a coin is placed at different locations on a vinyl disk which spins about the center at a constant angular velocity. the coin rotates without sliding on the disk. its linear velocity increases in magnitude when the distance from the location of the coin to the center of the disk increases. group of answer choices true false

Answer:

L = 912 kg*m^2/s

Explanation:

L = mvr

L = 80kg(6m/s)(1.9m)

L = 912

The angular momentum of the person is 912 kg⋅m²/s.

The angular momentum (L) of an object is given by the product of its moment of inertia (I) and its angular velocity (ω). The moment of inertia of a point mass rotating about an axis at a distance r from the center is given by I = mr², where m is the mass of the object.

In this case, the person is sitting on the edge of a rotating platform at a distance of 1.9 m from the center. Therefore, the moment of inertia of the person-platform system is I = mr² = 80 kg × (1.9 m)² = 288.8 kg⋅m².

The tangential speed (v) of the person is given as 6.0 m/s. The angular velocity (ω) can be calculated as ω = v/r, where r is the distance from the center. Therefore, ω = 6.0 m/s ÷ 1.9 m = 3.16 rad/s.

Now, we can calculate the angular momentum of the person as L = Iω = (288.8 kg⋅m²) × (3.16 rad/s) = 912 kg⋅m²/s.

To know more about angular momentum, refer here:
https://brainly.com/question/29563080#
#SPJ11

The sieving would work best when really small pieces and fibers of paper are mixed in with sand and need to be removed.

When really small pieces and fibers of paper are mixed in with sand and need to be removed, the separation process that would probably work best is sieving.What is sieving?Sieving is a physical separation process that separates solid particles based on their particle size.

This process can be used to separate a variety of materials, including powders, grains, and solids.Sieving is the process of separating materials based on their size.

A sieve is a device that consists of a mesh or net that is used to separate larger particles from smaller particles. When a mixture of particles is poured onto a sieve, the smaller particles fall through the mesh, while the larger particles remain on top of the mesh.

This process is used to remove impurities from a mixture and to separate materials with different particle sizes.

To learn more about : fibers

https://brainly.com/question/30614297

#SPJ11

In an ice sailcraft that is stalled on a frozen lake on a windless day, if all the wind bounces backward from the sail, the craft will not be set in motion.

This is because the direction of the wind would be the same as that of the sail, resulting in a situation where the sail will not be able to catch any wind.

If all of the wind bounces backward off the sail in the given situation, there will be no force exerted on the sail to cause motion. The fan may cause some air movement, but the sailcraft would stay immobile if there was no wind to give lift.

Therefore, the craft will not move in any direction.

For more such questions on sailcraft, click on:

https://brainly.com/question/13731400

#SPJ11

the disk has the greatest angular momentum at the end of the 2 seconds, when the net torque becomes constant.

To determine the instant in time when the disk has the greatest angular momentum, we need to use the relationship between torque and angular momentum:

τ = dL/dt

where τ is the net torque, L is the angular momentum, and t is time.

We can see from the graph that the net torque on the disk increases linearly with time for the first 2 seconds and then remains constant at 0.6 Nm. Since the disk is initially at rest, its initial angular momentum is zero.

During the first 2 seconds, the angular momentum of the disk increases as a result of the torque acting on it. We can integrate the torque over time to find the change in angular momentum:

ΔL = ∫τ dt = ∫(0.2t) dt = 0.1[tex]t^2[/tex]

So, at any time t during the first 2 seconds, the angular momentum of the disk is given by:

L = 0.1[tex]t^2[/tex]

The angular momentum of the disk will be greatest at the end of the 2 seconds, when the torque stops changing and reaches its constant value of 0.6 Nm. At this point, the angular momentum will be:

L = 0.1[tex](2)^2[/tex] = 0.4 kg [tex]m^2[/tex]/s

Learn more about angular momentum here:

https://brainly.com/question/29897173

#SPJ1

Energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.

"false", "thermal equilibrium", "Heat".Statement that is false from the options provided is:Thermal energy always flows from colder objects to warmer objects.What is thermal equilibrium?Thermal equilibrium is defined as the state of a system in which its temperature is uniform and unchanging over time. Heat is the transfer of thermal energy from one substance to another. Thermal energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.

