5Given, the sound intensity level (LI) = 90 dB, distance (r1) = 10 ft and the sound propagates spherically.We need to find the sound intensity at the first location I, and sound intensity level LI, at a distance of 20 ft, 40 ft, and 80 ft away from the source.
Using the formula to calculate sound intensity level:LI = 10 log(I/I0)Where I0 is the threshold intensity = 1 x 10^-12 W/m^2.Calculating the sound intensity at the first location I:LI = 10 log(I/I0)90 = 10 log(I/I0)9 = log(I/I0)I/I0 = 10^9I = I0 x 10^9Substituting the value of I0, we get:I = 1 x 10^-12 x 10^9 = 1 W/m^2The sound intensity at the first location I = 1 W/m^2.At 20 feet away from the source:
Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 20 ft.At 20 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (20/10)^2 = 1/4 = 0.25 W/m^2Sound intensity level LI at 20 feet away:LI = 10 log(I/I0)LI = 10 log(0.25/1 x 10^-12)LI = 10 log(2.5 x 10^11)LI = 10 x 11.4 = 114 dBThe sound intensity at 20 feet away I = 0.25 W/m^2 and sound intensity level LI = 114 dB.At 40 feet away from the source:Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 40 ft.At 40 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (40/10)^2 = 1/16 = 0.0625 W/m^2Sound intensity level LI at 40 feet away:LI = 10 log(I/I0)LI = 10 log(0.0625/1 x 10^-12)LI = 10 log(6.25 x 10^10)LI = 10 x 10.8 = 108 dB
The sound intensity at 40 feet away I = 0.0625 W/m^2 and sound intensity level LI = 108 dB.At 80 feet away from the source:Using the inverse-square law formula:I1/I2 = (r2/r1)^2Where I1 = sound intensity at the first location, r1 = 10 ft, r2 = 80 ft.At 80 ft away, I2 = ?I1/I2 = (r2/r1)^2I2 = I1/ (r2/r1)^2I2 = 1/ (80/10)^2 = 1/64 = 0.015625 W/m^2Sound intensity level LI at 80 feet away:LI = 10 log(I/I0)LI = 10 log(0.015625/1 x 10^-12)LI = 10 log(1.5625 x 10^10)LI = 10 x 10.2 = 102 dBThe sound intensity at 80 feet away I = 0.015625 W/m^2 and sound intensity level LI = 102 dB.Difference in dB at each location:LocationDifference in dBFirst location0 dB20 feet away6 dB40 feet away12 dB80 feet away18 dB
Learn more about Sound here,
https://brainly.com/question/16093793
#SPJ11
Which of the following is correct in AC circuits? For a given peak voltage, the peak current is inversely proportional to capacitance, inversely proportional to inductance, and directly proportional to resistance. For a given peak voltage, the peak current is directly proportional to resistance, directly proportional to capacitance, and inversely proportional to inductance. For a given peak voltage, the peak current is inversely proportional to resistance, inversely proportional to capacitance, and inversely proportional to inductance. For a given peak voltage, the peak current is directly proportional to capacitance, inversely proportional to inductance, and inversely proportional to resistance.
For a given peak voltage, the peak current in an AC circuit is directly proportional to resistance, inversely proportional to capacitance, and inversely proportional to inductance.
In an AC circuit, the relationship between peak voltage (Vp), peak current (Ip), resistance (R), capacitance (C), and inductance (L) can be described using Ohm's Law and the formulas for capacitive reactance (Xc) and inductive reactance (Xl).
Ohm's Law states that Vp = Ip * R, where Vp is the peak voltage and R is the resistance. According to Ohm's Law, the peak current is directly proportional to resistance. Therefore, for a given peak voltage, the peak current is directly proportional to resistance.
In a capacitive circuit, the capacitive reactance (Xc) is given by Xc = 1 / (2πfC), where f is the frequency of the AC signal and C is the capacitance. The higher the capacitance, the lower the capacitive reactance. Therefore, for a given peak voltage, the peak current is inversely proportional to capacitance.
In an inductive circuit, the inductive reactance (Xl) is given by Xl = 2πfL, where L is the inductance. The higher the inductance, the higher the inductive reactance. Therefore, for a given peak voltage, the peak current is inversely proportional to inductance.
Thus, the correct statement is: For a given peak voltage, the peak current is directly proportional to resistance, inversely proportional to capacitance, and inversely proportional to inductance.
Learn more about Ohm's Law here:
https://brainly.com/question/1247379
#SPJ11
An inductor in the form of a solenoid contains 400 turns and is 15.4 cm in length. A uniform rate of decrease of current through the inductor of 0.421 A/s induces an emf of 175 PV. What is the radius of the solenoid? mm
Given: Number of turns (N) = 400, Length of solenoid (l) = 15.4 cm = 0.154 m, Rate of change of current (dI/dt) = 0.421 A/s, Induced emf (emf) = 175 PV = 175 * 10^(-12) V.
Using the formula L = (μ₀ * N² * A) / l . We can solve for the radius (R) using the formula for the cross-sectional area (A) of a solenoid:
R = √(A / π) the radius of the solenoid is approximately 0.318 mm.
To find the radius of the solenoid, we can use the formula for the self-induced emf in an inductor:
emf = -L * (dI/dt)
Where: emf is the induced electromotive force (in volts),
L is the self-inductance of the solenoid (in henries),
dI/dt is the rate of change of current through the inductor (in amperes per second).
We are given:
emf = 175 PV (pico-volts) = 175 * 10⁻¹² V,
dI/dt = 0.421 A/s,
Number of turns, N = 400,
Length of solenoid, l = 15.4 cm = 0.154 m.
Now, let's calculate the self-inductance L:
emf = -L * (dI/dt)
175 * 10⁻¹² V = -L * 0.421 A/s
L = (175 * 10⁻¹² V) / (0.421 A/s)
L = 4.15 * 10⁻¹⁰ H
The self-inductance of the solenoid is 4.15 * 10⁻¹⁰ H.
The self-inductance of a solenoid is given by the formula:
L = (μ₀ * N² * A) / l
Where:
μ₀ is the permeability of free space (μ₀ = 4π * 10⁻⁷ T·m/A),
N is the number of turns,
A is the cross-sectional area of the solenoid (in square meters),
l is the length of the solenoid (in meters).
We need to solve this equation for the radius, R, of the solenoid.
Let's rearrange the formula for self-inductance to solve for A:
L = (μ₀ * N² * A) / l
A = (L * l) / (μ₀ * N²)
Now, let's substitute the given values and calculate the cross-sectional area, A:
A = (4.15 * 10⁻¹⁰ H * 0.154 m) / (4π * 10⁻⁷ T·m/A * (400)^2)
A ≈ 4.01 * 10⁻⁸ m²
The cross-sectional area of the solenoid is approximately 4.01 * 10⁻⁸ m².
