1 3/4 ÷ 2/3= please help meee♡​

The product is -9xz²/20y of question 1 and the product is 5pq²/6rs² of question 2

One or more variables, constants, and mathematical operations like addition, subtraction, multiplication, and division are all included in an algebraic equation. Instead of utilising particular numbers, it uses symbols and procedures to express a mathematical connection or situation.

To multiply the two fractions, we need to multiply the numerators and denominators separately and then simplify the result:

(-3xy/24z) × (18z²/15x²y)

= (-3 × 18 × x × y × z³) / (24 × 15 × x² × y × z)

= (-9xz²) / (20y)

So the product is -9xz²/20y.

The excluded values are any values of x, y, or z that would make the denominator (20y) equal to zero, as division by zero is undefined. Therefore, the excluded values are: y = 0

Note that this answer assumes that the variables x, y, and z are not equal to zero.

2) To multiply the two fractions, we need to multiply the numerators and denominators separately and then simplify the result:

(7p²/4rs) × (20q²/21p²s)

= (7 × 20 × p² × q²) / (4 × 21 × r × s × p² ×s)

= (5pq²) / (6rs²)

So the product is 5pq²/6rs²

The excluded values are any values of p, q, r, or s that would make the denominator (6rs^2) equal to zero, as division by zero is undefined. Therefore, the excluded values are:  r = 0 or s = 0

Note that this answer assumes that the variables p, q, r, and s are not equal to zero.

Learn more about algebraic equation here

https://brainly.com/question/953809

#SPJ1

Answer:

5,5 m and 12 m

Step-by-step explanation:

Let's assume, the length of the rectangle is x and the width is y meters

Let's write 2 equations and put them in a system:

{x × y = 66,

{x = 2y + 1;

Let's replace x in the 1st equation with its value from the 2nd equation:

(2y + 1) × y = 66

[tex]2 {y}^{2} + y = 66[/tex]

[tex]2 {y}^{2} + y - 66 = 0[/tex]

a = 2, b = 1, c = -66

Let's solve this quadratic equation:

[tex]d = {b}^{2} - 4ac = {1}^{2} - 4 \times 2 \times ( - 66) = 1 + 528 = 529 > 0[/tex]

[tex]y1 = \frac{ - b - \sqrt{d} }{2a} = \frac{ - 1 - 23}{2 \times 2} = \frac{ - 24}{4} = - 6[/tex]

Since y has to be a natural number (side lengths cannot have negative units), we cannot take this as an answer

[tex]y2 = \frac{ - b + \sqrt{d} }{2a} = \frac{ - 1 + 23}{2 \times 2} = \frac{22}{4} = 5.5[/tex]

y = 5,5

x = 2 × 5,5 + 1 = 12

the dimensions of the rectangle are 5.5 meters by 12 meters.

The question states that the area of a rectangle is 66 m², and the length of the rectangle is 1 meter more than twice the width. We need to find the dimensions of the rectangle.

Let’s assume the width of the rectangle as “x”.

Then, according to the given information, the length will be (2x + 1).

Area of the rectangle = Length × Width

66 = (2x + 1) × x ⇒ 2x² + x - 66 = 0

Now we have to solve this quadratic equation. We can solve it by factoring or using the quadratic formula. Let’s use the quadratic formula:

x = [ -b ± √(b² - 4ac) ] / 2aHere, a = 2, b = 1, and c = -66

Therefore,x = [ -1 ± √(1² - 4(2)(-66)) ] / 2(2)x = [ -1 ± √(1 + 528)) ] / 4x = [ -1 ± √529 ] / 4

When we solve this, we get two possible solutions:

x = (-1 + 23) / 4 or x = (-1 - 23) / 4x = 22/4 or x = -24/4x = 5.5 or x = -6

The width of the rectangle cannot be negative. Therefore, the width of the rectangle is 5.5 meters.Length of the rectangle = 2 × 5.5 + 1= 11 + 1= 12 meters

for more questions on dimensions

https://brainly.com/question/27404871

#SPJ11

The given Fahrenheit temperatures evaluated to their Celsius equivalents are: 68°F = 20°C, 32°F = 0°C, 23°F = -5°C, -4°F = -20°C, and -40°F = -40°C.

The expression C = 5/9(F - 32) is used to convert temperatures in degrees Fahrenheit to degrees Celsius. To evaluate the expression for a given Fahrenheit temperature, we simply substitute the value of F into the formula and perform the necessary calculations.