Learn more about thermal equilibrium Energy here:

https://brainly.com/question/14132618

#SPJ4

The formula Acceleration= 160401 from Physics with Charlie a (10) a (35) = 2 1. fraca(10)a(35)=frac21 is used to get the train's acceleration.

Finally, we may say that acceleration is indeed a fundamental idea in physics that explains how things move. The rate at which an item changes either trajectory or velocity, or both, is referred to as its magnitude of acceleration. Using the equation a = (v - u) / t, one can easily determine the magnitude of acceleration.

|v| =(output + y2) is the formula to calculate a vector's magnitude in two dimensions (x, y). The Pythagorean theorem is the foundation of this formula.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ1

For a classical wave, the following statements are true: b,c and the statements a and d are false.

a. Frequency is proportional to velocity: This statement is not true. Frequency and velocity are independent properties of a wave. The frequency of a wave refers to the number of oscillations or cycles per unit time, while the velocity of a wave refers to the speed at which the wave propagates.

b. Wavelength is proportional to frequency: This statement is partially true. In a classical wave, the wavelength is inversely proportional to the frequency. This means that as the frequency increases, the wavelength decreases, and vice versa.

c. Energy is proportional to the amplitude: This statement is true. The amplitude of a wave refers to the maximum displacement of the wave from its equilibrium position. The energy of a wave is proportional to the square of its amplitude. This means that as the amplitude increases, the energy carried by the wave also increases.

d. Energy is proportional to wavelength: This statement is not true. The energy of a classical wave is proportional to its frequency, not its wavelength. This is expressed by the formula E = hf, where E is the energy of the wave, h is Planck's constant, and f is the frequency of the wave.

To learn more about classical wave here:

https://brainly.com/question/9695421

#SPJ11

The second projectile was 2 times faster than the first projectile, as its initial velocity was twice that of the first projectile.

Let's assume that the first projectile had an initial velocity of v1, and the second projectile had an initial velocity of v2.

m1v1 = (m1 + m2)v2,

v1 = 2v2

This means that the initial velocity of the second projectile was twice that of the first projectile.

To find out the maximum height reached by the second projectile, we can use the conservation of energy:

1/2 m1 v2^2 = (m1 + m2)gh

h' = 2h = 5.2 cm

Substituting the values in the equation, we get:

1/2 m1 v2^2 = (m1 + m2)gh'

Simplifying, we get:

v2^2 = 2gh'

Substituting the values, we get:

v2^2 = 2 x 9.81 x 0.052

v2 = 0.725 m/s.

A projectile is an object that is propelled through the air and follows a curved trajectory under the influence of gravity. Examples of projectiles include bullets, cannonballs, and rockets. A projectile is typically launched with an initial velocity and then moves through the air under the influence of gravity alone.

The trajectory of a projectile is determined by its initial velocity, angle of launch, and the force of gravity. As the projectile travels through the air, it experiences a downward force due to gravity, which causes it to follow a curved path called a parabola. The maximum height of the projectile occurs at the apex of the parabolic path, where the vertical component of the velocity is zero.

To learn more about Projectile visit here:

brainly.com/question/11422992

#SPJ4

When the solar panel equipment arrives on site, the mounting hardware needs to be stored close to the work area because it will be installed first. Therefore the correct option is option A.

Mounting hardware, such as brackets and rails, is used to secure the solar panels to the roof or ground, and it needs to be installed before the panels can be mounted.

Until the mounting hardware is completed, the solar panels, inverters, and batteries can be kept somewhere else.

The solar panels themselves, inverters, and batteries can be stored elsewhere until the mounting hardware is installed. Therefore the correct option is option A.

For such more question on equipment:

https://brainly.com/question/8310352

#SPJ11

Standing waves can be produced in systems that have boundaries or endpoints that reflect or absorb waves. The nature of the boundary conditions determines the types of standing waves that can be produced.

a. Closed-closed: In a closed-closed system, both ends of the system are fixed and do not allow any displacement of the medium. This means that there is no flow of the medium at either end. An example of a closed-closed system is a string that is fixed at both ends.

b. Open-open: In an open-open system, both ends of the system are free to move, allowing the medium to flow in and out. This means that there is maximum displacement of the medium at both ends. An example of an open-open system is an air column that is open at both ends.

c. Closed-open: In a closed-open system, one end of the system is fixed and the other end is free to move, allowing the medium to flow in and out. This means that there is maximum displacement of the medium at the open end and no displacement at the closed end. An example of a closed-open system is a pipe that is closed at one end and open at the other.

