11. A \( 30.0 \)-g bullet is fired from a gun and posssesses \( 1750 \mathrm{~J} \) of kinetic energy. Find its velocity.

47 degrees is equal to 0.8203 radians.

To convert degrees to radians, we can use the following conversion formula:

radians = (degrees * π) / 180

Where:

degrees is the measurement in degrees

π (pi) is a mathematical constant approximately equal to 3.14159

To convert 47 degrees into radians, we will use the following formula;

Radian = (Degree × π) / 180 Where π = 3.14 radians

47 degrees is given, so we can substitute it into the formula:

Radian = (Degree × π) / 180

Radian = (47 × 3.14) / 180

Radian = 0.8203 radians

Therefore, 47 degrees is equal to 0.8203 radians.

Learn more about radians https://brainly.com/question/19278379

#SPJ11

Answer:

by using headings that set apart each point

When the 2nd ball is initially at rest, the velocity of ball 1 is 0 m/s and the velocity of ball 2 is 1.50 m/s. When the 2nd ball is moving toward the first with a speed of 1.00 m/s, the velocity of ball 1 is 0.25 m/s and the velocity of ball 2 is 1.25 m/s.

The formula for elastic collision is:

v1f = (m1 - m2)/(m1 + m2) * v1i + 2m2/(m1 + m2) * v2i

v2f = 2m1/(m1 + m2) * v1i + (m2 - m1)/(m1 + m2) * v2i

Given:

Initial velocity of ball 1, v1i = 1.50 m/s

Initial velocity of ball 2, v2i = 0 m/s (initially at rest)

Mass of ball 1 = Mass of ball 2

Calculations:

(a) When the 2nd ball is initially at rest:

Total mass, m = m1 + m2 = m1 + m1 = 2m1

Let's assume the final velocity of ball 1 and ball 2 are v1f and v2f, respectively.

v1f = (m1 - m1)/(2m1) * 1.50 m/s + 2m1/(2m1) * 0 m/s

v1f = 0 m/s

v2f = 2m1/(2m1) * 1.50 m/s + (m1 - m1)/(2m1) * 0 m/s

v2f = 1.50 m/s

(b) When the 2nd ball is moving toward the first with a speed of 1.00 m/s:

Initial velocity of ball 2, v2i = -1.00 m/s (moving towards ball 1)

Total mass, m = m1 + m2 = m1 + m1 = 2m1

Let's assume the final velocity of ball 1 and ball 2 are v1f and v2f, respectively.

v1f = (m1 - m1)/(2m1) * 1.50 m/s + 2m1/(2m1) * (-1.00 m/s)

v1f = -0.25 m/s

v2f = 2m1/(2m1) * 1.50 m/s + (m1 - m1)/(2m1) * (-1.00 m/s)

v2f = 1.25 m/s

(c) When the 2nd ball is moving away from the first with a speed of 1.00 m/s:

Initial velocity of ball 2, v2i = 1.00 m/s (moving away from ball 1)

Total mass, m = m1 + m2 = m1 + m1 = 2m1

Let's assume the final velocity of ball 1 and ball 2 are v1f and v2f, respectively.

v1f = (m1 - m1)/(2m1) * 1.50 m/s + 2m1/(2m1) * 1.00 m/s

v1f = 0.25 m/s

v2f = 2m1/(2m1) * 1.50 m/s + (m1 - m1)/(2m1) * 1.00 m/s

v2f = 1.25 m/s

Hence the velocities of each ball after the collision are as follows:

(a) when the 2nd ball is initially at rest, velocity of ball 1: 0 m/s, velocity of ball 2: 1.50 m/s

(b) when the 2nd ball is moving toward the first with a speed of 1.00 m/s, velocity of ball 1: 0.25 m/s, velocity of ball 2: 1.25 m/s.

Learn more about velocity: https://brainly.com/question/80295

#SPJ11

The reading on the spring balance is 0.4 N.

When a force of 18.0 N is applied to the 6.0 kg block and there is no friction between the blocks and the horizontal surface. A spring balance is connected between two blocks. We are required to find the reading on the spring balance.

