A 4.51 kg object is placed upon an inclined plane which has an incline angle of 23.0*. The object slides down the inclined plane with a constant speed. Find the normal force, friction force and the coefficient of sliding friction

Answer:

Explanation:

The corona is in the outer layer of the Sun's atmosphere—far from its surface. Yet the corona is hundreds of times hotter than the Sun's surface. ... In the corona, the heat bombs explode and release their energy as heat. But astronomers think that this is only one of many ways in which the corona is heated.

The chromosphere ("sphere of color") is the second of the three main layers in the Sun's atmosphere and is roughly 3,000 to 5,000 kilometers deep. Its rosy red color is only apparent during eclipses. The chromosphere sits just above the photosphere and below the solar transition region.

The photosphere is the visible "surface" of the Sun. The Sun is a giant ball of plasma (electrified gas), so it doesn't have a distinct, solid surface like Earth. ... The photosphere is much cooler than the Sun's core, which has a temperature well above 10 million degree

And thats all i know

Answer:

N = 63.6

Explanation:

The emf induced in AC generator is given as follows:

[tex]V = N\omega AB Sin\theta[/tex]

for maximum output, [tex]Sin\theta = 1[/tex]

[tex]V = N(2\pi f) AB[/tex]

where,

V = Maximum Output Voltage = 12 V

N = No. of Turns = ?

f = frequency = 60 Hz

A = Area of Coil = 100 cm² = 0.01 m²

B = Strength of Magnetic Field = 0.05 T

Therefore,

[tex]12\ V = N(2)(\pi)(60\ Hz)(0.01\ m^2)(0.05\ T)\\\\N = \frac{12\ V}{(2)(\pi)(60\ Hz)(0.01\ m^2)(0.05\ T)}[/tex]

N = 63.6

Acceleration = (change in speed) / (time for the change)

Change in speed = (10,000 m/s) - (5,000 m/s)

Change in speed = 5,000 m/s

Time for the change = 1 minute

Time for the change = 60 sec

Acceleration = (5,000 m/s) / (60 s)

Acceleration =  83-1/3 m/s²

Answer:

[tex]\huge\boxed{\mathfrak{\underline{Answer...}}} \\ \\ \huge\mathfrak\red{grease} \\ \\ \huge\mathfrak\purple{hope \: it \: helps}[/tex]

Springs are elastic devices used to absorb shock, store energy, and provide support in a variety of applications.

1- The distance the spring is stretched from its equilibrium position is x = 180 - 100 = 80 mm. This can be converted to meters by dividing by 1000, so x = 0.08 m.

2- The restoring force of the spring can be calculated using Hooke's law, which states that F = kx, where F is the restoring force, k is the spring constant, and x is the distance the spring is stretched from its equilibrium position. In this case, F = 50 N/m × 0.08 m = 4 N.

What is Hooke's law?

Hooke's law is a basic law of physics that states that the force applied to a spring is proportional to the amount of displacement (or stretching) of the spring. In other words, the more you stretch a spring, the more force is needed to keep it stretched. This law is expressed mathematically as F = -kx, where F is the force, k is a constant known as the spring constant, and x is the displacement.

To know more about Hooke's law,

https://brainly.com/question/17068281

#SPJ1

Answer:

Efficiency = 77%

Explanation:

Input energy = 570 J

Output energy = 440 J

To find the efficiency;

[tex] Efficiency = \frac {Out-put \; energy}{In-put \; energy} * 100 [/tex]

Substituting into the equation, we have;

[tex] Efficiency = \frac {440}{570} * 100 [/tex]

[tex] Efficiency = 0.7719 * 100 [/tex]

Efficiency = 77.19 ≈ 77%

Therefore, the efficiency of the engine is 77 percent.

The force of gravity is 103.73N and the parallel component of gravity is 40.45N along with the perpendicular component is 95.43N.

The gravitational force, which pulls mass-containing objects in the same direction, is the force of gravity. The force of gravity from Earth is something we consider frequently. Your body is held firmly in place by this force. However, every mass-bearing object pulls everything else with mass toward it through gravity.

