Answer:
[tex]1.2\; {\rm N}[/tex], assuming that all other forces on this crab were balanced.
Explanation:
The impulse [tex]J[/tex] on an object is equal to the change in momentum [tex]\Delta p[/tex]. In other words:
[tex]J = \Delta p[/tex].
If the mass [tex]m[/tex] of the object stays the same (as in the case of this question), the change in momentum can be rewritten as:
[tex]J = \Delta p = m\, \Delta v[/tex], where [tex]\Delta v[/tex] is the change in velocity.
Impulse is also equal to the net force on the object [tex]F_{\text{net}}[/tex] times the duration [tex]\Delta t[/tex] over which the force is applied:
[tex]J = F_{\text{net}}\, \Delta t[/tex].
Equate the two expressions for [tex]J[/tex] to obtain:
[tex]F_{\text{net}}\, \Delta t = m\, \Delta v[/tex].
In this question:
[tex]\Delta t = 5\; {\rm s}[/tex] is the duration over which the force was applied,[tex]m = 3\; {\rm kg}[/tex] is the mass of the crab, and[tex]\Delta v = (3 - 1)\; {\rm m\cdot s^{-1}} = 2\; {\rm m\cdot s^{-1}}[/tex] is the change in the velocity of the crab.Rearrange [tex]F_{\text{net}}\, \Delta t = m\, \Delta v[/tex] and solve for the net force [tex]F_{\text{net}}[/tex]:
[tex]\begin{aligned}F_{\text{net}} &= \frac{m\, \Delta v}{\Delta t} \\ &= \frac{(3\; {\rm kg})\, (2\; {\rm m\cdot s^{-1}})}{5\; {\rm s}} \\ &= 1.2\; {\rm kg \cdot m\cdot s^{-2}} \\ &= 1.2\; {\rm N}\end{aligned}[/tex].
Assuming that all other forces on this crab are balanced, the net force on the crab would be equal to the force from the tide. Hence, the tide would have pushed the crab with a force of [tex]1.2\; {\rm N}[/tex].
Which unit abbreviation is a measurement of force?
A. m/s
B. m/s²
C. N
D. N/s
The unit abbreviation that represents a measurement of force is C. N, which stands for Newton.
What is newton unit?ewton is the force unit derived from the International System of Units (SI). It is named after Sir Isaac Newton, widely acknowledged as one of the most influential scientists of all time. The force required to accelerate a mass of one kilogram at a rate of one meter per second squared (m/s2) is referred to as one Newton.
Choice A, m/s, addresses an estimation of speed or speed (meters each second), while
choice B, m/s², addresses an estimation of speed increase (meters each second squared), which is connected with force, however not the unit of power itself.
Choice D, N/s, addresses an estimation of the pace of progress of power after some time, which is certainly not a generally involved unit in physical science.
know more about force visit :
https://brainly.com/question/13191643
#SPJ1
If the block of wood is originally prior to the collision is at rest at the edge of a frictionless table of height 1.00 m, how far away Ihorizontally away from the table's edge does the wood-and-bullet combination land?
The wood-and-bullet combination lands approximately 19.8 m horizontally away from the table's edge. To solve this problem, we need to use the conservation of energy principle.
At the edge of the table, the block of wood has only potential energy, and after the collision, the combined system of the bullet and the block has both kinetic and potential energy. However, since the collision is assumed to be elastic, the total energy of the system is conserved.
Let m be the mass of the block of wood and v be the velocity of the bullet just before the collision. Let V be the velocity of the combined system of the bullet and the block just after the collision, and let x be the horizontal distance from the table's edge to the point where the combined system lands.
The potential energy of the block of wood just before the collision is mgh, where g is the acceleration due to gravity and h is the height of the table. Since the table is assumed to be frictionless, there is no loss of energy due to friction.
At the moment of collision, the bullet and the block combine into a single system with mass m + M, where M is the mass of the bullet. Since the collision is assumed to be elastic, the kinetic energy just before and just after the collision is the same.
The kinetic energy just before the collision is (1/2)Mv^2, and the kinetic energy just after the collision is (1/2)(m + M)V^2.
Therefore, we have: [tex](1/2)Mv^2 = (1/2)(m + M)V^2 + mgh[/tex]
Solving for V, we get: V = sqrt[(Mv^2 + 2mgh)/(m + M)]
Since the horizontal motion of the combined system is not affected by the vertical motion, the horizontal component of the velocity V is equal to the horizontal component of the velocity just before the collision, which is v.
Therefore, we have: Vx = v
Since the time of flight t of the combined system is the same as the time it takes for the block of wood to fall from the table to the ground, we have: t = sqrt(2h/g)
Therefore, we can find the horizontal distance x using the equation:
x = Vx * t
Substituting Vx = v and t = sqrt(2h/g), we get: x = v * sqrt(2h/g)
Substituting the given values, we get:
[tex]x = sqrt(2 * 1.00 m * 9.81 m/s^2) * 240 m/s[/tex]
x ≈ 19.8 m
Therefore, the wood-and-bullet combination lands approximately 19.8 m horizontally away from the table's edge.
To learn more about conservation of energy principle here:
https://brainly.com/question/16881881
#SPJ11
the conductor coming from the ground / neutral bar in the sep and is connected to the grounding rod driven into the earth is called what
The conductor that you are referring to, which comes from the ground or neutral bar in the service entrance panel (SEP) and connects to the grounding rod driven into the earth, is called the "grounding electrode conductor" (GEC).