The cross-sectional area of a solenoid is given by the formula:
A = π * R²
We can solve this equation for the radius, R, of the solenoid:
R = √(A / π)
Let's calculate the radius using the previously calculated cross-sectional area, A:
R = √(4.01 * 10⁻⁸ m² / π)
R ≈ 3.18 * 10⁻⁴ m
To convert the radius to millimeters, multiply by 1000:
Radius = 3.18 * 10⁻⁴ m * 1000
Radius ≈ 0.318 mm
The radius of the solenoid is approximately 0.318 mm.
Learn more about solenoid here
https://brainly.com/question/15504705
#SPJ11
What is the magnitude of the force of friction an object receives if the coefficient of friction between the object and the surface it is on is 0.49 the object experiences a normal force of magnitude 229N?
Ff= Unit=
The magnitude of the force of friction acting on the object is approximately 112.21N. The unit for the force of friction is the same as the unit for the normal force, which in this case is Newtons (N).
The magnitude of the force of friction an object receives can be calculated using the equation Ff = μN, where Ff is the force of friction, μ is the coefficient of friction, and N is the normal force. In this case, with a coefficient of friction of 0.49 and a normal force of 229N, the force of friction can be calculated.
The force of friction experienced by an object can be determined using the equation Ff = μN, where Ff represents the force of friction, μ is the coefficient of friction, and N is the normal force. The coefficient of friction is a dimensionless value that quantifies the interaction between two surfaces in contact. In this scenario, the coefficient of friction is given as 0.49, and the normal force is 229N.
To find the force of friction, we can substitute the given values into the equation:
Ff = (0.49)(229N)
Ff ≈ 112.21N
Learn more about force of friction:
https://brainly.com/question/30280206
#SPJ11
A 1.66 kg mass is sliding across a horizontal surface an initial velocity of 10.4 m/s i. If the object then comes to a stop over a time of 3.32 seconds, what must the coefficient of kinetic be? Assume that only friction, the normal force, and the force due to gravity are acting on the mass. Enter a number rounded to 3 decimal places. Question 20 5 pts A mass of 2.05 kg is released from rest while upon an incline of 30.6 degrees. If the coefficient of kinetic friction regarding the system is known to be 0.454, what amount of time will it take the mass to slide a distance of 3.02 m down the incline?
Hence, the amount of time taken by the mass to slide a distance of 3.02 m down the incline is 1.222 seconds (approx).
According to the given problem,Mass, m = 1.66 kgInitial velocity, u = 10.4 m/sFinal velocity, v = 0Time, t = 3.32 sFrictional force, fGravity, gNormal force, NWe need to find the coefficient of kinetic friction, μk.Let's consider the forces acting on the mass:Acceleration, a can be given as:f - μkN = maWhere, we know that a = (v - u)/tPutting the values:f - μkN = m(v - u)/tSince the mass comes to rest, the final velocity, v = 0. Hence,f - μkN = -mu = maPutting the values, we get:f - μkN = -m(10.4)/3.32f - μkN = -31.4024Newton's second law can be applied along the y-axis:N - mgcosθ = 0N = mgcosθPutting the values,N = (1.66)(9.8)(cos 0) = 16.2688 NNow, we need to calculate the frictional force, f. Using the formula:f = μkNPutting the values,f = (0.540)(16.2688) = 8.798 NewtonsNow, we can substitute the values of frictional force, f and normal force, N in the equation:f - μkN = -31.4024(8.798) - (0.540)(16.2688) = -31.4024μk= - 3.3254μk = 0.363 (approx) Hence, the value of coefficient of kinetic friction, μk = 0.363 (approx).According to the given problem: Mass, m = 2.05 kg Inclination angle, θ = 30.6 degrees Coefficient of kinetic friction, μk = 0.454Distance, s = 3.02 mWe need to find the time taken by the mass to slide down the incline. Let's consider the forces acting on the mass: Acceleration, a can be given as:gsinθ - μkcosθ = aWhere, we know that a = s/tPutting the values,gsinθ - μkcosθ = s/tHence,t = s/(gsinθ - μkcosθ)Putting the values,t = 3.02/[(9.8)(sin 30.6) - (0.454)(9.8)(cos 30.6)]t = 1.222 seconds (approx). Hence, the amount of time taken by the mass to slide a distance of 3.02 m down the incline is 1.222 seconds (approx).
To know more about mass visit:
https://brainly.com/question/13210941
#SPJ11
Reverberation time is the time taken by reflected sound to decay by 60 dB from the original sound level. Discuss why direct sound could not be heard in a live room.
Reasons why direct sound could not be heard in a live room are Reverberation, Reflections, and Distortion.
Reverberation time is the time taken by reflected sound to decay by 60 dB from the original sound level. Direct sound could not be heard in a live room due to the following reasons:
Reasons why direct sound could not be heard in a live room are as follows:
1. Reverberation: The direct sound is quickly absorbed by the listener or reflected off the walls in an uncontrolled fashion in a small, untreated room. The time difference between the direct sound and the first reverberation makes it difficult to hear the direct sound. Reverberation, in general, masks the direct sound. This makes it difficult to hear the direct sound as it is drowned out by the reverberant sound.
2. Reflections: The sound can be reflected in many directions by walls, floors, and ceilings. This creates multiple reflections of sound in a room, which causes a 'comb-filtering' effect. This can cause dips or peaks in the frequency response of the room. This makes the sound in a live room sound hollow and unnatural.
3. Distortion: The direct sound can be distorted when it reaches the listener in a live room due to reflections and other factors. This distortion can cause the sound to be harsh, harsh, and brittle. This makes it difficult to listen to music in a live room.
Learn more about sound here:
https://brainly.com/question/32257037
#SPJ11
Electromagnetic waves (multiple Choice) Which of these are electromagnetic waves? a. visible light b. TV signals c. cosmic rays d. Radio signals e. Microwaves f. Infrared g. Ultraviolet h. X-Rays 1. gamma rays
The electromagnetic waves among the given options are: a. Visible light b. TV signals d. Radio signals e. Microwaves f. Infrared g. Ultraviolet h. X-Rays
Electromagnetic waves are waves that consist of oscillating electric and magnetic fields. They are produced by the acceleration of electric charges or by changes in the magnetic field. These waves do not require a medium for their propagation and can travel through vacuum. They are characterized by their wavelength and frequency, which determine their properties such as energy and interaction with matter.
Visible light is the portion of the electromagnetic spectrum that is visible to the human eye. It consists of different colors ranging from red to violet, each with a specific wavelength and frequency.
TV signals and radio signals are both forms of electromagnetic waves used for communication. TV signals carry audio and visual information, while radio signals are used for radio broadcasting and communication.
Microwaves are electromagnetic waves with shorter wavelengths than radio waves. They are used for various applications such as cooking, communication, and radar technology.