The force of gravity F = ma

F = 4.51×23

F = 103.73N

F parallel component = F sinθ

F parallel = 103.73 sin 23°

F parallel = 103.73 × 0.390

F parallel = 40.45N

F perpendicular component =  F cosθ

F perpendicular = 103.73 × cos 23°

F perpendicular = 103.73 × 0.920

F perpendicular = 95.43N.

To know more about force visit:

https://brainly.com/question/19671650

#SPJ1

The distance traveled by the horse pulling the wagon with a force of 1450N is 115.57 metres.

Power is defined as the amount of energy used or transferred in a certain amount of time. This means that power can be calculated by dividing the work done by the time taken.

P = W/t

When a force is applied to move an object, work is done on the object. Work done = force × distance

Power = (Force × distance)/time

According to this question, a horse pulls a wagon with a force of 1450 Newtons.

798 = 1450 × d/210

167,580 = 1450d

Distance = 167,580 ÷ 1450

Distance = 115.57 metres

Therefore, 115.57 metres is the distance traveled by the wagon.

Learn more about power at: https://brainly.com/question/3854047

#SPJ1

Answer:

Elasticity is involved whenever atoms vibrate, so yes it is an example of movement of a sound wave.

The sound wave travels more rapidly through the steel of the track than through the air, because the elastic modulus of steel is a million times greater than the bulk modulus of air.

The third force must be 3.0 newtons due north in order for equilibrium to exist in the system.

To know more about equilibrium, check out :

https://brainly.com/question/18849238

#SPJ1

Answer:

Explanation:

The amplitude looks like about 0.5

period = 2/3

Answer:

[tex]weight = mg \\ = 70 \times 10 \\ = 700 \: newtons[/tex]

[tex]force = 700 \: newtons[/tex]

[tex]force = mass \times acceleration \\ 700 = 70 \times a \\ a = 10 \: {ms}^{ - 2} [/tex]

You can answer this question using the equation PV = nkT, with the Boltzmann constant. This equation should come to mind since they listed every variable in the equation except for n, which is used to calculate the number of molecules!

Also note that temperature should be in Kelvin, so we should do a quick conversion!
K = 273 + C

K = 273 + 22

K = 295

Now we can plug and chug!

[tex]PV=nRT\\(1.0*10^5)(0.36)=n(1.38 * 10^{-23})(295)\\n=\frac{(1.0*10^5)(0.36)}{(1.38 * 10^{-23})(295)}\\n=8.84*10^{24}[/tex]

Therefore, there are 8.84E24 molecules of air in the refrigerator!

The number of molecules of air in the refrigerator is 14.67.

Given:

P = 1.0 x 10⁵ Pa

V = 0.36 m³

R = 8.314 J/(mol·K)

T = 295.15 K

To calculate the number of molecules of air in the refrigerator, the ideal gas law can be used, which states: PV = nRT

where:

P = pressure of the gas

V = volume of the gas

n = number of moles of gas

R = ideal gas constant

T = temperature of the gas

First, let's convert the temperature from Celsius to Kelvin:

T = 22°C + 273.15 = 295.15 K

Now, rearrange the ideal gas law equation to solve for the number of moles (n) of gas:

n = PV / RT

Substituting in the values:

[tex]n = \frac{1.0 \times 10^5 \times 0.36}{8.314 \times 295.15}\\[/tex]

n = 0.0001467 × 10⁵

n = 14.67

Learn more about molecules, here:

https://brainly.com/question/10165305

#SPJ2

Answer:

 I₄ / Io = 0.388 = 38.8%

Explanation:

For this exercise we will analyze the effect of having two depolarizers with an annulus between them, this is described by Malus's law

         I = Io cos² θ

where tea is the angle between the two polarizers.

For this case we must apply this law to each pair of polarizers.

The light that reaches the first polarizer is non-polarized light, therefore only the light that has polarization is transmitted in the direction of the depolarizer, which is horizontal.

          I₁ = I₀ / 2

this intnesidad reaches the second polarizer that has an angle of 23º with respect to the first polarizer

          I₂ = I₁ cos² 23

          I₂ = I₀ / 2 0.847

This light reaches the third polarizer, which has an angle of 42º with respect to the first polarized one.

