A laboratory group measures an excess of a volatile liquid. They add this to an empty flask with a volume of 66 mL. They heat the sample to 86.9 degrees Celcius until all the liquid is vaporized. The pressure in the lab is 0.987 atm. If 0.287 grams of volatile liquid were left in the flask, what was the molar mass of the compound?

Answers

Answer 1

Answer:

130.159

Explanation:

P=0.987

V=66ml =66/1000=0.066 L

n/moles= ?

R=0.08206

T=86.9+273.15=360.5 K

Formula PV=RnT

n =PV/TR

n=(0.987 * 0.066)/(360.05 * 0.08206) = 0.002205

Now to obtain molar mass  you divide grams by mol.

0.287/0.002205 = 130.159


Related Questions

HELP!!! WILL MARK BRAINLIEST!!

The diagram below shows different positions of Earth and Mars around the sun.
Based on the diagram, which of these statements is correct?

Earth covers different areas in the same amount of time at position A and position B.
Earth covers a greater area in position A than in position B in the same amount of time.
Mars covers a greater area in position A than in position B in the same amount of time.
Mars covers the same area in the same amount of time at position A and position B.

Answers

Answer:

Earth covers a greater area in position A than in position B in the same amount of time.

Explanation:

Based on the diagram that shows different positions of Earth and Mars around the sun, it seems that this statement is correct:

Earth covers a greater area in position A than in position B in the same amount of time. (Covers as I understood it means "overshadowing" Mars)

2.Uranium-235 has a half-life of about 700 million years. If 1 kg of U-235 is put on a shelf in
a laboratory, how much of it will be left after 700 million years? (5 points)

Answers

Answer:

.5 kg

Explanation:

At the start of Uranium-235 there is a total of 1 kg. Uranium-235 half life is 700 million years, take 1kg ÷2 = 0.5kg after 1 half life.

Let's say another 700 million years go by that means you take 0.5kg and divide that by 2.

0.5kg÷2= 0.25 kg is left after 2 half lives.

Hope this helps good luck!

A tank of bromine gas is initially at a pressure of 5.6 atm, a temperature of 67°C, and has a volume of 97 L. The tank is expanded to 100 L and has a new pressure of 8 atm.

What is the new temperature of the gas in Kelvin?

Answers

The new temperature of the bromine gas as the tank is expanded to the given volume and pressure is 500.96 Kelvin.

Combined gas law

Combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that "the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.

It is expressed as;

P₁V₁/T₁ = P₂V₂/T₂

Given the data in the question;

Initial volume V₁ = 97LInitial pressure P₁ = 5.6atmInitial temperature T₁ = 67°C = 340.15KFinal volume V₂ = 100LFinal pressure P₂ = 8.0atmFinal temperature T₂ = ?

To calculate the new temperature the gas, we subtsitute our given values into the expression above.

P₁V₁/T₁ = P₂V₂/T₂

P₁V₁T₂ = P₂V₂T₁

T₂ = P₂V₂T₁/P₁V₁

T₂ = ( 8.0atm × 100L × 340.15K ) / ( 5.6atm × 97L )

T₂ = 272120LatmK / 543.2Latm

T₂ = 500.96K

Therefore, the new temperature of the bromine gas as the tank is expanded to the given volume and pressure is 500.96 Kelvin.

Learn more about the combined gas law here: brainly.com/question/25944795

What are some characteristics of Nonmetals?

Answers

Answer:

Insulators

Explanation:

They could work as Insulators

Hope it Helps

A typical car engine produces 44,000 kJ of heat in an hour. The cooling system has a capacity of 8.40 L and is filled with a 50:50 mixture of anti-freeze (specific heat capacity of 8.37 J/g-oC, density of 1.038 g/mL). In maintaining a constant engine temperature, the cooling system temperature increased from 95oC to 110oC. (Assume this is within allowable limits.) How many times did the cooling system turn over its volume of anti-freeze to maintain the engine temperature during its hour of operation? Show your work. (Assume that only the cooling system removes heat from the engine and no other mechanism of heat removal is involved.)