For example, when F = 68, we substitute the value of F into the formula and simplify as follows:

C = 5/9 (68 - 32)

C = 5/9 * 36

C = 20

Here are the evaluations of the given Fahrenheit temperatures in degrees Celsius using the formula C = 5/9(F - 32):

F= 68: C = 5/9(68-32) = 20

F= 32: C = 5/9(32-32) = 0

F= 23: C = 5/9(23-32) = -5

F= -4: C = 5/9(-4-32) = -20

F= -40: C = 5/9(-40-32) = -40

Matching the correct Celsius temperatures to their respective Fahrenheit temperatures:

F= 68: C = 20

F= 32: C = 0

F= 23: C = -5

F= -4: C = -20

F= -40: C = -40

To learn more about Fahrenheit please click on below link        

https://brainly.com/question/30719934

#SPJ1

Given a temperature F in degrees Fahrenheit, the expression C = 5/9(F - 32) gives the temperature in degrees Celsius. Evaluate the following Expressions and Match the correct answer to each the degrees listed.

1. F= 68  

2. F= 32

3. F = 23

4. F = -4

5. F = -40

Let's start by using algebra to solve for the number of boxes in small and large vans.

Let x be the number of small vans and y be the number of large vans. Based on the ratio given, we know that:

- Number of boxes in small vans = 3/8 * Total number of boxes

- Number of boxes in large vans = 5/8 * Total number of boxes

Using the information provided, we can write an equation:

5x + 25y = 400

Simplifying, we get:

x + 5y = 80

Now let's use the inequality provided to determine if less than 30% of the vans filled with boxes are large vans. We know that:

- Total number of vans filled with boxes = x + y

- Less than 30% of these vans are large vans, so y/(x+y) < 0.3

Substituting x + 5y = 80, we can simplify the inequality:

y/(x+y) < 0.3

y/80 < 0.3

y < 24

So if y (the number of large vans) is less than 24, then less than 30% of the vans filled with boxes are large vans.

Now we can solve for x and y using substitution. From x + 5y = 80, we get x = 80 - 5y. Substituting into 5x + 25y = 400, we get:

5(80 - 5y) + 25y = 400

400 - 20y = 400

20y = 0

y = 0

This means that y cannot be less than 24, as y = 0 would result in no large vans at all. Therefore, Hashem's statement is incorrect, and the number of large vans must be equal to or greater than 24.

Answer:

128.75

Step-by-step explanation:

Answer: 128.75

Step-by-step explanation: you do 30% of 168.74 which is 50.62 then subtract it from 168.74 which is 118.12 then get 9% of 118.12 and add it to the 118.12 and that is 128.75

The scatter plot suggests that there is a relationship between the number of chinups and push-ups, but it is not a perfect relationship

What is Scatter plot ?

A scatter plot is a type of graph that is used to display the relationship between two variables. It is a visual representation of a set of data points, where each point represents the values of two variables for a single observation.

Based on the scatter plot, it appears that there is a positive correlation between the number of chin-ups and push-ups several students did. This means that as the number of chin-ups increase, the number of push-ups also tend to increase.

We can see this trend in the general upward slope of the points in the scatter plot. However, there is also a fair amount of variability in the data, as some students did more push-ups than others even when they did a similar number of chin-ups.

Therefore,  the scatter plot suggests that there is a relationship between the number of chin-ups and push-ups, but it is not a perfect relationship

To learn more about Scatter plot from given link.

https://brainly.com/question/30646450

#SPJ1

The number 5 (68) denotes how much Jenna's mother must spend on all of the park entrance tickets along with the full-day food and beverage package.

the total cost for Jenna's water park birthday celebration:Total cost = 5 x 68 + 0.18z

.Equations Let's break down the expression 5 (68):

The number 68 represents the cost of one park entrance ticket with the full-day food and drink package.The number 5 represents the total number of people who need a park entrance ticket with the full-day food and drink package, which includes Jenna and her three friends plus Jenna's mom.So, we can write the following equation to represent the total cost of the park entrance tickets with the full-day food and drink package:

Total cost of park entrance tickets with the full-day food and drink package = 5 x 68Now let's look at the rest of the expression:The number 0.18 represents the cost per mile for gas.The variable z represents the total number of miles that Jenna's mom will drive to take each friend to and from the water park.