Let's find the angle with respect to the 2nd polarizer

          θ = 42- 23

          θ = 19º

we apply the law of Malus

          I₃ = I₂2 cos 19

          I₃ = I₀ 0.847 / 2 0.9455

          I₃ = Io 0.4

This intensity of light reaches the fourth polarizer, with an angle of 14º with respect to the 3polarizer

          I₄ = Io 0.4 cos 14

          I₄ = Io 0.4 0.970

          I₄ = Io 0.388

to give this result as a percentage

          I₄ / Io = 0.388 = 38.8%

True. The majority of space lawyers concur that the line dividing airspace from outer space is located halfway between the altitude at which airplanes fly and the orbital altitude of satellites.

They serve a variety of functions, including that of the Satellite Navigation System, amateur radio, television transmission, and weather forecasting. In order to conduct study and acquire data, they also employ telescopes to view outward somewhere at solar system.

Over 99% of Americans have access to satellite internet, along with most other (but certainly not all) rural residents. You do not need to have a home internet connection because the broadband signal is transmitted from satellites.

To know more about satellites visit:

https://brainly.com/question/2522613

#SPJ1

Answer: I don’t know someone tell me

Explanation: ^

Important Formulas:
[tex]w=Fd[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

__________________________________________________________

Given:

[tex]m=42kg[/tex]

[tex]F=180N[/tex]

[tex]w=2500J[/tex]

[tex]d=?[/tex]

__________________________________________________________

Rearranging work formula to make distance the subject:

[tex]w=Fd[/tex]

[tex]\dfrac{w}{F} =\dfrac{Fd}{F}[/tex]

[tex]d=\dfrac{w}{F}[/tex]

__________________________________________________________

Finding distance:

[tex]d=\dfrac{w}{F}[/tex]

[tex]d=\dfrac{2500}{180}[/tex]

__________________________________________________________

[tex]\fbox{d = 13.89 meters}[/tex]

To solve this we must be knowing each and every concept related to velocity. Therefore, the amplitude and maximum velocity are 0.23 m and 2.75 m/s respectively.

V is the velocity measurement of an object's rate of motion and direction of motion. As a result, in order to calculate velocity using this definition, we must be familiar with both magnitude and direction.

For example, if an item travels west with 5 meters a second (m/s), its velocity to the west will be 5 m/s. The most frequent and simplest approach to determine velocity is using the formula shown below.

v = √(k / m) ×A

v = velocity of the mass

k= spring constant

m =mass of the object

A= amplitude of the oscillation.

substituting all the given values in the above equation, we get

2.3 m/s = √(200 N/m / 3.00 kg)×A

A = 2.3 m/s / √(200 N/m / 3.00 kg)

    = 0.23 m

v =√(200 N/m / 3.00 kg) ×0.23 m

 = 2.75 m/s

Therefore, the amplitude and maximum velocity are 0.23 m and 2.75 m/s respectively.

To learn more about velocity, here:

https://brainly.com/question/13372043

#SPJ1

C (11.7)

Explanation:

cos 33 ÷ 14 = 11.7

a. When a football is kicked and it moves from one location to another, it indicates that unbalanced troops are responding to it and b. If an object A applies a force to another object B, then the other object B.

The equilibrium of the forces is disturbed when an object's motion changes. Forces with opposite directions and equal sizes are said to be balanced forces. Motion remains constant when the forces are equal. In one of your scenarios from the previous section, you used the same amount of force on an object but pushed or pulled it in the opposite direction.

To know more about Newton's third law visit:

brainly.com/question/29768600

#SPJ1

Yes! The second one is one of the constant acceleration equations. We know that our X and Y values are independent of each other, which is why Y doesn't matter here. We only care about the X position value since X and Y are independent! (This is an extremely important rule, trust me)

Therefore, we don't need to calculate a Y velocity or anything like that. We only need Y because we need to find time t. We can use Y to calculate time because although X and Y are independent of each other, they do share the same time traveled!