Answers

Answer:

"The Circuit" by author Francisco Jimenez, tells the story of Panchito and his experiences on a new country, having to deal with learning a second language and adapting to a new culture and environment. Even if you had not been in a similar situation as Panchito, you could connect his stories to your personal experiences at school in many ways. Maybe, the first classes of spanish or french were difficult to you as you could not understand all the words the teacher was saying, but as you were learning things were easier for you. Or you can connect Panchito's experiences by writing about that time in school you were not afraid of asking for help when you had to deal with a difficult situation 

Antifreeze is the coolant used in car engines that regulates the temperature. The cooling system turns over around 40 times to regulate the temperature.

What is heat?

Heat is the product of the mass, temperature change, and the specific heat of the substance.

Given,

The heat of surroundings = 44000 kJ

Mass of the substance = 8719 gm

Specific heat = 8.37 J/g degrees celsius

Change in temperature = 15 degrees celsius

Q system is calculated as:

8719 × 8.37 × 15

= 1095 kJ

The number of antifreeze is calculated as:

Δ H ÷ Q system = 44000 ÷ 1095

= 40

Therefore, 40 times the cooling system was turned over.

Learn more about antifreeze here:

https://brainly.com/question/4081433

#SPJ2

what is the chemical formula for flourine?

Answers

Answer:

H2(g) + F2(g) ----> 2HF(g)

Answer = F2

how many Aluminum atoms are in Al2O3

a. 3

b. 2

c. 5

d. 1

Answers

Given the data from the question, the number of aluminum atoms in aluminum oxide, Al₂O₃ is 2 (Option B)

Composition of aluminum oxide, Al₂O₃

From the formula of the compound, Al₂O₃ we see that the compound is composed of

Aluminum Oxygen

How to determine the number of aluminum atoms Formula of compound = Al₂O₃Number of oxygen atoms j= 3 × 1 = 3Number of aluminum atoms = 2 × 1 = 2

From the above, we can conclude that Al₂O₃ contains 2 atoms of aluminum.

Learn more about mass composition:

https://brainly.com/question/11617445

Two identical automobiles are racing towards each other. One vehicle is going 30 mph, the other is going 60 mph. What will happen when the two vehicles collide, and why? What would happen if the two cars were moving at identical speeds?

Answers

When the two vehicles collide, then vehicle with slow speed will pushes back.

How we define speed?

Speed of any moving body is define as the distance travelled by that body in per unit of time.

As it is mentioned that one car has a speed of 30 mph and another one has a speed of 60mph, if both of these cars get collide then the car with high speed pushed back the car with low speed.

Hence the car with slow speed pushed back.

To know more about speed, visit the below link:
https://brainly.com/question/6504879

#SPJ1

How many moles of potassium chloride will be produced from 175 g of potassium chlorate?

Answers

Answer:

3.8 g

Explanation:

yan lng po maitutulong ko

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 2.34moles of potassium chloride will be produced from 175 g of potassium chlorate.

What is mole?

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

mole =given mass ÷ molar mass

Molar mass of potassium chloride= 74.55 g/mol

Mass of potassium chloride= 175 g

Substituting the values in above formula we get

mole =175 g ÷  74.55 g/mol

moles of potassium chloride=2.34moles

Therefore, 2.34moles  of potassium chloride will be produced from 175 g of potassium chlorate.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2

A gas containing 80% CH4 and 20% He is sent through a quart/ diffusion tube (see Figure P8.8) to recover the helium, Twenty percent by weight of the original gas is recovered, and its composition is 50% He. Calculate the composition of the waste gas if 100 kg moles of gas are processed per minute.

Answers

For a gas containing 80% CH4 and 20% He is sent through a quart diffusion tube, the composition is mathematically given as

%He=12.5%

%CH4=87.5%

What is the composition of the waste gas if 100 kg moles of gas are processed per minute?