Here is a step-by-step explanation of the process:
1. Locate the service entrance panel (SEP), where electricity enters your building from the utility company. This panel contains a ground or neutral bar, which serves as the central grounding point for the electrical system.
2. Identify the grounding electrode conductor (GEC) connected to the ground or neutral bar in the SEP. This conductor is typically a thick, copper or aluminum wire designed to carry fault currents safely to the earth.
3. Follow the GEC from the SEP to the grounding rod, which is a metal rod driven into the earth near your building. The grounding rod provides a direct connection to the earth, ensuring that any electrical faults are safely dispersed.
4. Understand that the GEC serves a crucial role in maintaining electrical safety in your building by providing a path for fault currents to be safely discharged into the earth, preventing damage to electrical equipment and reducing the risk of electrical shock.
To Learn More About Conductor
https://brainly.com/question/30759857
#SPJ11
if three unequal capacitors, initially uncharged, are connected in series across a battery, which of the fol- lowing statements is true? (a) the equivalent capaci- tance is greater than any of the individual capacitances. (b) the largest voltage appears across the capacitor with the smallest capacitance. (c) the largest voltage appears across the capacitor with the largest capaci- tance. (d) the capacitor with the largest capacitance has the greatest charge. (e) the capacitor with the smallest capacitance has the smallest charge.
The correct statements are the largest voltage appears across the capacitor with the smallest capacitance and the capacitor with the smallest capacitance has the smallest charge. Here options B and E are the correct answer.
When three unequal capacitors are connected in series across a battery, the charge on each capacitor is the same because they are connected in series. The equivalent capacitance of the circuit is less than any of the individual capacitances because capacitors in series add inversely.
The voltage across each capacitor depends on its capacitance, as well as the equivalent capacitance of the circuit and the applied voltage of the battery. The voltage across each capacitor can be calculated by the formula V = Q/C, where V is the voltage, Q is the charge, and C is the capacitance.
Since the capacitors are connected in series, the voltage across each capacitor is proportional to its capacitance. Therefore, the largest voltage appears across the capacitor with the smallest capacitance, and the smallest voltage appears across the capacitor with the largest capacitance.
The charge on each capacitor is directly proportional to its capacitance, and inversely proportional to the voltage across it. Therefore, the capacitor with the smallest capacitance has the smallest charge, and the capacitor with the largest capacitance has the largest charge.
To learn more about capacitors
https://brainly.com/question/17176550
#SPJ4
(refer to code example 8-1) if none of the h2 elements that use this event handler include a class attribute when the application starts, what happens the first time the user clicks on an h2 element?
a. A class named "minus" is added to the element and the element's next sibling is displayed. b. A class named "minus" is added to the element and the element's next sibling is hidden. c. Nothing happens because the click) event method is used instead of the on event method. d. Nothing happens because the event object isn't passed to the function for the event handler.
d. Nothing happens because the event object isn't passed to the function for the event handler.
Assuming the code example 8-1 you are referring to is a JavaScript code example that adds an event listener to all h2 elements in the document, the answer to your question would be: Nothing happens because the event object isn't passed to the function for the event handler.
In the code example, the event object is not passed as a parameter to the function that handles the click event, so the function cannot access the event object's properties and methods.
Without the event object, the function cannot determine which h2 element was clicked or perform any actions in response to the click event. Therefore, the function will not add the "minus" class to the clicked element or hide/show its next sibling.
To learn more about JavaScript here:
https://brainly.com/question/28448181
#SPJ11
what sign for δs do you expect when the pressure on 0.860 mol of an ideal gas at 350 k is increased isothermally from an initial pressure of 0.760 atm ?
The answer is that we expect a positive sign for δs when the pressure on 0.860 mol of an ideal gas at 350 k is increased isothermally from an initial pressure of 0.760 atm
Assuming the process is reversible, the change in entropy can be calculated using the equation:
ΔS = nR ln(P₂/P₁)
where ΔS is the change in entropy, n is the number of moles of gas, R is the gas constant, P₁ is the initial pressure, and P₂ is the final pressure.
Substituting the given values, we get:
ΔS = (0.860 mol)(8.314 J/(mol*K)) ln(0.860 atm / 0.760 atm)
ΔS ≈ 0.109 J/K
Since the temperature is constant (isothermal process), the sign of ΔS is positive. Therefore, the answer is that we expect a positive sign for δs.
To learn more about isothermally here:
https://brainly.com/question/30036683
#SPJ11
A person stands 7.00 m from a speaker, and 9.00 m from an identical speaker. What is the frequency of the second (n=2) interference maximum (constructive)?
Therefore, the frequency of the second (n=2) interference maximum is 343 Hz.
How is wave interference calculated?yR(x,t)=2Acos(ϕ2)sin(kx−ωt+ϕ2). The resulting wave has the same wave number and angular frequency as the original wave, as well as an amplitude of AR = [2A cos(2)] and a phase shift that is half that of the original wave.
For the nth constructive interference, the path difference between the two speakers is provided by:
Δx = d sin θ = nλ
The angle is 0 degrees and the path difference is: because the two speakers are identical and the individual is equally distant from them.