We know that [tex]V_{0,y}[/tex] = 0, since the car wasn't moving vertically initially. We also know Y initial is 100 and Y final is 0 when it hits the ground! The last thing we know is that the acceleration of any item in free fall is (usually) -9.81. Therefore, using the original Y equation that your teacher gave, we can plug things in and solve for time!

[tex]y_f=y_i+v_it+\frac{1}{2}at^2\\0=100+(0)t+\frac{1}{2}(-9.81)t^2\\-100=-4.905t^2\\t^2=20.39\\t=4.52[/tex]t = 4.52s

(Your teacher simplified the Y equation a little, so it may look slightly different from mine. I started at the original Y equation)

Now we have time! So now we can use the other equation your teacher provided. Again, remember, even though the car is now traveling through the air vertically, that does not affect its x velocity! The car is still traveling at 50m/s!

Therefore, we can just plug and chug!:

x = vt

x = (50)(4.52)

x = 226m

I hope this helps!

Answer:

B. The particles can move past each other within a fixed volume.

D. There are intermolecular forces between the atoms or molecules.

Explanation:

Answer:

CM of a system ( 0.5l , 0.25l )

Explanation:

x = (m1.x1 +m2.x2 +m3.x3) / ( m1 + m2 +m3)

x = ( m x 0 + m x 0 + 2m x l ) / ( m+m+2m)

x = 2m x l / 4m

x = 0.5 l

y = (m1 x y1 +m2 x y2 +m3 x y3) / ( m1 + m2 +m3)

y = (m x 0) + m x l + 2m x 0 ) / ( m + m + 2m )

y = m x l / 4m

y = 0.25 l

The interaction between the Corn plants and milkweed plants demonstrates as competition.

Competition is typically considered to refer to the detrimental consequences that neighbors' presence has on a plant's fitness or growth, typically through lowering the resources available.

In addition to resources, disturbance, herbivory, and mutualisms, competition can be a significant factor in controlling plant populations. The resource involved is depending on the species and the region, as all plants require a few fundamental ingredients.

As corn plants and milkweed plants grow in the same area, the interaction between the Corn plants and  milkweed plants demonstrates competition.

Learn more about competition  here:

https://brainly.com/question/9563763

#SPJ1

The things would which would be needed to survive the mesosphere include the following below:

This is refereed to as the third layer of the atmosphere which is present above the stratosphere and directly below the thermosphere.

It has a low density of gas and water vapor present in the area which is why it is no place for human life as there is a shortage of oxygen and other gases needed for some biochemical reactions in the ecosystem. This is therefore the reason why things such as food, water and oxygen supply is neeeded tio survive in the mesosphere.

Read more about Mesosphere here https://brainly.com/question/20542996

#SPJ1

Optimal Arousal theory focuses on finding the right level of stimulation.

William James (1842–1910), frequently referred to as the father of psychology in the United States, made significant contributions to early studies on motivation.

James proposed a number of instincts that help with survival as the driving forces behind conduct . An instinct is a species-specific pattern of behavior that is not taught, according to biology.

But there was a lot of disagreement over what exactly constitutes instinct among James's contemporaries. James postulated a number of unique human instincts, although many of his contemporaries had different lists.

Therefore, Optimal Arousal theory  focuses on finding the right level of stimulation.

To learn more about arousal theory, refer to the link:

brainly.com/question/29741835

#SPJ1

Answer:

The Earth will keep moving unless acted up on by a force

Explanation:

Not A because that's not the law of inertia

It's B because that is pretty much the definition of the law of inertia

Not C because Earth will not stop moving on it's own

Again, not the definition of the law of inertia

Answer:

B

Explanation:

Answer:

His average speed.

Explanation:

Average speed = Total distance travelled / total time .

In the given case odometer measures total distance travelled . Dividing it by time will give average speed .

Average velocity can not be the answer as it is measured by dividing displacement by time . Displacement here is zero because initial and final point are same . Instantaneous velocity is given by the speedometer . It keeps on changing all the time . It is actually speed at a particular point of time . It can not be average velocity or speed .

Answer:

12hp and 132 ml

Explanation:

12+ 132.00=12asd