0 million KOO and Hugo's canned products to be recalled Tiger Brands, South Africa's biggest food manufacturer, announced on Monday, the 26 of July 2021 that it is immediately recalling about 20 million KOO and Hugo's canned vegetable products over safety concerns due to potentially defective cans. This amounts to a recall of 9% of annual production and the final impact is estimated to amount to up to R650 million. Tiger Brand's share price initially dropped 6.40% after the announcement on Monday morning. The issue with the cans, which is a deficient side seam weld that could cause the cans to leak, was initially discovered in May this year with 18 cans at one of Tiger Brand's facilities. The cans came from a supplier. While that batch and several others weren't released for trade, a probe determined that some cans from a defective batch did. It did a test and out of 287,040 cans inspected after a transport and handling test, a side seam leak had developed in two cans. This prompted the recall. "A leak in a can presents a risk of secondary microbial contamination after the canned products are dispatched into the marketplace. Where such contamination occurs, it will present a low probability of illness and injury if the contaminated product is consumed," Tiger Brands said in an announcement. "Tiger Brands considers it appropriate that it institutes an immediate recall of all products that could potentially be affected. This involves the withdrawal of specific canned vegetable products manufactured under the KOO and Hugo’s brands between 1 May 2019 and 5 May 2021(both dates inclusive), amounting to approximately 20 million cans, which is [approximately] 9% of annual production. "The financial impact of the recall, including the cost of the potentially affected stock that may be written off, transport and storage costs, as well as the loss of margin on the returned stock, is estimated at between R500 million and R650 million." KOO canned fruit and KOO canned pilchards are not affected. Affected canned vegetable products can be returned to any supermarket or wholesale outlet for a refund. Tiger Brands said it has product recall insurance. "The company’s claim under the contract with the third-party supplier is yet to be assessed."
question 5
Based on the above article, fully discuss the principles for integrated Supply Chain Risk Management (SCRM) using relevant examples from Tiger Brands.Based on the above article, fully discuss the principles for integrated Supply Chain Risk Management (SCRM) using relevant examples from Tiger Brands.

Answers

Answer 1

Integrated Supply Chain Risk Management (SCRM) principles include mitigating, identifying, and responding to risks. According to the article, Tiger Brands, South Africa's largest food producer, has recalled 20 million .

This indicates that there were supply chain risks involved in the manufacture of the cans.The following are principles for Integrated Supply Chain Risk Management (SCRM) using relevant examples from Tiger Brands:Mitigation of risks: Mitigating risk is one of the most important principles of SCRM. This is done by anticipating, recognizing, and minimizing the negative consequences of a potential event.

After discovering that some cans from the faulty batch had been released for sale, Tiger Brands immediately initiated a recall of all cans that may be potentially affected. This was done in order to reduce the risk of secondary microbial contamination in the marketplace. The company stated that affected canned vegetable products could be returned to any supermarket or wholesale outlet for a refund. Additionally, they had product recall insurance. As a result, they could be able to recoup some of the costs incurred.

To know more about producer visit:

https://brainly.com/question/30141735

#SPJ11


Related Questions

Write two or three pages about the different aspects of Investment standard

Answers

Investment standard is a financial term that defines the established principles that investment advisors use to select, invest and monitor the securities they purchase for their clients.

The underlying purpose of these standards is to ensure that investment advisors act in the best interests of their clients. Investment advisors are responsible for following the standards of the investment advisory profession. These standards are established by various organizations and regulators that oversee the investment industry.

These standards apply to all investment advisors, regardless of the type of investment products they recommend. They are designed to protect clients from unscrupulous advisors who might recommend investments that are not appropriate for their clients. Investment advisors must follow these standards or risk losing their licenses to practice.

To know more about Investment visit:

https://brainly.com/question/17252319

#SPJ11

Dividing GDP by the total population of a country results in that country's
A) personal income per capita
B) gross GDP rate
C) GDP per capita.
D) unemployment rate.

Answers

Answer:

C) GDP per capita.

Explanation:

Dividing the Gross Domestic Product (GDP) by the total population of a country gives the GDP per capita. GDP per capita is a measure that represents the average economic output per person in a country. It provides an indication of the economic well-being and standard of living of the population. By dividing the total economic output (GDP) by the population, we can determine the average share of GDP that each individual would receive if it were evenly distributed.

Final answer:

GDP divided by total population yields the GDP per capita, an average measure of each individual's contribution to the country's economy.

Explanation:

Dividing Gross Domestic Product (GDP) by the total population results in a country's GDP per capita. GDP per capita is a measurement of a country's economic output that accounts for the number of people it has. It's essentially the average economic productivity of each individual in a country. It's important to note that the GDP per capita doesn't measure the wealth distribution within a country or income inequality, it only measures the average income.

Learn more about GDP per capita here:

https://brainly.com/question/34195435

#SPJ12

A person whose business depends on their own established business is called______
A) Intrapreneur
B) Ultrapreneur
C) Entrepreneur
D) None

Answers

A person whose business depends on their own established business is called an entrepreneur.

An entrepreneur is a person who starts or operates a new business venture and assumes some degree of financial risk in doing so. Entrepreneurs often have an inventive mind and use their creativity to develop new products or services to meet customer needs.

They must be willing to take on financial risk, invest time and effort, and often work long hours to establish a successful business. Being an entrepreneur can be a rewarding experience for those who have a passion for their work and are willing to put in the effort to succeed. However, it can also be a challenging and stressful path that requires careful planning, hard work, and the ability to adapt to changing circumstances in the business world.

In order to be a successful entrepreneur, it is important to have a strong understanding of business management, marketing, finance, and other key areas that are essential for running a successful business.

Entrepreneurship is essential for the growth of the economy and job creation. It plays a vital role in the development of new ideas, products, and services that help to improve people's lives.

In many countries, governments are actively supporting entrepreneurship by offering grants, subsidies, tax breaks, and other incentives to help start-up companies get off the ground.

Learn more about entrepreneur from the given link:

https://brainly.com/question/353543

#SPJ11

Ms. Frangipani prefers Pepsi over Coke on a rainy day; Coke over Pepsi on a sunny one. On one sunny day at the CNN center in Atlanta, when faced with a choice between Pepsi, Coke and Lipton iced tea, she decides to have a Pepsi. Should the presence of iced teas in the basket of choices affect her decision? Does she violate principles of utility maximization? If yes, which assumptions does she violate? If not, then argue how her choices are consistent with the utility theory

Answers

While her decision may not strictly adhere to utility maximization, it remains consistent with the overall framework of utility theory.

According to the principle of utility maximization, individuals choose the option that provides them with the highest level of satisfaction or utility. In the case of Ms. Frangipani, her choice of drinks is influenced by the weather. Specifically, she prefers Pepsi on rainy days and Coke on sunny days.

When faced with three options (Pepsi, Coke, and Lipton iced tea) on a sunny day, Ms. Frangipani chose Pepsi. The presence of iced teas in the choices should not affect her decision because she already knows her preference and what brings her enjoyment.

However, Ms. Frangipani violates the principle of utility maximization by choosing Pepsi over Coke on a sunny day. According to utility maximization, she should select the option that provides her with the maximum satisfaction or utility. If she indeed prefers Coke on sunny days, she should choose Coke over Pepsi, even if she generally likes Pepsi more.

Nevertheless, despite violating the principle of utility maximization, Ms. Frangipani's choices are consistent with the utility theory. She is still maximizing her satisfaction or utility based on her established preferences. Her choices align with her subjective preferences, which may be influenced by factors such as personal taste or associations with certain drinks on specific weather days.

