reaches the bottom.

To know more about conservation of energy click on below link:

https://brainly.com/question/2137260#

#SPJ11

2. The ability of the heart, blood, blood vessels, and lungs to supply enough oxygen and necessary fuel to the muscles during long periods of physical activity - g. Cardiorespiratory Endurance.

What are the muscles?

Muscles are specialized tissues in the human body that are responsible for movement, stability, and maintaining posture. There are three types of muscles in the body: skeletal, cardiac, and smooth muscles.

3. The muscle's ability to move a joint through a full range of motion - c. Flexibility

पं - This word is not provided in the question.

4. The ability of a muscle or muscles to repeat a movement many times or hold a position without stopping to rest - a. Muscular Endurance

5. The ability of a muscle or muscles to push or pull with its total force - d. Muscular Strength

An activity that places an additional force against the muscle or muscle group - f. Resistance Training

To know more about muscles, visit:

https://brainly.com/question/9883108

#SPJ1

The pressure inside the sealed bag of potato chips at the factory is approximately 101,325 Pa.

To find the pressure inside the bag of potato chips in pascals (Pa), you need to convert the given pressure from mm Hg to pascals:

1. The given pressure at the factory is 761.3 mm Hg.
2. We need to convert this pressure to pascals.
3. Use the conversion factor: 1 mm Hg = 133.322 Pa.
4. Multiply the given pressure by the conversion factor: 761.3 mm Hg * 133.322 Pa/mm Hg.

So, the pressure inside the bag of potato chips in pascals is 101,325 Pa (rounded to the nearest whole number).

To know more about pressure click here:

https://brainly.com/question/14370233

#SPJ11

Answer:

I think the answer is False

Explanation: If you look at the meaning of Horticulture

"the art or practice of garden cultivation and management".

They manage plants but can sell them afterward.

The average net force exerted by the floor on the ball during the collision is 26 N.

Average The arithmetic mean is determined by adding a set of numbers, dividing by their count, and then taking the result. The average of 2, 3, 4, 5, 7, and 10 is 5, which is the outcome of 30 divided by 6.

The momentum equation can be used to determine the ball's shift in momentum:

Δp = m(v2 - v1)

Δp = (0.60 kg)(5.2 m/s - 0 m/s)

Δp = 3.12 kg m/s

Utilizing the impulse-momentum theory, we can determine the average net force the floor applied to the ball during the collision:

J = Δp

F_avg * t = Δp

F_avg = Δp / t

where t is the time duration of the collision, which is given as 0.12 seconds.

F_avg = Δp / t = (3.12 kg m/s) / (0.12 s)

F_avg = 26 N

To know more about net force visit:-

https://brainly.com/question/18109210

#SPJ1

The statement "the period of a circular motion is directly proportional to the frequency of that motion" is true. The circular motion is a movement in which an object moves in a circular path.

The direction of the circular motion is always changing, but the distance from the center remains constant. The period of circular motion is defined as the time it takes for one full revolution of the object, while the frequency of circular motion is defined as the number of complete revolutions the object makes in a given time interval.

This is because the period and frequency are inversely related to each other, meaning that if one value increases, the other value decreases, and vice versa.

This relationship can be represented by the equation: T = 1/f where T is the period and f is the frequency. Since this equation is inverse, it means that T and f are inversely proportional. Therefore, the statement is true.

To know more about frequency, refer here:

https://brainly.com/question/29739263#

#SPJ11

The change in volume of the metal block is approximately 7.5 x 10⁻⁸ m³ by using bulk modulus.

The change in volume of the metal block can be calculated using the bulk modulus of the material, which relates the change in pressure to the change in volume. The bulk modulus is a measure of the resistance of a material to compression. The change in volume can be given as:

ΔV = -V(ΔP / B)

where ΔP is the change in pressure, B is the bulk modulus, and V is the original volume of the block.

Therefore,

ΔV = -(2 x 10⁻³ m^3)(6.00 x 10⁴ Pa / B)

To find B for the metal block, we need to know the material it is made of. Let's assume it is made of steel, which has a bulk modulus of approximately 160 GPa (gigapascals) or 1.6 x 10¹¹ Pa.

Substituting B = 1.6 x 10¹¹ Pa, we get:

ΔV = -(2 x 10⁻³ )(6.00 x 10⁴ Pa / 1.6 x 10¹¹ Pa) ≈ -7.5 x 10⁻⁸ m³

Note that the negative sign indicates a fall in volume, as expected since the pressure increase would cause the metal block to compress slightly.

Therefore, the change in volume of the metal block is approximately 7.5 x 10⁻⁸ m³.

To learn more about bulk modulus, refer to:

https://brainly.com/question/10869375

#SPJ4