The MATLAB code successfully creates a 2-D array to store the percentage values of ingredients for the five desserts. By multiplying the percentages with the weight of 1 kg, we obtain the total grams needed for each ingredient in each dessert.
1. The desserts are named FruityCake, ChocolateCookies, Cheesecake, LotusCravings, and VanillaIce. Each dessert consists of the same set of ingredients: Fruits, Chocolate, Biscuits, Vanilla, Cream, and Flour. The percentages of these ingredients vary for each dessert.
2. To solve the problem, we can create a 2-D array in MATLAB to store the percentage values. Each row of the array will correspond to a dessert, and each column will represent a specific ingredient. We can then calculate the total amount of grams needed for each ingredient to produce 1 kg of each dessert.
3. The computed results are as follows: for FruityCake, we need 520.00 g of Fruits, 910.00 g of Chocolate, 390.00 g of Biscuits, 760.00 g of Vanilla, 560.00 g of Cream, and 1860.00 g of Flour. In summary, the calculated values reveal the specific amounts of each ingredient required to produce 1 kg of each dessert.
learn more about array here: brainly.com/question/30757831
#SPJ11
Consider the following array (!) x=[-10,-4,3,2,1.5,6,8,9,0,11,12,2.5,3.3,7,-4]. Use the logical operators to extract the elements that are greater than 3 and less than or equal to 9 from x. Store the result under the name
To extract the elements greater than 3 and less than or equal to 9 from the given array x, we can use logical indexing. We can create a logical array with the same size as x, where the values are true for the elements that satisfy the condition and false for those that don't.
Then, we can use this logical array to extract the required elements from x. Here's how to do it in MATLAB:>> x = [-10,-4,3,2,1.5,6,8,9,0,11,12,2.5,3.3,7,-4];>> ind = x > 3 & x <= 9; % logical indexing>> result = x(ind); % extract required elements>> result % display the resultans = 6 8 9 7The logical operator & is used to combine the two conditions, i.e., x > 3 and x <= 9. This ensures that only the elements that satisfy both conditions are selected. The resulting logical array ind is [0 0 0 0 0 1 1 1 0 0 0 0 1 1 0], which means that the elements at positions 6, 7, 8, 13, and 14 satisfy the conditions. These elements are extracted from x using logical indexing, and stored in the variable result. Finally, the result is displayed on the screen.
To know more aboutt elements visit:
https://brainly.com/question/12906315
#SPJ11
Please Answer thoughtfully and thoroughly. Thank you.
Question: Determine what Duty Cycle is set by this code:
import time from machine import Pin, PWM DUTY_CYCLE_COUNT=const(int(2**16 / 2)) pwm = PWM(Pin(22, Pin.OUT)) pwm.duty_u16(DUTY_CYCLE_COUNT)
Note: Keep in mind the answer is NOT 2^16/2 and is NOT 32768. The answer could be in percentage from 50%, 25%, 10%, 100%, or we can't tell.
The duty cycle set by the given code cannot be determined based on the information provided. It could be any value between 0% and 100%, depending on the specific implementation of the PWM module and the hardware configuration. Without additional details or documentation, it is not possible to determine the exact duty cycle set by the code.
The code initializes a Pulse Width Modulation (PWM) signal on pin 22 using the machine.PWM class. The duty cycle of a PWM signal represents the percentage of time the signal is high compared to its total period. In this case, the duty cycle is set using the `duty_u16()` method, which expects a 16-bit unsigned integer value.
However, the specific value passed to `duty_u16()` is not provided in the code snippet, making it impossible to determine the exact duty cycle.
To learn more about Pulse Width Modulation - brainly.com/question/29358007
#SPJ11
Consider the predicate language where:
PP is a unary predicate symbol, where P(x)P(x) means that "xx is a prime number",
<< is a binary predicate symbol, where x
Select the formula that corresponds to the following statement:
"Between any two prime numbers there is another prime number."
(It is not important whether or not the above statement is true with respect to the above interpretation.)
Select one:
∀x(P(x)∧∃y(x
∀x∀y(P(x)∧P(y)→¬(x
∃x(P(x)∧∀y(x
∀x(P(x)→∃y(x
∀x∀y(P(x)∧P(y)∧(x
Consider the predicate language where: PP is a unary predicate symbol, where P(x) means that "x is a prime number", << is a binary predicate symbol, where x< x ∧ z > y ∧ P(z))]∀x∀y(P(x) ∧ P(y) → ∃z(P(z) ∧ x < z ∧ z < y)) So, the correct answer is: ∀x∀y(P(x) ∧ P(y) → ∃z(P(z) ∧ x < z ∧ z < y))
Predicate language is the language of mathematical logic. The predicate language is used to make statements about the properties of objects in mathematics. According to the given question, the formula that corresponds to the given statement "Between any two prime numbers there is another prime number." is, ∀x∀y(P(x) ∧ P(y) → ∃z(P(z) ∧ x < z ∧ z < y)). The symbol ∧ means AND, and → means implies. P(x) denotes "x is prime", so P(y) means "y is prime". The quantifier ∀ denotes "for all". Thus, the statement ∀x∀y(P(x) ∧ P(y) → ∃z(P(z) ∧ x < z ∧ z < y)) means that for all x and y, if x and y are both prime, then there exists a z that is between x and y (x < z < y) and z is prime. So, the correct answer is: ∀x∀y(P(x) ∧ P(y) → ∃z(P(z) ∧ x < z ∧ z < y)).
To learn more about predicate, visit:
https://brainly.com/question/30640871
#SPJ11
a) Design a interface Base that contains methods setText to set the text of question, setAnswer to set the answer of question, checkAnswer to check a given response for correctness, and display to display the text of question. Save it as Base.java.
We can use an approach that involves generating prime numbers up to X using a prime number generator algorithm such as the Sieve of Eratosthenes. Once we have the prime numbers, we can iterate through all conditions provided.
The prime sum of the nth power refers to the sum of prime numbers raised to the power of n. For a given input X, we need to find all numbers A with Z digits (between 0 and X) that can be expressed as the sum of prime numbers raised to the power of n. Once we have the prime numbers, we can iterate through all possible combinations of prime numbers raised to the power of n to check if their sum matches A.
Learn more about algorithm here: brainly.com/question/21172316
#SPJ11
Suppose you trained your logistic regression classifier which takes an image as input and outputs either dog (class 0) or cat (class 1). Given the input image x, the hypothesis outputs 0.2. What is the probability that the input image corresponds to a dog?
Suppose that you trained your logistic regression classifier that takes an image as input and outputs either a dog (class 0) or a cat (class 1). The hypothesis produces 0.2 as output. Therefore, we have to find the probability that the input image corresponds to a dog.The logistic regression output is calculated as follows:$$h_\theta(x) = \frac{1}{1+e^{-\theta^Tx}}$$.