For that, we can use the formula of force that acts between the blocks connected by a spring balance. The formula is given as below:

F = kx where F is the force that acts between two blocks, k is the spring constant, and x is the displacement of the spring.The force that acts on the blocks is equal to the force applied on the heavier block. i.e., 18.0 N

The mass of the two blocks is M = 4.0 + 6.0 = 10.0 kg

The acceleration of the two blocks is given as follows:

For the heavier block 6.0 kg:

F = m₁a   where m₁ is mass of the block

F = 18 N, m₁ = 6.0 kg

So, a = 18.0/6.0 = 3.0 m/s²

For the lighter block 4.0 kg:F = m₂a   where m₂ is mass of the block m₂ = 4.0 kg

So, a = 3.0 m/s²

Using the force formula F = kxk = F/x = 18.0/0.4 = 45.0 N/m

The force on the spring is given as:F = kx

So, x = F/k = 18.0/45.0 = 0.4 m

Therefore, the reading on the spring balance is 0.4 m or 0.4 N (because 1 N/m = 1 N/m)

Answer: The reading on the spring balance is 0.4 N.

Know more about acceleration here,

https://brainly.com/question/2303856

#SPJ11

At a p-n junction, the diffusion and recombination of charge carriers form a depletion region, and when forward biased, it allows current flow, while reverse bias inhibits current flow.

A P-N junction is an interface or a boundary between two semiconductor material types, namely the p-type and the n-type, inside a semiconductor.

In a p-type semiconductor, the majority carriers are holes, which are essentially positively charged vacancies in the valence band.

In contrast, an n-type semiconductor has excess electrons as the majority carriers. At a p-n junction, the diffusion and recombination of charge carriers lead to the formation of a depletion region.

Forward bias reduces the potential barrier, allowing current flow, while reverse bias increases the barrier, inhibiting current flow.

Learn more about p-n junction here: https://brainly.com/question/27753295?source=archive

#SPJ4

Two examples of exceptions to the general rules of the patterns of motion in our solar system are Retrograde motion and  Irregular moons

Two examples of exceptions to the general rules of the patterns of motion in our solar system are retrograde motion and irregular moons.

1. Retrograde motion: Retrograde motion refers to the apparent backward or reverse motion of a planet in its orbit. Normally, planets move in a prograde or eastward direction around the Sun. However, due to the varying orbital speeds of planets, there are times when a planet appears to slow down, reverse its direction, and move westward relative to the background stars. This is known as retrograde motion. It occurs because of the differences in orbital periods and distances of planets from the Sun.

2. Irregular moons: Most moons in the solar system follow regular, predictable orbits around their parent planets. However, there are some moons, known as irregular moons, that have more eccentric and inclined orbits. These moons exhibit irregular patterns of motion compared to the regular, prograde motion of the larger moons. Their orbits may be highly elongated, inclined, or even retrograde. Examples of irregular moons include the moons of Jupiter, such as Ananke and Carme. These exceptions highlight the complexity and diversity of celestial motion within our solar system, demonstrating that not all celestial bodies follow the same predictable patterns of motion as the planets.

Learn more about  Irregular moons here:

https://brainly.com/question/31956114

#SPJ11

The fundamental period (TI) for x1(t) is 2π, (T2) for x2(t) is 2 and x3(t) is nonperiodic. Powers P1 and P2 values are 1/2 while the power of P3 cant be determined since x3(t) is nonperiodic.

Given signals are;x1(t) = cos(t) x2(t) = sin(πt) x3(t) = x1(t) + x2(t)a) To find the fundamental period of T1;The fundamental period of a signal x(t) is denoted by T0, and it is defined as the smallest value of T such that x(t) = x(t+T) for all values of t. Therefore, x1(t) = x1(t+T1), whereT1= 2π/ω1= 2π/1= 2π. Thus, the fundamental period of x1(t) is T1= 2π.b) To find the fundamental period of T2;x2(t) = x2(t+T2), whereT2 = 2π/ω2= 2π/π= 2Thus, the fundamental period of x2(t) is T2 = 2.c) To determine if T3 is periodic or non-periodic and show the evident;x3(t) = x1(t) + x2(t) Therefore,x3(t) = cos(t) + sin(πt)If we assume T3 exists, then we can say thatx3(t) = x3(t + T3)cos(t) + sin(πt) = cos(t + T3) + sin(π(t + T3))