Therefore, while her decision may not strictly adhere to utility maximization, it remains consistent with the overall framework of utility theory.

Learn more about utility maximization

https://brainly.com/question/32296953

#SPJ11

When the Fed makes an open-market sale, it: a. increases the currency-deposit ratio (cr). b. decreases the monetary base (B). c. increases the monetary base (B). d. increases the moncy multiplier (m). QUESTION 9 If the real return on government bonds is 3 percent and the expected rate of inflation is 4 percuition a. 7 b. 4 c. 1 d. 3

Answers

The correct answer to the first question is (b) decreases the monetary base (B). When the Fed makes an open-market sale, it decreases the monetary base (B). Open market operations entail the purchase or sale of government bonds to or from banks and the general public by the Federal Reserve.

A bond is a financial instrument that enables companies, municipalities, and governments to borrow money to finance their operations. The issuer of the bond receives money in exchange for a promise to repay the bond's face value at maturity, as well as a stream of interest payments over the bond's life. The real return on government bonds can be calculated by deducting the inflation rate from the nominal interest rate.The nominal rate is the stated or advertised rate, while the inflation rate reflects the change in prices over time. The actual return on an investment might differ from the nominal rate if inflation affects the investment's value. This distinction is critical because inflation has an effect on a bond's value. Inflation devalues the future payments that a bond makes, lowering its market price.

Consequently, the real return of government bonds = Nominal return – Inflation rate= 3 percent - 4 percent= -1 percent. The correct option is (c) 1.

To know more about government visit:

https://brainly.com/question/4160287

#SPJ11

Current Attempt in Progress If the initial price of a share was incorrectly reported, and later determined to be higher than originally reported, what would h to the total return, assuming cash flows and/or the final price of the share remain the same? O It would stay the same. O It would be indeterminable. O It would increase. O It would decrease.

Answers

If the initial price of a share was incorrectly reported and later determined to be higher than originally reported, the total return would decrease, assuming the cash flows and/or the final price of the share remain the same. Here option D is the correct answer.

If the initial price of a share was incorrectly reported and later determined to be higher than originally reported, the total return would decrease, assuming the cash flows and/or the final price of the share remain the same.

The total return is calculated by considering the change in the price of the share and any dividends or other cash flows received during the investment period. When the initial price is incorrectly reported and later found to be higher, it means that the actual price at which the share was acquired was higher than initially believed.

To calculate the total return, the initial price is subtracted from the final price, and any dividends or cash flows received are added. If the initial price is higher, it would result in a smaller price difference when subtracted from the final price, leading to a lower total return. Therefore option D is the correct answer.

To learn more about the initial price

https://brainly.com/question/30165908

#SPJ11

Complete question:

Current Attempt in Progress If the initial price of a share was incorrectly reported, and later determined to be higher than originally reported, what would h to the total return, assuming cash flows and/or the final price of the share remain the same?

A - It would stay the same.

B - It would be indeterminable.

C - It would increase.

D - It would decrease.

At least one of the answers above is NOT correct. Let f(x)=4−(2x 2
+3x) a. Compute f(3) f(3)= b. Simplify the following expression completely f(x+3) f(x+3)= c. Simplify the following expression completely f(x+3)−f(3). f(x+3)−f(3)= d. Simplify the following expression completely x
f(x+3)−f(3)

. x
f(x+3)−f(3)

= Note: You can earn partial credit on this problem.

Answers

a. The value of f(3) can be calculated by substituting the value of x = 3 in the given function. The calculation is shown below: f(x) = 4 - (2x^2 + 3x)f(3) = 4 - (2(3)^2 + 3(3)) = 4 - (2(9) + 9) = 4 - (18 + 9) = 4 - 27 = -23Therefore, f(3) = -23.

b. The function f(x+3) can be computed by replacing the variable x with (x+3) in the function expression for f(x).f(x) = 4 - (2x^2 + 3x) f(x+3) = 4 - (2(x+3)^2 + 3(x+3))f(x+3) = 4 - (2(x^2 + 6x + 9) + 3x + 9)f(x+3) = 4 - (2x^2 + 12x + 18 + 3x + 9)f(x+3) = 4 - (2x^2 + 15x + 27)Therefore, f(x+3) = -2x^2 + 15x - 23.

c. We can simplify the given expression by using the function expression computed above. f(x+3) - f(3) = (-2x^2 + 15x - 23) - (-23) = -2x^2 + 15xTherefore, f(x+3) - f(3) = -2x^2 + 15x.

d. We can simplify the given expression using the previously computed function expressions. x[f(x+3) - f(3)] = x(-2x^2 + 15x) = -2x^3 + 15x^2Therefore, x[f(x+3) - f(3)] = -2x^3 + 15x^2.

To know more about substituting the value refer here : brainly.com/question/31009321

#SPJ11

Define the minimum viable business product for a technology-based platform solution that lets university students in Bangladesh borrow from and lend to each other (peer-to-peer lending business model).

Answers

The Minimum Viable Business Product for a technology-based platform solution that allows University students in Bangladesh to borrow from and lend to each other in a Peer-to-Peer (P2P) lending business model must be formulated in a way that addresses the unique needs of the target audience.

This means that the product must be carefully tailored to the needs of students in the University, taking into consideration factors such as the current economic situation, financial literacy, technological awareness, and competition from existing P2P lending solutions.

The minimum viable product (MVP) for this technology-based platform solution should have the following features:

1. User-Friendly: The platform must be simple and intuitive to use, so that students can easily navigate through the platform and understand how it works. This means that the user interface must be visually appealing, easy to understand and the processes involved must be simple.

2. Secure: Security is of utmost importance in any P2P lending platform. The platform must be designed with a robust security system that protects the users' personal and financial data from being compromised.

3. Affordable: The platform must be affordable to use, with reasonable fees that are competitive compared to other P2P lending platforms.

4. Efficient: The platform must have a seamless, fast and efficient transaction process that ensures borrowers and lenders receive funds on time, with no unnecessary delays.

By taking into consideration the unique needs of the students in the University, the platform can be designed to meet their needs, and provide them with a secure, affordable, and efficient P2P lending solution.

To know more about Peer-to-Peer visit :

https://brainly.com/question/28936144

#SPJ11

After examining years of data on hundreds of US equities, you discover the following relationship between the annual returns of 3 stocks, A,B, and C : RA​=21​RB​+43​RC​−2001​. What should the effective annual risk-free interest rate be? Why? (Hint: Find a risk-free portfolio of A,B, and C.) (b) (5 points) Let R1​ and R2​ be the annual return of two equities, and let μ1​,μ2​,σ12​ and σ22​ be the mean and variance of the returns. Find a relationship between R1​ and R2​ if the returns are perfectly correlated. Determine the annual risk-free interest rate. (Hint: Recall that two random variables R1​ and R2​ are perfectly correlated if and only if R1​=a×R2​+b, for some constants a>0 and b.)

Answers

To find the effective annual risk-free interest rate, we need to construct a risk-free portfolio of A, B, and C. Since we know the relationship between the returns of the three stocks, we can write the return of any portfolio as follows:Rp=wARa​+wBRb​+wCRc​where wA​,wB​, and wC​ are the weights of A, B, and C, respectively.