In this case, the value of $h_\theta(x)$ is 0.2. We want to find the probability that the input image is a dog. Mathematically, this is expressed as $P(y=0|x)$, which means the probability of outputting class 0 (dog) given input x.The formula for the conditional probability is given as:$$P(y=0|x) = \frac{P(x|y=0)P(y=0)}{P(x|y=0)P(y=0) + P(x|y=1)P(y=1)}$$where $P(y=0)$ and $P(y=1)$ are the prior probabilities of the classes (in this case, the probabilities of a dog and a cat), and $P(x|y=0)$ and $P(x|y=1)$ are the likelihoods of the input image given the respective classes.
To find $P(y=0|x)$, we need to find the values of the four probabilities in the above formula. The prior probabilities are not given in the question, so we will assume that they are equal (i.e., $P(y=0) = P(y=1) = 0.5$). Now we need to find the likelihoods:$P(x|y=0)$ is the probability of the input image given that it is a dog. Similarly, $P(x|y=1)$ is the probability of the input image given that it is a cat. These probabilities are not given in the question, and we cannot calculate them from the information given. We need to have access to the training data and the parameters of the logistic regression model to compute these probabilities.Therefore, without the knowledge of likelihoods, we cannot determine the exact probability that the input image corresponds to a dog.
To know more about regression visit:
https://brainly.com/question/32505018
#SPJ11
You course help/ask sites for help. Reference sites are Each question is worth 1.6 points. Multiple choice questions with square check-boxes have more than one correct answer. Mult round radio-buttons have only one correct answer. Any code fragments you are asked to analyze are assumed to be contained in a program that variables defined and/or assigned. None of these questions is intended to be a trick. They pose straightforward questions about Programming Using C++ concepts and rules taught in this course. Question 6 What is the output when the following code fragment is executed? char ch; char title'] = "Titanic"; ch = title[1] title[3] =ch; cout << title << endl; O Titinic O TiTanic Titanic Previous Not ere to search
The output of the corrected code will be: "Tiianic". The code fragment provided has a syntax error. It seems that there is a typo in the code where the closing square bracket "]" is missing in the assignment statement.
Additionally, the variable "title" is not declared. To fix the syntax error and make the code executable, you can make the following changes:
#include <iostream>
#include <string>
int main() {
char ch;
std::string title = "Titanic";
ch = title[1];
title[3] = ch;
std::cout << title << std::endl;
return 0;
}
Now, let's analyze the corrected code:
char ch;: Declares a character variable ch.std::string title = "Titanic";: Declares and initializes a string variable title with the value "Titanic".ch = title[1];: Assigns the character at index 1 (value 'i') of the string title to the variable ch.title[3] = ch;: Assigns the value of ch to the character at index 3 of the string title.std::cout << title << std::endl;: Prints the value of title to the console.The output of the corrected code will be: "Tiianic".To know more about code click here
brainly.com/question/17293834
#SPJ11
visual studio c# console
This project uses an array to track the results of rolling 2 dice. Make sure you read the file about Random Numbers before you work on this project.
If the dice have 6 sides each, then rolling 2 dice can produce a total from 2 (a 1 on each dice) to 12 (a 6 on each dice). Your project will simulate rolling 2 dice 100 times, counting the number of times each possible result occurs. If you were doing this project manually, you would have a sheet of paper or a writing board with rows for 2, 3, 4, 5, ... 12 -- all the possible results that can occur from rolling 2 dice. If the first total is 7, then you would add a tick mark to the row for 7. If the next total is a 5, you would add a tick mark to the row for 5. If the next total is another 5, you would add another tick mark to the row for 5. And so on, until the dice have been rolled 100 times. The number of tick marks in the row for 2 is how many times a 2 was the result. The number of tick marks in the row for 3 is how many times a 3 was the result, etc. Each row is counting how many times that number was rolled. An array works very well for keeping those tick marks. If you have an array of size 12, it has elements numbered 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11. There are 12 elements, so you can put the tick mark (add 1) for a total of 5 in the array element for -- which one? The one with index 5 is the 6th element because arrays start at 0. Where do you put the tick mark for a total of 12? There is no element 12 in this array.
This is a situation where the index is "meaningful", adds information to the data of the project. The numbers you need to count are integers up to 12; you can declare an array with 12 elements to hold that data. Like this:
Array Index 0 1 2 3 4 5 6 7 8 9 10 11
Count of rolls count of 1s count of 2s count of 3s count of 4s count of 5s count of 6s count of 7s count of 8s count of 9s count of 10s count of 11s count of 12s
With a picture like this, you can see that if you need to add 1 to the count of 5s, you go to the element in array index 4. To add 1 to the count of 12s, go to the element in array index 11. The pattern is that the array index is 1 less than the value being counted. This is true for every number that you want to count So you can create an array of size 12 (index values are 0 to 11), and always subtract 1 from the dice total to access the correct element for that total. You can also look at the index value, like 6, and know that the data in that element has to do with dice total of (index + 1) = 7. When the value of the index is relevant to the contents at that index, it is a meaningful index.
A way to make the index even more meaningful is to remove that offset of 1: declare an array of size 13, which starts with an index of 0 and has a max index of 12.
Array Index 0 1 2 3 4 5 6 7 8 9 10 11 12
Count of rolls count of 0s count of 1s count of 2s count of 3s count of 4s count of 5s count of 6s count of 7s count of 8s count of 9s count of 10s count of 11s count of 12s
In this scenario, the array index is exactly the same value as the dice total that was just rolled. You can go to the array element with an index of the same number as that total, and add 1 to it to count that it was rolled again.
Because it is impossible to roll a 0 or 1 with 2 dice, those elements at the beginning of the array will always be zero, a waste of space. But these are small pieces of space, make the index even more meaningful, and can simplify the logic.
You can use either version, an array with exactly 12 elements, so the element to count a specific dice total has index of (total - 1), or an array with 13 elements, wasting the first two elements, so the element to count a specific dice total uses the same index as that dice total.
Write a project that has an array to count the number of times each total was rolled. Use a loop to "roll the dice" 100 times, as you saw in the reading about Random Numbers. Add 1 to the array element for the total; this counts how many times that total was rolled. After rolling the dice 100 times and counting the results in the array, display those counts. Use another loop to go through the array and print out the number in each element. Add that total to a grand total. After the array has been printed, display the grand total -- it better add up to 100.
We create an array of size 13 to represent the dice totals from 2 to 12. Each element in the array corresponds to a specific dice total, with the index value matching the total itself. We roll the dice in a loop, increment the corresponding array element for the rolled total, and repeat this process 100 times.