Δx = 9.00 m - 7.00 m = 2.00 m
The wavelength corresponding to the second maximum (n=2) is given by:
nλ = Δx
λ = Δx / n = 2.00 m / 2 = 1.00 m
The frequency of the sound wave is related to its wavelength by the formula:
v = f λ
where v is the speed of sound in air, which is approximately 343 m/s at room temperature.
Solving for the frequency, we get:
f = v / λ = 343 m/s / 1.00 m = 343 Hz
To know more about frequency visit:-
https://brainly.com/question/22548127
#SPJ1
how do i get my backseat up in my mercedes suv all the way it goes up but it's it's it won't go all the way back up once we pull it down
To get the backseat up in a Mercedes SUV all the way, you should try pushing it forward first, and then lifting it up from the rear. If the seat will not go all the way back up once it has been pulled down, there may be an issue with the locking mechanism or the seat belt that needs to be addressed.
Check for any obstructions: Make sure there are no objects or debris obstructing the movement of the seat. Remove any items that may be blocking the seat from moving up.
Inspect the seat tracks: Check the seat tracks for any signs of damage or wear and tear. If there are any issues, you may need to have the tracks repaired or replaced.
Check the power source: If your SUV has a power-operated backseat, make sure the battery is fully charged and that the power supply is functioning properly. Check the fuses and wiring to ensure there are no issues.
Consult the owner's manual: The owner's manual may have specific instructions for how to operate the backseat of your Mercedes SUV. Refer to the manual for guidance on troubleshooting and resolving any issues.
For more such questions on Mercedes, click on:
https://brainly.com/question/29297705
#SPJ11
an aerodynamicist wants to model the fluid as seen by a stationary observer. what view best represents the model used by the aerodynamicist? question 12 options: a) lagrangian b) eulerian c) lagrangian and eulerian d) arbitrary lagrangian-eulerian
An aerodynamicist wants to model the fluid as seen by a stationary observer presents the Eulerian view.
The Eulerian model is used to describe the motion of fluids, and it is based on a fixed point of observation. Eulerian viewpoint is the most frequently used fluid-dynamic perspective in the study of fluid motion. It is used to calculate the fluid's physical properties, including pressure, density, and temperature, as well as the motion of fluids in space and time.
In an Eulerian framework, fluid motion is observed from a fixed point, with the fluid and observer being two separate entities.
Hence, an aerodynamicist wants to model the fluid as seen by a stationary observer presents the Eulerian view.
To know more about Eulerian model, refer here:
https://brainly.com/question/28357993#
#SPJ11
a flywheel is initially rotating at 20 rad/s and has a constant angular acceleration. after 9.0 s it has rotated through 450 rad. its angular acceleration is:
The angular acceleration of the flywheel is approximately 6.67 rad/s².
To determine the angular acceleration, we can use the following kinematic equation:
θ = ω₀t + (1/2)αt²
Here, θ is the angular displacement (450 rad), ω₀ is the initial angular velocity (20 rad/s), t is the time (9.0 s), and α is the angular acceleration we want to find.
1. Plug in the given values into the equation:
450 rad = (20 rad/s)(9.0 s) + (1/2)α(9.0 s)²
2. Simplify the equation:
450 rad = 180 rad + (1/2)α(81 s²)
3. Subtract 180 rad from both sides:
270 rad = (1/2)α(81 s²)
4. Multiply both sides by 2 to eliminate the fraction:
540 rad = α(81 s²)
5. Divide both sides by 81 s² to solve for α:
α = 540 rad / 81 s²
6. Calculate α:
α ≈ 6.67 rad/s²
The angular acceleration of the flywheel is approximately 6.67 rad/s².
For more such questions on angular acceleration , Visit:
https://brainly.com/question/21278452
#SPJ11
Over the years, land used for grain production in this village has been subjected to aggressive farming practices such as over-watering and plowing. How have these activities most likely affected the land?
Over-watering and plowing can have several negative effects on the land used for grain production. Over-watering can lead to waterlogging and salinization, which can reduce the fertility of the soil and harm crops. It can also lead to soil erosion and the depletion of nutrients in the soil.
The soil's capacity to absorb water and air can be reduced by soil compaction, which can result from overwatering and waterlogging. Both soil erosion and the demise of helpful microbes in the soil might result from this. Moreover, excessive irrigation can cause nutrient leaching, which removes vital nutrients from the soil.
Contrarily, ploughing can result in soil erosion and compaction, which can have a detrimental impact on crop yields. Plowing can also weaken the soil's structure, which lowers the soil's capacity to retain water and raises the likelihood of soil erosion. Plowing can also destroy beneficial soil microbes, which lowers soil fertility and harms the soil's overall health.
Learn more about plowing here:
https://brainly.com/question/7570264
#SPJ1
if the system absorbs 196 j of heat, and the surroundings do 117 j of work on the system, what is the change in internal energy of the system ? group of answer choices 79 j - 79 j -229 j 313 j
The change in internal energy of the system is 79 J. The answer is option a.
Internal energy is the total energy that a system possesses as a result of the random motion and interactions of its constituent particles, such as atoms and molecules. The change in internal energy of the system is given by the first law of thermodynamics as,
ΔU = Q - W
where ΔU is the change in internal energy, Q is the heat absorbed by the system, and W is the work done on the system by the surroundings.
Substituting the given values, we get:
ΔU = 196 J - 117 J
ΔU = 79 J
Option a is correct.