Infrared, ultraviolet, and X-rays are all part of the electromagnetic spectrum, with infrared having longer wavelengths than visible light, ultraviolet having shorter wavelengths, and X-rays having even shorter wavelengths. They are used in a wide range of applications, including heating, sterilization, imaging, and medical diagnostics.
Cosmic rays, on the other hand, are not electromagnetic waves. They are high-energy particles, such as protons and atomic nuclei, that originate from outer space and can interact with the Earth's atmosphere.
In summary, electromagnetic waves include visible light, TV signals, radio signals, microwaves, infrared, ultraviolet, and X-rays. Each of these types of waves has distinct properties and applications in various fields of science and technology.
Learn more about em waves here:
https://brainly.com/question/30171018
#SPJ11
A light ray is incident at an angle of 20° on the surface between air and water. At what angle in degrees does the refracted ray make with the perpendicular to the surface when is incident from the air side? Use index of refraction for air as 1.0 while water 1.33. (Express your answer in 2 decimal place/s, NO UNIT REQUIRED)
When a light ray passes from air to water, it refracts bends due to the change in refractive index. In this case, the angle of incidence is 20° and the refracted ray makes an angle of 27.53° with the perpendicular to the surface.
When a light ray passes from one medium to another, it bends due to the change in speed caused by the change in the refractive index of the materials. The relationship between the angles of incidence and refraction is given by Snell's Law, which states that:
n₁sinθ₁ = n₂sinθ₂
where n₁ and n₂ are the refractive indices of the two media, θ₁ is the angle of incidence, and θ₂ is the angle of refraction.
In this problem, n₁ = 1.0 (the refractive index of air) and n₂ = 1.33 (the refractive index of water). The angle of incidence θ₁ = 20°.
Using Snell's law, we can solve for the angle of refraction θ₂:
sinθ₂ = (n₁/n₂)sinθ₁
sinθ₂ = (1.0/1.33)sin20°
sinθ₂ = 0.4494
Taking the inverse sine of both sides, we get:
θ₂ = 27.53°
Therefore, the refracted ray makes an angle of 27.53° with the perpendicular to the surface when it is incident from the air side.
To know more about refraction, visit:
brainly.com/question/14760207
#SPJ11
You reproduce Young's experiment using a helium-neon laser. If the distance
between five black bangs is 2.1 cm, the distance from the screen is 2.5 m and the distance
between the two slits is 0.30 mm, determine the wavelength of the laser.
To determine the wavelength of a helium-neon laser in Young's experiment, we can use the formula for fringe separation.
Given the distance between five black bands, the distance from the screen, and the distance between the two slits, we can calculate the wavelength of the laser.
In Young's experiment, the fringe separation can be given by the formula Δy = λL/d, where Δy is the distance between fringes (in this case, the distance between five black bands), λ is the wavelength of the laser, L is the distance from the screen, and d is the distance between the two slits.
Rearranging the formula, we have λ = Δy * d / L. Plugging in the given values of Δy = 2.1 cm, d = 0.30 mm, and L = 2.5 m, we can calculate the wavelength of the laser.
Learn more about fringe separation here:
https://brainly.com/question/12288897
#SPJ11
What is the Nature of Science and interdependence of science, engineering, and technology regarding current global concerns?
Discuss a current issue that documents the influence of engineering, technology, and science on society and the natural world.
And answer the following questions:
How has this issue developed (history)?
What are the values and attitudes that interact with this issue?
What are the positive and negative impacts associated with this issue?
What are the current and alternative policies associated with this issue and what are the strategies for achieving these policies?
The issue of reducing fossil fuel use and mitigating climate change requires the development of alternative energy sources through science, engineering, and technology. This involves implementing policies such as carbon taxes, incentives for renewable energy, and investment in research and development.
The nature of science refers to the methodology and principles that scientists use to investigate the natural world. It is the system of obtaining knowledge through observation, testing, and validation. On the other hand, engineering involves designing, developing, and improving technology and machines to address social and economic needs. Technology is the application of scientific knowledge to create new products, devices, and tools that improve people’s quality of life.
One current global concern is the use of fossil fuels and the resulting greenhouse gas emissions that contribute to climate change. The interdependence of science, engineering, and technology is crucial to developing alternative energy sources that can reduce our dependence on fossil fuels.
How has this issue developed (history)?
The burning of fossil fuels has been an integral part of the world economy for over a century. As the world population and economy have grown, the demand for energy has increased, resulting in increased greenhouse gas emissions. The development of alternative energy sources has been ongoing, but it has not yet been adopted on a large scale.
What are the values and attitudes that interact with this issue?
Values and attitudes towards climate change and the environment are essential factors in determining how society deals with this issue. There is a need for increased awareness and understanding of the issue and the need for action. However, some people may resist change due to economic or political interests.
What are the positive and negative impacts associated with this issue?
Positive impacts of alternative energy sources include reduced greenhouse gas emissions and air pollution, improved public health, and the creation of new job opportunities. Negative impacts include the high initial cost of implementing alternative energy sources and the potential loss of jobs in the fossil fuel industry.
What are the current and alternative policies associated with this issue and what are the strategies for achieving these policies?
Current policies include carbon taxes, renewable energy incentives, and regulations on greenhouse gas emissions. Alternative policies include cap-and-trade systems and subsidies for renewable energy research and development. Strategies for achieving these policies include increased public awareness and education, political advocacy, and investment in research and development.
Learn more about technology
https://brainly.com/question/7788080
#SPJ11
An energy of 30.0 eV is required to ionize a molecule of the gas inside a Geiger tube, thereby producing an ion pair. Suppose a particle of ionizing radiation deposits 0.430 MeV of energy in this Geiger tube. What maximum number of ion pairs can it create?
The maximum number of ion pairs that the particle of ionizing radiation can create is 7167 ion pairs.
Geiger-Muller counters or tubes are used to detect ionizing radiation. Ionization chambers are used to measure radiation levels in the environment. Ionization is a process that involves the removal of electrons from an atom or molecule, converting it to a positively charged ion. The amount of energy required to ionize an atom or molecule is dependent on its electron arrangement.
The amount of energy required to ionize a molecule of gas in a Geiger tube is 30.0 eV. A particle of ionizing radiation deposits 0.430 MeV of energy in this Geiger tube, which means that the particle has enough energy to ionize a number of molecules of gas inside the tube. Therefore, we have to find the maximum number of ion pairs that it can create.
The first step in calculating the maximum number of ion pairs is to find the number of electrons that can be ionized by the particle of ionizing radiation.
The number of electrons that can be ionized by the particle of ionizing radiation can be found using the following formula:
Number of electrons ionized = Energy deposited / Ionization energyIn this case, the energy deposited is 0.430 MeV or 430,000 eV, and the ionization energy is 30.0 eV.