1. To begin, we create an array of size 13 to hold the counts for each dice total. This allows us to directly use the dice total as the index value, making the index more meaningful. We initialize all the elements in the array to 0.
2. Next, we enter a loop that simulates rolling the dice 100 times. Inside the loop, we generate two random numbers representing the dice rolls. We then calculate the total by summing up the two dice rolls.
3. To update the count for the specific dice total, we access the corresponding element in the array using the total as the index. Since the array index starts from 0, we subtract 2 from the total to obtain the correct index value. We increment the value in that array element by 1 to count the occurrence of that total.
4. After the loop finishes executing, we enter another loop to print out the counts for each dice total. We iterate through the array, starting from index 2 (representing dice total 2), and display the count stored in each element.
5. While printing the counts, we also calculate the grand total by summing up all the counts in the array. Finally, we display the grand total. If our simulation was correct, the sum of all the counts should be equal to 100, verifying that we rolled the dice the specified number of times.
6. By using an array and meaningful indices, we efficiently keep track of the dice totals and produce accurate results for the simulation.
Learn more about array here: brainly.com/question/13261246
#SPJ11
Define a function named des Vector that takes a vector of integers as a parameter. Function desVector () modifies the vector parameter by sorting the elements in descending order (highest to lowest). Then write a main program that reads a list of integers from input, stores the integers in a vector, calls des Vector (), and outputs the sorted vector. The first input integer indicates how many numbers are in the list. Ex: If the input is: 5 10 4 39 12 2 the output is: 39,12,10,4,2, Your program must define and call the following function: void desVector(vector& myVec)
The function `desVector()` sorts a vector of integers in descending order, while the main program reads, sorts, and outputs the vector.
Function `desVector()` takes a vector of integers as a parameter and modifies it by sorting the elements in descending order. The main program reads a list of integers, stores them in a vector, calls `desVector()`, and outputs the sorted vector. The function `desVector()` uses the `sort()` function from the `<algorithm>` library to sort the vector in descending order.
The main program prompts for the number of input integers, reads them using a loop, and appends them to the vector. Then it calls `desVector()` with the vector as an argument and prints the sorted elements using a loop. The program ensures that the `desVector()` function and the main program are defined and called correctly to achieve the desired output.
To learn more about program click here
brainly.com/question/30613605
#SPJ11
What is the postfix notation of the following expression, show few steps of the algo that allows you to covert it (content of the stack and queue for the first three operations): ((A +B)(CD-E))*((F+H"G)/(W-X))
The postfix notation of the expression ((A + B)(CD - E)) * ((F + H "G") / (W - X)) is AB+CDE-*FHG+"WX-/*".
What is the process for converting an infix expression to postfix notation using the Shunting Yard algorithm?To convert the given expression into postfix notation, we can use the Shunting Yard algorithm. Here are the steps and the contents of the stack and queue for the first three operations:
Expression: ((A + B)(CD - E)) * ((F + H "G") / (W - X))
1. Start with an empty stack and an empty queue.
Stack:
Queue:
2. Process each token from left to right:
Token: (
Action: Push it onto the stack.
Stack: (
Queue:
Token: (
Action: Push it onto the stack.
Stack: ((
Queue:
Token: A
Action: Add it to the queue.
Stack: ((
Queue: A
3. Token: +
Action: Push it onto the stack.
Stack: ((+
Queue: A
Learn more about postfix notation
brainly.com/question/13326115
#SPJ11
Give a recursive definition of the sequence {an},n=1,2,3,… if
(a) an =4n−2. (b) an =1+(−1)^n
(c) an =n(n+1). (d) an =n^2
(a) The recursive definition of the sequence {an}, n = 1, 2, 3, ..., where an = 4n - 2 is:
a1 = 4(1) - 2 = 2
an = 4n - 2 for n > 1
The sequence starts with a1 = 2, and each subsequent term an is obtained by multiplying the previous term by 4 and subtracting 2.
(b) The recursive definition of the sequence {an}, n = 1, 2, 3, ..., where an = 1 + (-1)^n is:
a1 = 1 + (-1)^1 = 0
an = 1 + (-1)^n for n > 1
The sequence alternates between 0 and 2. Each term an is obtained by adding 1 to the previous term and multiplying it by -1.
(c) The recursive definition of the sequence {an}, n = 1, 2, 3, ..., where an = n(n + 1) is:
a1 = 1(1 + 1) = 2
an = n(n + 1) for n > 1
The sequence starts with a1 = 2, and each subsequent term an is obtained by multiplying n with (n + 1).
(d) The recursive definition of the sequence {an}, n = 1, 2, 3, ..., where an = n^2 is:
a1 = 1^2 = 1
an = n^2 for n > 1
The sequence starts with a1 = 1, and each subsequent term an is obtained by squaring the value of n.
Learn more about recursive sequences here: https://brainly.com/question/28947869
#SPJ11
Write a C program to retrieve and display the values of the 1st, 10th and 100th decimal digits in order. For example, If you enter 123 We have: 3 2 1 If We have: 5 3 СЛ 5555 6 you enter 65535
Here's a C program that retrieves and displays the 1st, 10th and 100th decimal digits from an input number:
#include <stdio.h>
int main() {
int n, digit, i;
printf("Enter a number: ");
scanf("%d", &n);
// retrieve and display 1st decimal digit
digit = n % 10;
printf("1st digit: %d\n", digit);
// retrieve and discard next 9 digits
for (i = 0; i < 9 && n > 0; i++) {
n /= 10;
}
// retrieve and display 10th decimal digit
if (n > 0) {
digit = n % 10;
printf("10th digit: %d\n", digit);
}
// retrieve and discard next 90 digits
for (i = 0; i < 90 && n > 0; i++) {
n /= 10;
}
// retrieve and display 100th decimal digit
if (n > 0) {
digit = n % 10;
printf("100th digit: %d\n", digit);
}
return 0;
}
This program prompts the user to enter a number, retrieves and displays the 1st decimal digit, discards the next 9 decimal digits, retrieves and displays the 10th decimal digit if it exists, discards the next 90 decimal digits, and finally retrieves and displays the 100th decimal digit if it exists.
Learn more about program here:
https://brainly.com/question/14368396
#SPJ11
Q 1- State whether the following grammar is CLR(1), LALR(1) or not A. S->Aa S->bAc S->Bc S->bBa A->d B->d B. S->Aa S->bAc S->dc S->bda A->d
The given grammar is not CLR(1) or LALR(1) because it contains shift/reduce conflicts. These conflicts occur when the parser has to decide between shifting a terminal symbol or reducing a production rule based on the current lookahead symbol. CLR(1) and LALR(1) grammars do not have these conflicts, which makes them easier to parse.