To know more about internal energy, here
brainly.com/question/2795732
#SPJ4
the bird perched on the swing in the figure has a mass of 49 g, and the base of the swing has a mass of 142.1 g. assume that the swing and the bird are originally at rest and that the bird then takes off horizontally at 2.27 m/s. the acceleration of gravity is 9.8 m/s 2 . if the base can swing freely (without friction) around the pivot, how high will the base of the swing rise above its original level? answer in units of m.
The base of the swing will rise above its original level by a height of 0.2522 m m.
As the bird perched on the swing in the figure has a mass of 49 g, and the base of the swing has a mass of 142.1 g. Assume that the swing and the bird are originally at rest and that the bird then takes off horizontally at 2.27 m/s. The acceleration of gravity is 9.8 m/s².
Answer in units of m. The base of the swing will rise above its original level by 1.047 m, provided the bird perched on the swing has a mass of 49 g, and the base of the swing has a mass of 142.1 g. The method to find out the result is as follows: We will use the principle of conservation of energy to solve this problem.
We can conclude that the total mechanical energy of the system is conserved since the system consists of the swing and the bird. In other words, at the initial and final states, the sum of kinetic energy and potential energy remains the same.
Thus,
Ki + Ui = Kf + Uf
where Ki and Ui represent the initial kinetic and potential energy and Kf and Uf represent the final kinetic and potential energy.
Ki = 0 since the bird and the swing are at rest initially.'
Kf = 1/2 m(v²)
where m is the total mass of the system and v is the horizontal velocity of the bird.
Kf = 1/2 (0.1421+0.049) (2.27)²
=> 0.477 JUi
= mgh
where h is the maximum height attained by the base of the swing and g is the acceleration due to gravity. Since the bird is taking off horizontally, we know that its motion does not affect the height of the swing, so we can assume that the bird is absent.
Uf = mgh
where m is the total mass of the system and g is the acceleration due to gravity.
Since the swing and the bird are at the same height when the bird takes off,
Ui = 0.If
= 0.1421(9.8)h + 0.049(9.8)h
= 0.137hSolve for h,
we get;
h = 3.455/0.137
h = 25.22 cm
h = 0.2522 m
To learn more about Height :
https://brainly.com/question/28308143
#SPJ11
a wire carrying a 29.0 a current passes between the poles of a strong magnet. the wire is perpendicular to the magnetic field of the magnet and experiences a 2.15 n force on its 2.00 cm length in the field. what is the average field strength of the magnet (in t)?
A strong magnet's poles are crossed by a cable conducting a 29.0 a current. The wire feels a 2.15 n pull on its 2.00-centimeter length in the field while it is perpendicular to the magnet's magnetic field. The average field strength of the magnet is 3.71 T.
The force on a wire of length L carrying a current I in a magnetic field B is given by the formula F = BIL sinθ, where θ is the angle between the wire and the magnetic field. Since the wire is perpendicular to the field, sinθ = 1, and we can simplify this equation to F = BIL.
We are given the current I, the length L = 2.00 cm, and the force F = 2.15 N. Plugging these values into the equation, we get:
2.15 N = B × 29.0 A × 0.02 m
Solving for B, we get:
B = 2.15 N / (29.0 A × 0.02 m)
= 3.71 T
To learn more about magnetic fields
https://brainly.com/question/11514007
#SPJ4
Water is flowing through a pipe of two circular cross sectional areas A1 and A2 laid horizontally as shown below. The pressure difference between those two cross sectional areas is 104 Pascal. If the velocity of the water through cross section A2 is 6 m/s, what would be the velocity of the water through cross section A1? Assume acceleration due to gravity (g) =10 ms-2
The velocity of the water through cross section [tex]A_1[/tex] is approximately 2.26 m/s.
According to the principle of continuity, the mass flow rate of water through the pipe must remain constant. This means that the product of the cross-sectional area and velocity of the water must be constant along the pipe. Mathematically, we can express this as:
[tex]A_1v_1 = A_2v_2[/tex]
where [tex]A_1[/tex] and [tex]A_2[/tex] are the cross-sectional areas of the pipe at sections 1 and 2, respectively, and [tex]v_1[/tex] and [tex]v_2[/tex] are the velocities of the water at sections 1 and 2, respectively.
We also know that the pressure difference between sections 1 and 2 is 104 Pa. Using Bernoulli's equation, we can relate this pressure difference to the velocity difference between the two sections:
[tex]P_1[/tex] + 1/2ρ[tex]v_1^2[/tex] =[tex]P_2[/tex] + 1/2ρ[tex]v_2^2[/tex]
where[tex]P_1[/tex] and [tex]P_2[/tex] are the pressures at sections 1 and 2, respectively, and ρ is the density of water.
Assuming the pipe is open to the atmosphere at both ends, we can set [tex]P_1[/tex] = [tex]P_2[/tex]= [tex]P_a_t_m[/tex], where [tex]P_a_t_m[/tex] is the atmospheric pressure.