Number of electrons ionized = 430,000 eV / 30.0 eV = 14,333.33
The maximum number of ion pairs can be found by dividing the number of electrons ionized by 2, since each ionization produces a positive ion and a free electron.
Maximum number of ion pairs = Number of electrons ionized / 2Maximum number of ion pairs = 14,333.33 / 2 = 7167 ion pairs
Therefore, the maximum number of ion pairs that the particle of ionizing radiation can create is 7167 ion pairs.
Learn more about radiation at: https://brainly.com/question/31285748
#SPJ11
5 kg of water at 68°C is put into a refrigerator with a compressor with power of 100 W. The water is frozen to ice at 0°C in 64.34 mins. Calculate the COP of the refrigerator. a) 11.0 12. e) 23.0 b) 35.0 c) 20.0 d) 32.0 g) 29.0 h) 14.0 | i) 17.0 f) 8.0 j) 26.0
The closest option from the given choices is (f) 8.0. To calculate the coefficient of performance (COP) of the refrigerator, we need to use the formula:
COP = (Useful cooling effect)/(Work input)
First, let's calculate the useful cooling effect. The water is initially at 68°C and is cooled down to 0°C. The specific heat capacity of water is approximately 4.186 J/g°C.
Useful cooling effect = mass of water × specific heat capacity of water × change in temperature
= 5000 g × 4.186 J/g°C × (68°C - 0°C)
= 1,129,240 J
Next, let's calculate the work input. The power of the compressor is given as 100 W, and the time taken for the water to freeze is 64.34 minutes. We need to convert the time to seconds.
Work input = power × time
= 100 W × (64.34 mins × 60 s/min)
= 38,604 J
Now we can calculate the COP:
COP = Useful cooling effect / Work input
= 1,129,240 J / 38,604 J
≈ 29.2
The closest option from the given choices is (f) 8.0.
Learn more about work here:
https://brainly.com/question/30073908?
#SPJ11
The period of a simple pendulum on the surface of Earth is 2.29 s. Determine its length .
A simple pendulum is a mass suspended from a cable or string that swings back and forth. The period of a simple pendulum is the time it takes to complete one cycle or oscillation. The length of the simple pendulum is approximately 0.56 meters.
The formula for the period of a simple pendulum is:
T = 2π√(L/g)
Where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. Since the period of the pendulum and the acceleration due to gravity on Earth are known, we can use this formula to solve for L.
T = 2.29 s (given)
g = 9.81 m/s² (acceleration due to gravity on Earth)
We can now solve for L:
L = (T²g)/(4π²)
Substitute the values: L = (2.29 s)²(9.81 m/s²)/(4π²)
L = 0.56 m (rounded to two decimal places)
To learn more about simple pendulum, refer:-
https://brainly.com/question/29183311
#SPJ11
A vector A is defined as: A=−2.62i^+−5.91j^. What is θA, the direction of A ? Give your answer as an angle in degrees and in standard form. Round your answer to one (1) decimal place. If there is no solution or if the solution cannot be found with the information provided, give your answer as: −1000
Answer: the answer is 67.8.
The given vector A is A = -2.62i - 5.91j.
The direction of vector A can be found using the formula θA = tan⁻¹(y/x),
where x is the horizontal component and y is the vertical component of vector A.
In this case, x = -2.62 and y = -5.91. So,
θA = tan⁻¹(-5.91/-2.62)
θA = tan⁻¹(2.25)
θA = 67.8 degrees.
Therefore, the direction of vector A is 67.8 degrees in standard form.
Thus, the answer is 67.8.
Learn more about vector: https://brainly.com/question/25705666
#SPJ11
A 79 kg man is pushing a 31 kg shopping trolley. The man and the shopping trolley move forward together with a maximum forward force of 225 N. Assuming friction is zero, what is the magnitude of the force (in N) of the man on the shopping trolley?
Hint: It may be easier to work out the acceleration first.
Hint: Enter only the numerical part of your answer to the nearest integer.
The magnitude of the force (in N) of the man on the shopping trolley is 64 N.
The magnitude of the force (in N) of the man on the shopping trolley is 172 N.Let's calculate the acceleration of the man and the shopping trolley using the formula below:F = maWhere F is the force, m is the mass, and a is the acceleration.The total mass is equal to the sum of the man's mass and the shopping trolley's mass. So, the total mass is 79 kg + 31 kg = 110 kg.The maximum forward force is given as 225 N. Therefore,225 N = 110 kg x aSolving for a gives,a = 2.0455 m/s².
Now, let's calculate the force (in N) of the man on the shopping trolley. Using Newton's second law of motion,F = maWhere F is the force, m is the mass, and a is the acceleration.Substituting the values we have, we get:F = 31 kg x 2.0455 m/s²F = 63.5 NTherefore, the magnitude of the force (in N) of the man on the shopping trolley is:F + 79 kg x 2.0455 m/s² = F + 161.44 N (By Newton's Second Law)F = 225 N - 161.44 NF = 63.56 N ≈ 64 N.Rounding it off to the nearest integer, the magnitude of the force (in N) of the man on the shopping trolley is 64 N.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
Question 10 (2 points) Listen A concave mirror has a focal length of 15 cm. An object 1.8 cm high is placed 22 cm from the mirror. The image description is and Oreal; upright virtual; upright virtual; inverted real; inverted Question 11 (2 points) Listen Which one of the following statements is not a characteristic of a plane mirror? The image is real. The magnification is +1. The image is always upright. The image is reversed right to left.
The image description for the given concave mirror is inverted and real. Now, considering the characteristics of a plane mirror, the statement that is not true is: The image is real.
In a plane mirror, the image formed is always virtual, meaning it cannot be projected onto a screen. The reflected rays appear to come from behind the mirror, forming a virtual image. Therefore, the statement "The image is real" is not a characteristic of a plane mirror.
The other statements are true for a plane mirror:
The magnification is +1: The magnification of a plane mirror is always +1, which means the image is the same size as the object. The image is always upright: The image formed by a plane mirror is always upright, meaning it has the same orientation as the object.
The image is reversed right to left: The image in a plane mirror appears to be reversed from left to right, but not from right to left. This reversal is due to the mirror's reflective properties.
In summary, the statement "The image is real" is not a characteristic of a plane mirror.
Learn more about mirror here:
https://brainly.com/question/3627454
#SPJ11
How should you place a rectangular box on a table such that it
exerts the maximum pressure on it?. Explain
To exert the maximum pressure, the box should be placed in such a way that the force is concentrated on the smallest possible area of the bottom of the box in contact with the table. This can be achieved by placing the box on its edge or on one of its corners.
When a rectangular box is placed on a table, the pressure exerted on the table is the force of the box divided by the area of the bottom of the box in contact with the table. Therefore, to exert the maximum pressure, the box should be placed in such a way that the force is concentrated on the smallest possible area of the bottom of the box in contact with the table. This can be achieved by placing the box on its edge or on one of its corners.