Therefore, the function will be periodic if the following conditions are satisfied: cos(t + T3) = cos(t)sin(π(t + T3)) = sin(πt)Expanding the above expression, cos(t + T3) = cos(t)sin(πt)cos(T3) + cos(πt)sin(πt)sin(T3) = sin(πt). Simplifying, cos(T3) = 1Therefore, T3 is a multiple of 2π. Also, sin(T3) = 0.If T3 exists, it must be a multiple of T1 and T2.LCM(T1, T2) = LCM(2π, 2) = 2πThe multiple of 2π is 2π itself. Therefore, T3 = 2πd, where d is a constant. But since sin(T3) = 0, d must be an even integer.T3 is periodic with a fundamental period of 2πd. Thus, T3 = 4π.d) To determine the power P1, P2 and P3 of each signal; Power is defined as the average value of the energy carried by the signal over the given time.T1 = 2π, ω1 = 1; P1 = (1/T1)∫(T1/2)^(T1/2)x1^2(t) dt= (1/2π) ∫π^(-π) cos^2(t) dt= 1/2.T2 = 2, ω2 = π; P2 = (1/T2)∫(T2/2)^0x2^2(t) dt= (1/4) ∫2^0 sin^2(πt) dt= 1/4.T3 = 4π; P3 = (1/T3)∫(T3/2)^(-T3/2)x3^2(t) dt= (1/8π) ∫2π^(-2π) (cos(t) + sin(πt))^2 dt= (1/8π) [π + 2] = (π + 2)/8π.

Learn more about fundamental period:

https://brainly.com/question/15861094

#SPJ11

The radius of a beryllium-9 nucleus is approximately 2.28 fm. The word "radius" is derived from Latin and means "ray" as well as "the spoke of a chariot wheel."

The radius of a nucleus can be estimated using the empirical formula for nuclear radius:

r = r0 * A^(1/3)

where r is the radius of the nucleus, r0 is a constant (approximately 1.2 fm), and A is the mass number of the nucleus.

For a beryllium-9 nucleus (with A = 9), the radius would be:

r = 1.2 fm * 9^(1/3) ≈ 2.28 fm

In classical geometry, a circle's or sphere's radius (plural: radii) is any line segment that connects the object's centre to its perimeter; in more contemporary usage, it also refers to the length of those line segments.

To know more about radius

https://brainly.com/question/13449316

#SPJ11

The net force on charge Q = 5C due to the other charges is 36N, directed to the left.

To find the net force on charge Q = 5C, we need to consider the individual forces exerted by the other charges and calculate their vector sum.

Given the charges in the diagram, the force between two charges can be calculated using Coulomb's law:

[tex]F = k * |q1| * |q2| / r^2[/tex]

where F is the force, k is the electrostatic constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

In this case, charge Q = 5C is influenced by two other charges:

Charge A = -3C located 2m to the left of Q.

Charge B = +4C located 3m to the right of Q.

Calculating the force between Q and A:

[tex]F1 = k * |Q| * |A| / r^2 = k * |5C| * |(-3C)| / (2m)^2[/tex]

Calculating the force between Q and B:

[tex]F2 = k * |Q| * |B| / r^2 = k * |5C| * |(+4C)| / (3m)^2[/tex]

Adding the individual forces together:

Net force = F1 + F2

Substituting the values and simplifying:

Net force = [tex]k * (5C * 3C / (2m)^2 - 5C * 4C / (3m)^2) = k * (15C^2 / 4m^2 - 20C^2 / 9m^2)[/tex]

Using the value of the electrostatic constant k = 9 × 10^9 N m^2/C^2, we can calculate the numerical value of the net force:

Net force =[tex](9 * 10^9 N m^2/C^2) * (15C^2 / 4m^2 - 20C^2 / 9m^2)[/tex]

         ≈ 36N (directed to the left)

Therefore, the net force on charge Q = 5C due to the other charges is approximately 36N, directed to the left.

Learn more about distance here:

https://brainly.com/question/12626613

#SPJ11

The complete question is:

Find the net force on charge Q=5c due to other charges shown,

The acceleration at which block A starts to slide out from under block B is [tex]a = (μs * mB * g) / mA[/tex].

When block A is pulled with an increasing force, it experiences a static friction force in the opposite direction. The maximum static friction force that can be exerted between the two blocks is given by the equation. [tex]a = (μs * mB * g) / mA[/tex]

Where μs is the coefficient of static friction, and N is the normal force. For block A to start sliding out from under block B, the maximum static friction force should equal the force pulling block A. Therefore, we have [tex]F_friction = μs * N = F_pull[/tex]

The normal force N is equal to the weight of block B acting downward, which is given by

[tex]N = mB * g[/tex]

Where mB is the mass of block B, and g is the acceleration due to gravity. Substituting N and F_pull into the equation, we get

[tex]μs * mB * g = F_pull[/tex]

Since the force pulling block A is equal to the product of its mass and acceleration ([tex](F_pull = mA * a)[/tex]), we have

[tex]μs * mB * g = mA * a.[/tex]

To learn more about acceleration

brainly.com/question/2303856

#SPJ11

The second (flat) level of the roller coaster is approximately 8.51 meters below the starting level. Therefore, the gravitational potential energy is zero. The mass is 221.0 kg and the velocity is 8.0 m/s, so the kinetic energy is 7048.0 J.