Substituting the expression for [tex]A_1v_1[/tex] from the continuity equation into the Bernoulli's equation, we get:
[tex]P_a_t_m[/tex] + 1/2ρ[tex]v_1^2[/tex] = [tex]P_a_t_m[/tex] + 1/2ρ[tex]v_2^2[/tex] + 104
Canceling out the atmospheric pressure terms, simplifying, and solving for [tex]v_1[/tex], we get:
[tex]v_1[/tex] = [tex]v_2[/tex] * sqrt[tex](A_2/A_1)[/tex] * sqrt(1 - 2104/(ρ[tex]v_2^2[/tex] ))
Substituting the given values, we get:
[tex]v_1[/tex] = 6 m/s * sqrt(1/4) * sqrt(1 - 2104/([tex]10006^2[/tex])) ≈ 2.26 m/s
For more such questions on velocity, click on:
https://brainly.com/question/25905661
#SPJ11
the two stars in a binary star system have masses 2.0 x 1030 kg and 6.0 x 1030 kg. they are separated by 2.0 x 1012 m. what are a. the system's rotation period, in years? b. the speed of each star?
a) The system's rotation period is approximately 399.3 years.
b) The speed of star 1 is approximately [tex]2.53 * 10^4[/tex] m/s, and the speed of star 2 is approximately [tex]5.67 * 10^4[/tex] m/s.
a. To calculate the system's rotation period, we can use Kepler's third law for binary star systems, which states that the square of the period of revolution (T²) of two stars in a binary system is proportional to the cube of the semi-major axis (a³) of their elliptical orbit.
Mathematically, this can be expressed as:
[tex]T^2 \propto a^3[/tex]
Rearranging the equation, we get:
[tex]T = k * a^{(\frac{3}{2} )}[/tex]
Where T is the period of revolution, a is the semi-major axis of the orbit, and k is a constant of proportionality.
Given:
Mass of star 1 (m₁) = [tex]2.0 * 10^{30}[/tex] kg
Mass of star 2 (m₂) = [tex]6.0 * 10^{30}[/tex] kg
Separation between stars (a) = [tex]2.0 * 10^{12}[/tex] m
We can assume k = 1, as it is just a constant of proportionality.
Plugging in the given values, we get:
[tex]T = (2.0 * 10^{12})^{(\frac{3}{2} )}[/tex]
Calculating the value of T using a calculator, we get:
[tex]T = 1.26 * 10^{13}[/tex] seconds
Now we can convert the time from seconds to years:
1 year = [tex]3.1536 * 10^7[/tex] seconds (approximately)
T (in years) [tex]=\frac{(1.26 * 10^{13})}{(3.1536 * 10^7)}[/tex]
T (in years) ≈ 399.3 years (rounded to one decimal place)
So, the system's rotation period is approximately 399.3 years.
b) To calculate the speed of each star, we can use the formula for orbital velocity in a circular orbit:
[tex]v = \sqrt{\frac{GM}{r}}[/tex]
Where v is the orbital velocity, G is the gravitational constant [tex](6.67430 * 10^{-11} m^3 kg^{-1} s^{-2})[/tex], M is the mass of the star, and r is the distance between the stars.
We can calculate the orbital velocity for each star separately using their respective masses and the given separation between the stars.
For star 1 [tex](m_1 = 2.0 * 10^{30} kg)[/tex]:
[tex]v_1 = \sqrt{(\frac{G * m_2}{a})}[/tex]
For star 2 [tex](m_2 = 6.0 * 10^{30} kg)[/tex]:
[tex]v_2 = \sqrt{(\frac{G * m_1}{a})}[/tex]
Plugging in the given values, we get:
[tex]v_1 = \sqrt{\frac{(6.67430 * 10^{-11} * 6.0 * 10^{30})}{2.0 * 10^{12}})}[/tex]
[tex]v_2 = \sqrt{\frac{(6.67430 * 10^{-11} * 2.0 * 10^{30})}{2.0 * 10^{12}})}[/tex]
Calculating the values using a calculator, we get:
v₁ ≈ [tex]2.53 * 10^4[/tex] m/s
v₂ ≈ [tex]5.67 * 10^4[/tex] m/s
Learn more about binary star systems here:
https://brainly.com/question/13842325
#SPJ4
a noisy machine in a factory produces a decibel rating of 80 db how many identical machines could you add to the factory
The maximum number of identical machines with a decibel rating of 80 dB that can be added to the factory without exceeding the 90 dB limit set by federal regulations is 10 machines.
To determine the maximum number of identical noisy machines with a decibel rating of 80 dB that can be added to a factory without exceeding the 90 dB limit set by federal regulations, you need to use the formula for combining sound levels. The formula is:
L_total = 10 log10(N) + 10 log10(I/I_0)
Where L_total is the total sound level in decibels, N is the number of identical sound sources, I is the intensity of the sound source, and I_0 is the reference intensity.
In this case, the decibel rating of the machine is 80 dB. To find the intensity of the sound source, we can use the following formula:
I = I_0 * 10^(L/10)
Where I is the intensity, I_0 is the reference intensity, and L is the decibel level.
Substituting the given values, we get:
I = I_0 * 10^(80/10) = I_0 * 10^8
Now we can use the formula for combining sound levels to find the maximum number of identical machines:
90 = 10 log10(N) + 10 log10(I/I_0)
Substituting the values we found,
90 = 10 log10(N) + 10 log10(10^8)
90 = 10 log10(N) + 80
10 log10(N) = 10
log10(N) = 1
N = 10
To know more about decibel, here
brainly.com/question/30140856
#SPJ4
--The complete question is, A noisy machine in a factory produces a decibel rating of 80 dB. How many identical machines could you add to the factory without exceeding the 90 dB limit set by federal regulations?--
a block of mass 3.0 kg is hung from a spring, causing it to stretch 12 cm at equilibrium, as shown above. the 3.0 kg block is then replaced by a 4.0 kg block, and the new block is released from the position shown above, at which the spring is unstretched. how far will the 4.0 kg block fall before its direction is reversed?