When the box is placed on its edge, only a small area of the bottom of the box is in contact with the table, resulting in a higher pressure.
Similarly, when the box is placed on one of its corners, only a single point of the bottom of the box is in contact with the table, resulting in an even higher pressure.
It is important to note that this method of maximizing pressure is not always desirable as it can damage the table or the box. In practical situations, it is recommended to distribute the weight of the box evenly over the surface of the table to avoid damage and ensure stability.
Learn more about pressure at: https://brainly.com/question/28012687
#SPJ11
Workmen are trying to free an SUV stuck in the mud. To extricate the vehicle, they use three horizontal ropes, producing the force vectors shown in the figure. (Figure 1) Take F 1
=853 N,F 2
=776 N, and F 3
= 386 N. Figure 1 of 1 Find the x components of each of the three pulls. Express your answers in newtons to three significant figures separated by commas. Part B Find the y components of each of the three puils. Express your answers in newtons to three significant figures separated by commas. Use the components to find the magnitude of the resultant of the three pulls. Express your answer in newtons to three significant figures. Part D Use the components to find the direction of the resultant of the three pulls. Express your answer as the angle counted from +x axis in the counterclockwise direction.
Part A: The x components of the three pulls are 698 N, 594 N, and 193 N.
Part B: The y components of the three pulls are 489 N, 502 N, and 334 N.
Part C: The magnitude of the resultant of the three pulls is 1427 N.
Part D: the direction of the resultant of the three pulls is 44.5 degrees counted from the +x axis in the counterclockwise direction.
Part A:
To find the x components of each of the three pulls:
F1x= F1cos(35)
F1x = 853 cos(35)N = 698 N
F2x = F2cos(40)
F2x = 776 cos(40)N = 594 N
F3x = F3cos(60)
F3x = 386 cos(60)N = 193 N
Thus, the x components of the three pulls are 698 N, 594 N, and 193 N.
Part B:
To find the y components of each of the three pulls:
F1y= F1sin(35)
F1y = 853 sin(35)N = 489 N
F2y = F2sin(40)
F2y = 776 sin(40)N = 502 N
F3y = F3sin(60)
F3y = 386 sin(60)N = 334 N
Thus, the y components of the three pulls are 489 N, 502 N, and 334 N.
Part C: To find the magnitude of the resultant of the three pulls:
R = √(Rx^2 + Ry^2)
R = √[(698 N + 594 N + 193 N)^2 + (489 N + 502 N + 334 N)^2]
R = 1427 N
Thus, the magnitude of the resultant of the three pulls is 1427 N.
Part D: To find the direction of the resultant of the three pulls:
θ = tan^-1(Ry/Rx)θ = tan^-1[(489 N + 502 N + 334 N)/(698 N + 594 N + 193 N)]
θ = 44.5 degrees
Thus, the direction of the resultant of the three pulls is 44.5 degrees counted from the +x axis in the counterclockwise direction.
To learn about magnitude here:
https://brainly.com/question/30337362
#SPJ11
Find solutions for your homework
science
earth sciences
earth sciences questions and answers
no need explanation, just give me the answer pls 8. select all the properties that are true concerning terrestrial and jovian planets in our solar system. a. terrestrial planets are large compared to jovian planets. b. terrestrial planets have many natural satellites compared to jovian planets.
Question: No Need Explanation, Just Give Me The Answer Pls 8. Select All The Properties That Are True Concerning Terrestrial And Jovian Planets In Our Solar System. A. Terrestrial Planets Are Large Compared To Jovian Planets. B. Terrestrial Planets Have Many Natural Satellites Compared To Jovian Planets.
No need explanation, just give me the answer pls
8. Select all the properties that are true concerning terrestrial and Jovian planets in our solar system.
A.Terrestrial planets are large compared to Jovian planets.B.Terrestrial planets have many natural satellites compared to Jovian planets.C.Terrestrial planets are found in the inner solar system.D.Terrestrial planets rotate faster than Jovian planets.E.Terrestrial planets have few moons compared to Jovian planets.F.Terrestrial planets are denser than Jovian planets.G.Terrestrial planets are less dense than Jovian planets.
A. Terrestrial planets are large compared to Jovian planets: This option is incorrect. Terrestrial planets, such as Earth, Mars, Venus, and Mercury, are generally smaller in size compared to Jovian planets.
C. Terrestrial planets are found in the inner solar system: This option is correct. Terrestrial planets are primarily located closer to the Sun, in the inner regions of the solar system.
F. Terrestrial planets are denser than Jovian planets: This option is correct. Terrestrial planets have higher average densities compared to Jovian planets. This is because terrestrial planets are composed of mostly rocky or metallic materials, while Jovian planets are predominantly composed of lighter elements such as hydrogen and helium.
G. Terrestrial planets are less dense than Jovian planets: This option is incorrect. As mentioned earlier, terrestrial planets are denser than Jovian planets, so they have higher average densities.
To summarize, the correct options are C and F. Terrestrial planets are found in the inner solar system, and they are denser than Jovian planets.
Learn more about Terrestrial
https://brainly.com/question/29775422
#SPJ11
A heavy rope of linear mass density 0.0700 kg/m is under a tension of 50.0 N. One end of the rope is fixed and the other end is connected to a light string so that the end is free to move in the transverse direction (the other end of the light string is fixed). A standing wave with three antinodes (including the one at the string/rope interface) is set up on the rope with a frequency of 30.0 Hz, and the maximum displacement from equilibrium of a point on an antinode is 2.5 cm. Find: a) the speed of waves on the rope, b) the length of the rope, c) the expression for the standing wave on the rope. d) When the rope is oscillating at its fundamental frequency, with a maximum displacement at the antinode of 2.5 cm, what are the amplitude and the maximum transverse velocity of a point in the middle of the heavy rope?
a) The speed of waves on the rope is 1.50 m/s.
b) The length of the rope is 0.050 m or 50 cm.
c) The expression for the standing wave on the rope is: y(x, t) = A sin(kx) sin(ωt)
d) The amplitude is 0.0125 m and the maximum transverse velocity is 0.75π m/s for a point in the middle of the heavy rope when oscillating at its fundamental frequency.
a) To find the speed of waves on the rope, we can use the formula v = fλ, where v is the speed of the wave, f is the frequency, and λ is the wavelength.
In this case, the frequency is given as 30.0 Hz, and we need to find the wavelength.
Since the rope has three antinodes, the wavelength will be twice the distance between two adjacent antinodes.
Let's denote the distance between two adjacent antinodes as d.
Since the rope has three antinodes, the total length of the rope between the first and third antinode is 2d.
The length of this portion of the rope is also equal to half a wavelength (λ/2).
Therefore, we have:
2d = λ/2
Simplifying, we find:
d = λ/4
Next, we can calculate the wavelength using the displacement of the antinode.