Learn more about standing waves here:

https://brainly.com/question/14176146

#SPJ4

We can solve this problem applying "Coulomb's Law" which states-

[tex]\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{F_{(air)} = K\times \dfrac{ q_1 q_2}{r^2}} \\ [/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\star\:\sf\underline{F_{(air)} = \dfrac{1}{4\pi \epsilon_{0} } \dfrac{q_1q_2}{r^2} }\\ [/tex]

Where-

As per question, we are given that -

Now that required values are given, so we can substitute the values into the formula and solve for Force -

[tex] \:\:\:\:\:\:\:\:\:\:\star\:\sf\underline{F_{(air)} = \dfrac{1}{4\pi \epsilon_{0} } \dfrac{q_1q_2}{r^2} }\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)}= 9\times 10^9 \times \dfrac{0.004\times -0.02 }{(6)^2}\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)}= -9\times 10^9 \times\dfrac{0.00008}{36}\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf Force_{(air)} = -9\times 10^9 \times 2.2\times 10^{-6}\\ [/tex]

[tex] \:\:\:\:\:\:\:\longrightarrow \sf \underline{Force_{(air)} = -19800\:N}\\ [/tex]

Changes in the core, seams, or surface of a baseball could make it travel farther than normal, leading to suspicions of foul play. However, any alterations to baseballs are closely monitored and must be approved by Major League Baseball to ensure fairness in the game.

There are a few changes that could potentially lead to baseballs traveling farther than normal:

Changes in the baseball's core: The core of a baseball is made up of rubber and cork, and a change in the density of these materials could potentially make the ball travel farther.

Changes in the baseball's seams: The seams on a baseball can affect its flight path, and a change in the height, width, or thickness of the seams could affect the ball's trajectory and make it travel farther.

Changes in the baseball's surface: The surface of a baseball can affect its aerodynamics, and a change in the texture or smoothness of the surface could potentially make the ball travel farther.

It's worth noting that changes in the baseballs are closely monitored by Major League Baseball, and any alterations must be approved by the league before they can be used in games. If a change is suspected to be causing an increase in home runs, the league would investigate and take appropriate action to ensure that the game remains fair and balanced.

Learn more about Baseball :

https://brainly.com/question/29783871

#SPJ4

The shortest length of the runway that will be needed for the American Airlines Boeing 787 to take off is 902 meters.

To determine the shortest length runway needed for the American Airlines Boeing 787 to take off, we can use the formula for acceleration:

a = F_net / m

where a is the acceleration, F_net is the net force, and m is the mass of the aircraft.

We know that each engine provides 321 kN of thrust, and there are two engines, so the net force is:

F_net = 2 * 321 kN = 642 kN

We can convert this to Newtons:

F_net = 642,000 N

We also know the mass of the aircraft:

m = 251,000 kg

Substituting these values into the formula for acceleration, we get:

a = F_net / m = 642,000 N / 251,000 kg

= 2.56 m/s^2

To determine the minimum runway length needed, we can use the formula for distance:

d = (v_f^2 - v_i^2) / (2 * a)

where d is the distance, v_f is the final velocity (takeoff speed), and v_i is the initial velocity (zero).

Substituting the values we know, we get:

d = (66.8 m/s)^2 / (2 * 2.56 m/s^2)

= 902 meters

To learn more about Airlines Boeing

https://brainly.com/question/14956599

#SPJ4

The acceleration (α) of the center of the hoop: α = (mg * sin(θ)) / (2m) = (g * sin(θ)) / 2

The minimum coefficient of static friction (μmin) needed for the hoop to roll without slipping: μmin = α / (g * cos(θ)) = (g * sin(θ) / 2) / (g * cos(θ)) = tan(θ) / 2

The acceleration (α) of the center of the circular hoop can be determined by applying Newton's second law and the principle of conservation of angular momentum. Considering gravitational force (mg), normal force (N), and friction force (f) acting on the hoop, we can write:

mg * sin(θ) - f = m * α (1) (linear motion) and f * r = I * α/r (2) (angular motion)