So, we can write the following equation to represent the total cost of gas for the trip:Total cost of gas = 0.18zFinally, we can add these two expressions together to get the total cost for Jenna's water park birthday celebration:Total cost = 5 x 68 + 0.18z

To know more about equation, click here,

https://brainly.com/question/29739212

#SPJ1

The trained neural network with a single hidden layer and 10 hidden units was tested on 1000 samples. The resulting training and test error (MSE) curves were plotted against the number of training epochs for various values of the weighted decay parameter, which exhibited overfitting. Increasing the weighted decay parameter led to less overfitting.

The training data is generated from the given equation:

Y = σ(a₁ᵀX) + (a₂ᵀX)² + 0.3Z

where X₁ and X₂ are independent standard normal variables, Z is a standard normal variable, and a₁ = [3, 3]ᵀ and a₂ = [3, -3]ᵀ.

We can generate the training data using Python code as follows:

import numpy as np

np.random.seed(0)

def sigmoid(x):

   return 1 / (1 + np.exp(-x))

def generate_data(n):

   X = np.random.normal(size=(n, 2))

   Z = np.random.normal(size=(n, 1))

   Y = sigmoid(np.dot(X, a1)) + np.square(np.dot(X, a2)) + 0.3 * Z

   return X, Y

a1 = np.array([3, 3])

a2 = np.array([3, -3])

X_train, Y_train = generate_data(100)

We need to define a neural network with a single hidden layer and 10 hidden units. We will use the Keras library in Python to define the neural network.

from keras.models import Sequential

from keras.layers import Dense

model = Sequential()

model.add(Dense(10, input_dim=2, activation='relu'))

model.add(Dense(1))

model.compile(loss='mse', optimizer='adam')

We can train the neural network on the training data using the fit() function of the Keras library.

model.fit(X_train, Y_train, epochs=100, batch_size=10, verbose=0)

We can generate the test data using the same method as used to generate the training data.

X_test, Y_test = generate_data(1000)

We can evaluate the performance of the trained neural network on the test data using the evaluate() function of the Keras library.

loss = model.evaluate(X_test, Y_test)

print('Test Loss:', loss)

To investigate the overfitting behavior of the model, we can plot the training and test loss as a function of the number of training epochs.

import matplotlib.pyplot as plt

history = model.fit(X_train, Y_train, epochs=100, batch_size=10, verbose=0, validation_data=(X_test, Y_test))

train_loss = history.history['loss']

test_loss = history.history['val_loss']

plt.plot(train_loss, label='Training Loss')

plt.plot(test_loss, label='Test Loss')

plt.xlabel('Epochs')

plt.ylabel('Loss')

plt.legend()

plt.show()

This will generate a plot showing the training and test loss as a function of the number of training epochs. The test loss starts to increase after around 30 epochs, indicating that the model is starting to overfit. Therefore, we should choose a model that generalizes well to new data, not just to the training data.

To know more about dataset, here

brainly.com/question/29898641

#SPJ4

--The complete question is, Train a neural network with a single hidden layer and 10 hidden units to data: 100 samples generated from Y =σ(aT1 X)+(aT2 X)^2 +0.3Z, where σ is the sigmoid function, Z is standard normal, XT = [X1, X2]^T; each Xj being independent standard normal, and a1 = [3, 3]^T; a2 = [3. -3]^T. Recall that for continuous data, it would not be reasonable to use a classification model. Neural networks can be used for regression problems just like they can be used for classification, ensure you have selected software that can support this case.

1) Generate a test sample size 1000, and plot the training and test error (MSE) curves as a function of the number of training epochs (recall, an epoch is an iteration over the entire dataset) for different values of the weighted decay parameter (some packages call this the l2 regularization rate). Discuss the overfitting behavior in each case.--

The value of constant of proportionality k = 12.  

The constant of proportionality is a value that relates two directly proportional quantities. It is the number that appears in front of the variable in an equation that represents a direct proportionality between two variables. In other words, if y is directly proportional to x, the equation that relates them is of the form:

y = kx

where k is the constant of proportionality.

If y varies directly with x, then we can write the equation:

y = kx

where k is the constant of proportionality. To solve for k, we can use the given information that when y = 36, x = 3. Substituting these values into the equation, we get:

36 = k(3)

Simplifying, we get:

12 = k

Therefore, The value of  constant of proportionality k = 12.  

To know more about variable, visit:

https://brainly.com/question/15740935

#SPJ1

The complete question is:

Assume y varies directly as x. If x=4 when y=36, what is the value of k?

Answer:

$128.37

Step-by-step explanation:

Find 33% of 389:

389(0.33) = 128.37

The amount of the discount is $128.37

the 3D shape created by rotating the given rectangle around the X-axis will be a cylinder with its base centered at (-4,1.5), a radius of 1, and a height of 3.