1. A CLR(1) grammar is a class of context-free grammars that can be parsed using a bottom-up parser with a single lookahead token and a deterministic parsing table. Similarly, an LALR(1) grammar is a class of context-free grammars that can be parsed using a bottom-up parser with a lookahead of one token and a reduced parsing table.
2. In the given grammar, there are shift/reduce conflicts, which means that the parser encounters situations where it has to decide between shifting a terminal symbol or reducing a production rule based on the current lookahead symbol. These conflicts arise due to the ambiguity or lack of information in the grammar.
3. Let's analyze the two productions of the grammar:
A. S -> Aa
S -> bAc
S -> Bc
S -> bBa
A -> d
B -> d
4. The conflict occurs when the parser sees the terminal symbol 'd' as the lookahead after deriving 'A' and 'B'. It cannot decide whether to shift the 'd' or reduce the production rule 'A -> d' or 'B -> d'. This conflict violates the requirements of CLR(1) and LALR(1) grammars, which do not allow such conflicts.
B. S -> Aa
S -> bAc
S -> dc
S -> bda
A -> d
5. In this grammar, there is a similar conflict when the parser encounters the terminal symbol 'd' as the lookahead after deriving 'A'. It faces the same dilemma of whether to shift the 'd' or reduce the production rule 'A -> d'. Again, this violates the requirements of CLR(1) and LALR(1) grammars.
6. Therefore, the given grammar is neither CLR(1) nor LALR(1) due to the presence of shift/reduce conflicts, which make it difficult to construct a deterministic parsing table for efficient bottom-up parsing.
Learn more about context-free grammars here: brainly.com/question/30764581
#SPJ11
Using the mtcars dataset, write code to create a boxplot for
horsepower (hp) by number of cylinders (cyl). Use appropriate title
and labels.
The code snippet creates a boxplot in R using the mtcars dataset, displaying the distribution of horsepower values for each number of cylinders. The plot is titled "Horsepower by Number of Cylinders" and has appropriate axis labels.
Here's an example code snippet in R to create a boxplot for horsepower (hp) by the number of cylinders (cyl) using the mtcars dataset:
# Load the mtcars dataset
data(mtcars)
# Create a boxplot of horsepower (hp) by number of cylinders (cyl)
boxplot(hp ~ cyl, data = mtcars, main = "Horsepower by Number of Cylinders",
xlab = "Number of Cylinders", ylab = "Horsepower")
In the code above, we first load the mtcars dataset using the `data()` function. Then, we use the `boxplot()` function to create a boxplot of the horsepower (hp) variable grouped by the number of cylinders (cyl). The `~` symbol indicates the relationship between the variables. We specify the dataset using the `data` parameter.
To customize the plot, we provide the `main` parameter to set the title of the plot as "Horsepower by Number of Cylinders". The `xlab` parameter sets the label for the x-axis as "Number of Cylinders", and the `ylab` parameter sets the label for the y-axis as "Horsepower".
Running this code will generate a boxplot that visually represents the distribution of horsepower values for each number of cylinders in the mtcars dataset.
To know more about boxplot ,
https://brainly.com/question/31641375
#SPJ11
Describe algorithms to enumerate these sets. (You do not need to discuss the mechanics of constructing Turing machines to execute the algorithms.)
a. The set of all pairs (n, m) for which n and m are relatively prime positive integers ("relatively prime" means having no common factor bigger than 1)
b. The set of all strings over {0, 1} that contain a nonnull substring of the form www
Please answer as soon as possible. It is really needed.
a. Use the Euclidean algorithm to check the GCD of pairs (n, m) for relative primality. b. Apply a sliding window approach to enumerate strings containing the substring "www".
a. Algorithm to Enumerate Relatively Prime Pairs: We can use the Euclidean algorithm to determine the greatest common divisor (GCD) of pairs (n, m) where n and m are positive integers. Initialize n and m with the smallest values, increment n, and iterate through possible values of m. Calculate the GCD using the Euclidean algorithm for each pair. If the GCD is 1, add the pair to the enumerated set. Continue this process until all desired pairs are enumerated. b. Algorithm to Enumerate Substrings of "www": Employ a sliding window approach. Start with the shortest string of length 3 that contains the desired substring "www". Incrementally increase string length and slide the window over each string, checking if the current window contains the pattern "www". Add the string to the enumerated set if the pattern is found. Continue this process, increasing string length, until all strings meeting the criteria are enumerated.
Learn more about Substrings of "www" here:
https://brainly.com/question/14800470
#SPJ11
If an 8-bit binary number is used to represent an analog value in the range from 010 to 10010, what does the binary value 010011102 represent?
Converting the binary number 01001110 to decimal, we get 78. Therefore, the analog value represented by the binary number 01001110 is 78 within the given range.
To determine the analog value represented by the binary number 01001110, we need to understand the range and precision of the binary representation.
Given that the 8-bit binary number represents an analog value in the range from 010 to 10010, we can deduce the following:
The smallest analog value represented is 010, which corresponds to the binary number 00000010.
The largest analog value represented is 10010, which corresponds to the binary number 10010010.
To find the analog value represented by the binary number 01001110, we need to map it within the range. Since the binary number is 8 bits, it corresponds to an 8-bit binary representation.
Know more about binary number here;
https://brainly.com/question/28222245
#SPJ11
Problem 3:- Clalculate how long will Selective Repeate, stop and wait, and Go Back N protocol for send three frames, if the time-out of 4 ms and the round trip delay is 3 ms, assume the second frame is lost. [6 points]
To calculate the time required for selective repeat, stop and wait, and Go Back N protocols to send three frames, considering a timeout of 4 ms and a round trip delay of 3 ms, we need to analyze the behavior of each protocol.
In this scenario, the second frame is lost. The protocols will retransmit the lost frame based on their specific mechanisms, and the time taken will depend on the protocol's efficiency in recovering from errors.
Selective Repeat: In the Selective Repeat protocol, the lost frame will be detected after the timeout period expires. The sender will retransmit only the lost frame while continuing to send the remaining frames. The total time required will be the sum of the timeout period and the round trip delay, which is 4 ms + 3 ms = 7 ms.
Stop and Wait: In the Stop and Wait protocol, the sender will wait for an acknowledgment before sending the next frame. Since the second frame is lost, the sender will have to retransmit it after the timeout period expires. Therefore, the total time required will be the sum of the timeout period and the round trip delay, which is 4 ms + 3 ms = 7 ms.
Go Back N: In the Go Back N protocol, the sender will continue sending frames until it receives a negative acknowledgment (NACK) for the lost frame. Upon receiving the NACK, the sender will retransmit all the frames starting from the lost frame. In this case, the sender will retransmit frames 2 and 3. The total time required will be the sum of the timeout period and the round trip delay for each retransmission, which is 4 ms + 3 ms + 4 ms + 3 ms = 14 ms.