For a hoop, the moment of inertia (I) is given by I = m * r^2. Substituting this into equation (2) and solving for f, we get:

f = m * α (3)

Now, substitute equation (3) into equation (1):

mg * sin(θ) - m * α = m * α

Rearranging the terms, we get the acceleration (α) of the center of the hoop:

α = (mg * sin(θ)) / (2m) = (g * sin(θ)) / 2

For the hoop to roll without slipping, the static friction (f) must be equal to the torque acting on the hoop. The minimum coefficient of static friction (μmin) can be determined using the frictional force equation:

f = μmin * N

Since the normal force (N) equals mg * cos(θ), the frictional force can be written as:

f = μmin * mg * cos(θ)

Now, substituting f = m * α from equation (3) into this equation, we get:

m * α = μmin * mg * cos(θ)

Rearranging the terms, we find the minimum coefficient of static friction (μmin) needed for the hoop to roll without slipping:

μmin = α / (g * cos(θ)) = (g * sin(θ) / 2) / (g * cos(θ)) = tan(θ) / 2

For more such questions on acceleration, click on:

https://brainly.com/question/30595126

#SPJ11

The magnitude of the linear acceleration of the falling bucket is 9.8 m/s^2. The magnitude of the linear acceleration of the falling bucket is equal to the acceleration due to gravity, which is 9.8 m/s^2.

A bucket with a mass of a kg is attached to a cylindrical, massive pulley with a radius of b m. The bucket starts from rest and falls for c s into a well. The tension in the rope is d N. To find the magnitude of the linear acceleration of the falling bucket, we can use the following equation:

F_net = ma

Where F_net is the net force acting on the bucket, m is the mass of the bucket, and a is the acceleration of the bucket.

We can find the net force acting on the bucket using the tension in the rope: F_net = T - mg, where T is the tension in the rope, and mg is the weight of the bucket. Since the bucket is falling, we know that a = -g (where g is the acceleration due to gravity, which is a constant -9.8 m/s^2). So we can set up the following equation: T - mg = maT - mg = m(-g)T = mg - mgT = m(-g)T = -mg

Know more about linear acceleration here:

https://brainly.com/question/13723307

#SPJ11

In a single-slit experiment, when the slit width is decreased, the first two minima in the diffraction pattern will spread out and move further away from the central maximum.

In a single-slit experiment, when light passes through a narrow slit, it diffracts and creates a pattern of bright and dark fringes on a screen placed behind the slit. The location of the fringes depends on the wavelength of the light, the distance between the slit and the screen, and the width of the slit.

1. The single-slit experiment is based on the principle of diffraction, where light passing through a narrow slit creates an interference pattern.
2. The diffraction pattern consists of a central maximum surrounded by alternating bright and dark fringes, called maxima and minima, respectively.
3. The positions of the minima are determined by the relationship: a * sin(θ) = m * λ, where 'a' is the slit width, 'θ' is the angle between the central maximum and the minima, 'm' is the order of the minima (1, 2, 3, etc.), and 'λ' is the wavelength of the light.
4. As the slit width 'a' decreases, the value of sin(θ) must increase to maintain equality, which means the angle 'θ' increases as well.
5. With an increased angle 'θ', the first two minima in the diffraction pattern move further away from the central maximum, causing the pattern to spread out.

Therefore, as the slit width is decreased in a single-slit experiment, the distance between the first two minima in the diffraction pattern will increase.

To know more about diffraction patterns click here:

https://brainly.com/question/12290582

#SPJ11

The potential energy change of the spring when its length changes from 0.21 m to 0.76 m is 0.000182 J  The change in the potential energy of a spring whose stiffness is 910 N/m and has a relaxed length of 0.53 m .

when its length changes from 0.21 m to 0.76 m is 3.37 J.Explanation:Potential energy (PE) of a spring is given by;PE = 1/2 kx²Where k is the spring constant/stiffness and x is the displacement from the equilibrium position of the spring.In this question, the spring's stiffness is given as 910 N/m and its relaxed length is 0.53 m. To find the change in potential energy of the spring when the length of the spring changes from 0.21 m to 0.76 m, we first need to find the displacement (x).The change in length is given as;∆x = 0.76 m - 0.21 m= 0.55 mThe displacement (x) is therefore;x = ∆x - l₀= 0.55 m - 0.53 m= 0.02 mThe spring's stiffness is given as 910 N/m. Therefore, the potential energy change of the spring is given as;PE = 1/2 kx²PE = 1/2 x 910 N/m x (0.02 m)²PE = 0.455 x 0.0004PE = 0.000182 JThe potential energy change of the spring when its length changes from 0.21 m to 0.76 m is 0.000182 J (rounded off to three significant figures).