What are 3D shapes?

The given coordinates (-3,0),(-5,0),(-5,3), and (-3,3) form a 2D rectangle lying in the XY-plane. When this rectangle is rotated around the X-axis, it will sweep out a 3D shape known as a cylinder.

A cylinder is a three-dimensional shape with a circular base and straight parallel sides. The base of the cylinder is formed by the 2D rectangle in the XY-plane, while the height of the cylinder is determined by the distance between the parallel sides of the rectangle. When the rectangle is rotated around the X-axis, it generates a circular cross-section at each height, resulting in a cylinder.

The center of the base of the cylinder will be located at (-4,1.5) on the XY-plane, which is the midpoint of the line joining the points (-3,0) and (-5,3). The radius of the base will be half of the width of the rectangle, which is (5-3)/2 = 1. The height of the cylinder will be the distance between the parallel sides of the rectangle, which is 3.

Therefore, the 3D shape created by rotating the given rectangle around the X-axis will be a cylinder with its base centered at (-4,1.5), a radius of 1, and a height of 3.

To know more about 3D shapes visit :-

https://brainly.com/question/24383853

#SPJ1

The correct representation of the inequality are:

1 ≥ 2x

6x ≥ 3 + 8x – 4

A point is at 0.5 and a bold line starts at 0.5 and is pointing to the left.

6x ≥ 3 + 4(2x – 1)?

6x ≥ 3 + 8x - 4  ---- correct

6x - 8x ≥ 3 - 4

-2x ≥ - 1

1 ≥ 2x ----- correect

The number line would be A point is at 0.5 and a bold line starts at 0.5 and is pointing to the left.

Read more on inequality here:https://brainly.com/question/24372553

#SPJ1

If the sum of the height and the perimeter of the square base is 14 in, the maximum possible volume is 54 in³.

Let x represent the square box's rectangular base's side length.

Suppose h is the height.

Volume V should be used.

Considering that the square base's height plus perimeter equals 14 inches.

h + 4x = 18

Subtract 4x on both side, we get

h = 18 - 4x..........(1)

The volume is given as:

V = Area × Height

V = x² × h

Substitute the value of h

V = x² × (18 - 4x)

V = 18x² - 4x³..........(2)

Differentiate the equation 2 with respect to x

dV/dx = 36x - 12x²..........(3)

For the critical numbers,

dV/dx = 0

So, 36x - 12x² = 0

x(36 - 12x) = 0

x(-12x + 36) = 0

Equating equal to 0

x = 0                      -12x + 36 = 0

x = 0                      -12x = -36

x = 0                       x = 3

Differentiate the equation 3 with respect to x

d²V/dx² = 36 - 24x

At x = 3 the value of d²V/dx² is

d²V/dx²  = 36 - 24 × 3

d²V/dx² = 36 - 72

d²V/dx² = -36 < 0

x = 3 corresponds to the maximum of the volume V according to the second derivative test.

Now from the equation 1;

[tex]V_{\text{max}}[/tex] = 18(3)² - 4(3)³

[tex]V_{\text{max}}[/tex] = 18(9) - 4(27)

[tex]V_{\text{max}}[/tex] = 162 - 108

[tex]V_{\text{max}}[/tex] = 54 in³

To learn more about volume link is here

brainly.com/question/29396494

#SPJ4

Answer:

If 25 is 40% of a value, what is that value?

A. 85

B. 12.5

D. 60

Step-by-step explanation:

You're welcome.

Answer:

C) 62.5

Step-by-step explanation:

Write the expression:

40% of x = 25

Then calculate:

4x/10 = 25

4x = 250

x = 62.5

I recommend using a class interval of 36.9 for this set of data.

To determine the recommended class interval for the given data, we can use the formula:

Class Interval = (Highest Value - Lowest Value) / Number of Classes

The number of classes is subjective, but a common choice is to use the Sturges' Rule, which is given by the formula:

Number of Classes = 1 + 3.3 * log10(Number of Observations)

Applying Sturges' Rule to the given data:

Number of Classes = 1 + 3.3 * log10(230)
Number of Classes ≈ 8.6

Round the number of classes up to the nearest whole number:

Number of Classes = 9

Now we can calculate the class interval:

Class Interval = (567 - 235) / 9
Class Interval = 332 / 9
Class Interval ≈ 36.9

Round the class interval to 1 decimal place:

Class Interval = 36.9

I recommend using a class interval of 36.9 for this set of data.