Therefore, the time required for the Selective Repeat and Stop and Wait protocols is 7 ms, while for the Go Back N protocol, it is 14 ms, considering the loss of the second frame.
To learn more about protocols click here:
brainly.com/question/31846837
#SPJ11
The degree distribution of the following graph is:
O [(4,1)(3,2)(2,4)]
O [(1,4)(2,3)(4,2)]
O [1,2,4,0]
O [4,3,3,2,2,2,2]
The degree distribution of the graph is O [4,3,3,2,2,2,2]. Each number represents the number of vertices with that specific degree.
The degree of a vertex in a graph refers to the number of edges connected to that vertex. The degree distribution provides information about how many vertices have each possible degree.
In the given options, we can see four different degree values: 1, 2, 3, and 4. The first option (O [(4,1)(3,2)(2,4)]) tells us that there is one vertex with degree 4, two vertices with degree 3, and four vertices with degree 2. This matches the degree distribution O [4,3,3,2,2,2,2], making it the correct answer.
To determine the degree distribution, we count the number of vertices in the graph with each degree and represent it as a list. In this case, there are four vertices with degree 2, three vertices with degrees 3, and one vertex with degree 4. The remaining degree values (0 and 1) are not present in the given options. Therefore, the correct answer is O [4,3,3,2,2,2,2].
To learn more about distribution click here
brainly.com/question/32159387
#SPJ11
For knowledge representation, semantic network representation can be used instead of predicate logic. Represent following sentences in a semantic network (nodes and arcs). [12] Fifi is a dog. Fifi is a mammal. Nhlalo own Fifi. Fifi eats meat. Mammals are animals. Animals are living things. 4. Every lizard likes the sun. [3] 5. No red tomato is sour. [3]
Semantic network representation is a type of knowledge representation that uses nodes and arcs to represent entities and relationships between them. It is an alternative to predicate logic, which uses formalized logical statements to represent knowledge.
The advantage of using semantic networks is that they are easier to understand and visualize than predicate logic.
The given sentences have been represented as a semantic network, where the nodes represent entities and the arcs represent relationships between them. For example, the sentence "Fifi is a dog" has been represented as Fifi -> is_a -> dog, where Fifi is connected to the node "dog" with an "is_a" arc. Similarly, all the other sentences have been represented in a similar manner.
By representing knowledge in a semantic network, it becomes easier to identify patterns and relationships between entities. It also allows for more flexible reasoning and inference since there are no strict rules or limitations like in predicate logic. Additionally, semantic networks can be easily expanded or modified as new knowledge is acquired, making them a useful tool for knowledge representation and management.
Learn more about network here:
https://brainly.com/question/1167985
#SPJ11
Consider the following problem. In the future, you are presented with two alien words W1 and W2, both of length m. Both of these words are formed from the alien alphabet/characters. Each word is stored in an array. Part of our understanding of this alien language is that two words have the same meaning if one word is a permutation of another, or in other words, if after rearranging the order of the characters in one word, it is the same as the other word. E.g., assuming alien alphabet is A,B,C, then the two alien Words ABC and CBA are the same, or ABB and BAB are the same. As there are many pairs of words to check, you've been tasked to design an algorithm to determine if two alien words of the same length have the same meaning. Which of the following algorithms & complexity analysis are correct? Select ONE or MORE answers. Input: two words W1 and W2 of the same length m.
Algorithm Description: 1. For each position p in W1, perform a sequential search for W1 [p] in W2. 2. If there is a match for W1 [p] in W2 for every p, then the two words have the same meaning. Otherwise, the two words have different meaning. Complexity Analysis: This algorithm has worst-case complexity 0(m²). Algorithm Description: Input: two words W1 and W2 of the same length m. 1. Sort both words W1 and W2 by its alien alphabet order with Quick Sort. 2. For each position p in sorted W1, compare sortedW1[p] with sortedW2[p]. 3. If all positions have the same characters, then the two words are considered the same word (same meaning) in the alien language, otherwise they are different words. Complexity Analysis: This algorithm has average-case complexity O(m log(m)). Algorithm Description: Input: two words W1 and W2 of the same length m. 1. Build two hash tables H1 and H2 for W1 and W2 as follows. We describe the construction of H1 for W1 only (similarly for H2 and W2). For each character W1 [p] in W1, we first check if W1 [p] exists in H1 (empty at first) or not. If it doesn't, then create a new pair (key=W1 [p], value=1) and add this pair tho H1. If there is an existing pair (key=W1 [p], value=v) in H1, then update it to (key=W1 [p], value=v+1). 3. For each character W2[p] in W2, look up for the key W2[p] to retrieve the entry (key=W2[p], value=v2) in H2. Then look up for the key W2[p] in H1. If for some p there's no such key in H1 or if the corresponding pair in H1 (key=W2[p],value=v1) having v1 not the same as v2, then W1 and W2 do not have the same meaning. Otherwise, the two words have the same meaning. Complexity Analysis: This algorithm has worst-case complexity O(n).
All are correct
Algorithm Description: For each position p in W1, perform a sequential search for W1[p] in W2. If there is a match for W1[p] in W2 for every p, then the two words have the same meaning.
Complexity Analysis: This algorithm has worst-case complexity O(m^2).
Algorithm Description: Sort both words W1 and W2 by their alien alphabet order with Quick Sort. For each position p in the sorted W1, compare sortedW1[p] with sortedW2[p]. If all positions have the same characters, then the two words are considered the same word (same meaning) in the alien language; otherwise, they are different words.
Complexity Analysis: This algorithm has average-case complexity O(m log(m)).
Algorithm Description: Build two hash tables H1 and H2 for W1 and W2. For each character W1[p] in W1, check if W1[p] exists in H1. If it doesn't, create a new pair (key=W1[p], value=1) and add it to H1. If there is an existing pair (key=W1[p], value=v) in H1, update it to (key=W1[p], value=v+1). For each character W2[p] in W2, look up the key W2[p] in H1 and H2. If for some p there is no key in H1 or if the corresponding pairs in H1 and H2 have different values, then W1 and W2 do not have the same meaning. Otherwise, the two words have the same meaning.
Complexity Analysis: This algorithm has worst-case complexity O(n).
Therefore, options 1, 2, and 3 are all correct in terms of algorithm description and complexity analysis.