Generally, the equation for the Material balance  is mathematically given as

F=R+W

Therefore

100=0.20*1000+W

W=80kmol/min

In conclusion, waste gas compose

2.0/100*100=50/100*20+%*80

Hence

%He=12.5%

%CH4=87.5%

Read more about Chemical reaction

https://brainly.com/question/16416932

An excess of nitrogen reacts with 32.6 grams of hydrogen. What volume of ammonia is produced at STP? N2(g) + 3H2(g)  2NH3(g)?​

Answers

to find:

the volume of ammonia produced at STP.

solution:

Mass of hydrogen is 32.6g

Molar mass of H2 = 2 g/mol

Moles of H = 32.6g/2g/mol = 16.3mol

N2(g) + 3H2(g) —-> 2NH3(g)

The Mole ratio of H to NH3 is 3 : 1

32.6 mole of H = 1/3 x 16.3= 10.87 mol = 5.43mol

Moles of NH3 = 5.43mol

At STP moles = volume/molar volume, but molar volume = 22.4L/mol

Moles = volume/molar volume, volume = moles X molar volume

Volume = 5.43 mol x 22.4L/mol

= 121.63 L

Volume of NH3 = 121.63L


A liquid has a mass of 3.35 g and volume of 5 mL. What is its density?*
D =
mass
volume

Answers

Explanation:

density= mass × volume

3.35×5

=. 16 .75

A student diluted 10.0 milliliters (mL) of a 9.00 Molar (M) HCl solution in order to prepare a 0.50 M solution for his organic extraction analysis.What quantity of water, in mL, was added to make the 0.50M HCl solution?

A: 150
B: 160
C: 170
D: 180

Answers

The quantity of water in mL that was added to make the solution is 170 mL (option C)

How to determine the volume of the diluted solution Volume of stock solution (V₁) = 10 mL Molarity of stock solution (M₁) = 9 MMolarity of diluted solution (M₂) = 0.5 MVolume of diluted solution (V₂) =?

M₁V₁ = M₂V₂

9 × 10 = 0.5 × V₂

90 = 0.5 × V₂

Divide both side by 0.5

V₂ = 90 / 0.5

V₂ = 180 mL

How to determine the volume of the water Volume of stock solution (V₁) = 10 mL Volume of diluted solution (V₂) = 180 mL Volume of water added =?

Volume of water added = V₂ – V₁

Volume of water added = 180 – 10

Volume of water added = 170 mL

Learn more about dilution:

https://brainly.com/question/15022582

Give the name for the compounds below

Answers

Answer:

The R-O-R Chain

Explanation:

Please give me brainliest! Im so sorry if this is incorrect I really tried... -_- ;-;

I hope this helps . You could also check on a website called chegg

If 3.00 moles of FeCl3 are dissolved in water to make 5.00 L of solution, what is the molarity of the solution?

Answers

Answer:

M = [tex]\frac{3}{5}[/tex] or 0.60 M

Explanation:

Data:

Moles = 3.00 molLiters = 5.00 L

Wanted:

Molarity

Equation:

M = [tex]\frac{mol}{L}[/tex]

Solution:

M = [tex]\frac{3.00 mol}{5.00 L}[/tex]M = [tex]\frac{3}{5}[/tex] or 0.60 M

Note:

The answer is not in a correct significant figure.

Get Brainliest quick!

In this food web, which organism eats meat-eaters?


A: 1


B: 6


C: 4


D: 3

Answers

Answer:

B.6

Explanation:

Organism is at the top and does not get eaten by anything else. That is why I think the correct answer is b :)

Have an amazing day!!

Please rate and mark brainliest!

Question 9 of 30
The average atomic mass of boron is 10.81 amu. Based on the atomic
masses of the two isotopes of boron, how do the relative abundances of the
isotopes compare?
Isotope
Atomic mass (amu)
B-10
10.013
B-11
11.009
O A. B-11 is almost twice as abundant as B-10.
B. B-10 and B-11 are equally abundant.
O C. B-10 is twice as abundant as B-11.
D. B-11 is more than twice as abundant as B-10.