The maximum displacement is given as 2.5 cm, which is equivalent to 0.025 m.
Since the displacement corresponds to half a wavelength, we have:
λ/2 = 0.025 m
Solving for λ, we find:
λ = 0.050 m
Now we can substitute the values of f and λ into the equation v = fλ to find the speed of waves on the rope:
v = (30.0 Hz)(0.050 m) = 1.50 m/s
Therefore, the speed of waves on the rope is 1.50 m/s.
b) The length of the rope can be calculated by multiplying the wavelength by the number of antinodes (n), excluding the fixed end.
In this case, we have three antinodes (n = 3).
Since the rope between the first and third antinode corresponds to half a wavelength, we can use the formula:
Length = (n - 1)(λ/2) = 2(0.050 m)/2 = 0.050 m
Therefore, the length of the rope is 0.050 m or 50 cm.
c) The expression for the standing wave on the rope can be written as:
y(x, t) = A sin(kx) sin(ωt)
where A is the amplitude, k is the wave number, x is the position along the rope, t is the time, and ω is the angular frequency.
In a standing wave, the displacement varies sinusoidally with position but does not propagate in space.
d) When the rope is oscillating at its fundamental frequency, with a maximum displacement at the antinode of 2.5 cm, the amplitude (A) is equal to half the maximum displacement, which is 1.25 cm or 0.0125 m.
The maximum transverse velocity (v_max) of a point in the middle of the heavy rope can be calculated using the formula v_max = Aω, where ω is the angular frequency.
For the fundamental frequency, ω = 2πf. Substituting the given frequency of 30.0 Hz, we have:
ω = 2π(30.0 Hz) = 60π rad/s
Therefore, the amplitude is 0.0125 m and the maximum transverse velocity is:
v_max = (0.0125 m)(60π rad/s) = 0.75π m/s
So, the amplitude is 0.0125 m and the maximum transverse velocity is 0.75π m/s for a point in the middle of the heavy rope when oscillating at its fundamental frequency.
Learn more about speed here:
https://brainly.com/question/13943409
#SPJ11
Consider two diving boards made of the same material, one long and one short. Which do you think has a larger spring constant? Explain your reasoning. (4.6) M Interpret, in your own words, the meaning of the spring constant k in Hooke's law. (4.6) C Compare the simple harmonic motion of two identical masses oscillating up and down on springs with different spring constants, k. (4.6) KU G Consider two different masses oscillating on springs with the same spring constant. Describe how the simple harmonic motion of the masses will differ. (4.6) . To give an arrow maximum speed, explain why an archer should release it when the bowstring is pulled back as far as possible
1) When two diving boards are made of the same material, the long diving board will have a larger spring constant than the short diving board. The spring constant is proportional to the stiffness of the material that is being stretched or compressed. The long diving board will bend more and require more force to stretch it compared to the short diving board. Hence, the long diving board will have a larger spring constant.
2) Hooke's law states that the force required to stretch or compress a spring is directly proportional to the distance it is stretched or compressed, provided the spring's limit of proportionality has not been exceeded. The spring constant k is a measure of the stiffness of the spring and is given by the equation F = -kx, where F is the force applied, x is the displacement from the equilibrium position, and k is the spring constant.
3) Two identical masses oscillating up and down on springs with different spring constants will have different amplitudes, frequencies, and periods of oscillation. The mass on the stiffer spring will oscillate with a smaller amplitude, a higher frequency, and a shorter period than the mass on the less stiff spring.
4) Two different masses oscillating on springs with the same spring constant will have different amplitudes, frequencies, and periods of oscillation. The mass that is lighter will oscillate with a larger amplitude, a lower frequency, and a longer period than the mass that is heavier.
5) To give an arrow maximum speed, an archer should release it when the bowstring is pulled back as far as possible because this maximizes the potential energy stored in the bowstring. When the bowstring is released, this potential energy is converted into kinetic energy, which propels the arrow forward. Releasing the bowstring when it is pulled back as far as possible ensures that the arrow will have the greatest possible velocity.
Learn more about hookes law, here
https://brainly.com/question/17068281
#SPJ11
Particles with a density of 1500 kg/m3 are to be fluidized with
air at 1.36 atm absolute and 450oC in a vessel with a
diameter of 3 m. A bed weighing 15 tons containing particles of an
average particl
When particles with a density of 1500 kg/m3 are to be fluidized with air at 1.36 atm absolute and 450oC in a vessel with a diameter of 3 m and a bed weighing 15 tons containing particles of an average particle size of 0.05 cm, the bed height must be calculated.
However, for calculating the bed height, more information is required. The question must provide the velocity of air, the angle of repose of the particles, and the pressure drop.To calculate the minimum fluidization velocity, the following formula can be used:Vmf = {[1500 x g x (1 - (1 / e))] / [(1500/1.2) + (1.36 x 10^5) + (1.25 x 10^(-5) x 450)]}^(1/2)Where,Vmf is the minimum fluidization velocity in m/s,g is the acceleration due to gravity in m/s^2, ande is the void fraction of the bed.The angle of repose of the particles is a measure of how much the bed will expand, which is needed to calculate the bed height.The bed height, which is the total height of the bed, can be calculated using the following formula:H = [(V * Q)/ε] + HcWhere,H is the total height of the bed in meters,V is the velocity of air in m/s,Q is the volumetric flow rate of air in m^3/s,ε is the void fraction of the bed, andHc is the height of the distributor in meters.
To know more about microsphere visit:
https://brainly.com/question/30542669
#SPJ11
A coil of conducting wire carries a current i. In a time interval of At = 0.490 s, the current goes from i = 3.20 A to iz = 2.20 A. The average emf induced in the coil is a = 13.0 mv. Assuming the current does not change direction, calculate the coil's inductance (in mH). mH
The average emf induced in a coil is given by the equation: ε = -L(dI/dt) Therefore, the inductance of the coil is: L = 6.37 mH
ε = -L(dI/dt)
where ε is the average emf, L is the inductance, and dI/dt is the rate of change of current.
In this case, the average emf is given as 13.0 mV, which is equivalent to 0.013 V. The change in current (dI) is given by:
dI = i_final - i_initial
= 2.20 A - 3.20 A = -1.00 A
The time interval (Δt) is given as 0.490 s.
Plugging these values into the equation, we have:
0.013 V = -L(-1.00 A / 0.490 s)
Simplifying the equation:
0.013 V = L(1.00 A / 0.490 s)
Now we can solve for L:
L = (0.013 V) / (1.00 A / 0.490 s)
= (0.013 V) * (0.490 s / 1.00 A)
= 0.00637 V·s/A
Since the unit for inductance is henries (H), we need to convert volts·seconds/ampere to henries:
1 H = 1 V·s/A
Therefore, the inductance of the coil is:
L = 0.00637 H
Converting to millihenries (mH):
L = 0.00637 H * 1000
= 6.37 mH
So, the coil's inductance is 6.37 mH.