To know more about algorithm description and complexity analysis here: https://brainly.com/question/13265216
#SPJ11
Read the following cancel booking use case scenario, then fill the template below [SPoints] The client can access the hotel website to make reservation. The client starts by selecting the arrival and departure dates and room type that he/she prefer. The system provides the availability of the room and the corresponding price. The client accepts the offered room. If the room is not available the system offers alternative options, and the client either accept and select from alternatives or refuses it and the reservation ends. Once the client accepts the offer, the system asks for client's to enter name, postal code and email address. Once entered the system makes reservation and allocate reservation number. If the client declines the reservation, the whole process fail otherwise client gets confirmation of the reservation and an email with that is sent to client's email. ID: Title: Description: Primary Actor: Preconditions:
Post-conditions: Main Success Scenario: Extensions: Requirements (List five)
ID: 1
Title: Cancel Booking
Description: The client cancels a previously made reservation.
Primary Actor: Client
Preconditions:
The client has made a reservation through the hotel website.
The client has the reservation number or other necessary information to identify the reservation.
Post-conditions:
The reservation is successfully canceled.
The client receives confirmation of the cancellation.
Main Success Scenario:
The client accesses the hotel website and logs into their account.
The client navigates to the reservation management section.
The client selects the option to cancel a reservation.
The system prompts the client to enter the reservation number or other identifying information.
The client provides the required information.
The system verifies the information and confirms the reservation cancellation.
The system updates the reservation status to "canceled" and releases the allocated room.
The client receives a confirmation of the cancellation via email.
Extensions:
Step 4a: If the provided information is incorrect or invalid, the system displays an error message and prompts the client to re-enter the information.
Step 6a: If the reservation is already canceled or does not exist, the system informs the client and no further action is taken.
Requirements:
The system should allow the client to log in and access their reservations.
The system should provide a user-friendly interface for canceling reservations.
The system should validate the provided information for canceling a reservation.
The system should update the reservation status and release the room upon cancellation.
The system should send a confirmation email to the client after a successful cancellation.
Learn more about Client here:
https://brainly.com/question/14753529
#SPJ11
You are planning to develop a website for McDonald’s. Proposed
ONE (1) software development model that can be adapted to develop
your website. Briefly explain the FIVE (5) stages from the
model.
One software development model that can be adapted to develop the website for McDonald's is the Agile Development Model.The Agile Development Model offers flexibility, adaptability, and frequent stakeholder collaboration. It allows for incremental development and provides opportunities to make adjustments based on feedback, resulting in a website that aligns closely with McDonald's requirements and user preferences.
The five stages of the Agile Development Model are as follows:
Planning: In this stage, the project goals, requirements, and deliverables are defined. The development team collaborates with stakeholders, including McDonald's representatives, to gather requirements and create a product backlog.
Development: This stage involves iterative development cycles called sprints. The development team works on small increments of the website's functionality, typically lasting two to four weeks. Each sprint includes planning, development, testing, and review activities.
Testing: Throughout the development stage, rigorous testing is conducted to ensure the website meets the specified requirements and functions correctly. Test cases are designed, executed, and any defects or issues are identified and resolved promptly.
Deployment: Once the website features have been developed, tested, and approved, they are deployed to a production environment. This stage involves configuring the servers, databases, and other necessary infrastructure to make the website accessible to users.
Feedback and Iteration: Agile development encourages continuous feedback from stakeholders and end users. This feedback is used to refine and enhance the website further. The development team incorporates the feedback into subsequent sprints, allowing for iterative improvements and feature additions.
To know more about website, visit:
https://brainly.com/question/13211964
#SPJ11
2: Explain how three laws, regulations, or legal cases apply in the justification of legal action based upon negligence described in the case study.
CFAA: Based on the CFAA criminal activity observed, explain how the negligence that led to the activity specifically justifies legal action ECPA: Based on the ECPA criminal activity observed, explain how the negligence that led to the activity specifically justifies legal action SOX: Explain how negligence that led to an instance of a SOX violation justifies legal action You may use any three applicable law, regulation, or legal case for this section. Using the three already mentioned in the task (ECPA, SOX, CFAA) is highly recommended however.
Summary:
In the case study, three laws/regulations - the Computer Fraud and Abuse Act (CFAA), the Electronic Communications Privacy Act (ECPA), and the Sarbanes-Oxley Act (SOX) - are examined to determine how negligence justifies legal action.
The Computer Fraud and Abuse Act (CFAA) can be invoked to justify legal action when negligence leads to criminal activity. The CFAA prohibits unauthorized access to computer systems. In the case study, if negligence by an individual or entity results in unauthorized access to computer systems, such as failing to implement proper security measures or adequately protect sensitive information, legal action can be justified. Negligence in safeguarding computer systems can be seen as a contributing factor to the criminal activity under the CFAA.
Similarly, the Electronic Communications Privacy Act (ECPA) addresses the interception and disclosure of electronic communications without proper authorization. Negligence that allows for unlawful interception or disclosure of electronic communications can justify legal action under the ECPA. For instance, if an organization fails to secure its communication channels, neglects to obtain consent for interception, or mishandles confidential information, resulting in criminal activity, legal action based on negligence can be pursued.
The Sarbanes-Oxley Act (SOX) focuses on corporate financial reporting and sets forth regulations to prevent financial fraud and misrepresentation. Negligence leading to a violation of SOX can justify legal action. If a company fails to maintain accurate financial records, neglects internal controls, or allows for fraudulent activities to occur due to negligence, legal action can be pursued to address the violation of SOX regulations.
In all three cases, negligence plays a critical role in justifying legal action. Negligence implies a failure to exercise reasonable care or fulfill legal responsibilities, which can lead to breaches of these laws/regulations. By establishing a connection between negligence and the resulting criminal activity or violation, legal action can be justified to hold the responsible parties accountable.
know more about Computer Fraud and Abuse Act (CFAA) :brainly.com/question/32360178
#SPJ11
(1) The Chinese ID number can be regarded as the unique identification of each person, including our place of birth, date of birth, and gender. The specific rules are, the first and second digits represent the province; the third and fourth digits represent the city; the fifth and sixth digits represent the districts and counties; the seventh to fourteenth digits represent the date of birth; the fifteenth digitsAnd the 16th digit represents the birth order number; the 17th digit represents the gender; the 18th digit is the check code. According to this rule some information can be obtained. This task requires writing a Python program that will obtain the corresponding provinceaccording to the input ID number.
Example: 430621198208192314
43---Hunan province
06---Yueyang
21---Yueyang County
19820819---date of birth
23---birth order number
1---gender
4---check code
(1) The Chinese ID number can be regarded as the unique identification of each person, including our place of birth, date of birth, and gender. The specific rules are, the first and second digits represent the province; the third and fourth digits represent the city; the fifth and sixth digits represent the districts and counties; the seventh to fourteenth digits represent the date of birth; the fifteenth digitsAnd the 16th digit represents the birth order number; the 17th digit represents the gender; the 18th digit is the check code. According to this rule some information can be obtained. This task requires writing a Python program that will obtain the corresponding provinceaccording to the input ID number.