Answers

Answer: D

Explanation:

Based on the atomic masses of the two isotopes of boron, B-11 is more than twice as abundant as B-10. The correct option is option D.

What is relative abundance?

The reason why some isotopes have a greater prevalence naturally common on Earth then others has something to do with the simple fact that various isotopes have varying relative abundances.

The proportion of a given isotope with a particular atomic mass that exists in nature is known as its relative abundance. Isotopes are different chemical elements that differ in nucleon number and neutron number, respectively. The average atomic mass of boron is 10.81 amu. Based on the atomic masses of the two isotopes of boron, B-11 is more than twice as abundant as B-10.

Therefore,  B-11 is more than twice as abundant as B-10. The correct option is option D.

To know more about relative abundance, here:

https://brainly.com/question/1594226

#SPJ7

I need help finding arm

Answers

Answer:

line 15 is were you can find the a then you look around for the r but as a heads up the m thats supposed to be there was actually inverted into a w in theory it must have been misprinted.

Explanation:

why is it difficult for non metals to form positive ions

Answers

Answer:

Because the non-metal comes from the right hand side of the Periodic Table as we face it, its nuclear charge is very poorly shielded by its INCOMPLETE valence electronic shell, and this results in the well-known contraction of atomic radii across the Table from left to right.

Explanation:

Non metals usually gain electrons so they have more electron in the shells than protons in nucleus and hence they form negative ions. However, metals usually lose electron so they have more protons in nucleus than electrons in shells and hence they form positive ions.

Part 1
Titrant (NaOH) concentration: 0.1 m NaOH

Vinegar volume: 2.0 mL vinegar

Initial buret reading (initial NaOH volume): 0.0 mL

Final buret reading (final NaOH volume): 17.7 mL

Calculate the moles of NaOH using the volume and molarity of NaOH.

Show your
work. moles = molarity. volume (in Liters).


1.77 moles
17.7 moles
0.177 moles
0.00177 moles

Part 2

Answers

The moles of NaOH used in the titration would be 0.00177 moles while the molarity of the vinegar will be 0.885 M

Titration calculation

Recall that: mole = molarity x volume

In this case, the molarity of the NaOH= 0.1 M

Volume of NaOH = 17.7 - 0.0 = 17.7 mL

Mole of NaOH used = 0.1 x 17.7/1000 = 0.00177 moles.

Since NaOH and vinegar have 1:1 mole ratio, the mole of vinegar will also be 0.00177 moles.

Molarity of vinegar = mole/volume = 0.00177/0.002 = 0.885 M

More on titration calculations can be found here: https://brainly.com/question/9226000

carbon dioxide gas is not important for life. Do you agree or disagree?Explain your answer.

Answers

Answer:

Disagree carbon dioxide is one of the most important elements as it is present in nearly everywhere in our environment. We are also made from carbon. Carbon dioxide is present in our oceans. It is the most stable element in the periodic table therefore all element are compared to carbon-12 to calculate the relative mass of it from the element's isotopes. It is so important that a slight increase of CO2 production and other greenhouse gas production has the Earth become warmer causing it to have drastically impact our environment and also affecting our future.

In an ecosystem ,carbon dioxide is important so as to maintain the carbon foot prints.

What is an ecosystem?

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/13979184

#SPJ2

Based on the differences in electronegativities, with which atom is francium (Fr) most likely to form an ionic bond?

A. Fr-Cl = 2.46
B. Fr-Se =1.76
C. Fr- At = 1.50
D. Fr-l =1.96

Answers

An ionic bond will be most likely formed between francium and chlorine having an electronegativity difference of 2.46.

What is is an ionic bond?

An ionic bond is formed between to atoms that have a high difference in electronegativity between them. We now have to look out for the atoms that have a very high electronegativity difference. That pair is most likely to form an ionic bond.