To make this portfolio risk-free, we need to find weights that will eliminate all the risky components. We can do this by setting the coefficients of RB​ and RC​ to zero and solving for wA​. This gives us:[tex]

wA​=0.43/(0.21+0.43)=0.671wB​=0.21/(0.21+0.43)=0.329wC​=0[/tex]

Therefore, a risk-free portfolio is one that consists of 67.1% of stock A and 32.9% of stock B. The effective annual risk-free interest rate is the interest rate that would be earned on such a portfolio, which we can calculate using the following formula:[tex]

Rf​=Ra​wA​+Rb​wB​+Rc​wC​=0.21(0.671)+0.43(0.329)=0.295 or 29.5%.[/tex]

Therefore, the effective annual risk-free interest rate should be 29.5%.Why? Because this is the interest rate that would be earned on a portfolio that eliminates all the risky components and consists of only stocks A and B. The weights of this portfolio are such that the returns of stocks B and C are completely eliminated, leaving only the return of stock A, which is risk-free.

To know more about respectively visit:

brainly.com/question/24282003

#SPJ11

In the quarterly report for the quarter ended on July 29, 2022 (total working days 65 days), the following are from the Dell Computer's financial report (in millions) for products (not including services):
Net revenue (products) $ 20,810
Cost of net revenue (products) 17,671
Accounts receivable 13,431
Accounts payable 25,339
Inventory 5,883
Calculate the cash-to-cash cycle time for Dell.

Answers

The cash-to-cash cycle time will be approximately -29.68 days.

To calculate the cash-to-cash cycle time for Dell, we need to consider the following components:

Days Inventory Outstanding (DIO): This represents the average number of days it takes for Dell to sell its inventory.

DIO = (Inventory / Cost of Net Revenue) × Number of Days in the Quarter

DIO = (5,883 / 17,671) ×× 65 = 21.62 days

Days Sales Outstanding (DSO): This represents the average number of days it takes for Dell to collect payment from its customers.

DSO = (Accounts Receivable / Net Revenue) × Number of Days in the Quarter

DSO = (13,431 / 20,810) × 65 = 41.95 days

Days Payable Outstanding (DPO): This represents the average number of days it takes for Dell to pay its suppliers.

DPO = (Accounts Payable / Cost of Net Revenue) × Number of Days in the Quarter

DPO = (25,339 / 17,671) × 65 = 93.25 days

Now, we can calculate the cash-to-cash cycle time using the formula:

Cash-to-Cash Cycle Time = DIO + DSO - DPO

Cash-to-Cash Cycle Time = 21.62 + 41.95 - 93.25

= -29.68 days

The negative result indicates that Dell's cash inflows (from collecting accounts receivable) occur before its cash outflows (to pay accounts payable and purchase inventory), resulting in a negative cash cycle time.

To know more about cash inflows here

https://brainly.com/question/10714011

#SPJ4

1. Identify three of the six stages that should be targeted as part of a new product launch ( it could be any type of product so long as it is newly in the market). Further explain your choices.

Answers

When launching a new product into the market, six stages should be targeted. These six stages include the ideation phase, research and development, testing and validation, production and manufacturing, launch and promotion, and finally, growth and expansion.

Three of these stages that should be targeted as part of a new product launch include ideation, testing and validation, and launch and promotion.

Ideation is the first stage that should be targeted when launching a new product. During this phase, a company can generate a lot of creative and innovative ideas for their product. The ideation phase includes brainstorming and market research to gather information about the target audience, their needs, and preferences.


Testing and validation is the next stage that should be targeted in the new product launch. In this stage, the company can create prototypes of the product to test it in the real world. The company can also test the product with potential customers to gather feedback and identify areas for improvement.

The launch and promotion stage is another important stage that should be targeted in the new product launch. In this stage, the company can develop a marketing plan that includes advertising and promotions to introduce the product to the market.


In conclusion, when launching a new product into the market, it is essential to target specific stages that can make the product more successful. Ideation, testing and validation, and launch and promotion are three of the six stages that should be targeted in the new product launch.

To know more about development visit ;

https://brainly.com/question/29659448

#SPJ11

TRUE / FALSE. The average inventory level is inversely related to order size

Answers

Answer:

False.

Explanation:

The average inventory level and order size are not always inversely related. It depends on factors like demand patterns, lead time, and replenishment policies. A larger order size can increase average inventory when demand is stable, reducing stockouts. However, in unpredictable or fluctuating demand, larger orders can lead to lower inventory levels. Thus, the relationship is context-dependent, not strictly inverse.

Problem 5-9 Calculating Annuity Values [LO 1] Assume you deposit $4,500 at the end of each year into an account paying 10.75 percent interest. a. How much money will you have in the account in 25 years? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b. How much will you have if you make deposits for 50 years? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.

Answers

Future value of annuity in 25 years is $340,269.25. Future value of annuity in 50 years is $2,533,617.39.

Problem 5-9 Calculating Annuity Values [LO 1]

The given details are:Amount Deposited at the end of every year = $4,500

Interest rate = 10.75%

a. How much money will you have in the account in 25 years?

Let's first find the Future value of annuity in 25 years.

Future value = Payment * [(1 + i)n - 1] / i

where,

P = $4,500

i = 10.75% / 100

= 0.1075

n = 25 years

Therefore, the Future value of annuity in 25 years = $340,269.25

b. How much will you have if you make deposits for 50 years?

Let's first find the Future value of annuity in 50 years.

Future value = Payment * [(1 + i)n - 1] / i

where,

P = $4,500

i = 10.75% / 100

= 0.1075

n = 50 years

Therefore, the Future value of annuity in 50 years = $2,533,617.39

Know more about the Future value

https://brainly.com/question/27979326

#SPJ11

In their meeting with their advisor, Mr. and Mrs. O'Rourke concluded that they would need $60,000 per year during their retirement years in order to live comfortably. They will retire 10 years from now and expect a 15-year retirement period. How much should Mr. and Mrs. O'Rourke deposit now in a bank account paying 8 percent to reach financial happiness during retirement? Assume that once they retire, the O'Rourkes will withdraw $60,000 from their retirement account at the end of each year. A) $513,568.72 B) $186,140.94 C) $365,145.83 D) $365,148.72

Answers

The amount that Mr. and Mrs. O'Rourke need to deposit now in order to reach their retirement goal can be calculated using the formula for the present value of an ordinary annuity.

The formula is given by:

PV = PMT × ((1 - (1 + r)^-n) / r)

Where PV is the present value (the amount to be deposited now), PMT is the annual withdrawal amount during retirement ($60,000), r is the interest rate (8% or 0.08), and n is the number of years in retirement (15).

Plugging in the values into the formula, we get:

PV = $60,000 × ((1 - (1 + 0.08)^-15) / 0.08)

Calculating this expression yields:

PV ≈ $365,148.72

Therefore, the amount that Mr. and Mrs. O'Rourke should deposit now in the bank account is approximately $365,148.72.

The correct answer is D) $365,148.72.

To know more about retirement, visit;

https://brainly.com/question/28128413

#SPJ11

A financial reporter commenting on benchmark rates stated that: "the risk-free LIBOR will be abolished and replaced by risk-free OIS rates." Critique the reporter’s statement.
Could everyone do this and write a paragraph with citation and references.

Answers


The critique of the reporter's statement is that it is not entirely accurate. While it is true that the London Interbank Offered Rate (LIBOR) is being phased out, it is not accurate to say that it will be replaced by risk-free Overnight Indexed Swap (OIS) rates.

OIS rates are indeed risk-free rates, but they are not a direct replacement for LIBOR. Instead, various alternative reference rates are being developed and recommended, such as the Secured Overnight Financing Rate (SOFR) in the United States and the Sterling Overnight Index Average (SONIA) in the United Kingdom. These rates are based on actual transactions in the respective markets, making them more robust and representative of the underlying market conditions. To summarize, the reporter's statement is inaccurate as it suggests that OIS rates will directly replace LIBOR, when in fact, alternative reference rates like SOFR and SONIA are being recommended as replacements.