Learn more about inductance here
https://brainly.com/question/31127300
#SPJ11
In a perfect conductor, electric field is zero everywhere. (a) Show that the magnetic field is constant (B/at = 0) inside the conductor. (5 marks) (b) Show that the current is confined to the surface. (5 marks) (c) If the sphere is held in a uniform magnetic field Bî. Find the induced surface current density
(a) Inside a perfect conductor, the electric field is zero. From Faraday's law, ∇ × E = -∂B/∂t. Since ∇ × E = 0, we have -∂B/∂t = 0, which implies that the magnetic field B is constant inside the conductor.
(b) According to Ampere's law, ∇ × B = μ₀J, where J is the current density. Since B is constant inside the conductor , ∇ × B = 0. Therefore, μ₀J = 0, which implies that the current density J is zero inside the conductor. Hence, the current is confined to the surface.
(c) When a conductor is moved in a uniform magnetic field, an induced current is produced to oppose the change in magnetic flux. The induced surface current density J_induced can be found using
J_induced = σE_induced
Since the sphere is held in a uniform magnetic field Bî, the induced electric field E_induced is given by E_induced = -Bv.
Therefore, the induced surface current density J_induced = -σBv, where σ is the conductivity of the sphere.
Learn more about electric field here:
https://brainly.com/question/28027633
#SPJ11
An insulated beaker with negligible mass contains liquid water with a mass of 0.240 kg and a temperature of 65.8 °C How much ice at a temperature of - 10.2°C must be dropped into the water so that the final temperature of the system will be 33.0 °C ? Take the specific heat of liquid water to be 4190 J/kg. K, the specific heat of ice to be 2100 J/kg · K, and the heat of fusion for water to be 3.34x105 J/kg.
Approximately 37.9 grams of ice at -10.2 °C must be dropped into the water to achieve a final temperature of 33.0 °C.
To solve this problem, we need to consider the energy gained or lost by each component of the system and equate it to zero, as the total energy of the system is conserved.
Let's calculate the energy gained or lost by each component step by step:
1. Heat gained by the water to reach the final temperature of 33.0 °C:
Q1 = mass of water × specific heat of water × change in temperature
= 0.240 kg × 4190 J/kg·K × (33.0 °C - 65.8 °C)
= -3439.68 J (negative sign indicates heat lost)
2. Heat lost by the ice to reach the final temperature of 33.0 °C:
Q2 = mass of ice × specific heat of ice × change in temperature
= mass of ice × 2100 J/kg·K × (33.0 °C - (-10.2 °C))
= mass of ice × 2100 J/kg·K × 43.2 °C
3. Heat lost by the ice to melt into water at 0 °C:
Q3 = mass of ice × heat of fusion of water
= mass of ice × 3.34 x [tex]10^5[/tex] J/kg
Now, we can set up the equation:
Q1 + Q2 + Q3 = 0
Substituting the values we calculated earlier:
-3439.68 J + mass of ice × 2100 J/kg·K × 43.2 °C + mass of ice × 3.34x10^5 J/kg = 0
Simplifying the equation, we can solve for the mass of ice:
mass of ice × (2100 J/kg·K × 43.2 °C + 3.34 x [tex]10^5[/tex] J/kg) = 3439.68 J
mass of ice × (90720 J/kg) = 3439.68 J
mass of ice = 3439.68 J / (90720 J/kg)
Calculating the mass of ice:
mass of ice = 0.0379 kg or 37.9 grams
Therefore, approximately 37.9 grams of ice at -10.2 °C must be dropped into the water to achieve a final temperature of 33.0 °C.
To learn more about energy visit:
brainly.com/question/425036
#SPJ11
The output power of a 400/690 V, 50 Hz, Y-connected induction motor, shown below, is 15 kW. It runs at full load with a speed of 2940 RPM. Choose the correct statement: The motor's synchronous speed is 3000 RPM and its rated power is 30 HP. O The motor's synchronous speed is 2500 RPM at 50 Hz. O The motor has 2 poles and operates at a slip of 6%. o The motor torque at full load is 48.4 Nm O The motor has 4 poles and operates at a slip of 2%.
The correct statement is that the motor has 4 poles and operates at a slip of 2%. and the motor torque at full load is 48.4 Nm
Synchronous speed of induction motor The synchronous speed (N_s) of an induction motor is calculated using the below formula: N_s = (f/P) × 120 where, f is the frequency of the power supply applied P is the number of poles in the motor
From the above formula, we get the synchronous speed of the motor = (50/2) × 120 = 3000 RPM
The motor operates at a slip of 2%.
The speed of the motor is given by, Speed of motor (N) = Synchronous speed – Slip speed where Slip speed = (Slip × Synchronous speed) / 100
Now, Speed of motor (N) = 3000 – (2% × 3000) = 2940 RPM
Therefore, the motor has 4 poles. The rated power of the motor is given as 15 kW, which is equal to 20 HP (1 HP = 0.746 kW).
So, the motor's rated power is 20 HP.
The formula for calculating the motor torque is given by the below formula, T = (P × 60) / (2 × π × N) Where, P = Output power of the motor
N = Speed of the motor
Substituting the values we get, T = (15 × 60) / (2 × π × 2940) = 48.4 Nm
Therefore, the motor torque at full load is 48.4 Nm.
know more about Synchronous speed
https://brainly.com/question/31605298
#SPJ11
The complete question is -
The output power of a 400/690 V, 50 Hz, Y-connected induction motor, shown below, is 15 kW. It runs at full load with a speed of 2940 RPM. Choose the correct statement:
o The motor's synchronous speed is 3000 RPM and its rated power is 30 HP.
O The motor torque at full load is 48.4 Nm O The motor has 4 poles and operates at a slip of 2%.
O The motor has 2 poles and operates at a slip of 6%.
O The motor's synchronous speed is 2500 RPM at 50 Hz.
Which of the following magnetic fluxes is zero? B = 4Tî – 3TÂ and А A= -3m%j + 4m2 B = 4T - 3Tk and A = 3m² – 3m2; O B = 4T - 3TR B 3ТА and A = 3m2 – 3m29 + 4m²k 0 B = 4TÊ – 3T and A = 3m2 + 3mºj - 4m²k
Of the following magnetic fluxes is zero. the magnetic flux is zero for Option D, where B = 4Tî - 3T and A = 3m² + 4m²k.
To determine which of the given magnetic fluxes is zero, we need to calculate the dot product of the magnetic field vector B and the vector A. If the dot product is zero, it means that the magnetic flux is zero.
Let's examine each option:
Option A: B = 4Tî - 3TÂ and A = -3m%j + 4m²k
The dot product of B and A is:
B · A = (4T)(-3m%) + (-3T)(4m²) + (0)(0) = -12Tm% - 12Tm²
Since the dot product is not zero, the magnetic flux is not zero.