Hence, an ionic bond will be most likely formed between francium and chlorine having an electronegativity difference of 2.46.

Learn more about electronegativity: https://brainly.com/question/2060520

Suppose that the pressure of 1.00L of gas is 500mmHg when
the temperature is 200K. At what temperature is the Volume 2.00L
and the pressure 0.750 atm?

Answers

Answer:

456 K

Explanation:

PV = nRT

PV/ T = nR       since nR is constant for this scenario

P1 V1 /T1   =  P2 V2 / T2

500 * 1 / 200 =  (760*.75)  *2 /T2    Solve for T2 =456 K

(Note that .750 atm =   760 mmHg * .75 )

What is the correct formula for dinitrogen hexafluoride?

Answers

Answer:

The correct formula for dinitrogen hexafluoride is Memorize the prefixes for number of atoms, Write the chemical symbol for the first element, add the number of atoms present as a subscript, Write the chemical symbol for the second element, Add the number of atoms present as a subscript, Practice with some examples.

Explanation:

1: Memorize the prefixes for number of atoms. In naming compounds, Greek prefixes are used to indicate the number of atoms present for each element. Covalent compounds are written out as molecular formulas due to the fact that each compound is a distinct, separate molecule.[1] Covalent compounds have the first element written out completely while the second element is named with the suffix "ide." For example, diphosphorus trisulfide has a chemical formula of P2S3. Below are the prefixes for 1-10:

1: Mono-

2: Di-

3: Tri-

4: Tetra-

5: Penta-

6: Hexa-

7: Hepta-

8: Octa-

9: Nona-

10: Deca-

2: Write the chemical symbol for the first element. When a compound has been written out, you must identify the elements and know their chemical symbols. The first element written is "first name" of the compound. Use the periodic table to find the chemical symbol for the element. For example: Dinitrogen hexafluoride. The first element is nitrogen and the chemical symbol for nitrogen is N.

3: Add the number of atoms as a subscript. To identify the number of atoms present for each element, you simply need to look at the prefix of the element. Memorizing the Greek prefixes will help you to be able to write chemical formulas quickly without looking anything up. For example: Dinitrogen has a the prefix "di-" which means 2; therefore, there are 2 atoms of nitrogen present. Write dinitrogen as N2.

4: Write the chemical symbol for the second element. The second element is the "last name" of the compound and will follow the first element. For covalent compounds, the element name will have a suffix of "-ide" instead of the normal ending of the element. For example: Dinitrogen hexafluoride. The second element is fluorine. Simply replace the "ide" ending with the actual element name. The chemical symbol for fluorine is F.

5: Add the number of atoms present as a subscript. As you did with the first element, identify the number of atoms present in the second element by reading the prefix. Using this prefix, write the number of atoms as a subscript to the right of the chemical symbol. For example: Hexafluoride has a prefix of "hexa-" which means 6; therefore, there are 6 atoms of fluorine present. Write hexafluoride as F6. The final chemical formula for dinitrogen hexafluoride is N2F6.

6: Practice with some examples. When first learning chemistry, there is a lot of memorization involved. It is kind of like learning a new language. The more examples you practice with, the easier it will be to decipher chemical formulas in the future and learn the language of chemistry. Sulfur dioxide: SO2 Carbon tetrabromide: CBr4 Diphosphorus pentoxide: P2O5

Carbonates are typically insoluble, but one exception would be a carbonate containing what kind of cation? a) ammonium b) a transition metal c) a group two metal lead

Answers

For a carbonate containing a kind of cation, we have that Option 1 is the correct answer: ammonium.

What are Carbonates?

Generally, Any of two families of chemical substances generated from carbonic acid or carbon dioxide is referred to as carbonate.

In conclusion, Sodium, potassium, and ammonium are the three carbonates that are soluble.

Read more about Compound

https://brainly.com/question/704297

Show how you would convert 3-cyclopentylbutanal to a carboxylic acid.​

Answers

Conversion of 3-cyclopentylbutanal to a carboxylic acid will be made possible through oxidation.