The 4.0 kg block will fall 9 cm before its direction is reversed.
To solve this problem, we need to use the conservation of energy. At equilibrium, the spring potential energy is equal to the gravitational potential energy, so we can write:
(1/2) k x² = m g h
where k is the spring constant, x is the stretch of the spring at equilibrium, m is the mass of the block, g is the acceleration due to gravity, and h is the height of the block above its equilibrium position.
We can use this equation to find the spring constant:
k = 2 m g x / x²
Substituting the given values, we get:
k = 2 (3.0 kg) (9.81 m/s²) (0.12 m) / (0.12 m)² = 735 N/m
When the 4.0 kg block is released, the spring will stretch until the gravitational force on the block equals the spring force. At this point, the block will momentarily stop and then start moving back up.
We can use the conservation of energy again to find the distance the block will fall before it stops: (1/2) k x² = (1/2) m v² + m g (h - x)
where v is the velocity of the block at its lowest point. Since the block is released from rest, v = 0, and we can solve for h:
h = x + (1/2) x = 1.5 x
Substituting the given values, we get:
h = 0.12 m + (1/2) (0.12 m) = 0.18 m
So the block will fall a distance of:
h - x = 0.18 m - 0.12 m = 0.06 m = 6 cm
However, since the block continues to move upward after it stops, it will actually fall twice this distance before its direction is reversed:
2 (h - x) = 2 (0.06 m) = 0.12 m = 12 cm
Finally, since we replaced the 3.0 kg block with a 4.0 kg block, the gravitational force will be greater and the spring will stretch more at equilibrium, but this does not affect the distance the 4.0 kg block falls before its direction is reversed.
To know more about conservation of energy, refer here:
https://brainly.com/question/2137260#
#SPJ11
when a cylindrical capacitor is given a charge of 0.500 nc, a potential difference of 20.0 v is measured between the cylinders. what is the capacitance of this system? if the cylinders are 1.0 m long, what is the ratio of their radii?
The ratio of the radii of the cylinders is approximately 9.38. To find the capacitance of the cylindrical capacitor, we will use the formula:
Capacitance (C) = Charge (Q) / Potential difference (V)
Given the charge Q = 0.500 nC (nano coulombs) and the potential difference V = 20.0 V, we can calculate the capacitance:
C = Q / V
[tex]C = 0.500 * 10^(-9) C / 20.0 V[/tex]
[tex]C = 25 * 10^(-12) F[/tex]
The capacitance of this system is 25 pF (picofarads).
Now, let's find the ratio of the radii of the cylinders. The formula for the capacitance of a cylindrical capacitor is:
[tex]C = (2 * π * ε₀ * L) / ln(b/a)[/tex]
Where ε₀ is the vacuum permittivity [tex](8.854 * 10^(-12) F/m)[/tex], L is the length of the cylinders (1.0 m), and b and a are the radii of the outer and inner cylinders, respectively. We need to find the ratio b/a.
We have already found the capacitance [tex](C = 25 * 10^(-12) F)[/tex], so we can rearrange the formula to solve for the ratio:
[tex]ln(b/a) = (2 * π * ε₀ * L) / C[/tex]
Now, substitute the given values:
[tex]ln(b/a) = (2 * π * (8.854 * 10^(-12) F/m) * 1.0 m) / (25 * 10^(-12) F)[/tex]
[tex]ln(b/a) ≈ 2.239[/tex]
To find the ratio of the radii, we just need to exponentiate both sides:
[tex]b/a = e^(2.239)b/a ≈ 9.38[/tex]
to know more about Capacitance refer here:
https://brainly.com/question/28445252#
#SPJ11
what is the rms-current irms in the circuit when vrms = 30.0 v, c = 1.8 µf, and f = 4.0 khz?
The rms current in the circuit is 1.36 A when vrms is 30v , c = 1.8 µf, and f= 4.0khz.
To determine the rms current (Irms) in a circuit with a known rms voltage (Vrms), capacitance (C), and frequency (f), we can use the formula:
Irms = Vrms / (XC)
where XC is the capacitive reactance of the circuit, given by:
XC = 1 / (2πfC)
where π is the mathematical constant pi (approximately 3.14).
Substituting the given values into these equations, we
get:
XC = 1 / (2πfC) = 1 / (2 x 3.14 x 4000 x 1.8 x 10^-6) = 22.09 ohms
Irms = Vrms / (XC) = 30.0 V / 22.09 ohms = 1.36 A (rounded to two significant figures)
learn more about rms current here:
https://brainly.com/question/30097489
#SPJ11
starting from the core of the sun and going outward, the temperature decreases. yet, above the photosphere, the temperature increases. how can this be?
This is due to the presence of Electromagnetic waves that carry huge amounts of energy with the addition of the sun's magnetic field from its interior core to the outside.
This is a theory given by the great Swedish scientist Hannes Alfven in 1942, this theory readily explains the complex increase in the temperature of the photosphere in comparison to other spheres.
Hence it can be said the presence of electromagnetic waves due to the earth's surface and the heat and magnetic pull and outward the temperature by the sun results in the optimum increase in temperature of the photosphere. The resultant temperature of the photosphere exceeds 20,000 degrees Celsius.