Option B: B = 4T - 3Tk and A = 3m² - 3m²
The dot product of B and A is:
B · A = (4T)(3m²) + (0)(-3Tk) + (-3T)(0) = 12Tm² + 0 + 0
Since the dot product is not zero, the magnetic flux is not zero.
Option C: B = 4TÊ - 3T and A = 3m² + 3mºj - 4m²k
The dot product of B and A is:
B · A = (0)(3m²) + (-3T)(3mº) + (4T)(-4m²) = 0 - 9Tmº - 16Tm²
Since the dot product is not zero, the magnetic flux is not zero.
Option D: B = 4Tî - 3T and A = 3m² + 4m²k
The dot product of B and A is:
B · A = (4T)(3m²) + (0)(0) + (-3T)(4m²) = 12Tm² + 0 + (-12Tm²)
The dot product simplifies to zero.
Therefore, in Option D, the magnetic flux is zero.
Learn more about magnetic field here:
https://brainly.com/question/7645789
#SPJ11
Ud = Dust particles, subject to a drag force from the gas, have radial velocity Vg – r12knSt St? +1 where St is the Stokes number. Show that for particles with St > 500Min/(4c), there exist two locations where the dust velocity is zero. Will particles collect in both locations?
Answer:
For particles with St > 500Min/(4c), there exists one location where the dust velocity is zero when St is large. There is no additional location where the dust velocity is zero, even for very large values of St.
The equation provided is:
Ud = Vg – r^(12knSt) + 1
To find the locations where the dust velocity is zero, we can set
Ud = 0 and solve for r:
0 = Vg – r^(12knSt) + 1
This equation represents a drag force acting on the dust particles, where Vg is the gas velocity and St is the Stokes number. We want to determine under what conditions there exist two locations where the dust velocity is zero.
For particles with St > 500Min/(4c), where Min is the minimum particle size and c is the speed of sound, we can consider the following:
If St is large (St ≫ 1):
In this case, the term r^(12knSt) dominates the equation compared to the other terms.
Thus, the equation simplifies to:
r^(12knSt) ≈ Vg
Taking the twelfth root of both sides:
r ≈ (Vg)^(1/(12knSt))
This indicates that there is one location where the dust velocity is zero.
If St is very large (St ≫ 500Min/(4c)):
In this scenario, the term r^(12knSt) becomes negligible compared to the other terms. Thus, the equation can be approximated as:
Vg + 1 ≈ 0
However, this equation has no solution since there is no real value of r that satisfies it. Therefore, there is no additional location where the dust velocity is zero.
To summarize, for particles with St > 500Min/(4c), there exists one location where the dust velocity is zero when St is large.
However, there is no additional location where the dust velocity is zero, even for very large values of St.
Learn more about stokes law, here
https://brainly.com/question/29565708
#SPJ11
Two opposing speakers are shown in Figure 1. A standing wave is produced from two sound waves traveling in opposite directions; each can be described as follows: y 1
=(5 cm)sin(4x−2t),
y 2
=(5 cm)sin(4x+2t).
where x and y, are in centimeters and t is in seconds. Find
The frequency of the standing wave is 216.63 Hz.
The standing wave equation given below can be calculated by adding the two wave functions:
y1 = (5 cm)sin(4x − 2t)y2 = (5 cm)sin(4x + 2t)
Standing wave equation:y = 2(5 cm)sin(4x)cos(2t)
The wavelength of the wave is given by λ=2πk, where k is the wavenumber.Since the function sin(4x) has a wavelength of λ = π/2, k = 4/π.
For any wave, the frequency is given by the formula f = v/λ, where v is the velocity of the wave.
Here, v = 340 m/s (approximate speed of sound in air at room temperature).f = v/λ = 340/(π/2) = (680/π) Hz = 216.63 Hz
Therefore, the frequency of the standing wave is 216.63 Hz.
Know more about frequency here,
https://brainly.com/question/29739263
#SPJ11
Assume the box below has height = width and that the force is applied at the top of the box. Assuming the box does not slide, what minimum force F is needed to make the box rotate? A) The box will rotate for any non-zero force B) F=mg/2 C) F=mg D) F=2mg E) The box will not rotate no matter how large the force In class: Assume the box below has height = width and that the force is applied at the top of the box. If μ S
=0.75, what happens first as the force is gradually increased from F=0 to larger values? A) It slides first B) It rotates first C) It rotates and slides at the same moment D) It never rotates or slides, no matter how large the force In class: Assume the box below has height = width and that the force is applied at the top of the box. If μ S
=0.25, what happens first as the force is gradually increased from F=0 to larger values? A) It slides first B) It rotates first C) It rotates and slides at the same moment D) It never rotates or slides, no matter how large the force Practice : (a) Will the box slide across the floor? (b) Will the box rotate about the lower left corner?
The correct options are (a) the box will slide across the floor, and (b) the box will rotate about the lower left corner.
(a) The box will slide across the floor and (b) the box will rotate about the lower left corner. When the box is pushed at the top with force F, then the force will have two effects. First, the force will rotate the box, and second, the force will make the box slide. The box will rotate when the force F is applied and will slide when the force is large enough, that is, greater than the force of static friction.
The minimum force F needed to make the box rotate is F = mg/2.
Therefore, the correct option is (B) F=mg/2. The box will slide first when μs = 0.75 as it is greater than the force of static friction, which is holding the box in place.
The box will rotate and slide at the same moment when the force is large enough, which is equal to the force of static friction multiplied by the coefficient of static friction.
Therefore, the correct option is (C) It rotates and slides at the same moment.
The box will not slide as the force required to make it slide is greater than the force of static friction, which is holding the box in place. The box will rotate about the lower left corner when the force F is applied to the top of the box.
Therefore, the correct options are (a) the box will slide across the floor, and (b) the box will rotate about the lower left corner.
To know more about static friction
https://brainly.com/question/13680415
#SPJ11
What is the maximum speed at which a car may travel over a humpbacked bridge of radius 15 m without leaving the ground?
The maximum speed at which a car may travel over a humpbacked bridge of radius 15 m without leaving the ground is approximately 12.1 m/s. A humpbacked bridge of radius 15 meters is modeled by a circle.
The car will leave the ground if the normal force exerted by the road on the car becomes zero. At that point, the gravitational force acting on the car will be the only force acting on the car. This means that the car will be in free fall. So, the maximum speed of the car without leaving the ground can be calculated using the formula:
vmax = √rg
where vmax is the maximum speed, r is the radius of the circle, and g is the acceleration due to gravity. We are given r = 15 m. g = 9.81 m/s², since the bridge is on the surface of the Earth.
vmax = √(rg) = √(15*9.81) = √147.15 ≈ 12.1 m/s
To learn more about speed, refer:-
https://brainly.com/question/28224010
#SPJ11