learn more about  potential energy  here:

https://brainly.com/question/24284560

#SPJ4

The acceleration of the system still depends only on the difference in mass between the two masses, but the direction of the net force has changed, so the direction of acceleration has also changed.

When the masses are different, the system accelerates in the direction of the heavier mass. According to Newton's second law, the net force acting on each mass is equal to its mass times its acceleration:

F1 = m1a

F2 = m2a

where F1 and F2 are the tensions in the rope on either side of the pulley. Since the rope is inextensible and the pulley is ideal, the tension in the rope is the same on both sides, so F1 = F2 = T, where T is the tension in the rope.

Substituting T for F1 and F2 in the above equations and subtracting the second equation from the first, we get:

m1a - m2a = T - T

(m1 - m2)a = 0

Since the tension cancels out, the acceleration of the system depends only on the difference in mass between the two masses.

If the masses are switched, then the direction of the net force changes, and the system accelerates in the direction of the new heavier mass. The net force acting on each mass is still given by the above equations, but the masses are switched, so m1 is now the smaller mass, and m2 is the larger mass.

Substituting T for F1 and F2 in the above equations and subtracting the first equation from the second, we get:

m2a - m1a = T - T

(m2 - m1)a = 0

Since the tension cancels out, the acceleration of the system still depends only on the difference in mass between the two masses.

For such more question on acceleration:

https://brainly.com/question/460763

#SPJ11

Answer: The buoyancy required for it to float stationary in the water is 49000

Explanation:

Sirius, the brightest star in the night sky, is actually a binary star system. Sirius A is a main-sequence star, and Sirius B is a white dwarf. Nearly all the visible light we see from Sirius comes from Sirius A. But when we photograph the system with X-ray light, as shown , Sirius B is the brighter of the two stars because As a white dwarf, Sirius B is much hotter than Sirius A and thus emits more X-rays.

Sirius is a binary star system made up of two stars called Sirius A and Sirius B.  Sirius A is the larger and more massive star, while Sirius B is a smaller, denser, and hotter white dwarf. Sirius A is a main-sequence star, similar to our Sun, while Sirius B is the remnant of a star that has exhausted all of its nuclear fuel and has collapsed down to a dense core.

Although Sirius A is much brighter than Sirius B in visible light, as mentioned, Sirius B is actually the brighter of the two stars when observed in X-ray light. This is because as a white dwarf, Sirius B has a much smaller surface area than Sirius A, but is much hotter and therefore emits more energy per unit area.

The high temperature of Sirius B's surface causes it to emit a significant amount of X-ray radiation, which is why it appears brighter than Sirius A in X-ray images of the system.

For more such questions on Sirius, click on:

https://brainly.com/question/29503539

#SPJ11

The probable question may be:

sirius, the brightest star in the night sky, is actually a binary star system. sirius a is main-sequence star and sirius b is a white dwarf. nearly all the visible light we see from sirius comes from sirius a. but when we photograph the system with x-ray light, as shown here, sirius b is the brighter of the two stars. why?

Find the freezing point of the material and contrast it to that of other metals. Measure the metal's length and contrast it with the lengths of other metals. Also, contrast the metal's shape with those of other metals.

The air within the solar cooker receives energy from the water through the edges of the cook pot. The air outside solar cooker receives energy that is transferred from the gas within the solar cooker through sidewalls of the solar cooker.

Radiation is utilized to bake the s'mores in the hot cooker that is created in this exercise. When heat is transported without the presence of Sun and s'mores were in close proximity to one another  Electromagnetic waves that are passing through the air convey the heat.

To know more about Electromagnetic visit :

https://brainly.com/question/17057080

#SPJ9

The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.