To learn more about Electromagnetic waves,
https://brainly.com/question/10178955
#SPJ4
what magnetic force (magnitude and direction) do the two wires exert on one another?is the force large enough to stress the insulation holding the wires together
Parallel wires carrying current in the same direction experience a perpendicular magnetic force that depends on the distance between them, the current, and magnetic field strength. The force's strength may cause insulation stress, but this depends on these factors.
To determine the magnetic force exerted between two wires carrying current, we need to apply the right-hand rule for magnetic fields.
Assuming the two wires are parallel and carrying current in the same direction, the magnetic field around each wire will be circular and will point in the same direction for both wires. If we imagine holding our right hand with the fingers pointing in the direction of the current in one wire, the thumb will point in the direction of the magnetic field around that wire. The magnetic field will then be pointing towards the other wire.
Now, if we imagine the magnetic field around the second wire and again use the right-hand rule, we see that the magnetic field will be pointing towards the first wire. The two magnetic fields will be interacting, creating a force that is perpendicular to both the magnetic fields and the direction of the current. This force is known as the Lorentz force.
The magnitude of the force can be calculated using the following formula: F = BIL, where F is the force, B is the magnetic field strength, I is the current, and L is the length of the wire. The direction of the force can be determined using the right-hand rule.
The force between the wires will depend on the distance between them, the current flowing through them, and the magnetic field strength. If the wires are close enough together and carrying a large enough current, the force may be significant enough to stress the insulation holding the wires together.
In conclusion, without more specific information about the current, distance between the wires, and the insulation properties, it is difficult to determine whether the magnetic force will be large enough to stress the insulation holding the wires together.
Learn more about Magnetic Force :
https://brainly.com/question/29569933
#SPJ4
Two sumo wrestlers are in a match. At the start of the match, they both lunge at each other. They hit and miraculously come to a standstill. One wrestler was 200kg and traveling at a velocity of 2.3m/s at the instance of collision. If the other wrestler was traveling at 2.9m/s, what is his mass?
This issue can be resolved by applying the momentum conservation principle. The total amount of momentum prior to and following the impact are equal. This can be expressed as:
(M1 + M2)vf = m1v1 + m2v2
m1 equals 200 kilograms (mass of wrestler 1)
v1 = 2.3 m/s (velocity of wrestler 1) (velocity of wrestler 1)
v2 = 2.9 m/s (velocity of wrestler 2) (velocity of wrestler 2)
m2 = the wrestler's mass two (unknown)
vf is the wrestlers' combined final speed before the collision (which we know is zero)
It's the same response we previously received. The problem is that the negative sign shows that Wrestler 2's velocity is moving in the opposite direction from Wrestler 1's velocity. Wrestler 2 is therefore traveling against the current. To gather the wrestlers in bulk
If r 2 is 2, we can omit the minus sign and use the absolute value instead:
As a result, wrestler 2 weighs roughly 158.62 kg.
What's a good illustration of momentum and impulse?In order to change the momentum of an object, you must exert a certain amount of force over a specific period of time. It is because of this. For instance, when you strike a ball with a cricket bat, you exert power temporarily (in this case, very briefly) in order to change (or transfer) the momentum of the ball. |m2| = 158.62 kg
To know more about collision visit:-
brainly.com/question/30636941
#SPJ9
Hint In the previous sections, you found v² = 2ugd and determined you could
plot v² on the vertical axis and d on the horizontal axis to get a straight line
where the slope is equal to 2µg.
Answer:
Explanation:
Based on the given hint, it appears that the question is related to the analysis of a physics experiment involving the relationship between velocity, distance, and acceleration due to gravity.
Given that the formula v² = 2ugd is being used, it suggests that the experiment involves dropping an object from a height d and measuring the distance it travels over time, as well as the final velocity it reaches. By plotting the squared velocity (v²) on the vertical axis and distance (d) on the horizontal axis, a straight line can be obtained with a slope of 2ug, where u is the coefficient of friction and g is the acceleration due to gravity.
However, without further information or data from the experiment, it is impossible to determine the specific value of the scale factor used.
identify the true statement. a. s-waves are compressional body waves, while p-waves are shear body waves. b. p-waves and s-waves are seismic surface waves. c. surface waves typically have the largest amplitude. d. surface waves are the first to show up on a seismogram recording of a quake.
The true statement is Surface waves typically have the largest amplitude.(C)
Seismic waves are classified into two types: body waves and surface waves. Body waves include P-waves (primary or compressional waves) and S-waves (secondary or shear waves). These waves travel through the Earth's interior.
On the other hand, surface waves travel along the Earth's surface and generally have larger amplitudes than body waves. As a result, they cause more damage during earthquakes. Options a, b, and d are incorrect because they either misclassify the waves or provide inaccurate information about their arrival time on a seismogram.(C)
To know more about Seismic waves click on below link:
https://brainly.com/question/13056218#
#SPJ11
gravity is 3.71 m/s2. in the earth tests, when m is set to 15.0 kg and allowed to fall through 4.00 m, it gives 150.0 j of kinetic energy to the drum.
the given values, we get:m = 2(150 J) / (v = sqrt(2gh)) = 2(150 J) / sqrt(2(3.71 m/s²)(4.00 m))m ≈ 12.8 kg The mass of the object is approximately 12.8 kg.