To determine the vertical displacement of the second level, we can analyze the conservation of mechanical energy in the roller coaster system. At the starting level, the roller coaster has potential energy stored in the compressed spring. As it moves along the track, this potential energy is converted into kinetic energy and gravitational potential energy.

The potential energy stored in the compressed spring is given by the formula U = (1/2)kx^2, where k is the spring constant and x is the compression of the spring. In this case, the spring constant is 450.0 N/m and the compression is 10.0 m, so the potential energy is 22500.0 J.

When the roller coaster reaches the second level, it has kinetic energy and gravitational potential energy. Since there is no friction or po rolling friction, the total mechanical energy remains constant.

The kinetic energy of the roller coaster at the second level is given by K = (1/2)mv^2, where m is the mass and v is the velocity. The mass is 221.0 kg and the velocity is 8.0 m/s, so the kinetic energy is 7048.0 J.

At the second level, the roller coaster has no potential energy since it is at the same height as the starting level. Therefore, the gravitational potential energy is zero.

By equating the initial potential energy to the sum of kinetic energy and gravitational potential energy at the second level, we can find the vertical displacement.

22500.0 J = 7048.0 J + 0

The vertical displacement is given by Δy = (K + U - 0) / mg, where m is the mass and g is the acceleration due to gravity.

Substituting the values, we have Δy = (7048.0 J + 22500.0 J) / (221.0 kg * 9.8 m/s^2)

Evaluating the expression, we find that the second level is approximately 8.51 meters below the starting level.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

The work done by the force of the rope dragging the object is approximately 1049.84 ft-lb.

The work done by a force is given by the product of the magnitude of the force, the displacement, and the cosine of the angle between the force and the direction of displacement. In this case, the force applied by the rope is 43.9 lb and the displacement is 26.8 ft.

Using the given angle of 27.0 degrees, we can calculate the work done as follows:

W = 43.9 lb * 26.8 ft * cos(27.0°).

To evaluate the cosine function, the angle needs to be in radians. Converting 27.0 degrees to radians gives 0.471 radians.

Substituting the values into the equation, we get:

W = 43.9 lb * 26.8 ft * cos(0.471).

Evaluating the cosine function, we find cos(0.471) ≈ 0.920.

Finally, we can calculate the work done:

W = 43.9 lb * 26.8 ft * 0.920 ≈ 1049.84 ft-lb.

Learn more about work done here:

https://brainly.com/question/32263955

#SPJ11

The electric potential in a certain region is V = ax² + bx +c where a = 11 V/m², b = −10 V/m², and c = 63 V. We are supposed to find the position where the electric field is zero. Electric field is the negative of the gradient of potential, i.e.,

`E= -grad(V)`

Hence, to find where electric field is zero, we have to find the position where the gradient of potential is zero and then check whether that point is a point of minimum or maximum.

So, `E= -grad(V) = -(∂V/∂x) î`

For the given potential, `V = ax² + bx + c = 11x² - 10x + 63`

So, `E= -grad(V) = -(∂V/∂x) î = (-22x + 10) î`

Hence, electric field is zero when, `(-22x + 10) î = 0 => x = 5/11 m`

Therefore, the position where the electric field is zero is 5/11 m.

Learn more about electric fields: https://brainly.com/question/19878202\

#SPJ11

The output voltage for the given network is 2.9 V.

In the given network if V₁ = 2 mV and ra= 50 kn, the output voltage can be determined . using Kirchoff's voltage law and Ohm's law. In Kirchoff's voltage law, the sum of the voltage drops in a closed loop equals the voltage rise in the same loop. In the network, a closed loop consists of a battery and the circuit's resistance.

Thus,Vin - Ira - Vds = 0 where Vin is the voltage drop across the battery, I is the current, ra is the resistance and Vds is the voltage drop across the resistor. Rearranging the equation, we getVout = Ira which is the voltage drop across the resistance. Using Ohm's law, I=Vds/ra. Substituting Vds=VGTH−Vout and simplifying,Vout=(VGTH-Vin)*ra=3V-2mV*50kΩ=3V-100V=2.9V.Vout = 2.9 V.