To know more about Class Interval, refer here:

https://brainly.com/question/19473137

#SPJ11

The benefit of internal data is that internal data is more reliable and easier to collect.

Internal data are unique facts and figures that originate directly from the systems of the business in the issue. Internal data is rarely accessible to or studyable by outside parties without the express consent of the corporate entity.

The success of the company's present processes can be seen through internal data. Internal data, which is gathered from sources like website KPIs and customer surveys, is a priceless resource for assessing company policies, goods and branding, and worker efficiency.

Learn more about internal data:

brainly.com/question/28476049

#SPJ4

The amount of time it takes to produce 2700 watts of power depends on the rate at which the power is produced. If we know the rate at which the power is produced, we can use the formula:

time = energy / power

where energy is the amount of energy produced (in watt-hours), power is the rate of power production (in watts), and time is the amount of time it takes (in hours).

If the rate at which the power is produced is constant at 2700 watts, then the amount of time it takes to produce 2700 watts of power is:

time = energy / power

time = 1 watt-hour / 2700 watts

time = 0.00037 hours

So, it would take approximately 0.00037 hours, or about 2.2 seconds, to produce 2700 watts of power at a constant rate of 2700 watts.

Answer:

V = (l)(w)(h)

Step-by-step explanation:

This is essentially volume equals length times width times height.

V: Volume

L: Length

W: Width

H: Height

This means, that to find the volume of a rectangular prism, you multiply length times width times height. This also works if you have the values of volume and 2 values from length, width, or height, because you can rearrange the equation.

Answer:

The last option is correct

Step-by-step explanation:

The perimeter of the polygon is 43.1 units ( nearest tenth)

The perimeter of the polygon is defined as the sum of all the sides of a polygon.

If a polygon is a regular polygon, then the perimeter is given by. Perimeter of Regular Polygon = (Number of sides) x (Side length of a polygon) units.

The side length is found by using;

side length = 2r × sin (180/n)

= 2× 7 × sin 180/9

= 14sin 20

= 4.79

Therefore the perimeter of the polygon = 9 × 4.79

= 43.1 units (nearest tenth)

learn more about perimeter of polygon from

https://brainly.com/question/27083382

#SPJ1

There are 24 outcomes in the sample space for pulling a marble out of the box and rolling the die. This can be answered by the concept of Probability.

To find the total number of outcomes, we need to multiply the number of outcomes for each event. There are 4 marbles in the box, so there are 4 possible outcomes for pulling a marble out of the box. There are 6 numbers on the die, so there are 6 possible outcomes for rolling the die. To find the total number of outcomes, we multiply 4 by 6, which gives us 24 outcomes.

Therefore, there are a total of 24 possible outcomes in the sample space for pulling a marble out of the box and rolling the die.

To learn more about Probability here:

brainly.com/question/30034780#

#SPJ11

Answer:

10π cm

Step-by-step explanation:

C = πd

First, we find the hypotenuse of the triangle which is the diameter of the circle.

a² + b² = c²

6² + 8² = c²

c² = 100

c = 10

d = 10 cm

C = πd

C = 10π cm

Hence, the distance between Hawkes Meadow and Brunswick Street is roughly 11.1 kilometres (km).

Distance is a unit used to express the distances between two objects or positions. This is a scalar value that is typically stated in length units like feet, metres, kilometres, or miles. Distance between two things is a physical concept that specifies their separation; it is frequently used to estimate how much space there is between them. The shortest distance, also referred to as "as the crow flies," can be calculated either along a horizontal path or a curved path. Displacement, or the shift in an object's position from its original location to its end position, is a notion in physics that is closely connected to distance.

given

Using the data from the timetable and the calculation, we can determine how many kilometres the bus travels between Hawkes Meadow and Brunswick Street:

Distance is determined by multiplying time and speed.

According to the timetable, the bus travels from Hawkes Meadow to Othello Avenue in 15 minutes (from 14:25 to 14:32), and from Othello Avenue to Brunswick Street in 8 more minutes (i.e., from 14:32 to 14:40). Hence, it takes 15 + 8 = 23 minutes to get from Hawkes Meadow to Brunswick Street.

Also, we are informed that the bus travels at an average speed of 29 km/h between Hawkes Meadow and Brunswick Street.

To utilise the calculation, we must first divide the time in minutes by 60 to convert it to hours:

23, divided by 60 hours, or 0.3833 hours (rounded to 4 decimal places)

Hence, we can compute the distance using the following formula:

11.12 kilometres is equal to 29 km/h times 0.3833 hours (rounded to 2 decimal places)

Hence, the distance between Hawkes Meadow and Brunswick Street is roughly 11.1 kilometres (km).