Example: 430621198208192314
43---Hunan province
06---Yueyang
21---Yueyang County
19820819---date of birth
23---birth order number
1---gender
4---check code
PYTHON!!
Here's a Python program that can extract the corresponding province from a given Chinese ID number:
```python
def get_province(id_number):
province_code = id_number[:2]
# You can define a dictionary with province codes and their corresponding names
province_dict = {
"11": "Beijing",
"12": "Tianjin",
"13": "Hebei",
# Add more province codes and names here
}
return province_dict.get(province_code, "Unknown")
# Example usage
id_number = "430621198208192314"
province = get_province(id_number)
print(province)
```
In this program, the `get_province` function takes an ID number as input and extracts the first two digits to determine the province code. It then uses a dictionary `province_dict` to map the province codes to their corresponding names. The function returns the province name if it exists in the dictionary, otherwise it returns "Unknown". Finally, an example ID number is provided, and the corresponding province is printed as output.
To learn more about python click on:brainly.com/question/32166954
#SPJ11
If same functionality is accessed through an object and used different classes and all of those can respond in a different way, the phenomenon is best known as: Select one: a. Inheritance b. Overloading
c. Overriding
d. Polymorphism
d.The phenomenon described, where the same functionality is accessed through an object and used by different classes that can respond in a different way, is best known as polymorphism.
Polymorphism is a fundamental concept in object-oriented programming that allows objects of different classes to be treated as objects of a common superclass. It enables the same method to be invoked on different objects, resulting in different behaviors depending on the actual class of the object.
Polymorphism promotes code reusability, flexibility, and extensibility, as it allows for the creation of generic code that can work with objects of different types without explicitly knowing their specific classes It enables the same method to be invoked on different objects, resulting in different behaviors depending on the actual class of the object.
To learn more about polymorphism click here : /brainly.com/question/29887429
#SPJ11
6. (10 points) How many integers from 1 through 1000 are not divisible by any one of 4,5, and 6?
There are 549 integers from 1 through 1000 that are not divisible by any one of 4, 5, and 6.
To solve this problem, we need to count the integers from 1 through 1000 that are divisible by at least one of 4, 5, or 6, and subtract them from 1000.
First, let's count the integers that are divisible by 4, 5, or 6 separately.
Divisible by 4:
Every fourth number is divisible by 4, so there are 1000 / 4 = 250 numbers between 1 and 1000 that are divisible by 4.
Divisible by 5:
Every fifth number is divisible by 5, so there are 1000 / 5 = 200 numbers between 1 and 1000 that are divisible by 5.
Divisible by 6:
Every sixth number is divisible by 6, so there are 1000 / 6 = 166.666... numbers between 1 and 1000 that are divisible by 6. We need to round down to get a whole number, so there are 166 numbers between 1 and 1000 that are divisible by 6.
Now, let's count the integers that are divisible by at least one of 4, 5, or 6. We can do this using the principle of inclusion-exclusion:
Count the integers that are divisible by 4, 5, or 6 separately: 250 + 200 + 166 = 616.
Count the integers that are divisible by both 4 and 5: Every twentieth number is divisible by both 4 and 5, so there are 1000 / 20 = 50 numbers between 1 and 1000 that are divisible by both 4 and 5.
Count the integers that are divisible by both 4 and 6: Every twelfth number is divisible by both 4 and 6, so there are 1000 / 12 = 83.333... numbers between 1 and 1000 that are divisible by both 4 and 6. We need to round down to get a whole number, so there are 83 numbers between 1 and 1000 that are divisible by both 4 and 6.
Count the integers that are divisible by both 5 and 6: Every thirtieth number is divisible by both 5 and 6, so there are 1000 / 30 = 33.333... numbers between 1 and 1000 that are divisible by both 5 and 6. We need to round down to get a whole number, so there are 33 numbers between 1 and 1000 that are divisible by both 5 and 6.
Subtract the integers that are counted twice: 50 + 83 + 33 = 166.
Add back the integers that are counted three times: There is only one integer between 1 and 1000 that is divisible by both 4, 5, and 6, which is 60 (the least common multiple of 4, 5, and 6).
The total number of integers between 1 and 1000 that are divisible by at least one of 4, 5, or 6 is 616 - 166 + 1 = 451.
Finally, we can calculate the number of integers from 1 through 1000 that are not divisible by any one of 4, 5, and 6 by subtracting 451 from 1000:
1000 - 451 = 549.
So there are 549 integers from 1 through 1000 that are not divisible by any one of 4, 5, and 6.
Learn more about integers here:
https://brainly.com/question/31864247
#SPJ11
When do we make a virtual function "pure", demonstrate with program? What are the implications of making a function a pure virtual function?
A pure virtual function is declared with "= 0" in the base class and must be overridden in derived classes. It enforces implementation in derived classes and allows for polymorphism and a more flexible design.
A virtual function is made "pure" when it is declared with "= 0" in the base class. This signifies that the function has no implementation in the base class and must be overridden in derived classes. The main purpose of a pure virtual function is to create an interface or contract that derived classes must adhere to.
When a function is declared as a pure virtual function, it means that the base class is defining a placeholder for the function that must be implemented by any derived class. This allows for polymorphism, where objects of different derived classes can be treated as objects of the base class.
To demonstrate the concept, consider the following example:
```
class Shape {
public:
virtual void calculateArea() = 0; // Pure virtual function
};
class Circle : public Shape {
public:
void calculateArea() override {
// Implementation for calculating the area of a circle
}
};
class Rectangle : public Shape {
public:
void calculateArea() override {
// Implementation for calculating the area of a rectangle
}
};
int main() {
Shape* shape1 = new Circle();
Shape* shape2 = new Rectangle();
shape1->calculateArea(); // Calls the calculateArea() implementation in Circle
shape2->calculateArea(); // Calls the calculateArea() implementation in Rectangle
delete shape1;
delete shape2;
return 0;
}
```
In this example, the `Shape` class declares a pure virtual function `calculateArea()`. The `Circle` and `Rectangle` classes inherit from `Shape` and provide their own implementations of `calculateArea()`. In the `main()` function, objects of `Circle` and `Rectangle` are treated as objects of the base class `Shape`, and the appropriate `calculateArea()` function is called based on the actual object type.
The implications of making a function a pure virtual function are:
1. It enforces derived classes to provide their own implementation of the function. This ensures that the derived classes adhere to the interface defined by the base class.
2. The base class becomes an abstract class, which cannot be instantiated directly. It can only be used as a base for deriving new classes. This allows for a more generic and polymorphic usage of objects.
In summary, making a function a pure virtual function in a base class allows for defining an interface that derived classes must implement. It enables polymorphism and ensures that objects of different derived classes can be treated uniformly based on the base class. The implications include enforcing implementation in derived classes and making the base class abstract, leading to a more flexible and extensible design.