Simulation can be carried out using any available software.

Let's learn more about voltage:

https://brainly.com/question/1176850

#SPJ11

Approximately 1.4106 x 10^16 electrons have been transferred during the charging process of the capacitor.

To find the number of electrons transferred during the charging process of a capacitor, we can use the equation:

Q = CV

Where:

Q is the charge transferred (in Coulombs),

C is the capacitance of the capacitor (in Farads),

V is the potential difference across the capacitor (in Volts).

Given:

C = 3.7 x 10^(-6) F

V = 610 V

Substituting these values into the equation, we have:

Q = (3.7 x 10^(-6) F)(610 V)

Q = 2.257 x 10^(-3) C

Now, we know that the charge of one electron is approximately 1.6 x 10^(-19) C. To find the number of electrons transferred, we can divide the total charge by the charge of one electron:

Number of electrons = Q / (1.6 x 10^(-19) C)

Number of electrons = (2.257 x 10^(-3) C) / (1.6 x 10^(-19) C)

Performing the calculation, we get:

Number of electrons = 1.4106 x 10^(16)

Therefore, approximately 1.4106 x 10^16 electrons have been transferred during the charging process of the capacitor.

Learn more about capacitor

https://brainly.com/question/31057014

#SPJ11

The drift velocity of the charges in the wire when a 5 Volts battery is applied across it is approximately 7.8 × 10^3 m/s. The correct answer is option B. To find the drift velocity of charges in the wire, we can use the formula:

v_d = I / (n * A * q)

Where:

v_d is the drift velocity,

I is the current flowing through the wire,

n is the number of charge carriers per unit volume,

A is the cross-sectional area of the wire,

q is the charge of each carrier.

First, let's find the current I using Ohm's Law:

I = V / R

Where:

V is the voltage applied across the wire,

R is the resistance of the wire.

Given that the voltage is 5 Volts and the resistance is 10 Ω, we have:

I = 5 V / 10 Ω = 0.5 A

Next, we need to determine the number of charge carriers per unit volume. Given that the wire contains 2 × 10^20 electrons, we can assume that the number of charge carriers is the same, so:

n = 2 × 10^20 carriers/m^3

Now, we can calculate the drift velocity:

v_d = (0.5 A) / ((2 × 10^20 carriers/m^3) * (2 × 10^-6 m^2) * (1.6 × 10^-19 C))

Simplifying the expression:

v_d = (0.5 A) / (6.4 × 10^-5 carriers * m^-3 * C * m^2)

v_d = 7.8125 × 10^3 m/s

Therefore, the drift velocity of the charges in the wire when a 5 Volts battery is applied across it is approximately 7.8 × 10^3 m/s. The correct answer is option B.

To know more about The drift velocity

brainly.com/question/4269562

#SPJ11

Answer: The statement "The resistance of a wire, made of a homogenous material with a uniform diameter, is inversely proportional to its length" is FALSE.

Resistance is a measure of the degree to which an object opposes the passage of an electric current. The unit of electrical resistance is the ohm (Ω). The resistance (R) of an object is determined by the voltage (V) divided by the current (I)

Ohm's law states that the current in a conductor between two points is directly proportional to the voltage across the two points.  The mathematical expression for Ohm's law is I = V/R, where I is the current flowing through a conductor, V is the voltage drop across the conductor, and R is the resistance of the conductor.

Learn more about resistance : https://brainly.com/question/17563681

#SPJ11

Answer:

The acceleration is 3.5.

Explanation:

According to the question, the initial velocity is given as 1 m/s, the distance travelled is given as 113 m and the final velocity is given as 28 m/s.

Observe equation 1, [tex]v^{2} = u^{2} +2a s[/tex] where v is the final velocity, u is the initial velocity, a is the acceleration and s is the distance. Rearranging for acceleration gives

[tex]a = \frac{v^{2} -u^{2} }{2s}[/tex]

Thus,  [tex]a = \frac{28^{2}-1^{2} }{226}[/tex]

Therefore, acceleration is 3.4646 which is 3.5 to 1 decimal place.

This proves that the channel thickness is constant along the flow and does not depend on the channel width or the velocity of the fluid.

The above channel thickness equation can be proved by making use of continuity equation which states that the product of cross-sectional area and velocity remains constant along the flow.

The velocity of the fluid is directly proportional to the channel depth and inversely proportional to the channel width.