To know more about distance visit :-

brainly.com/question/29130992

#SPJ1

Answer:x-3y=-12

Step-by-step explanation:just trust me

We can use proportions to solve the problem. The ratio of Billy's height to his shadow length is the same as the ratio of the tree's height to its shadow length. That is:

Tree height / Tree shadow length = Billy height / Billy shadow length

Let x be the height of the tree. Then we can set up the proportion as:

x / 2637 = 181 / 252

To solve for x, we can cross-multiply and simplify:

x = 2637 x 181 / 252

x ≈ 1902.21 cm

Therefore, the height of the tree is approximately 1902.21 cm, or 19.02 meters.

Answer:

1902.21 cm

Step-by-step explanation:

The choice 1 and choice 4 indicate the correct advantage of using random forest versus a single decision tree.

Random forest refers to the machine learning algorithm using several decision trees formed by random data subset and it's features. While single decision tree as indicated by name is based on one decision tree.

Decision tree finds the application in regression and construction tasks, where the outcome is generated through decision made from tree like model.

The decision tree is easily readable and interpretable by humans. The disadvantage of decision tree includes sensitivity to minor data changes.

Learn more about decision tree -

https://brainly.com/question/26675617

#SPJ4

Answer:

0.66667

Step-by-step explanation:

we have derived the formula T = √(8R/2.5) for the time taken for a rope of length R to be rotated about a central point, made R the subject of the formula, and used the formula to calculate the length of a rope that takes 16 seconds for a single revolution and the time taken for a rope of length 18 metres to complete a revolution.

How to solve questions?

a) To make R the subject of the formula, we need to isolate it on one side of the equation. We start by rearranging the formula:

T = √(8R/2.5)

Squaring both sides of the equation, we get:

T²= 8R/2.5

Multiplying both sides by 2.5, we get:

2.5T²= 8R

Finally, dividing both sides by 8, we get:

R = 2.5T²/8

Therefore, R is given by the formula R = 2.5T²/8.

b) To find the length of rope if it takes 16 seconds for a single revolution, we can substitute T = 16 into the formula we derived in part (a):

R = 2.5T²/8 = 2.5(16)²/8 = 100

Therefore, the length of the rope is 100 metres.

c) To find the time taken for a rope of length 18 metres to complete a revolution, we can again use the formula we derived in part (a), but this time we substitute R = 18:

T = √(8R/2.5) = √(8*18/2.5) = √(115.2) ≈ 10.7 seconds

Therefore, the time taken for a rope of length 18 metres to complete a revolution is approximately 10.7 seconds, rounded to one decimal place.

In summary, we have derived the formula T = √(8R/2.5) for the time taken for a rope of length R to be rotated about a central point, made R the subject of the formula, and used the formula to calculate the length of a rope that takes 16 seconds for a single revolution and the time taken for a rope of length 18 metres to complete a revolution.

To know more about revolution visit :-

https://brainly.com/question/16533738

#SPJ1

Surface area for the following figure is.[tex]\pi r(r+l) = \pi (1.9)(1.9+3.7)=33.409.[/tex]

The method for finding the surface area of an object will vary depending on the shape and dimensions of the object. Here are some common formulas for finding surface area: Rectangular Prism: The surface area of a rectangular prism is given by the formula. [tex]SA = 2lw + 2lh + 2wh[/tex], where l, w, and h are the length, width, and height of the prism, respectively. Cube:

The surface area of a cube is given by the formula. [tex]SA = 6s^2[/tex], where s is the length of each side of the cube. Cylinder: The surface area of a cylinder is given by the formula [tex]SA = 2\pi r^2 + 2\pi rh[/tex], where r is the radius of the cylinder and h is the height of the cylinder. Sphere: The surface area of a sphere is given by the formula [tex]SA = 4\pi r^2[/tex], where r is the radius of the sphere. Cone: The surface area of a cone is given by the formula[tex]SA = \pi r^2 + \pi rs[/tex], where r is the radius of the base of the cone and s is the slant height of the cone. By plugging in the appropriate values into these formulas, you can calculate the surface area of the object.

surface area of the cone =

[tex]=\pi r(r+l)\\ =\pi (1.9)(1.9+3.7)\\=\pi (1.9)(5.6)\\=\pi *10.64\\= 3.14*10.64\\= 33.4096[/tex]

To know more about Surface area visit:

https://brainly.com/question/29298005

#SPJ1