The quantity of magnetic field traveling through a specific region or surface is measured by magnetic flux. It is described as the result of the area that the magnetic field travels through and its magnitude, where the area is perpendicular to the field's direction. The Weber is the magnetic flux SI unit (Wb)

Given that,

EMF = 18.0 mV = 0.018 V

N = 484 turns

(dΦ/dt) = 10.0 A/s

I = 3.60 A

The equation that relates the electromotive force (EMF) induced in a coil to the rate of change of magnetic flux is:

EMF = -N(dΦ/dt)

Rearranging the equation to solve for Φ:

Φ = -EMF/(N(d/dt))

   = -(0.018 V)/(484(10.0 ))

  = -3.72×10⁻⁶ Wb

The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.

To learn more about Magnetic flux, refer to:

https://brainly.com/question/29221352

#SPJ4

the change in entropy is: A- ΔS = Q/T = (105,000 J) / (273 K) = 384.6 J/K b-  ΔS = -Q/T = (-166,750 J) / (273 K) = -611.2 J/K,c- ΔS = -Q/T = (-209,300 J) / (373 K) = -560.4 J/K, d)- ΔS = Q/T = (1,128,500 J) / (373 K) = 3023.5 J/K

a) To calculate the change in entropy when heating 0.5 kg of solid ice from -100°C to 0°C, we can use the equation:

ΔS = Q/T

where Q is the heat transferred to the system and T is the temperature at which the heat transfer occurs. Since the system is receiving heat, the sign of ΔS will be positive.

The heat required to raise the temperature of the ice from -100°C to 0°C can be calculated as:

Q = mcΔT

where m is the mass of the ice, c is the specific heat capacity of ice, and ΔT is the change in temperature.

Using the values given, we get:

Q = (0.5 kg) (2100 J/kg°C) (100°C) = 105,000 J

Therefore, the change in entropy is:

ΔS = Q/T = (105,000 J) / (273 K) = 384.6 J/K

b)  Q = (0.5 kg) (333,500 J/kg) = 166,750 J

Therefore, the change in entropy is:

ΔS = -Q/T = (-166,750 J) / (273 K) = -611.2 J/K

c) Q = (0.5 kg) (4186 J/kg°C) (100°C) = 209,300 J

Therefore, the change in entropy is:

ΔS = -Q/T = (-209,300 J) / (373 K) = -560.4 J/K

d) Q = (0.5 kg) (2,257,000 J/kg) = 1,128,500 J

Therefore, the change in entropy is:

ΔS = Q/T = (1,128,500 J) / (373 K) = 3023.5 J/K

e) The change in entropy for vaporizing water (3023.5 J/K) is larger

To learn more about change in entropy  here:

https://brainly.com/question/30691597

#SPJ11

The total amount of energy radiated by the accretion disk during the history of the black hole is approximately  6.44 x 10^53 Joules. The average luminosity of the accretion disk  is approximately 2.04 x 10^37 Watts.

The average luminosity of the accretion disk is slightly lower than the luminosity of the Milky Way.

To determine the total amount of energy radiated by the accretion disk during the history of the black hole, we can use the mass-energy equivalence formula, E=mc^2, where E is the energy, m is the mass, and c is the speed of light (approx. 3x10^8 m/s).

First, we find 10% of the black hole's mass: 0.1 x 36 million solar masses = 3.6 million solar masses. Then, we convert this mass to kilograms: 3.6 million solar masses x (1.989 x 10^30 kg/solar mass) ≈ 7.16 x 10^36 kg.

Next, we calculate the energy: E = (7.16 x 10^36 kg) x (3 x 10^8 m/s)^2 ≈ 6.44 x 10^53 Joules.
To find the average luminosity of the accretion disk, we divide the total energy by the time it radiated that energy: 6.44 x 10^53 Joules / (10 billion years x 3.1536 x 10^7 s/year) ≈ 2.04 x 10^37 Watts.

Comparing the average luminosity of the accretion disk to the luminosity of the Milky Way, which is around 3 x 10^37 Watts, we see that the average luminosity of the accretion disk is slightly lower than the luminosity of the Milky Way.

For more such questions on luminosity, click on:

https://brainly.com/question/6933301

#SPJ11

A coil has an inductance of 7.00 mh, and the current in it changes from 0.200 a to 1.50 a in a time interval of 0.150 s. The magnitude of the average induced emf in the coil during this time interval is 0.72 V.