Hence, we can use the following steps to prove the above channel thickness equation: - Continuity equation: A1V1 = A2V2 - Where A is the cross-sectional area and V is the velocity of the fluid. - For a rectangular channel,

A = WD

where W is the channel width and D is the channel depth. - Rearranging the continuity equation for the ratio of channel depth to channel width,

we get: D1/W1 = D2/W2

Substitute D1/W1 = h1 and D2/W2 = h2 in the above equation. - We get the following expression: h1 = h2

The question is incomplete so this is general answer.

This proves that the channel thickness is constant along the flow and does not depend on the channel width or the velocity of the fluid.

Learn more about velocity  here:

https://brainly.com/question/30559316

#SPJ11

An object is placed a distance of 8.88f from a converging lens, where f is the lens's focal length.(a) The location of the image formed by the lens is at dᵢ = infinity (b) Since the image is formed at infinity, it is considered a virtual image.

(c) The magnification of the image can be determined using the magnification formula(d) The image is neither upright nor inverted. It is an "O real" image.

To solve this problem, we can use the lens formula:

1/f = 1/dₒ + 1/dᵢ

where:

Given that the object distance is 8.88f, we can substitute this value into the formula and solve for dᵢ.

(a) Calculating the image distance:

1/f = 1/dₒ + 1/dᵢ

1/f = 1/(8.88f) + 1/dᵢ

To simplify the equation, we can find a common denominator:

1/f = (1 + 8.88f) / (8.88f) = (1 + 8.88f) / (8.88f)

Now we can equate the numerators and solve for dᵢ:

1 = 1 + 8.88f

8.88f = 0

f = 0

Therefore, the image distance is at infinity, which means the image is formed at the focal point of the lens.

(a) The location of the image formed by the lens is at dᵢ = infinity.

(b) Since the image is formed at infinity, it is considered a virtual image.

(c) The magnification of the image can be determined using the magnification formula:

magnification (m) = -dᵢ / dₒ

Since dᵢ is infinity and dₒ is 8.88f, we can substitute these values into the formula:

magnification (m) = -∞ / (8.88f) = 0

Therefore, the magnification of the image is 0.

(d) Since the magnification is 0, the image is neither upright nor inverted. It is an "O real" image.

To learn more about focal length visit: https://brainly.com/question/1031772

#SPJ11

In comparing the gravitational and electrical forces between a proton and a neutron, we can conclude that the gravitational force is much smaller than the electrical force for any distance between the particles.

The gravitational and electrical forces between a proton and a neutron can be compared based on their respective masses and charges.

The mass of a proton is approximately 1.673 x 10^-27 kg, while the mass of a neutron is slightly higher at 1.675 x 10^-27 kg. Therefore, their masses are very similar.

However, when it comes to their charges, a proton has a charge of approximately 1.61 x 10^-19 C, while a neutron has no charge (0 C).

In terms of the gravitational force, which depends on the masses of the particles, the forces between a proton and a neutron would be similar since their masses are very close.

On the other hand, the electrical force, which depends on the charges of the particles, would be significantly different. The presence of a charge on the proton creates an electrical force, while the neutral neutron does not contribute to an electrical force.

Learn more about electrical forces here :-

https://brainly.com/question/20935307

#SPJ11

Answer: A

Explanation:

A satellite of mass 658.5 kg is moving in a stable circular orbit about the Earth at a height of 11RE, where RE = 6400km = 6.400 x 106 m = 6.400 Mega-meters is Earth’s radius.  the gravitational force acting on the satellite while in orbit is approximately [tex]2.443 * 10^4 Newtons.[/tex] Newtons.

The gravitational force acting on the satellite while in orbit can be calculated using the equation for gravitational force:

Force = (Gravitational constant * Mass of satellite * Mass of Earth) / (Distance from satellite to center of Earth)^2

The gravitational constant is denoted by G and is approximately [tex]6.674 * 10^-11 N(m/kg)^2[/tex] The mass of the Earth is approximately [tex]5.972 * 10^{24} kg.[/tex]

The distance from the satellite to the center of the Earth is the sum of the Earth's radius (RE) and the height of the satellite (11RE). Substituting the given values into the equation, we have:

Force =[tex](6.674 * 10^-11 N(m/kg)^2 * 658.5 kg * 5.972 * 10^{24} kg) / ((11 * 6.400 * 10^6 m)^2)[/tex]

Simplifying the expression:

Force ≈ [tex]2.443 * 10^4 Newtons.[/tex]

Therefore, the gravitational force acting on the satellite while in orbit is approximately[tex]2.443 * 10^4 Newtons.[/tex]

Learn more about gravitational force here:

https://brainly.com/question/29190673

#SPJ11

When a ball of mass 2.90 kg strikes a pool table and bounces straight back with a speed of 2.2 m/s, the change in momentum can be calculated by subtracting the initial momentum from the final momentum.