Learn more about the Swap (OIS) rates:

https://brainly.com/question/33495035

#SPJ11

1.Taxes can induce the optimal quantity of a good that has a negative externality
( ) True
( ) False
2. Because fans do not pay the de jure incidence of a tax on concessions, they will not be negatively effected by this tax.
( ) True
( ) False
3. Suppose the marginal propesnsity to consume is .8 and the marginal propensity to import is .2. Suppose a stadium renovation increased revenue by $6,000,000,000. What would the total benefit of this construction be for the city?
4. Suppose the marginal propesnsity to save is .1 and the marginal propensity to import is .2. Suppose a stadium renovation increased revenue by $6,000,000,000. What would the total benefit of this construction be for the city?

Answers

1. True

2. False

3. The total benefit of the stadium construction for the city would be $4,800,000,000.

4. The total benefit of the stadium construction for the city would be $600,000,000.

1. True: Taxes can be used to internalize negative externalities by increasing the cost of producing or consuming goods that generate negative spillover effects.

By raising the price of such goods, taxes can reduce their consumption and lead to the optimal quantity that accounts for the negative externality.

2. False: The incidence of a tax refers to who bears the burden of the tax. While fans may not pay the tax directly on concessions, they can still be negatively affected by it indirectly.

The tax may result in higher prices for concessions, which can impact fans' purchasing decisions and overall experience at the stadium.

3. To calculate the total benefit of the stadium renovation for the city, we need to consider the marginal propensity to consume (MPC) and the change in income.

Given:

MPC = 0.8

Change in income = $6,000,000,000

Total Benefit = MPC * Change in Income

Total Benefit = 0.8 * $6,000,000,000

Total Benefit = $4,800,000,000

Therefore, the total benefit of the construction for the city would be $4,800,000,000.

4. To calculate the total benefit of the stadium renovation for the city, we need to consider the marginal propensity to save (MPS) and the change in income.

Given:

MPS = 0.1

Change in income = $6,000,000,000

Total Benefit = MPS * Change in Income

Total Benefit = 0.1 * $6,000,000,000

Total Benefit = $600,000,000

Therefore, the total benefit of the construction for the city would be $600,000,000.

Know more about the marginal propensity to save (MPS) click here:

https://brainly.com/question/32247892

#SPJ11

You are the audit committee chair for a large construction company. A year ago you purchased a development company in Europe for approximately $100 million. This company has already lined up a number of large projects in Italy, Germany, and other European countries that take advantage of government incentives and subsidies. You just received a tip (not anonymous} from a female attorney working for the European subsidiary who alleges that the CEO of the European subsidiary is paying bribes to key governmental officials to get favorable treatment on major projects. The tip is quite specific in that it names (1) the government officials who have been paid bribes, (2) the nature of the payments (they have been labeled consulting fees but you have been told they lack any legitimate documentation), and {3) the amounts that have been paid. Answer the following questions regarding this tip.
I. Which law(s) are you concerned that the company may be violating and what are the consequences of violating this (these) law(s}?
2. As audit committee chair, what action should you take to investigate the tip?
3. If you find through whatever initiatives you take that the allegations are true, what should you do and what are the pros and cons of self-reporting of the government?

Answers

The situation raises concerns about potential violations of anti-bribery laws, particularly the FCPA. As the audit committee chair, it is crucial to initiate an investigation, gather evidence, etc.

The laws that may be of concern in this situation are the Foreign Corrupt Practices Act (FCPA) in the United States and potentially anti-bribery laws in the countries where the bribes are being paid, such as Italy and Germany. The FCPA prohibits the bribery of foreign officials for the purpose of obtaining or retaining business. Violating the FCPA can lead to severe consequences, including criminal and civil penalties for both the individuals involved and the company, such as substantial fines, imprisonment, and reputational damage.
As the audit committee chair, it is your responsibility to take the tip seriously and initiate a thorough investigation. The first step would be to gather relevant information and evidence, including any available documents or testimonies related to the alleged bribes. It would be prudent to engage a reputable external investigator or legal counsel experienced in handling such matters to ensure an impartial and comprehensive investigation.
If the investigation confirms the validity of the allegations, it is essential to take appropriate action. The pros and cons of self-reporting to the government should be carefully evaluated. Pros of self-reporting include demonstrating the company's commitment to ethical conduct, potential leniency in penalties if the company cooperates fully, and the possibility of mitigating reputational damage. Cons may include potential fines, legal proceedings, and the negative impact on the company's image and business relationships. The decision to self-report should be made after weighing the legal and ethical obligations, potential consequences, and guidance from legal counsel.

Learn more about FCPA here:

https://brainly.com/question/30626255

#SPJ11

Current Attempt in Progress This information relates to Ayayai Real Estate Agency. Oct. 1 Stockholders invest $29,100 in exchange for common stock of the corporation. 2 Hires an administrative assistant at an annual salary of $30,000. 3 Buys office furniture for $3,610, on account. 6 Sells a house and lot for E.C. Roads; commissions due from Roads, $10,000 (no foaid by Roads at this time). 10 Receives cash of $130 as commission for acting as rental agent renting an apartment. 27 Pays $600 on account for the office furniture purchased on October 3. 30 Pays the administrative assistant $2.500 in salary for October. Joumalize the transactions. (If no entry is required, select "No entry" for the eccount titles ond enter Ofor the anounts. Credit account tities are cutomatically indented when omount is entered, Do not indent manailly. Record pumal entries in the order presented in the problem.

Answers

Ayayai Real Estate Agency's transactions for October are as follows:

1. Stockholders invest $29,100 in exchange for common stock.

2. Hires an administrative assistant with an annual salary of $30,000.

3. Purchases office furniture for $3,610 on account.

6. Sells a house and lot, earning commissions due from E.C. Roads amounting to $10,000.

10. Receives $130 in cash as a commission for acting as a rental agent.

27. Pays $600 on account for the office furniture purchased on October 3.

30. Pays the administrative assistant $2,500 in salary for October.

The journal entries for these transactions would be as follows:

Oct. 1:

Cash (or Accounts Receivable)       29,100

    Common Stock                                      29,100

    (To record stockholders' investment)

Oct. 2:

Salary Expense                                  2,500

    Cash                                                       2,500

    (To record payment of salary to the administrative assistant)

Oct. 3:

Office Furniture                             3,610

    Accounts Payable                                 3,610

    (To record the purchase of office furniture on account)

Oct. 6:

Accounts Receivable                          10,000

    Commission Revenue                              10,000

    (To record commissions earned from the sale to E.C. Roads)

Oct. 10:

Cash                                                        130

    Commission Revenue                               130

    (To record cash received for acting as a rental agent)

Oct. 27:

Accounts Payable                              600

    Cash                                                       600

    (To record payment on account for the office furniture)

Oct. 30:

Salary Expense                                   2,500

    Cash                                                       2,500

    (To record payment of salary to the administrative assistant)

These journal entries capture the financial transactions of Ayayai Real Estate Agency for the month of October, ensuring accurate recording of revenues, expenses, and investments.