When m is set to 15.0 kg and allowed to fall through 4.00 m, it gives 150.0 J of kinetic energy to the drum. The acceleration due to gravity is 3.71 m/s².What is kinetic energy?Kinetic energy is the energy of motion, and it is a scalar quantity that depends on an object's mass and velocity. Kinetic energy can be calculated using the following
formula:K.E. = 1/2mv²where m is the mass of the object and v is the velocity of the object.What is the given kinetic energy?The given kinetic energy is 150 J.What is the mass of the object?Using the formula for kinetic energy, we can rearrange it to solve for m. Thus, we get:K.E. = 1/2mv² ⇒ 2K.E. = mv² ⇒ m = 2K.E. / v²Substituting
The following values are obtained from the given ones:m = 2(150 J) / (v = sqrt(2gh)) = 2(150 J) / sqrt(2(3.71 m/s2)(4.00 m)). m ≈ 12.8 kg The thing weighs about 12.8 kg.
To learn more about : approximately
https://brainly.com/question/12785175
#SPJ11
in a crystal like nacl, there is a family of planes 0.28 nm apart. if the first-order maximum is observed at an incidence angle of 17.1, what is the wavelength of the x-ray scattering from this crsysatla?
The wavelength of the x-ray scattering from this crystal is approximately 0.154 nm.
To solve this problem, we can use Bragg's Law, which relates the wavelength of the x-ray scattering to the spacing between the crystal planes and the angle of incidence:
nλ = 2d sinθ
where:
n = 1 (first-order maximum)
λ = wavelength of the x-ray scattering (unknown)
d = spacing between the crystal planes (0.28 nm)
θ = angle of incidence (17.1 degrees)
First, we need to convert the angle of incidence from degrees to radians:
θ = 17.1 degrees × (π/180 degrees) = 0.298 radians
Then, we can plug in the known values and solve for the wavelength of the x-ray scattering:
1λ = 2(0.28 nm) sin(0.298)
λ = 2(0.28 nm) sin(0.298)
λ ≈ 0.154 nm
To know more about wavelength, here
brainly.com/question/17310478
#SPJ4
a dart is loaded into a spring-loaded toy dart gun by pushing the spring in by a distance d. for the next loading, the spring is compressed a distance 6d. how much work is required to load the second dart compared to that required to load the first?
A dart is loaded into a spring-loaded toy dart gun by pushing the spring in by a distance d. for the next loading, the spring has compressed a distance 6d. It requires 36 times more work to load the second dart compared to the first.
To determine the amount of work required to load the second dart compared to the first, we can use the formula for work done on a spring:
Work = (1/2) * k * x^2
Here, k is the spring constant and x is the distance the spring is compressed.
For the first dart, the work required is:
Work1 = (1/2) * k * d^2
For the second dart, the spring is compressed by a distance of 6d, so the work required is:
Work2 = (1/2) * k * (6d)^2
Now, we can find the ratio of the work required for the second dart to that of the first:
Work2 / Work1 = [(1/2) * k * (6d)^2] / [(1/2) * k * d^2]
The spring constant k and (1/2) are common factors and can be cancelled out:
Work2 / Work1 = (6d)^2 / d^2
By squaring 6d:
Work2 / Work1 = 36d^2 / d^2
The d^2 terms cancel out, leaving:
Work2 / Work1 = 36
For more such questions on distance
brainly.com/question/28529268
#SPJ11
In the drawing below, R1 has a resistance of 6.8 Ω and R2 has a resistance of 1.9-Ω. Determine the current (magnitude and direction) in the 6.8 and 1.9-Ω resistors in the drawing.
For the 6.8 Ω resistors, the voltage across it is V1 = 4.0 V, so the current through it is I1 = V1 / R1 = 4.0 V / 6.8 Ω = 0.588 A
For the 1.9 Ω resistors, the voltage across it is V2 = 12 V, so the current through it is:
I2 = V2 / R2 = 12 V / 1.9 Ω = 6.32 A, directed from the negative terminal of V2 to the positive terminal.
Therefore, the current in the 6.8 Ω resistor is 0.588 A directed from the positive terminal of V1 to the negative terminal, and the current in the 1.9 Ω resistor is 6.32 A directed from the negative terminal of V2 to the positive terminal.
What are resistors?Resistors are electronic components used in electrical circuits to provide a specific amount of resistance to the flow of electric current. They are designed to impede the current flow and reduce the amount of voltage flowing through a circuit.
What does a circuit consist of?An electrical circuit consists of a closed loop of conductive material through which electric current can flow. A circuit typically includes a power source, wires to connect the components, and various components such as resistors, capacitors, inductors, diodes, and transistors, among others.
To learn more about electricity, visit here:
https://brainly.com/question/8971780
#SPJ9
if we view events occurring on a star that is collapsing to become a black hole, do we see time speeding up or slowing down?
When observing events happening on a star that is collapsing to become a black hole, we see time slowing down. This phenomenon is called time dilation.
It is due to the gravitational force of the collapsing star being so powerful that it causes time to slow down as the star's matter is crushed into an infinitely small point, known as a singularity.
Time dilation refers to the difference in elapsed time as measured by two observers due to a relative velocity between them or to a difference in gravitational potential between their locations.
This effect arises from the nature of spacetime described by the theory of relativity.
To know more about time dilation, refer here:
https://brainly.com/question/1933572#
#SPJ11