The weight force acting on the ball can be determined by multiplying the mass of the ball by the acceleration due to gravity. The kinetic energy lost during the collision can be calculated as the difference between the initial kinetic energy and the final kinetic energy. The percentage of the original kinetic energy lost can be found by dividing the lost kinetic energy by the initial kinetic energy and multiplying by 100.

To determine the change in momentum of the ball, we subtract the final momentum from the initial momentum. The initial momentum is given by the product of the mass and the initial velocity, which is 2.90 kg * 0 m/s since the ball is at rest. The final momentum is given by the product of the mass and the final velocity, which is 2.90 kg * (-2.2 m/s) since the ball bounces back in the opposite direction.

The weight force acting on the ball can be calculated by multiplying the mass of the ball (2.90 kg) by the acceleration due to gravity (approximately 9.8 m/s^2). This will give us the weight force in Newtons.

To calculate the kinetic energy lost during the collision, we subtract the final kinetic energy from the initial kinetic energy. The initial kinetic energy is given by (1/2) * mass * (initial velocity)^2, and the final kinetic energy is given by (1/2) * mass * (final velocity)^2.

Learn more abut kinetic energy here:

https://brainly.com/question/999862

#SPJ11

The Enterprise needs to come to a stop just as it reaches position of Klingon ship. Therefore position-versus-time graph for Enterprise would be a straight line with a positive slope initially, representing its initial velocity of 60 km/s.

At the moment of collision avoidance, the Enterprise's position should match that of the Klingon ship. This means the two lines on the graph should intersect at the same point.
Mathematically, this can be expressed by setting the equations for the positions of the Enterprise and the Klingon ship equal to each other:
60t = 22t + 150
By rearranging the equation, we have: 60t - 22t = 150
38t = 150
t ≈ 3.95 seconds
Therefore, to just barely avoid a collision with the Klingon ship, the Enterprise needs to achieve an acceleration that brings it to a stop within approximately 3.95 seconds.

Learn more about position here;
https://brainly.com/question/28180944

#SPJ11

Shivani is 60.07 m away from where she started walking.

Shivani's distance travelled is 60 m.

Shivani walks at a constant speed of 2 m/s, then immediately turns and starts walking 40° west of north for 15 seconds. She takes a break for 10 seconds as she figures which way she wants to walk. Finally, she walks 50° east of south for 30 seconds. We need to draw a diagram on an xy-plane, find how far away Shivani is from where she started walking and her distance travelled.

a) To plot Shivani's movements in an xy-plane, follow the given directions. Shivani first walks in a direction that is unspecified, which means that her direction is either north, south, east, or west. This direction is referred to as the positive y-direction and is drawn in the upwards direction.Then Shivani walks 40° west of north for 15 seconds. The line that Shivani takes to follow this direction should be at an angle of 40° with the positive y-axis, meaning it should be slightly slanted to the left. Finally, Shivani walks 50° east of south for 30 seconds. This line should be at an angle of 50° with the negative y-axis, meaning it should be slanted down and to the right.

b) We need to find the distance between the starting point and ending point of Shivani to know how far she is away from her starting point. To do that, we will first find the components of displacement along the X-axis and Y-axis:

Component of displacement along the X-axis = (Distance × cosθ) + (Distance × cosθ)

= Distance × (cosθ - cosθ)

= Distance × 2 sin (90° - θ)

Component of displacement along the Y-axis = (Distance × sinθ) - (Distance × sinθ)

= Distance × (sinθ - sinθ)

= Distance × 2 sin θ cos θ

In the above diagram, AB = 2sin(50°)cos(40°)×2m/s×30s = 37.07 m and CB = 2cos(50°)sin(40°)×2m/s×30s = 47.03 m

So, distance from the starting point = √(AB²+CB²) = √(37.07² + 47.03²) = 60.07 m

Thus, Shivani is 60.07 m away from where she started walking.

c) Distance travelled by Shivani = (2 m/s × 15 s) + (2 m/s × 30 s) = 60 m

Therefore, Shivani's distance travelled is 60 m.