What is Oxidation?

This is the process in a chemical reaction which involves the gain of oxygen atoms.

3-cyclopentyl butanal  is oxidized to carboxylic acids using potassium dichromate(VI) solution which turns green in the presence of dilute sulfuric acid.

Read more about Oxidation here https://brainly.com/question/25886015

What is one way that plants can harm the environment? Being a food source Blocking sunlight Giving off oxygen Providing shelter

Answers

Answer:

Your answer is B

Explanation:

How much nuclear fuel produces as much energy as 2 to 3 million kilograms of coal?

1 thousand kilograms

1 million kilograms

1 kilogram

10 kilograms

Answers

Answer:

1 kilogram of nuclear fuel

Explanation:

Answer:

1 Kilogram.

Explanation:

I took the test and I got an A. Really hope this helps you, friend!

PLEASE HELP!!!
Using the rules that you learned during the session, what is the answer to the following question?

55.78 * 23.7

Answers
1,321.986
1,321.99
1,322
1,320

Answers

Answer:

  (d)  1,320

Explanation:

You want the product 55.78 × 23.7 rounded appropriately.

Significant figures

When a number has both an integer part and a decimal fraction, all of the digits are significant. Here, that means the first number has 4 significant figures, and the second number has 3 significant figures.

The number of significant figures in a product or quotient will be the least of the numbers of significant figures of the contributors. Here, the product can only have 3 significant figures.

  55.78 × 23.7 = 1321.986 ≈ 1320 . . . . rounded to 3 sf

Using the rules for significant figures, the answer is 1320.

__

Additional comment

Generally, the rules for significant figures apply to quantities derived from measurements. They can also be applied to estimates, where the result of computation using numbers of different precision cannot have any more accuracy than the least precise contributor.

The other useful rule in this process is that the rounding is saved for the final answer. Intermediate results should be carried to the full precision available.

<95141404393>

How much energy is needed to completely boil a 5.05g sample of water?

Answers

The energy required to completely boil a 5.05 g-sample of liquid water at its boiling point is 2.73 kcal.

What is boiling?

Boiling is the process in which, upon absorbing energy in the form of heat, a substance goes from the liquid state to the gaseous state.

We have a 5.05 g-sample of liquid water. We can calculate the heat required to completely boil it using the following expression.

Q = ΔH°vap × m

Q = 0.540 kcal/g × 5.05 g = 2.73 kcal

where,

Q is the heat absorbed.ΔH°vap is the enthalpy of vaporization.m is the mass.

The energy required to completely boil a 5.05 g-sample of liquid water at its boiling point is 2.73 kcal.