To know more about Stockholders, visit,
https://brainly.com/question/29705807

#SPJ11

Rick's Sporting Goods is a wholesale distributor supplying a wide range of moderately priced sporting equipment to large chain stores. Rick's Sporting Goods has an enviable reputation for quality of its products. In fact, the demand for its products is so great that at times Rick's Sporting Goods cannot satisfy the demand and must delay or refuse some orders, in order to maintain its production quality. Additionally, Rick's Sporting Goods purchases some of its products from outside suppliers in order to meet the demand. These suppliers are carefully chosen so that their products maintain the quality image that Rick's Sporting Goods has attained.
About 60 percent of Rick's Sporting Goods' products are purchased from other companies while the remainder of the products are manufactured by Rick's Sporting Goods. The company has a Plastics Department that is currently manufacturing the boot for in-line skates. Rick's Sporting Goods is able to manufacture and sell 5,000 pairs of skates annually, making full use of its machine capacity at available workstations. Presented below are the selling price and costs associated with Rick's Sporting Goods' skates
Selling price per pair of skates $98
Costs per pair Molded plastic $8
Other direct materials 12
Machine time ($16/hr.) 24
Manufacturing overhead 18
Selling and admin. cost 15 77
Profit per pair $21
------
Because Rick's Sporting Goods believes it could sell 8,000 pairs of skates annually if it had sufficient
manufacturing capacity, the company has looked into the possibility of purchasing the skates for distribution.
Colcott Inc., a steady supplier of quality products, would be able to provide 6,000 pairs of skates per year at a price of $75 per pair delivered to Rick's Sporting Goods' facility.
Jack Potter, Rick's Sporting Goods' product manager, has suggested that the company could make better use of its Plastics Department by manufacturing snowboard bindings. To support his position, Potter has a market study that indicates an expanding market for snowboards and a need for additional suppliers. Potter believes that Rick's Sporting Goods could expect to sell 12,000 snowboard bindings annually at a price of $60 per binding. Potter's estimate of the costs to manufacture the bindings is presented below.
Selling price per snowboard binding $60
Costs per binding Molded plastic $16
Other direct materials 4 Machine time ($16/hr.) 8
Manufacturing overhead 6
Selling and admin. cost 14 48
Profit per binding $12
===
Other information pertinent to Rick's Sporting Goods' operations is presented below.
An allocated $6 fixed overhead cost per unit is included in the selling and administrative cost for all of the purchased and manufactured products. Total fixed and variable selling and administrative costs for the purchased skates would be $10 per pair.
In the Plastics Department, Rick's Sporting Goods uses machine hours as the application base for manufacturing overhead. Included in the manufacturing overhead for the current year is $30,000 of fixed, factory-wide manufacturing overhead that has been allocated to the Plastics Department.
*Company & Employee names have been changed.
==
REQUIRED:
1- To maximize Rick's Sporting Goods' profitability, recommend which product or products should be manufactured and/or purchased. 2- Prepare an analysis based on the data presented that will show the associated financial impact. Support your answer with appropriate calculations and strategic considerations. Please include other factors besides cost that Rick should take into consideration when making this decision.

Answers

To maximize Rick's Sporting Goods' profitability, it is recommended to consider both manufacturing and purchasing options.

For the skates, Rick's Sporting Goods should continue manufacturing them as it is currently utilizing its machine capacity and earning a profit of $21 per pair.

However, to meet the increased demand of 8,000 pairs annually, the company should also consider purchasing 2,000 pairs from Colcott Inc. at a cost of $75 per pair. This would allow Rick's Sporting Goods to meet the demand while maintaining profitability.

For the snowboard bindings, it is suggested to manufacture them as the profit per binding is $12, and there is a growing market for snowboards. By utilizing the Plastics Department to manufacture the bindings, Rick's Sporting Goods can tap into this expanding market and increase its profitability.

Financial Impact:

a. Skates:

Profit from manufacturing: 5,000 pairs x $21 = $105,000

Cost of purchasing from Colcott Inc.: 2,000 pairs x $75 = $150,000

Net impact: -$45,000

b. Snowboard Bindings:

Profit from manufacturing: 12,000 bindings x $12 = $144,000

Other Factors to Consider:

Besides cost, Rick's Sporting Goods should also consider factors such as quality control, production capacity, supplier reliability, customer demand, market trends, and the company's brand image.

By manufacturing some products in-house, Rick's Sporting Goods can maintain control over quality and ensure the products align with their reputation. Purchasing from reliable suppliers can help meet demand and expand product offerings.

It's crucial to strike a balance between cost-effectiveness, customer satisfaction, and maintaining a competitive edge in the market.

To learn more about profitability, visit here

https://brainly.com/question/31787267

#SPJ11

Analyse the effective of backward intergration. Provide examples to substantiate your response.

Answers

Backward integration refers to the process of a company expanding its operations to encompass its suppliers of raw materials. A firm that undertakes backward integration buys or creates businesses that supply the products or services that the company uses.

This is done to control costs, improve efficiency, and increase profits. It has been shown to be an effective strategy for companies seeking to gain a competitive advantage.

The following are some examples of successful backward integration: Apple Inc.Apple is a company that has succeeded in backward integration. In order to safeguard its supply chain, the tech giant has been actively working on backward integration.

Apple has been investing in the development of its processors to reduce dependence on external suppliers, as well as developing its proprietary application processors. Apple Inc.'s move to design its processors and manufacture them through TSMC is a backward integration strategy that has been successful. Walmart- Walmart, one of the largest retailers in the world, is another example of backward integration.

Walmart's strategy involves creating a single channel of distribution for goods. Walmart has been actively working on backward integration by purchasing its suppliers. It has achieved this by purchasing the rights to the products of its suppliers. In order to maintain quality control and guarantee that its products meet its standards, the company has taken the necessary steps.PepsiCoPepsiCo is a beverage and snack food company that is well-known for its backward integration strategy.

PepsiCo has achieved backward integration by owning some of its key suppliers. For instance, Frito-Lay is a subsidiary of PepsiCo. The company supplies a significant percentage of the raw materials used in the production of PepsiCo's snacks. PepsiCo has been able to guarantee the quality of its products and achieve better supply chain management as a result of its backward integration strategy.

To learn more about Backward integration, visit:

https://brainly.com/question/32631693

#SPJ11

The America Dog and Cat Hotel is a pet hotel located in Las Vegas. Assume that in March, when dog-days (occupancy) were at an annual low of 500, the average cost per dog-day was $14. In July, when dog-days were at a capacity level of 4,000, the average cost per dog-day was $7.
(a) Develop an equation for monthly operating costs. (Let X = dog-days per month)
Total cost =Answer
+ Answer
* X
(b) Determine the average cost per dog-day at an annual volume of 24,000 dog-days.

Answers

a) Monthly operating costs for the America Dog and Cat Hotel is given below:

Total cost = Fixed Cost + Variable Cost * X

Given:

When dog-days occupancy were at an annual low of 500, the average cost per dog-day was $14.

Then, the total cost for that month can be given as, 500 * $14 = $7,000

When dog-days occupancy were at a capacity level of 4,000, the average cost per dog-day was $7.Then, the total cost for that month can be given as, 4,000 * $7 = $28,000

Now, we can use the above two values to find out the fixed and variable costs.

Monthly Fixed Cost = Total Cost - (X * Variable Cost)When X = 500, Total Cost = $7,000, Variable Cost = $14

Fixed Cost = $7,000 - (500 * $14) = $-1,000

When X = 4000, Total Cost = $28,000, Variable Cost = $7Fixed Cost = $28,000 - (4,000 * $7) = $0

Now, we can put the above values in the formula of Monthly operating costs.

Total cost = Fixed Cost + Variable Cost * XTotal cost = $0 + $7 * X

Total cost = $7XMonthly operating costs equation is:

Total cost = $7X.   (Ans: $7X) b)

We are given that at an annual volume of 24,000 dog-days,

we have to find the average cost per dog-day.

Annual volume = 24,000 dog-days

Monthly volume = 24,000/12 = 2,000 dog-days

Using the formula of monthly operating costs, we can find the average cost per dog-day.