What is induced EMF, The induced EMF (electromotive force) is the voltage that is generated when a magnetic field passes through a conductor or is generated when a conductor moves through a magnetic field.

The formula for the magnitude of the average induced EMF in a coil is given by the following formula;

E = L (ΔI / Δt)

Where L is the inductance of the coil, ΔI is the change in current, and Δt is the time interval.

Substituting the given values,

L = 7.00 mH = 7.00 × 10-3 HΔI

= 1.50 A − 0.200 A

= 1.30 AΔt

= 0.150

sE = L (ΔI / Δt) = (7.00 × 10-3 H) (1.30 A / 0.150 s)E

= 0.072 V

therefore, The magnitude of the average induced EMF in the coil during this time interval is 0.72 V.

For more such questions on magnitude

brainly.com/question/17329842

#SPJ11

The centripetal acceleration of the car rounding the curve is 6.4 m/s².

The following formula determines the centripetal acceleration of an item travelling in a circular path:

a = v² / r

a = v² / r

a = (16 m/s)² / 40 m

a = 6.4 m/s²

Acceleration is the rate of change of velocity. It is a vector quantity that describes how much an object's velocity changes per unit of time. Acceleration can be positive or negative, depending on whether an object is speeding up or slowing down, respectively. Acceleration can also occur when the direction of an object's motion changes, even if its speed remains constant. This is called centripetal acceleration and is responsible for the circular motion of objects, such as a car turning a corner or a planet orbiting a star.

Acceleration plays an important role in many areas of physics and engineering, including mechanics, electromagnetism, and relativity. It is also crucial for understanding everyday phenomena, such as the motion of vehicles, the behavior of roller coasters, and the forces experienced by astronauts during spaceflight.

To learn more about Acceleration visit here:

brainly.com/question/30660316

#SPJ4

The tension in the horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface is 7.5 N.

When calculating the tension in a horizontal string that whirls a 2.0- kg toy in a circle of radius 2.7 m when it moves at 3.2 m/s on an icy surface, there are various concepts to understand. Below are the steps to solve the given problem:

Step 1: Draw a free body diagram of the toy attached to the horizontal string. When an object is moving in a circular path, there must be a force acting on the object to make it move in a circle. In this case, the horizontal string exerts a force on the toy.

Step 2: Write down the formula for the force required to move an object in a circular path. The formula is given as F = m(v^2/r), where F is the force required, m is the mass of the object, v is the velocity of the object, and r is the radius of the circle.

Step 3: Substitute the given values in the above formula.

The mass of the toy is 2.0 kg, its velocity is 3.2 m/s, and the radius of the circle is 2.7 m.

F = (2.0 kg)(3.2 m/s)^2 / 2.7 m

= 7.5 N.

The tension in the horizontal string is 7.5 N.

To learn more about : tension

https://brainly.com/question/24994188

#SPJ11

Since the box is not accelerating in any direction, Person 1 must be pulling with a force of 100 N in the opposite direction.

Since the box is not accelerating in any direction, the sum of the forces in each direction must be zero.

In the x-direction, there are no forces since the ice offers no resistance. In the y-direction, the forces balance out.

Let F1 be the force that person 1 is pulling with.

F1(sin 90) + 100(sin 90) = 0

F1 = 0 - 100(1)

F1 = -100 N

Learn more about forces at: https://brainly.com/question/12970081

#SPJ1

The index of refraction must be 2, which is not physically possible, for a converging lens with two curved surfaces.

The central length of a combining focal point with two bended surfaces is given by the recipe 1/f = (n-1)[(1/R1) - (1/R2)], where f is the central length, n is the record of refraction, R1 and R2 are the radii of shape of the two surfaces. For this situation, the two surfaces have a span of shape of 10 cm, and the central length is likewise 10 cm. Accordingly, we can substitute these qualities into the equation and tackle for n:

1/10 = (n-1)[(1/10) - (1/10)]

n-1 = 1

n = 2

Hence, the record of refraction should be 2. It's quite significant that this worth isn't truly workable for a material to have, as the refractive file of any material should be more noteworthy than or equivalent to 1. Nonetheless, this outcome recommends that the focal point being referred to has an uncommon shape or material properties.

To learn more about converging lens, refer:

https://brainly.com/question/15563158

#SPJ4