Learn more about boiling here: https://brainly.com/question/40140

Other Questions
How can peoples understanding of disabilities be increased? in my limb difference doesn't define me. What was the most likely motivation for iraqis to set fire to oil wells in kuwait? they hoped to set off explosions to kill enemy troops and win the war. They wanted revenge when they were forced to retreat from kuwait. They wanted to deplete kuwaits oil reserves so no one could use them. They hoped to frighten the kuwaiti government into surrendering to iraq. how bias is used to meet the overall purpose of "Tear down this wall" speech. The ocean suddenly "grows grey with fear" is an example of what types of figurative language?a. alliteration and hyperboleb. alliteration and simile Which type of volcano forms when lava comes up out of the ground for a long period of time?. How might immigration affect genetic equilibrium? The first part of the cell cycle is called _____________. Evaluate the sum of the finite geometric series -5- 10 - 20 - 40 - . . . - 2560 What is the slope ofthe line?Give your answer asa fraction in simplestform. b) Do all waves require a medium? Explain. (2 points) I need help with this Please help I will giveBRAINLY5 STARSand a THANKS PLEASEEE HELPPP 30 POINTSSS!!! Professor Plum is putting a brick border around his irregular shaped garden. Before installingthe border, Professor Plum must cut the bricks to fit the angles of the garden. Use the givenmeasures to answer the question. = (6) = (3 + 45) = (7) = (4 + 2) = (2 + 15) = ( 9)What are the angle measures of each vertex of the garden? Show your work. how do you get from 8.05 to 8.50 to 9.00? A horticulturalist wants to produce geraniums with specific characteristics. She knows that the trait of red flowers is governed by the allele R(RR and Rr) and the trait of white flowers is governed by the allele r(rr).The horticulturalist plans to cross a geranium that is true-breeding for red flowers with a geranium that is true-breeding for white flowers.Which Punnett square best describes this cross? R r R RR Rr r Rr rr r r R Rr Rr r rr rr r r R Rr Rr R Rr RrBirth and Death rate table. In year 0, birth rate is 0.25 and death rate is 0.5. In year 1, birth rate is 0.3 and death rate is 0.4. In year 2, birth rate is 0.4 and death rate is 0.2. In year 3, birth rate is 0.5 and death rate is 0.15. In year 4, birth rate is 0.5 and death rate is 0.2. In year 5, birth rate is 0.4 and death rate is 0.3.a graph showing birth and death rates per thousand people from pre-industrial to post-industrial timesIllustration of food web including a relationship between green plants, a mouse, a rabbit, a goat, an owl, a snake, a wild cat, a jackal, a kite, and a lion.Four graphs A, B, C and D. Each graph is a line that occupies a square. The left and right sides of the graph touch the x axis. Each graph has a different shape, but the space under the line remains the same. Graph A. Solid line symmetrical bell-shaped curve. Graph B. Dotted line symmetrical bell-shaped curve superimposed on a solid asymmetrical curve that leans to the right of the dotted curve. Graph C. Dotted line symmetrical bell-shaped curve superimposed on a solid curve. The solid curve is symmetrical. It goes up on both ends to form two humps and it is lower in the middle. The solid curve looks like the letter M. Graph D. Dotted line symmetrical bell-shaped curve superimposed on a symmetrical curve that is narrower and taller than the dotted line curve.A phylogenetic tree showing the evolutionary relationships between, from left to right, proteobacteria, chlamydia, spirochetes, gram-positive bacteria, cyanobacteria, euryarchaeota, crenarchaeota, diplomonadida, parabasala, euglenozoa, alveolata, stramenopila, rhodophyta, chlorophyta, plantae, mycetozoa, fungi, and animaliaTree diagram with five levels, showing genetics of Darwin finches. Starting from bottom, level one shows Common ancestor from South American mainland. Level two shows Ground, Tree, and Warbler finches with their Genuses as Geospiza, Camarhynchus, and Certhidea respectively. Level three shows Seed eaters, Sharp-beaked ground finch or G difficilis, Cactus flower eaters, Bud eater, and Insect eaters. Level four shows Large ground finch or G magnirostris, Small ground finch or G fuliginosa, Cactus ground finch or G scandens, Small tree finch or C parvulus, Medium tree finch or C pauper, and Woodpecker finch or C pallidus. Level five shows Medium ground finch or G fortis, Large cactus ground finch or G conirostris, Vegetarian finch or C crassirostris, Large tree finch or C psittacula, Mangrove finch or C heliobates, Green warbler finch or Certhidea olivacea, and Gray warbler finch or Certhidea fusca.A diagram of the cycle of photosynthesis and cellular respiration, with the steps labeled A, B, C, and D.Stage of mitosis showing split chromosomes and the sister chromatids on the opposite poles of the cellAssessment navigation Which following is an opinion about friction Calculate the perimeter of the shape below Tolerance is often a condition that follows repeated exposure to a drug. In this experiment, how did the researchers develop tolerance in the rats? i. By selecting rats with exposure to heroin from other experiments ii. By repeatedly injecting the rats with heroin during the pretest sessions iii. By repeatedly injecting the rats with heroin during the test sessions PLSSSSSS HELP ME ILL GIVE YOU BRAINIEST!!! Please help me it's very important that this gets done asap