Total cost = $7X, X = 2,000 dog-daysTotal cost = $7 * 2,000 = $14,000

======================

Average cost per dog-day = Total cost/Number of dog-days

Average cost per dog-day = $14,000/24,000

Average cost per dog-day = $0.58333

The average cost per dog-day at an annual volume of 24,000 dog-days is $0.58333. (Ans: $0.58333)

To know more about operating visit :

https://brainly.com/question/30581198

#SPJ11

To add Line sparklines in the range F5:F10 based on the data in the range B5:E10, please follow these steps:

1. Select the range F5:F10.

2. Go to the "Insert" tab in the Excel ribbon

Answers

To add line sparklines in the range F5:F10 based on the data in the range B5:E10, follow these steps: Select the range F5:F10., Go to the "Insert" tab in the Excel ribbon.

Open the Excel spreadsheet and navigate to the worksheet containing the data.

Click and drag to select the range F5:F10 where you want to insert the line sparklines.

Switch to the "Insert" tab in the Excel ribbon at the top of the window.

Look for the "Sparklines" group within the "Insert" tab.

Click on the "Line" sparkline option to insert line sparklines.

A dialog box will appear where you need to specify the data range. In this case, the data range is B5:E10.

Select the data range B5:E10 by clicking and dragging over the cells containing the data.

Click "OK" to confirm and insert the line sparklines into the selected range F5:F10.

Now you should see line sparklines representing the data in the range B5:E10 within the range F5:F10.

Learn more about adding sparklines in Excel here: brainly.com/question/29541101

#SPJ11

What is Leaky Pipe’s optimal order quantity (i.e. EOQ)?
b. What is the optimal number of orders per year?
c. What is the optimal interval (in working days) between orders?
d. What is demand during the lead time?
e. What is the reorder point?
f. What is the inventory position immediately after an order has been placed?
g. What is the total annual cost of the inventory?

Answers

Answer:

Leaky Pipe’s optimal order quantity (i.e. EOQ):

The optimal order quantity for Leaky Pipe would be at the point where the carrying costs and ordering costs intersect. Mathematically, it would be at the square root of [(2SD) / H].

Here, S represents the annual demand, D represents the cost to place one order and H represents the annual holding cost per unit of inventory. For Leaky Pipe, this would be √[(2 x 3500 x 1) / 20] = 29.53. Hence, the optimal order quantity for Leaky Pipe would be 30 units.

Optimal number of orders per year: The optimal number of orders per year can be calculated by dividing the annual demand by the EOQ. Hence, for Leaky Pipe, the optimal number of orders per year would be 3500 / 30 = 116.67.

Since a fraction of an order cannot be placed, this would be rounded up to 117. Optimal interval (in working days) between orders: The optimal interval can be calculated by dividing the number of working days in a year by the optimal number of orders per year. Hence, for Leaky Pipe, the optimal interval would be 250 / 117 = 2.14 or 3 working days. Demand during the lead time: The demand during the lead time is 300 units.

This is the total demand during the time period between placing an order and receiving it.

Reorder point: The reorder point can be calculated by multiplying the demand during lead time by the number of days in the lead time and adding the safety stock. Hence, for Leaky Pipe, the reorder point would be (300 x 7) + 150 = 2250.

Inventory position immediately after an order has been placed: The inventory position immediately after an order has been placed would be zero since all inventory would have been exhausted prior to the order being placed.

Total annual cost of the inventory: The total annual cost of the inventory would be the sum of the annual holding cost and the annual ordering cost. Hence, for Leaky Pipe, this would be (20 x 30 / 2) + (3500 / 30) = $1173.33.

To know more about quantity visit :

https://brainly.com/question/14581760

#SPJ11

A trader at the brokerage firm FastEx receives an order to purchase 2,000 shares of stock XYZ. At the time the order was received the market price of XYZ (i.e., the midpoint of the best bid and ask quotes) was $50.00. The trader then proceeds to execute the order. Initially the trader is able to purchase 1,000 shares at $50.50. Due to lack of liquidity the trader waits until the following day to execute an additional 800 shares at $51.00. Because t1 .ice has risen the trader decides not to purchase any more shares. Five days later (t=7) the stock closes at $52. FastEx charges brokerage of $0.08 per share, What is the Implementation shortfall cost ($)? Select one: a. 1840 b. 1696 C. 1440 d. 1844

Answers

The implementation shortfall cost is the difference between the price the trader paid for the shares and the final closing price of the stock.The answer is not given in the options .

To calculate this cost, we need to consider the prices at which the trader purchased the shares and the brokerage fee.First, the trader purchased 1,000 shares at $50.50. This means the total cost of this purchase is 1,000 * $50.50 = $50,500.Next, the trader purchased an additional 800 shares at $51.00. This means the total cost of this purchase is 800 * $51.00 = $40,800.


Adding these two costs together, we get a total cost of $50,500 + $40,800 = $91,300.The trader also incurred a brokerage fee of $0.08 per share. So the total brokerage fee is (1,000 + 800) * $0.08 = $176.


To calculate the implementation shortfall cost, we subtract the total cost of the shares and the brokerage fee from the final closing price of the stock. The closing price is given as $52.00.Implementation shortfall cost = ($91,300 + $176) - ($52.00 * 2,000)= $91,476 - $104,000= -$12,524.Therefore, the implementation shortfall cost is -$12,524.

To know more about shortfall cost, refer to the link:

https://brainly.com/question/27332595#

#SPJ11

EX6-7 (Algo) The project information for the... The project information for the custom order project of the Air Control Company is presented here. Compute the early late activity times and slack times. Identify the critical path. How many days will the project take? × Answer is not complete.

Answers

Given the following project information for the custom order project of the Air Control Company, the early late activity times and slack times will be computed. Critical path will be identified and the number of days the project will take will be determined.

Late Start (LS): The latest time a task can start without delaying the finish time of the overall project. Late Finish (LF): The latest time a task can finish without delaying the finish time of the overall project. Slack Time: The maximum amount of time an activity can be delayed without delaying the project.   Computation of Early Start (ES), Early Finish (EF), Late Start (LS), Late Finish (LF),

LF for C = LS for C + Normal time for C = 28 + 8 = 36. LS for B = LF for D - Normal time for B = 30 - 4 = 26. LF for B = LS for B + Normal time for B = 26 + 6 = 32. LS for A = EF for B - Normal time for A = 32 - 6 = 26. LF for A = LS for A + Normal time for A = 26 + 5 = 31.   Computation of Slack Time (SL) SL for A = LS for A - ES for A = 26 - 26 = 0. SL for B = LS for B - ES for B = 26 - 5 = 21. SL for C = LS for C - ES for C = 28 - 5 = 23. SL for D = LS for D - ES for D = 26 - 11 = 15. SL for E = LS for E - ES for E = 28 - 13 = 15. SL for F = LS for F - ES for F = 26 - 15 = 11. SL for G = LS for G - ES for G = 0.   The critical path in the network is A-B-D-F-G, with a project duration of 30 days.

To know more about project visit:

https://brainly.com/question/28476409

#SPJ11

Calculate the first year of depreciation on a $1,000 asset using half-year convention assuming that the asset has an 8 year life and a 400% declining balance depreciation method. (Note - you will have

Answers

The first year of depreciation on a $1,000 asset using a half-year convention assuming that the asset has an 8-year life and a 400% declining balance depreciation method is $437.5.