Learn more about xy-plane and distance travelled: https://brainly.com/question/31022166

#SPJ11

People have looked up at birds for years and they have inspired us to fly. Airplanes have wings, just like birds. They also have a light skeleton (or framework) to decrease their weight, and they have a streamlined shape to decrease drag.

Based on the given data table, the elapsed time for Trial B and the average speed for Trial B cannot be determined.

it seems that the data provided in the table is incomplete for Trial B. The values for "time (final)" and "elapsed time" are empty or not provided for Trial B. Without this information, we cannot calculate the elapsed time or the average speed for Trial B.

In the table, the "elapsed time" is typically calculated by subtracting the "time (initial)" from the "time (final)." However, since the values are empty for Trial B, we cannot determine the elapsed time for that trial.

Similarly, the average speed is calculated by dividing the "distance traveled" by the "elapsed time." Without the elapsed time, we cannot determine the average speed for Trial B.

To obtain the missing values and calculate the elapsed time and average speed for Trial B, it is necessary to have the time (final) value or any other relevant information related to the timing of Trial B. Without this information, we cannot provide accurate calculations for the elapsed time or average speed for Trial B.

Learn more about average speed here :-

https://brainly.com/question/13318003

#SPJ11

answer is below ↓↓↓↓

The height difference between the outlet and inlet of the pipe is approximately 2.1 meters.  The height difference between the outlet and inlet of the pipe, we can use Bernoulli's equation, which relates the pressure, velocity, and elevation of a fluid flowing in a pipe.

Bernoulli's equation states:

P₁ + (1/2)ρv₁² + ρgh₁ = P₂ + (1/2)ρv₂² + ρgh₂,

where P₁ and P₂ are the pressures at the inlet and outlet, respectively, ρ is the density of the fluid, v₁ and v₂ are the velocities at the inlet and outlet, h₁ and h₂ are the elevations at the inlet and outlet, and g is the acceleration due to gravity.

In this case, since the process is isothermal, there is no change in the fluid's internal energy. Therefore, the term (1/2)ρv₁² + ρgh₁ = (1/2)ρv₂² + ρgh₂ can be simplified as:

(1/2)ρv₁² + ρgh₁ = (1/2)ρv₂² + ρgh₂.

Since the height at the inlet is given as 0 (h₁ = 0), the equation becomes:

(1/2)ρv₁² = (1/2)ρv₂² + ρgh₂.

We can rearrange the equation to solve for the height difference (h₂ - h₁ = Δh):

Δh = (v₁² - v₂²) / (2g).

Given that the velocity at the inlet (v₁) is 1.2 m/s and the pressures at the inlet and outlet are 26000 Pa and 10000 Pa, respectively, we can use Bernoulli's equation to determine the velocity at the outlet (v₂) using the pressure difference:

P₁ + (1/2)ρv₁² = P₂ + (1/2)ρv₂².

Substituting the given values:

26000 + (1/2)ρ(1.2)² = 10000 + (1/2)ρv₂².

Simplifying and rearranging:

(1/2)ρv₂² = 26000 - 10000 + (1/2)ρ(1.2)².

Substituting the density of water (ρ = 1000 kg/m³):

(1/2)(1000)v₂² = 16000 + (1/2)(1000)(1.2)².

Simplifying and solving for v₂:

v₂ = √((16000 + 600) / 1000) ≈ 4.3 m/s.

Now we can substitute the values of v₁ = 1.2 m/s, v₂ = 4.3 m/s, and g = 9.8 m/s² into the equation for the height difference:

Δh = (1.2² - 4.3²) / (2 * 9.8) ≈ -2.1 m.

The negative sign indicates that the outlet of the pipe is 2.1 meters lower than the inlet.

Therefore, the height difference between the outlet and inlet of the pipe is approximately 2.1 meters.

Learn more about Bernoulli's equation here:

https://brainly.com/question/13098748

#SPJ11

The electron can absorb a photon with an energy of 1.6x10^-18 J to transition from its ground state to its excited state.

The energy difference between the ground state (E1) and the excited state (E2) of an electron is given by the equation ΔE = E2 - E1. Substituting the given values, we have:

ΔE = (-10 eV) - (-15 eV)

= 5 eV

To convert this energy difference to joules, we use the conversion factor: 1 eV = 1.6x10^-19 J. Thus, ΔE in joules is:

ΔE = 5 eV * (1.6x10^-19 J/eV)

= 8x10^-19 J

Comparing this value to the photon energy of 2.4x10^-18 J, we see that it is smaller.

Learn more about photon here:

https://brainly.com/question/33017722

#SPJ11