To learn more about virtual function click here: brainly.com/question/12996492
#SPJ11
Consider the below set S of Horn clauses.
P(a)
￢P(x) ∨ P(s(x))
￢P(x) ∨ Q(x)
￢Q(s(s(a)))
Here, P and Q are predicates, a is a constant, x is a variable, and s is a unary function symbol. The clauses containing variables are implicitly universally quantified. Using unification, derive the empty clause from S. When variables are unified, be sure to show the unifiers.
The empty clause can be derived from the given set S of Horn clauses using unification.
The first clause, P(a), does not require any unification as it is already in a simplified form.
In the second clause, ¬P(x) ∨ P(s(x)), we can unify ¬P(x) with P(a) using the substitution unifier θ = {x/a}. This results in the term P(s(a)).
Moving on to the third clause, ¬P(x) ∨ Q(x), we can also unify ¬P(x) with P(a) using the same substitution unifier θ = {x/a}. This yields the term Q(a).
Finally, in the fourth clause, ¬Q(s(s(a))), we can unify ¬Q(s(s(a))) with Q(a) using the substitution unifier θ = {s(s(a))/a}. This gives us the term ¬Q(a).
At this point, we have both Q(a) and ¬Q(a) present, which is a contradiction. Thus, we can derive the empty clause from the given set S of Horn clauses using unification.
Learn more about unification here:
brainly.com/question/30291878
#SPJ11
Which of the following is TRUE about binary trees:
a. Every binary tree is either complete or full. b. Every complete binary tree is also a full binary tree. c. Every full binary tree is also a complete binary tree. d. None of the above
The one true statement among the options is C that is; Every full binary tree is also a complete binary tree.
Since the full binary tree is a binary tree in which each node has either 0 or 2 children. Apart form this, a complete binary tree is a binary tree where every level, except possibly the last one, is completely filled, and all nodes are as far left as possible.
Also, it is known that a full binary tree satisfies the conditions of having either 0 or 2 children for each node, it inherently meets the criteria for being completely filled at each level and having all nodes as far left as possible.
Thus, we can conclude that every full binary tree is also a complete binary tree.
You can learn more about binary trees at: brainly.com/question/13152677
#SPJ4
4. Write and test the following function: 1 2 3 def rgb_mix(rgb1, rgb2): 11 11 11 Determines the secondary colour from mixing two primary RGB (Red, Green, Blue) colours. The order of the colours is *not* significant. Returns "Error" if any of the colour parameter(s) are invalid. "red" + "blue": "fuchsia" "red" + "green": "yellow" "green" + "blue": "aqua" "red" + "red": "red" "blue" + "blue": "blue" "green" + "green": "green" Use: colour = rgb_mix(rgb1, rgb2) Parameters: rgb1 a primary RGB colour (str) rgb2 a primary RGB colour (str) Returns: colour - a secondary RGB colour (str) 11 11 11 Add the function to a PyDev module named functions.py. Test it from t04.py. The function does not ask for input and does no printing - that is done by your test program. 545678901234566982 11
Here's the implementation of the rgb_mix function that meets the requirements:
python
def rgb_mix(rgb1, rgb2):
colors = {"red", "green", "blue"}
if rgb1 not in colors or rgb2 not in colors:
return "Error"
if rgb1 == rgb2:
return rgb1
mix = {("red", "blue"): "fuchsia",
("red", "green"): "yellow",
("green", "blue"): "aqua",
("blue", "red"): "fuchsia",
("green", "red"): "yellow",
("blue", "green"): "aqua"}
key = (rgb1, rgb2) if rgb1 < rgb2 else (rgb2, rgb1)
return mix.get(key, "Error")
The function first checks if both input parameters are valid primary RGB colors. If either one is invalid, it returns "Error". If both input parameters are the same, it returns that color as the secondary color.
To determine the secondary color when the two input parameters are different, the function looks up the corresponding key-value pair in a dictionary called mix. The key is a tuple containing the two input parameters in alphabetical order, and the value is the corresponding secondary color. If the key does not exist in the dictionary, indicating that the combination of the two input colors is not valid, the function returns "Error".
Here's an example test program (t04.py) that tests the rgb_mix function:
python
from functions import rgb_mix
# Test cases
tests = [(("red", "blue"), "fuchsia"),
(("red", "green"), "yellow"),
(("green", "blue"), "aqua"),
(("blue", "red"), "fuchsia"),
(("green", "red"), "yellow"),
(("blue", "green"), "aqua"),
(("red", "red"), "red"),
(("blue", "blue"), "blue"),
(("green", "green"), "green"),
(("red", "yellow"), "Error"),
(("purple", "green"), "Error")]
# Run tests
for test in tests:
input_data, expected_output = test
result = rgb_mix(*input_data)
assert result == expected_output, f"Failed for input {input_data}. Got {result}, expected {expected_output}."
print(f"Input: {input_data}. Output: {result}")
This test program defines a list of test cases as tuples, where the first element is a tuple containing the input parameters to rgb_mix, and the second element is the expected output. The program then iterates through each test case, calls rgb_mix with the input parameters, and checks that the actual output matches the expected output. If there is a mismatch, the program prints an error message with the input parameters and the actual and expected output. If all tests pass, the program prints the input parameters and the actual output for each test case.
Learn more about function here:
https://brainly.com/question/28939774
#SPJ11
There's a lot of poor-style HTML code in the world. Why?
1.Group of answer choices
2.Browsers are incredibly lenient
3.It is not important to write a good-style HTML code.
4.Poor-style code is easy to understand
HTML stands for Hyper Text Markup Language. It is the standard markup language used to create web pages. HTML is a cornerstone technology that is used with other technologies like CSS and JavaScript to create a web page. There is a lot of poor-style HTML code in the world. The correct answer is option 1. Browsers are incredibly lenient
There are a few reasons why there is a lot of poor-style HTML code in the world. One reason is that browsers are incredibly lenient. This means that they are able to display web pages that are poorly coded. In other words, even if a web page has a lot of coding errors, a browser can still display the page. Another reason is that some people think that it is not important to write good-style HTML code. These people believe that as long as a web page looks okay and functions properly, then the code behind the web page doesn't matter. A third reason is that poor-style code is easy to understand. It is true that poorly written code can be easier to read than well-written code. However, this doesn't mean that it is better to write poor-style code. In conclusion, there are many reasons why there is a lot of poor-style HTML code in the world. While it is true that some people think that it is not important to write good-style HTML code, it is actually very important. Well-written code is easier to maintain, easier to read, and easier to update. Therefore, it is important to write good-style HTML code.
To learn more about HTML, visit:
https://brainly.com/question/32819181
#SPJ11