Cost of asset = $1,000Life of asset = 8 yearsDepreciation method = 400% declining balance

The method used = Half-year convention

To calculate the depreciation amount for the first year of depreciation using the 400% declining balance depreciation method with a half-year convention we follow the following steps:

Step 1: Depreciation rate = 400% / 8

= 50% per year

Step 2: Depreciation rate for half year = 50% / 2

= 25%

Step 3: The first-year depreciation expense for the asset can be calculated as follows; For the first year (first 6 months):

Depreciation expense for 6 months = 25% of $1,000 = $250

For the second half of the year:

Depreciation expense for 6 months = 25% of ($1,000 - $250)

= $187.5

Total depreciation for the first year = $250 + $187.5

= $437.5

Therefore, the first-year depreciation for the asset using a half-year convention assuming that the asset has an 8-year life and a 400% declining balance depreciation method is $437.5.

Learn more about depreciation from the given link.

https://brainly.com/question/30531944

#SPJ11

Revenues generated by a new fad product are forecast as follows: Expenses are expected to be 50% of revenues, and working capital required in each year is expected to be 20% of revenues in the following year. The product requires an immedlate investment of $48,000 in plant and equipment. Required: a. What is the Initial investment in the product? Remember working capital. b. If the plant and equipment are depreclated over 4 years to a salvage value of zero using stralght-line depreclation. and the firm's tax rate is 40%, what are the project cash flows in each year? c. If the opportunity cost of capital is 15%, what is project NPV? d. What is project IRR? Complete this question by entering your answers in the tabs below. What is the initial investment in the product? Remember working capital.

Answers

Revenues generated by a new fad product are forecast as follows: Expenses are expected to be 50% of revenues, and working capital required in each year is expected to be 20% of revenues in the following year.

How to find?

The product requires an immediate investment of $48,000 in plant and equipment. The question requires us to determine the initial investment in the product.

So, the formula for calculating the initial investment is;

Initial investment = Investment in fixed assets + Net working capital (NWC)where Net Working Capital is the difference between current assets and current liabilities.

Now, let's find out the initial investment.

Investment in fixed assets= $48,000

Net working capital in year 0 (NWC0)= 20% of revenue in year 1

= 0.20 × $0

= $0.

Initial investment = $48,000 + $0

= $48,000.

The initial investment in the product is $48,000.

To know more on investment visit:

https://brainly.com/question/15105766

#SPJ11

Talk about the digital economy, digital enterprise, and digital society as the three main components of the digital world. then particularly go over what the term "digital enterprise" means, what makes it unique from brick and mortar businesses, etc. How, for instance, has Amazon been driving the digital transformation?

Answers

Amazon's digital enterprise model has disrupted traditional retail, redefined supply chains, and set new standards for digital business operations, making it a driving force in digital transformation.

The digital economy, digital enterprise, and digital society are three interconnected components that form the digital world. The digital economy refers to the economic activities driven by digital technologies, including online transactions, e-commerce, and digital services. It encompasses the exchange of goods, services, and information in a digital format.

A digital enterprise is a business that leverages digital technologies to enhance its operations, customer interactions, and overall performance. Unlike traditional brick-and-mortar businesses, digital enterprises primarily operate online, utilizing internet platforms, cloud computing, data analytics, and automation. They have a global reach, low overhead costs, and the ability to scale rapidly.

Amazon is a prime example of a company driving the digital transformation. Through its e-commerce platform, Amazon revolutionized the retail industry, enabling customers to purchase a vast range of products online. It introduced innovations like one-click ordering, personalized recommendations, and fast delivery services, reshaping consumer expectations.

To learn more about the enterprise model

https://brainly.com/question/31546209

#SPJ11

Describe the Characteristics of Integrated brand communication Management in terms of
1: Management focused on communication
2: Brand management at the level of corporate strategy rather then at the level of marketing
3: Management that captures emotions

Answers

The characteristics of Integrated Brand Communication Management in terms of management focused on communication, brand management at the level of corporate strategy rather than at the level of marketing, and management that captures emotions are discussed below.

1. Management focused on communication: Integrated Brand Communication Management focuses on communication, and the management is responsible for all forms of communication within the company. The goal of this management is to ensure that all communication within the company is consistent and effectively communicates the brand message.

2. Brand management at the level of corporate strategy rather than at the level of marketing: Integrated Brand Communication Management is a holistic approach that focuses on the brand's identity, image, and personality at the corporate level rather than the marketing level. This management is responsible for developing a comprehensive strategy that aligns with the company's vision, mission, and values.

3. Management that captures emotions: Integrated Brand Communication Management is about capturing emotions, and the management is responsible for creating a unique brand experience that resonates with the target audience. The goal of this management is to create an emotional connection between the brand and its customers, which will lead to long-term customer loyalty and advocacy.

In conclusion, Integrated Brand Communication Management is an approach that focuses on creating a consistent and effective message that resonates with the target audience. This management is responsible for communication within the company, brand management at the corporate level, and capturing emotions.

To learn more about Communication Management, here:

https://brainly.com/question/30914597

#SPJ11

1. As a real or simulated workplace activity, you must assist a
team to work innovatively on two different occasions.
You will need to plan innovation on both occasions and work
according to the proje

Answers

Innovation is crucial in any workplace. It helps businesses stay ahead of their competition by providing new and improved products and services. As a team leader, you need to assist your team to work innovatively on two different occasions.

To achieve this, you need to plan for innovation on both occasions and work according to the project goals. Here are some steps that you can take to assist your team to work innovatively:1. Define the project goals: You need to define the project goals and ensure that all team members understand what they are working towards.

This will help to motivate your team and keep them focused on the project goals.In conclusion, innovation is important in any workplace, and as a team leader, you need to assist your team to work innovatively on two different occasions. You can do this by defining the project goals, encouraging creativity, providing resources, providing feedback, and celebrating success.

To know more about products visit:

https://brainly.com/question/29423646

#SPJ11

Other Questions
Mr. Meadows Cookie Company makes a variety of chocolate chip cookies in the plant in Albion, Michigan. Based on orders received and forecasts of buying habits, it is estimated that the demand for the next four months is 860,1,250,610, and 980, expressed in thousands of cookles. During a 46day Period when there were 120 workers, the company produced 1.8 million cookies. Assume that the number of workdays over the four months are respectively 26,24,20, and 22 . There are currently 100 workers employed, and there is no starting inventory of cookies. a) What is the minimum constant workforce required to meet demand over the next four months? b) Assume that C F=$100 per thousand cookies per month, C H=$100, and C F=$200. Evaluate the cost of the plan derived in part (a). c) Formulate as a linear program. Be sure to define all variables and include the required constraints. d) Solve for the optimal solution. Information about the masses of two types ofpenguin in a wildlife park is shown below.a) The median mass of the emperor penguins is23 kg. Estimate the interquartile range for themasses of the emperor penguins.b) The interquartile range for the masses of the kingpenguins is 7 kg. Estimate the median mass of theking penguins.c) Give two comparisons between the masses ofthe emperor and king penguins.Cumulative frequencyEmperor penguins504030-20-10-0.1015 20 25Mass (kg)301015King penguins20Mass (kg)2530 (cosecx+2)(2cosx-1)=0 Suppose that Mr. A buys a December European call option on June 15, If in November the price of the underlying asset S is greater than K. Mr. A can exercise the option. oTrue oFalse Jane's marginal beneft per day from drinking coke is given in the table below. This shows that she values the first coke she drinks at$1.20, the second at$1.15, and so on. If the price of coke is$1.00, the marginal cost Jane is facing is:$1.20$1.15$0.95$1.0050.60 What is theme of the bohemian girl by Willa cather(excerpt) . A ray of light travels in a glass and exits into the air. The critical angle of the glass-air interface is 39 . Select possible correct pairs of angles of incident and refraction. 2 The speed of red light in glass A is faster than in glass B. Which of the following is/are TRUE? A. The index of refraction of B is higher than A. B. The speed of light in A is lower than in the air. C. The frequency of the red light is the same in both glasses. 3. Which of the following statement is/are TRUE about the polarization of waves? A. Sound waves can exhibit a polarization effect. B. Polarization is an orientation of an oscillation. C. Radiowave cannot be polarized because it is invisible. 4. Which of the following optical phenomena causes the change in the wavelength of a wave? A. Reflection B. Refraction C. Diffraction 5. Unpolarised light of intensity, I opasses through three polarisers as shown in FIGURE 2. The second and third polarizers are rotated at angles 1and 2relative to the vertical line. 2is set to 80 . What is/are the possible values of 1and I 2? 6. Which of the following optical elements always produce a virtual image? A. Positive lens B. Diverging lens C. Convex mirror 7. FIGURE 3 shows a television receiver which consists of a dish and the signal collector on a house roof. It receives radio waves from a long-distance transmitter containing information about television programs. Which statement is/are TRUE about the receiver? A. The receiver applies the effect of wave reflection. B. The receiver acts as a lens to focus received radiowaves. C. The receiver changes the wavelength of the received radio waves. 8. Which of the following lens has a positive focal length? 9. An image has twice the magnification of its object and is located on the opposite side of the object. The possible optical element(s) which can produce the condition is/are A. positive lens. B. concave lens. C. concave mirror. 10. An object and a converging mirror are positioned with the labelled focal point, F, as shown in FIGURE 4. Which ray(s) come(s) from the object's tip? FIGURE 4 11. Farhan has a far point of 90 cm. Which of the following is TRUE about her? A. He can use a concave mirror to correct her vision. B. He could not sharply see an object beyond 90 cm from his eyes. C. He can use contact lenses with negative optical power to correct her vision. The process of nominating presidential candidates is now controlled by O the public rather than party elites members of the party in Congress O the Electoral College the national party chairperson and the national executive committee all of the above FILL THE BLANK.The "tragedy of the commons" is a tragedy because __________________.A. everyone is too greedyB. no one intends for the commons to become ruinedC. there is too much democracyD. cows are sentientE. Oedipus blinds himself Pamela is buying a $242,000 home with a 30-year mortgage. She will makean 8% down payment. Use the table below to find her monthly PMI payment.Base-To-Loan %95.01% to 97%90.01% to 95%85.01% to 90%85% and UnderOA. $96.48OB. $144.72OC. $157.30OD. $151.01Fixed-Rate Loan30 yrs. 15 yrs.0.90% 0.79%0.78% 0.26%0.52% 0.23%0.32% 0.19%ARM 2% +1 Year Cap30 yrs.15 yrs.n/a0.92% 0.81%0.65%n/a0.37%0.54%0.26% Please use your own words and do not plagiarize in the following United States History question:Discuss the Pilgrims and the Puritans. What were the intentions of the Puritan Founders of the Mass Bay Colony? Why were dissenters dealt with so harshly in both England and America? A single phase transformer has 1000 turns in the primary and 1800 turns in the [10] secondary. The cross sectional area of the core is 100 sq.em. If the primary winding is connected to a 50 Hz supply at 500V, calculate the peak flux density and voltage induced in the secondary. A 25 KVA single phase transformer has 1000 turns in the primary and 160 turns on the secondary winding. The primary is connected to 1500V, 50Hz mains. Calculate a) primary and secondary currents on full load, b) secondary e.m.f, c) maximum flux in the core. Chin researched the amount of money 150 students earned per month from jobs held during the summer. He created a table of six sample means from his collected data. Sample Number Sample Mean ($) 1 208 2 235 3 245 4 207 5 205 6 210 Using his results, what is a valid prediction about the mean of the population? The predicted mean of the population will be less than 200. The predicted mean of the population will be less than 245. The predicted mean of the population will be more than 275. The predicted mean of the population will be more than 250. Discuss what is the difference between the short-time Fourier Transform (STFT) and the Fourier transform. Moreover, also discuss under which applications STFT is preferred over conventional Fourier transform. To validate the advantage of STFT over Fourier transform, read any SOUND file in MATLAB and plot its STFT and discuss what kind of additional information it provides as compared to Fourier transform. Hint: use MATLAB built in stft function to calculate the STFT of a signal. The recommended window length is 1024 and fft points 4096. Submit: Report that includes the plotted results using MATLAB and include the MATLAB source code. One of the key aspects of making ethical arguments is that the components of the argument need to match or line up. Actions are partially defined by the goal, or intention, and partially by the outcome or effect. Particularly in engineering, this link or match between what one is trying to do in the action and what is expected to result is important. For example, when we talked about the Amish, their system of governance of technology is aiming to make their community more tightly connected, and the mechanism to do this is limitation of technologies that would move them farther away from each other or change the culture. Drawing on your background knowledge, course materials and readings (A) describe a problem that a technology might be expected to solve. Calculate the cell potential of the following cell at 25.0oC: (10)CU|CU(CN)6^4-(0.224mol.dm^-3) CN-(0.122 mol.dm^-3)||H^+ (pH of 4.68)| H2(1.00 atm)(pt)[14] Jose and Rosa are looking for a condo. Their combined gross annual income is $71,000. The best mortgage rate offered by their bank is a 2.91 percent, five-year fixed rate compounded semi-annually with a 20 -year amortization. The annual property taxes are estimated at $1,570, and the annual heating costs are $1,590. Their personal debt consumption is $800 per month. Condo fees are estimated at $500 per month. The bank's guideline for TDS is 50 percent. Based on this information, what is the maximum monthly mortgage payment they could afford? The maximum monthly mortgage payment they could afford is $ (Round to the nearest cent.) 4. Sustainable technology and engineering innovation a) Green engineering approaches require us to consider the impact of our production on the environment. i. Define atom efficiency? Using an example, discuss how you can use this indicator to choose an environmentally friendly reaction pathway. (3 Marks) ii. Sustainable energy is a dynamic harmony between the equitable availability of energy intensive goods and services to all people and preservation of earth for the future generations [Tester et al. 2005]. 1) Is hydro power plant a sustainable power supply option? Discuss the pros and cons of this technology option. (4 Marks) 2) Is Carbon Capture and Storage (CCS) option carbon neutral? Give reasons in favour of your response. (2 Marks) b) Remanufacturing is the rebuilding of a product to the specifications of the original equipment manufactured (OEM) product using a combination of reuse, repair and new parts [Johnson and McCarthy 2014]. i. The amount of land required for upstream processes of one piece of new product ' P ' is 25Ha. Calculate the amount of land use that can be avoided with the production of 20 pieces of remanufactured product ' P '. Remanufacturing activities require 0.5Ha/ piece of P. The amount of landfill required is 1Ha if one piece of ' P ' is disposed after the end of life instead of remanufacturing. (3 Marks) ii. In a series of papers in 1970-74, Paul Ehrlich and John Holdren proposed the IPAT equation to estimate the overall impact of our economic activities on the environment. Consider a future situation where the human population is at 125% of current levels and the level of affluence is at 250% of current levels. If the technology in the future is 4 times better that the technologies at current levels, the environmental impacts of this future scenario will be reduced to what percentage of current levels. Suppose you are going to investigate a ferromagnetic crystalline sample with a curie temperature about 400 C, which technique you can apply to identify the magnetic structure, and explain how to separate the information from crystalline structure and magnetic structure (Tips: there are two cases)? A brick with a mass of 10 kg and a volume of 0.01 m is submerged in a fluid that has a density of 800 kg/m. The brick will sink in the fluid. O True O False